Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EQUILIBRIUM FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

A two phase Mach number description of the equilibrium flow of nitrogen in ducts

Some additional thermodynamic properties of the usual two-phase form which is linear in the moisture fraction are derived which are useful in the analysis of many kinds of duct flow. The method used is based on knowledge of the vapor pressure and Gibbs function as functions of temperature. With these, additional two-phase functions linear in moisture fraction are generated, which ultimately reveal that the squared ratio of mixture specific volume to mixture sound speed depends on liquid mass fraction and temperature in the same manner as do many weighted mean two-phase properties. This leads to a simple method of calculating two-phase Mach numbers for various duct flows. The matching of one- and two-phase flows at a saturated vapor point with discontinuous Mach number is also discussed.

Bursik, J. W.↗

Effect of non-equilibrium flow chemistry and surface catalysis on surface heating to AFE

The effect of nonequilibrium flow chemistry on the surface temperature distribution over the forebody heat shield on the Aeroassisted Flight Experiment (AFE) vehicle was investigated using a reacting boundary-layer code. Computations were performed by using boundary-layer-edge properties determined from global iterations between the boundary-layer code and flow field solutions from a viscous shock layer (VSL) and a full Navier-Stokes solution. Surface temperature distribution over the AFE heat shield was calculated for two flight conditions during a nominal AFE trajectory. This study indicates that the surface temperature distribution is sensitive to the nonequilibrium chemistry in the shock layer. Heating distributions over the AFE forebody calculated using nonequilibrium edge properties were similar to values calculated using the VSL program.

Stewart, David A.↗

Computation of non-equilibrium flow downstream of a plasma torch

Numerical solutions of the Navier-Stokes equations for compressible reacting flow in an axisymmetric geometry are presented for a nitrogen plasma torch with both thermal and chemical nonequilibrium. The Navier-Stokes equations are solved using a new axisymmetric finite element/finite volume formulation in which the convective flux is treated by an extension of the approximate Riemann solver due to Osher. The numerical scheme is validated by comparison with a previous solution of the same problem using a different computational scheme. Results obtained using two different models of nonthermal dissociation rates are compared to experimental data.

Harle, Christophe↗

Effect of non-equilibrium flow chemistry on the heating distribution over the MESUR forebody during a Martian entry

Effect of flow field properties on the heating distribution over a 140 deg blunt cone was determined for a Martian atmosphere using Euler, Navier-Stokes (NS), viscous shock layer (VSL), and reacting boundary layer (BLIMPK) equations. The effect of gas kinetics on the flow field and the surface heating distribution were investigated. Gas models with nine species and nine reactions were implemented into the codes. Effects of surface catalysis on the heating distribution were studied using a surface kinetics model having five reactions.

Chen, Yih-Kang↗

Non equilibrium flow in an arc-jet

A method for simulating the flow of a nitrogen plasma in thermodynamic nonequilibrium is described. The method relies on the modeling of the relevant physical and chemical phenomena and on a fully coupled implicit finite volume upwind numerical approximation of the governing equations. The results agree with experimental data.

Rostand, P.↗

A coupled implicit method for chemical non-equilibrium flows at all speeds

The present time-accurate coupled-solution procedure addresses the chemical nonequilibrium Navier-Stokes equations over a wide Mach-number range uses, in conjunction with the strong conservation form of the governing equations, five unknown primitive variables. The numerical tests undertaken address steady convergent-divergent nozzle flows with air dissociation/recombination, dump combustor flows with n-pentane/air chemistry, and unsteady nonreacting cavity flows.

Shuen, Jian-Shun↗

Turbulence modeling for non-equilibrium flows

Two projects are reported. The first is the development and testing of an eddy viscosity transport model. This project also is a starting point for our work on developing computational tools for solving turbulence models in complex geometries. The second project is a stochastic analysis of the realizability of Reynolds stress transport models.

Durbin, Paul A.↗

Equilibrium gas flow computations. I - Accurate and efficient calculation of equilibrium gas properties

This paper treats the accurate and efficient calculation of thermodynamic properties of arbitrary gas mixtures for equilibrium flow computations. New improvements in the Stupochenko-Jaffe model for the calculation of thermodynamic properties of diatomic molecules are presented. A unified formulation of equilibrium calculations for gas mixtures in terms of irreversible entropy is given. Using a highly accurate thermo-chemical data base, a new, efficient and vectorizable search algorithm is used to construct piecewise interpolation procedures with generate accurate thermodynamic variable and their derivatives required by modern computational algorithms. Results are presented for equilibrium air, and compared with those given by the Srinivasan program.

Liu, Yen↗

Predicted Gas Properties in the Shock Layer Ahead of Capsule-Type Vehicles at Angles of Attack

A method for determining shock-wave shapes, stagnation-point location, and flow-field properties for spherically blunt bodies at angle of attack was developed. The method is applicable to perfect gas flows and equilibrium flow of real gases. The results given by the method for shock surface and stagnation-point location are compared with experimental values. Comparison of the shock-layer density and temperature distribution are also made between the results of the method and those of a more exact procedure for a sphere. These comparisons indicate satisfactory agreement.

REENTRY↗

Further shock tunnel studies of scramjet phenomena

Scramjet phenomena were studied using the shock tunnel T3 at the Australian National University. Simple two dimensional models were used with a combination of wall and central injectors. Silane as an additive to hydrogen fuel was studied over a range of temperatures and pressures to evaluate its effect as an ignition aid. The film cooling effect of surface injected hydrogen was measured over a wide range of equivalence. Heat transfer measurements without injection were repeated to confirm previous indications of heating rates lower than simple flat plate predictions for laminar boundary layers in equilibrium flow. The previous results were reproduced and the discrepancies are discussed in terms of the model geometry and departures of the flow from equilibrium. In the thrust producing mode, attempts were made to increase specific impulse with wall injection. Some preliminary tests were also performed on shock induced ignition, to investigate the possibility in flight of injecting fuel upstream of the combustion chamber, where it could mix but not burn.

Morgan, R. G.↗

Building wakes in disturbed layers

The wind profiles in the wakes of buildings in a disturbed shear layer are investigated for conditions experienced during aircraft take-off and landing. Experiments were conducted in a pipe flow apparatus in which an equilibrium flow is disturbed by pipe roughness, simulating obstacles upwind of a building, with the disturbed flow made to flow past a second obstacle, simulating a building. Velocity and turbulence profiles of disturbed and equilibrium flows upstream and downstream of the obstacles are presented. It is concluded that the integrated momentum flow of a boundary layer behind an obstacle can be greater than the upstream momentum flow, if the exponent of the upstream velocity profile is sufficiently high and the boundary layer has been disturbed by upstream obstacles. The rise of the turbulence level behind the obstacle is also dependent on the profile exponent in a disturbed layer.

Logan, E.↗

Nonlinear problems in flight dynamics involving aerodynamic bifurcations

Aerodynamic bifurcation is defined as the replacement of an unstable equilibrium flow by a new stable equilibrium flow at a critical value of a parameter. A mathematical model of the aerodynamic contribution to the aircraft's equations of motion is amended to accommodate aerodynamic bifurcations. Important bifurcations such as, the onset of large-scale vortex-shedding are defined. The amended mathematical model is capable of incorporating various forms of aerodynamic responses, including those associated with dynamic stall of airfoils.

Tobak, M.↗

Nonlinear problems in flight dynamics involving aerodynamic bifurcations

Aerodynamic bifurcation is defined as the replacement of an unstable equilibrium flow by a new stable equilibrium flow at a critical value of a parameter. A mathematical model of the aerodynamic contribution to the aircraft's equations of motion is amended to accommodate aerodynamic bifurcations. Important bifurcations such as, the onset of large-scale vortex shedding are defined. The amended mathematical model is capable of incorporating various forms of aerodynamic responses, including those associated with dynamic stall of airfoils.

Murray Tobak↗

A new formulation of the conservation equations of fluid dynamics

The computation of time-dependent flows has inspired a new, higher-dimensional formulation of the conservation equations of fluid dynamics in which time is treated as a fourth coordinate. The formulation is derived for a constant-density flow, and then extended to a variable-density flow by introducing a fifth, fictitious coordinate. This new coordinate can also act as a source coordinate, so that external source terms can be included. The analysis is carried out for both incompressible, stratified flow, and compressible equilibrium flow. The results are then extended to non-equilibrium and magnetohydrodynamic flows. Several applications of the new formulation to the computation of time-dependent flows are discussed.

Vinokur, M.↗

Numerical simulation of hypersonic inlet flows with equilibrium or finite rate chemistry

An efficient numerical program incorporated with comprehensive high temperature gas property models has been developed to simulate hypersonic inlet flows. The computer program employs an implicit lower-upper time marching scheme to solve the two-dimensional Navier-Stokes equations with variable thermodynamic and transport properties. Both finite-rate and local-equilibrium approaches are adopted in the chemical reaction model for dissociation and ionization of the inlet air. In the finite rate approach, eleven species equations coupled with fluid dynamic equations are solved simultaneously. In the local-equilibrium approach, instead of solving species equations, an efficient chemical equilibrium package has been developed and incorporated into the flow code to obtain chemical compositions directly. Gas properties for the reaction products species are calculated by methods of statistical mechanics and fit to a polynomial form for C(p). In the present study, since the chemical reaction time is comparable to the flow residence time, the local-equilibrium model underpredicts the temperature in the shock layer. Significant differences of predicted chemical compositions in shock layer between finite rate and local-equilibrium approaches have been observed.

Yu, Sheng-Tao↗

A survey of upwind methods for flows with equilibrium and non-equilibrium chemistry and thermodynamics

Several versions of flux-vector split and flux-difference split algorithms were compared with regard to general applicability and complexity. Test computations were performed using curve-fit equilibrium air chemistry for an M = 5 high-temperature inviscid flow over a wedge, and an M = 24.5 inviscid flow over a blunt cylinder for test computations; for these cases, little difference in accuracy was found among the versions of the same flux-split algorithm. For flows with nonequilibrium chemistry, the effects of the thermodynamic model on the development of flux-vector split and flux-difference split algorithms were investigated using an equilibrium model, a general nonequilibrium model, and a simplified model based on vibrational relaxation. Several numerical examples are presented, including nonequilibrium air chemistry in a high-temperature shock tube and nonequilibrium hydrogen-air chemistry in a supersonic diffuser.

Grossman, B.↗