Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTRON C”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Simulated projections of boreal forest peatland ecosystem productivity are sensitive to observed seasonality in leaf physiology

We quantified seasonal CO 2 assimilation capacities for seven dominant vascular species in a wet boreal forest peatland then applied data to a land surface model parametrized to the site (ELM-SPRUCE) to test if seasonality in photosynthetic parameters results in differences in simulated plant responses to elevated CO 2 and temperature. We collected seasonal leaf-level gas exchange, nutrient content and stand allometric data from the field-layer community (i.e., Maianthemum trifolium (L.) Sloboda), understory shrubs ( Rhododendron groenlandicum (Oeder) Kron and Judd, Chamaedaphne calyculata (L.) Moench., Kalmia polifolia Wangenh. and Vaccinium angustifolium Alton.) and overstory trees ( Picea mariana (Mill.) B.S.P. and Larix laricina (Du Roi) K. Koch). We found significant interspecific seasonal differences in specific leaf area, nitrogen content (by area; N a ) and photosynthetic parameters (i.e., maximum rates of Rubisco carboxylation (V cmax25°C ), electron transport (J max25°C ) and dark respiration (R d25°C )), but minimal correlation between foliar Na and V cmax25°C , J max25°C or R d25°C , which illustrates that nitrogen alone is not a good correlate for physiological processes such as Rubisco activity that can change seasonally in this system. ELM-SPRUCE was sensitive to the introduction of observed interspecific seasonality in V cmax25°C , J max25°C and R d25°C , leading to simulated enhancement of net primary production (NPP) using seasonally dynamic parameters as compared with use of static parameters. This pattern was particularly pronounced under simulations with higher temperature and elevated CO 2 , suggesting a key hypothesis to address with future empirical or observational studies as climate changes. As a result, inclusion of species-specific seasonal photosynthetic parameters should improve estimates of boreal ecosystem-level NPP, especially if impacts of seasonal physiological ontogeny can be separated from seasonal thermal acclimation.

54 ENVIRONMENTAL SCIENCES↗

Electronic Components and Circuits for Extreme Temperature Environments

Planetary exploration missions and deep space probes require electrical power management and control systems that are capable of efficient and reliable operation in very low temperature environments. Presently, spacecraft operating in the cold environment of deep space carry a large number of radioisotope heating units in order to maintain the surrounding temperature of the on-board electronics at approximately 20 C. Electronics capable of operation at cryogenic temperatures will not only tolerate the hostile environment of deep space but also reduce system size and weight by eliminating or reducing the radioisotope heating units and their associate structures; thereby reducing system development as well as launch costs. In addition, power electronic circuits designed for operation at low temperatures are expected to result in more efficient systems than those at room temperature. This improvement results from better behavior and tolerance in the electrical and thermal properties of semiconductor and dielectric materials at low temperatures. The Low Temperature Electronics Program at the NASA Glenn Research Center focuses on research and development of electrical components, circuits, and systems suitable for applications in the aerospace environment and deep space exploration missions. Research is being conducted on devices and systems for reliable use down to cryogenic temperatures. Some of the commercial-off-the-shelf as well as developed components that are being characterized include switching devices, resistors, magnetics, and capacitors. Semiconductor devices and integrated circuits including digital-to-analog and analog-to-digital converters, DC/DC converters, operational amplifiers, and oscillators are also being investigated for potential use in low temperature applications. An overview of the NASA Glenn Research Center Low Temperature Electronic Program will be presented in this paper. A description of the low temperature test facilities along with selected data obtained through in-house component and circuit testing will also be discussed. Ongoing research activities that are being performed in collaboration with various organizations will also be presented.

Patterson, Richard L.↗

Electrical Devices and Circuits for Low Temperature Space Applications

The environmental temperature in many NASA missions, such as deep space probes and outer planetary exploration, is significantly below the range for which conventional commercial-off-the-shelf electronics is designed. Presently, spacecraft operating in the cold environment of such deep space missions carry a large number of radioisotope or other heating units in order to maintain the surrounding temperature of the on-board electronics at approximately 20 C. Electronic devices and circuits capable of operation at cryogenic temperatures will not only tolerate the harsh environment of deep space but also will reduce system size and weight by eliminating or reducing the heating units and their associate structures; thereby reducing system development cost as well as launch costs. In addition, power electronic circuits designed for operation at low temperatures are expected to result in more efficient systems than those at room temperature. This improvement results from better behavior in the electrical and thermal properties of some semiconductor and dielectric materials at low temperatures. An on-going research and development program on low temperature electronics at the NASA Glenn Research Center focuses on the development of efficient electrical systems and circuits capable of surviving and exploiting the advantages of low temperature environments. An overview of the program will be presented in this paper. A description of the low temperature test facilities along with selected data obtained from in-house component testing will also be discussed. On-going research activities that are being performed in collaboration with various organizations will also be presented.

Patterson, R. L.↗

Packaging Technologies for 500 C SiC Electronics and Sensors: Challenges in Material Science and Technology

This paper presents ceramic substrates and thick-film metallization based packaging technologies in development for 500C silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-based chip-level packages with gold (Au) thick-film metallization have been electrically characterized at temperatures up to 550C. The 96 alumina packaging system composed of chip-level packages and PCBs has been successfully tested with high temperature SiC discrete transistor devices at 500C for over 10,000 hours. In addition to tests in a laboratory environment, a SiC junction field-effect-transistor (JFET) with a packaging system composed of a 96 alumina chip-level package and an alumina printed circuit board was tested on low earth orbit for eighteen months via a NASA International Space Station experiment. In addition to packaging systems for electronics, a spark-plug type sensor package based on this high temperature interconnection system for high temperature SiC capacitive pressure sensors was also developed and tested. In order to further significantly improve the performance of packaging system for higher packaging density, higher operation frequency, power rating, and even higher temperatures, some fundamental material challenges must be addressed. This presentation will discuss previous development and some of the challenges in material science (technology) to improve high temperature dielectrics for packaging applications.

dielectric properties↗

Electronic structures of C u 2 O , C u 4 O 3 , and CuO: A joint experimental and theoretical study

We present a joint experimental and theoretical study for the electronic structures of copper oxides including Cu 2 O, CuO, and the metastable mixed-valence oxide Cu 4 O 3 . The optical band gap is determined by experimental optical absorption coefficient, and the electronic structure in valence and conduction bands is probed by photoemission and electron energy loss spectroscopies, respectively. Furthermore, we compare our experimental results with many-body GW calculations utilizing an additional on-site potential for d-orbital energies that facilitates tractable and predictive computations. The side-by-side comparison between the three oxides, including a band insulator (Cu2O) and two Mott/charge-transfer insulators (CuO, Cu 4 O 3 ) leads to a consistent picture for the optical and band-structure properties of the Cu oxides, strongly supporting indirect band gaps of about 1.2 and 0.8 eV in CuO and Cu 4 O 3 , respectively. This comparison also points towards surface oxidation and reduction effects that can complicate the interpretation of the photoemission spectra.

36 MATERIALS SCIENCE↗

Electronic structure of C and N co-doped TiO{sub 2}: A combined hard x-ray photoemission spectroscopy and density functional theory study

We have studied the electronic structure of C and N co-doped TiO{sub 2} using hard x-ray photoelectron spectroscopy and first-principles density functional theory calculations. Our results reveal overlap of the 2p states of O, N, and C in the system which shifts the valence band maximum towards the Fermi level. Combined with optical data we show that co-doping is an effective route for band gap reduction in TiO{sub 2}. Comparison of the measured valence band with theoretical photoemission density of states reveals the possibility of C on Ti and N on O site.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasma Interaction with Electron-Emitting Surfaces

Electron emission from surfaces occurs in many plasma systems. Several types including secondary, thermionic and photon-induced emissions are intense under certain conditions. Understanding the effects of emission on the sheaths that govern plasma-surface interaction is important. This dissertation predicts some emitting sheath phenomena that were not reported in past studies. For example, most previous theoretical models assumed that an emitting sheath potential is always negative and that ions always accelerate into the wall. We show when the emission is intense that the sheath potential can become positive, fundamentally changing how the plasma and wall interact. In this inverse sheath state, ions are repelled, suggesting for instance that (a) no presheath exists in the plasma interior, (b) emitting walls could be used in applications to stop sputtering. Another topic considered is the transit of emitted electrons across the plasma to other surfaces, which is possible in low collisionality plasma systems. When transit occurs, the flux balance is a complex global problem where the sheaths at opposite surfaces are coupled through their exchange of emitted electrons. We also show that secondary emission can trigger a variety of sheath instability phenomena that change the state of the plasma-wall system or cause oscillations preventing steady state. Lastly, we analyze a mechanism where emitted electrons return to the same surface and knock out secondaries, which return and knock out more secondaries, etc., feedback amplifying the emission intensity. The four phenomena will be analyzed theoretically and verified with particle-in-cell simulations: (a) inverse sheath, (b) sheath coupling via transiting electrons, (c) sheath instabilities, (d) returning electron amplification. Consequences of these processes on the sheath potentials, wall heating, loss rate of charge, and cross field transport (near-wall conductivity) are discussed throughout. Possible implications are suggested for fusion machines, plasma propulsion engines, probes, dusty plasmas, RF discharges, and surfaces in space.

Fusion↗

High-resolution photoelectron imaging of cold C{sub 60}{sup −} anions and accurate determination of the electron affinity of C{sub 60}

High-resolution photoelectron imaging and spectroscopy of cold C{sub 60}{sup −} anions are reported using a newly built photoelectron imaging apparatus coupled with an electrospray ionization source and a temperature-controlled cryogenic ion trap. Vibrationally resolved photoelectron spectra are obtained for the detachment transition from the ground state of C{sub 60}{sup −} to that of C{sub 60} at various detachment wavelengths from 354.84 nm to 461.35 nm. The electron affinity of C{sub 60} is accurately measured to be 2.6835 ± 0.0006 eV. Numerous unexpected vibrational excitations are observed in the photoelectron spectra due to the Jahn-Teller effect in C{sub 60}{sup −} and Hertzberg-Teller vibronic coupling in both C{sub 60}{sup −} and C{sub 60}. Both the relative intensities of vibrational peaks and their photoelectron angular distributions provide evidence for the vibronic couplings. The observed p-wave-like behavior in the angular distribution of the 0{sub 0}{sup 0} transition suggests that the electron is detached from an s-type orbital.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles study of electronic states in Mg{sub 2}C

The electronic properties of magnesium methanide Mg{sub 2}C are reported. Investigations are carried out applying the linear combination of atomic orbitals method. After settling ground state of the antifluorite structure the electronic band structure calculations are undertaken using PBE-GGA exchange and correlation functional and PBE0 hybrid functional. All calculations show that Mg{sub 2}C has indirect band gap with conduction band minimum at Γ and valence band maximum at the X point. The values of band gap from PBE and the PBE0 are 2.05 and 3.46 eV respectively. In comparison to beryllium methanide the electronic bands are flat suggesting ionic nature of bonding.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron and ion temperatures - A comparison of ground-based incoherent scatter and AE-C satellite measurements

The paper presents the results of comparisons of AE-C electron temperature of the ionosphere determined from the cylindrical electrostatic probe and the ion temperature of the ionosphere determined from the planar retarding potential analyzer with electron and ion temperatures determined from four incoherent scatter facilities: Arecibo, St. Santin, Millstone Hill, and Chatanika. Good agreement was obtained between the in situ and remote measurements of electron and ion temperatures. Longitudinal variations are found to be very important in the comparison of electron temperatures at some locations.

Benson, R. F.↗

RELATION BETWEEN THE CORONAL MASS EJECTION ACCELERATION AND THE NON-THERMAL FLARE CHARACTERISTICS

We investigate the relationship between the main acceleration phase of coronal mass ejections (CMEs) and the particle acceleration in the associated flares as evidenced in Reuven Ramaty High Energy Solar Spectroscopic Imager non-thermal X-rays for a set of 37 impulsive flare-CME events. Both the CME peak velocity and peak acceleration yield distinct correlations with various parameters characterizing the flare-accelerated electron spectra. The highest correlation coefficient is obtained for the relation of the CME peak velocity and the total energy in accelerated electrons (c = 0.85), supporting the idea that the acceleration of the CME and the particle acceleration in the associated flare draw their energy from a common source, probably magnetic reconnection in the current sheet behind the erupting structure. In general, the CME peak velocity shows somewhat higher correlations with the non-thermal flare parameters than the CME peak acceleration, except for the spectral index of the accelerated electron spectrum, which yields a higher correlation with the CME peak acceleration (c Almost-Equal-To -0.6), indicating that the hardness of the flare-accelerated electron spectrum is tightly coupled to the impulsive acceleration process of the rising CME structure. We also obtained high correlations between the CME initiation height h{sub 0} and the non-thermal flare parameters, with the highest correlation of h{sub 0} to the spectral index {delta} of flare-accelerated electrons (c Almost-Equal-To 0.8). This means that CMEs erupting at low coronal heights, i.e., in regions of stronger magnetic fields, are accompanied by flares that are more efficient at accelerating electrons to high energies. In the majority of events ({approx}80%), the non-thermal flare emission starts after the CME acceleration, on average delayed by Almost-Equal-To 6 minutes, in line with the standard flare model where the rising flux rope stretches the field lines underneath until magnetic reconnection sets in. We find that the current sheet length at the onset of magnetic reconnection is 21 {+-} 7 Mm. The flare hard X-ray peaks are well synchronized with the peak of the CME acceleration profile, and in 75% of the cases they occur within {+-}5 minutes. Our findings provide strong evidence for the tight coupling between the CME dynamics and the particle acceleration in the associated flare in impulsive events, with the total energy in accelerated electrons being closely correlated with the peak velocity (and thus the kinetic energy) of the CME, whereas the number of electrons accelerated to high energies is decisively related to the CME peak acceleration and the height of the pre-eruptive structure.

79 ASTRONOMY AND ASTROPHYSICS↗

An Advanced Extreme Environment Wireless Telemetry System for Turbine Blade Instrumentation

As advanced natural gas power generation systems evolve, the thrust for increased efficiencies and reduced emissions results in increasingly harsh conditions inside the turbine environment. These high temperatures, pressures, and corrosive atmospheres result in accelerated rates of degradation, leading to failure of turbine materials and components. The University of Arkansas (UA) and Siemens, in collaboration with the DoE's National Energy Technology Laboratory (NETL), are developing a reliable and long-term monitoring capability in the turbine hot gas path in the form of novel ceramic-based thermocouples and integrated wide band gap instrumentation electronics that will contribute to the overall reliability of gas turbines. When equipped with better monitoring and controls, power plants can operate with increased fuel-burning efficiency, improved process dynamics and gas concentrations, and increased overall longevity of the power plant components. This will result in increased turbine availability and a reduction in outages and maintenance costs. One of the key aspects to driving forward turbine monitoring capability is the development of high temperature capable integrated circuit (IC) electronics. Previous papers have described 500 °C + electronics that were developed primarily from a combination of discrete single transistors combined with supporting high temperature passive components. While these circuits have been tested successfully in high temperature spin test environments, the move to an IC approach will greatly increase the performance and reliability of turbine monitoring systems. This program is developing such capability through the implementation of silicon carbide (SiC) based ICs, and this paper details the initial approach and early testing of the developed devices. This research represents an important step towards the realization of a field deployable high reliability turbine condition monitoring system.

47 OTHER INSTRUMENTATION↗

Role of cascade and Auger effects in the enhanced population of the C{sup 3+}(1s2s2p {sup 4}P) states following single-electron capture in C{sup 4+}(1s2s {sup 3}S)-He collisions

The population of excited three-electron states in carbon ions after single-electron capture in 0.5-1.1 MeV/amu C{sup 4+}(1s2s {sup 3}S)-He collisions is analyzed theoretically by combining different methods. While the two-center basis generator method is used to calculate capture amplitudes on the single-particle level, all-electron structure calculations for the relevant C{sup 3+} states and their radiative and Auger transition rates are performed on the multiconfiguration Dirac-Fock level. These data are then combined and fed into a set of classical rate equations for the decay dynamics. Total cross sections for the production of the 1s2s2p {sup 4}P, 1s2s2p {sup 2}P{sub -}, and 1s2s2p {sup 2}P{sub +} states are calculated and their ratios compared with recent experimental data and previous calculations [D. Strohschein et al., Phys. Rev. A 77, 022706 (2008)]. It is found that the relative intensities of the 1s2s2p {sup 4}P states are considerably larger than expected on the basis of pure spin statistics. The Auger transitions, which were not included in the previous calculations, have a significant effect on the final results in that they reduce the 1s2s2p {sup 2}P intensities. Although our extended computations explain a significant part of the production of the 1s2s2p {sup 4}P states, the experimentally observed enhancement of these states is still considerably larger than the theoretical one.

74 ATOMIC AND MOLECULAR PHYSICS↗

Dissociative electron attachment to C{sub 2}F{sub 5} radicals

Dissociative electron attachment to the reactive C{sub 2}F{sub 5} molecular radical has been investigated with two complimentary experimental methods; a single collision beam experiment and a new flowing afterglow Langmuir probe technique. The beam results show that F{sup -} is formed close to zero electron energy in dissociative electron attachment to C{sub 2}F{sub 5}. The afterglow measurements also show that F{sup -} is formed in collisions between electrons and C{sub 2}F{sub 5} molecules with rate constants of 3.7 Multiplication-Sign 10{sup -9} cm{sup 3} s{sup -1} to 4.7 Multiplication-Sign 10{sup -9} cm{sup 3} s{sup -1} at temperatures of 300-600 K. The rate constant increases slowly with increasing temperature, but the rise observed is smaller than the experimental uncertainty of 35%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Time dependence of the electronic structure of an electron-beam-irradiated C{sub 60} film

Time dependence of the electronic structure of an electron-beam (EB) irradiated C{sub 60} film (20-30 nm thick) has been examined using in situ high-resolution ultraviolet photoelectron spectroscopy. It is found that the electronic states of the C{sub 60} film have been changed continuously from an insulator (pristine C{sub 60} films) to a semiconductor and finally to a metal as EB-irradiation time increased. This can be explained by the increase in polymerization degree of a C{sub 60} polymer with a given cross-linked structure derived from the general Stone-Wales rearrangement from [Beu et al.,Phys. Rev. B 72, 155416 (2005)]. In addition, this finding suggests that the electronic properties of the C{sub 60} film can be controlled only in the EB-irradiated region by varying the irradiation time, which is interesting when applied to electronic devices.

36 MATERIALS SCIENCE↗