Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTROMOTIVE FORCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Preparation of W-Ta thin-film thermocouple on diamond anvil cell for in-situ temperature measurement under high pressure

In this paper, a W-Ta thin-film thermocouple has been integrated on a diamond anvil cell by thin-film deposition and photolithography methods. The thermocouple was calibrated and its thermal electromotive force was studied under high pressure. The results indicate that the thermal electromotive force of the thermocouple exhibits a linear relationship with temperature and is not associated with pressure. The resistivity measurement of ZnS powders under high pressure at different temperatures shows that the phase transition pressure decreases as the temperature increases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Inductance due to spin current

The inductance of spintronic devices that transport charge neutral spin currents is discussed. It is known that in a media that contains charge neutral spins, a time-varying electric field induces a spin current. We show that since the spin current itself produces an electric field, this implies existence of inductance and electromotive force when the spin current changes with time. The relations between the electromotive force and the corresponding flux, which is a vector calculated by the cross product of electric field and the trajectory of the device, are clarified. The relativistic origin generally renders an extremely small inductance, which indicates the advantage of spin current in building low inductance devices. The same argument also explains the inductance due to electric dipole current and applies to physical dipoles consist of polarized bound charges.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SIMULATIONS OF TURBULENT DYNAMOS DRIVEN BY THE MAGNETIC HELICITY FLUX

We present results of numerical simulations of driven magnetohydrodynamic turbulence in a periodic box with an imposed large-scale sinusoidal shear. We produce strong large-scale magnetic fields through dynamo action. This dynamo action is highly dependent on the spectral properties of the forcing function. In particular, we can produce either dynamo or antidynamo action by choosing particular forcing functions for the small-scale turbulence. Our results show that the large-scale electromotive force is well correlated with the local accumulation of eddy-scale magnetic helicity. Conversely, the electromotive force is very weakly correlated with the large-scale magnetic field strength or its product with kinetic helicity. We argue that in these simulations large-scale dynamo action is driven by an inverse cascade of magnetic helicity, ultimately caused by the tendency of anisotropic turbulence to create a magnetic helicity flux.

79 ASTRONOMY AND ASTROPHYSICS↗

Conversion of pure spin current to charge current in amorphous bismuth

Spin Hall angle and spin diffusion length in amorphous bismuth (Bi) are investigated by using conversion of a pure spin current to a charge current in a spin pumping technique. In Bi/Ni{sub 80}Fe{sub 20}/Si(100) sample, a clear direct current (DC) electromotive force due to the inverse spin Hall effect of the Bi layer is observed at room temperature under a ferromagnetic resonance condition of the Ni{sub 80}Fe{sub 20} layer. From the Bi thickness dependence of the DC electromotive force, the spin Hall angle and the spin diffusion length of the amorphous Bi film are estimated to be 0.02 and 8 nm, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Vehicle to wireless power transfer coupling coil alignment sensor

A non-contacting position sensing apparatus includes at least one vehicle-mounted receiver coil that is configured to detect a net flux null when the vehicle is optimally aligned relative to the primary coil in the charging device. Each of the at least one vehicle-mounted receiver coil includes a clockwise winding loop and a counterclockwise winding loop that are substantially symmetrically configured and serially connected to each other. When the non-contacting position sensing apparatus is located directly above the primary coil of the charging device, the electromotive forces from the clockwise winding loop and the counterclockwise region cancel out to provide a zero electromotive force, i.e., a zero voltage reading across the coil that includes the clockwise winding loop and the counterclockwise winding loop.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A STABLE, ACCURATE METHODOLOGY FOR HIGH MACH NUMBER, STRONG MAGNETIC FIELD MHD TURBULENCE WITH ADAPTIVE MESH REFINEMENT: RESOLUTION AND REFINEMENT STUDIES

Performing a stable, long-duration simulation of driven MHD turbulence with a high thermal Mach number and a strong initial magnetic field is a challenge to high-order Godunov ideal MHD schemes because of the difficulty in guaranteeing positivity of the density and pressure. We have implemented a robust combination of reconstruction schemes, Riemann solvers, limiters, and constrained transport electromotive force averaging schemes that can meet this challenge, and using this strategy, we have developed a new adaptive mesh refinement (AMR) MHD module of the ORION2 code. We investigate the effects of AMR on several statistical properties of a turbulent ideal MHD system with a thermal Mach number of 10 and a plasma {beta}{sub 0} of 0.1 as initial conditions; our code is shown to be stable for simulations with higher Mach numbers (M{sub rms}= 17.3) and smaller plasma beta ({beta}{sub 0} = 0.0067) as well. Our results show that the quality of the turbulence simulation is generally related to the volume-averaged refinement. Our AMR simulations show that the turbulent dissipation coefficient for supersonic MHD turbulence is about 0.5, in agreement with unigrid simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Equation-of-motion approach of spin-motive force

We formulate a quantitative theory of an electromotive force of spin origin, i.e., spin-motive force, by the equation-of-motion approach. In a ferromagnetic metal, electrons couple to the local magnetization via the exchange interaction. The electrons are affected by spin dependent forces due to this interaction and the spin-motive force and the anomalous Hall effect appears. We have revealed that the origin of these phenomena is a misalignment between the conduction electron spin and the local magnetization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unified theory of spin and charge in a ferromagnet

Here, we derive a unified theory of spin and charge degrees of freedom in a ferromagnet. The spin-transfer torque and spin electromotive force are examined from the coarse-grained perspective of collective coordinates. The resulting equations of motion reflect a balance of conservative, gyroscopic (Berry-phase), and dissipative forces. We then expand the space of collective coordinates by adding the electric charge. The adiabatic spin-transfer torque and spin electromotive force (emf) turn out to be a gyroscopic force; their nonadiabatic counterparts are a dissipative force.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Generation of coherent magnetic fields in sheared inhomogeneous turbulence: No need for rotation?

Coherent magnetic fields are often believed to be generated by the combination of stretching by differential rotation and turbulent amplification of magnetic field, via the so-called {alpha} effect. The latter is known to exist in helical turbulence, which is envisioned to arise due to both rotation and convection in solar-type stars. In this contribution, a turbulent flow driven by a nonhelical inhomogeneous forcing and its kinematic dynamo action are studied for a uniform magnetic field in the background of a linear shear flow. By using a quasilinear analysis and a nonperturbative method utilizing a time-dependent wave number, turbulence property and electromotive force are computed for arbitrary shear strength. Due to the large-scale shear flow, the turbulence is highly anisotropic, as a consequence, so is the electromotive force. The latter is found to exist even without rotation due to the combined effect of shear flow and inhomogeneous forcing, containing not only the {alpha} effect but also magnetic pumping (the {gamma} effect representing a transport of magnetic flux by turbulence). Specifically, without shear, only the magnetic pumping exists, aligned with the direction of inhomogeneity. For a weak but nonzero shear, the combined effects of shear and inhomogeneous forcing modify the structure of the magnetic pumping when the inhomogeneity is in the plane of the shear flow, the magnetic pumping becoming bidimensional in that plane. It also induces an {alpha} tensor which has nondiagonal components. When the inhomogeneity is perpendicular to the plane of the shear flow, the {alpha} effect has three nonzero diagonal components and one off-diagonal component. However, for a sufficiently strong shear, the {gamma} and {alpha} effects are suppressed due to shear stabilization which damps turbulence. A simplified dynamo model is then proposed where a large-scale dynamo arises due to the combined effect of shear flow and inhomogeneous forcing. In particular, the growth of a large-scale axisymmetric magnetic field is demonstrated in case of an inhomogeneity which is perpendicular to the plane of the shear flow. Interesting implications of these results for the structure of magnetic fields in star with slow rotation are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improvement of force factor of magnetostrictive vibration power generator for high efficiency

We develop high power magnetostrictive vibration power generator for battery-free wireless electronics. The generator is based on a cantilever of parallel beam structure consisting of coil-wound Galfenol and stainless plates with permanent magnet for bias. Oscillating force exerted on the tip bends the cantilever in vibration yields stress variation of Galfenol plate, which causes flux variation and generates voltage on coil due to the law of induction. This generator has advantages over conventional, such as piezoelectric or moving magnet types, in the point of high efficiency, highly robust, and low electrical impedance. Our concern is the improvement of energy conversion efficiency dependent on the dimension. Especially, force factor, the conversion ratio of the electromotive force (voltage) on the tip velocity in vibration, has an important role in energy conversion process. First, the theoretical value of the force factor is formulated and then the validity was verified by experiments, where we compare four types of prototype with parameters of the dimension using 7.0 × 1.5 × 50 mm beams of Galfenol with 1606-turn wound coil. In addition, the energy conversion efficiency of the prototypes depending on load resistance was measured. The most efficient prototype exhibits the maximum instantaneous power of 0.73 W and energy of 4.7 mJ at a free vibration of frequency of 202 Hz in the case of applied force is 25 N. Further, it was found that energy conversion efficiency depends not only on the force factor but also on the damping (mechanical loss) of the vibration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fundamental Electrochemical Properties of Liquid Metals in LiCl-KCl for Separation of Alkali/Alkaline-Earths (Cs, Sr, and Ba)

In electrorefiner, uranium is recovered from used nuclear fuel using an electrorefining process in which a metallic used nuclear fuel anode is oxidized into molten LiCl-KCl-UCl 3 electrolyte and pure U is preferentially reduced onto an inert cathode. While electrorefiner systems facilitate the recycling of substantial amounts of uranium from used nuclear fuel, they also contribute to the production of nuclear waste due to the build-up of fission products such as 90 Sr and 137 Cs in the molten salt electrolyte as they are electrochemically more active than U. The accumulation of alkali/alkaline-earth elements (Ba, Sr, Cs) in the electrolyte presents a problem as Sr and Cs isotopes have high heat densities and produce large amounts of highly ionizing radiation; these hazards combined with difficulty in removing the highly stable alkali/alkaline-earth elements from the electrolyte necessitates frequent replacement and disposal of the electrolyte, which then increases the overall volume of nuclear waste. This research project focuses on evaluating the viability of using liquid metal electrodes for electrochemical separation of alkali/alkaline-earths from molten salts utilizing the strong atomic interactions between candidate liquid metals and alkali/alkaline-earths. The strength of chemical interactions was quantified by determining the thermodynamic properties (e.g., activity) in liquid metals of Bi, Sb, and Pb. Thermodynamic properties, including activities, partial molar entropies, and partial molar enthalpies, were determined using electromotive force measurements for the Sr-Bi, Sr-Sb, Sr-Pb, Ba-Bi, and Ba-Sb binary systems in order to elucidate the strength of interactions between the alkaline-earth elements and each liquid metal, and to develop a comprehensive understanding of their behavior. Activities as low as a Sr = 10 -13 at x Sr = 0.04 at T = 888 K were measured as well as liquid state solubility as high as 40 mol% at 988 K in Sr-liquid metal systems; activities as low as aBa = 10 -15 at xBa = 0.05 at T = 888 K with liquid state solubility as high as 30 mol% at 988 K in Ba-liquid metal systems. Experimental data was used as input data towards computational efforts involving first-principles calculations as well as the CALPHAD (CALculation of PHAse Diagram) technique in the case of the Sr-Sb and Ba-Bi systems to develop improved phase diagrams and provide further basis for the use of computational models in elucidating strongly interacting binary systems. Attempts to remove Sr and Ba from molten salt electrolyte using an electrochemical cell with liquid metal cathodes were successful, with post-mortem elemental analysis of the electrodes confirming significant quantities of Sr (6.5 mol%) and Ba (12.8 mol%) deposited into Bi. Furthermore, deposition results correlated well with the deposition behavior predicted from the aforementioned electromotive force measurements, inviting the possibility of using liquid metal electrodes for selectively removing alkali/alkaline-earth elements from molten LiCl-KCl electrolyte to recycle the process salt in electrorefiner.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fluidic electrodynamics: Approach to electromagnetic propulsion

We report on a new methodological approach to electrodynamics based on a fluidic viewpoint. We develop a systematic approach establishing analogies between physical magnitudes and isomorphism (structure-preserving mappings) between systems of equations. This methodological approach allows us to give a general expression for the hydromotive force, thus re-obtaining the Navier-Stokes equation departing from the appropriate electromotive force. From this ground we offer a fluidic approach to different kinds of issues with interest in propulsion, e.g., the force exerted by a charged particle on a body carrying current; the magnetic force between two parallel currents; the Magnus's force. It is shown how the intermingle between the fluid vector fields and electromagnetic fields leads to new insights on their dynamics. The new concepts introduced in this work suggest possible applications to electromagnetic (EM) propulsion devices and the mastery of the principles of producing electric fields of required configuration in plasma medium.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spin-pump-induced spin transport in a thermally evaporated pentacene film

We report the spin-pump-induced spin transport properties of a pentacene film prepared by thermal evaporation. In a palladium(Pd)/pentacene/Ni{sub 80}Fe{sub 20} tri-layer sample, a pure spin-current is generated in the pentacene layer by the spin-pumping of Ni{sub 80}Fe{sub 20}, which is independent of the conductance mismatch problem in spin injection. The spin current is absorbed into the Pd layer, converted into a charge current with the inverse spin-Hall effect in Pd, and detected as an electromotive force. This is clear evidence for the pure spin current at room temperature in pentacene films prepared by thermal evaporation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

GENERIC MODEL FOR MAGNETIC EXPLOSIONS APPLIED TO SOLAR FLARES

An accepted model for magnetospheric substorms is proposed as the basis for a generic model for magnetic explosions and is applied to solar flares. The model involves widely separated energy-release and particle-acceleration regions, with energy transported Alfvenically between them. On a global scale, these regions are coupled by a large-scale current that is set up during the explosion by redirection of pre-existing current associated with the stored magnetic energy. The explosion-related current is driven by an electromotive force (EMF) due to the changing magnetic flux enclosed by this current. The current path and the EMF are identified for an idealized quadrupolar model for a flare.

79 ASTRONOMY AND ASTROPHYSICS↗

X-ray diffraction study, magnetic susceptibility, and electric properties of Cu{sub 3}Fe{sub 0.5}Se{sub 2} crystal

Single crystals of the Cu{sub 3}Fe{sub 0.5}Se{sub 2} composition have been grown. The orthorhombic lattice parameters are found to be a = 8.169 A, b = 8.238 A, c = 12.052 A, V = 811.15 A{sup 3}, D{sub x} = 6.23 g/cm{sup 3}, sp. gr. Pnma, Z = 8. The magnetic susceptibility is measured in the range 100 < T < 400 K at H = 2 T. It is established that a crystal transforms into the antiferromagnetic state below T{sub N} = 350 K. The temperature dependences of the electrical conduction ({sigma}), thermal electromotive force ({alpha}), and thermal conduction (k) are measured in the range 80 < T < 400 K; the n value was calculated to be 5 x 10{sup 19} cm{sup -1}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Generation of spin currents in the skyrmion phase of a helimagnetic insulator Cu{sub 2}OSeO{sub 3}

We report spin-current generation related to skyrmion dynamics resonantly excited by a microwave in a helimagnetic insulator Cu{sub 2}OSeO{sub 3}. A Pt layer was fabricated on Cu{sub 2}OSeO{sub 3} and voltage in the Pt layer was measured upon magnetic upon magnetic resonance of Cu{sub 2}OSeO{sub 3} to electrically detect injected spin currents via the inverse spin Hall effect (ISHE) in Pt. We found that ISHE-induced electromotive forces appear in the skyrmion phase of Cu{sub 2}OSeO{sub 3} as well as in the ferrimagnetic phase, which shows that magnetic skyrmions can contribute to the spin pumping effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

MAGNETIC EXPLOSIONS: ROLE OF THE INDUCTIVE ELECTRIC FIELD

Inclusion of the inductive electric field, E{sub ind}, due to the temporally changing B, in magnetic explosions is discussed, with emphasis on solar flares. Several roles played by E{sub ind} are identified: on a global scale, E{sub ind} produces the electromotive force that drives the explosion; the associated E{sub ind} Multiplication-Sign B drift is identified with the inflow of magnetic field lines into a reconnection region; the polarization current, associated with {partial_derivative}E{sub ind}/{partial_derivative}t, implies a J Multiplication-Sign B force that accelerates this inflow; and the component of E{sub ind} parallel to B accelerates the energetic electrons that cause hard X-ray emission and type III radio bursts. Some simple models that describe these effects are presented. A resolution of the long-standing 'number problem' in solar flares is suggested.

79 ASTRONOMY AND ASTROPHYSICS↗

Observation of spin-charge conversion in chemical-vapor-deposition-grown single-layer graphene

Conversion of pure spin current to charge current in single-layer graphene (SLG) is investigated by using spin pumping. Large-area SLG grown by chemical vapor deposition is used for the conversion. Efficient spin accumulation in SLG by spin pumping enables observing an electromotive force produced by the inverse spin Hall effect (ISHE) of SLG. The spin Hall angle of SLG is estimated to be 6.1 × 10{sup −7}. The observed ISHE in SLG is ascribed to its non-negligible spin-orbit interaction in SLG.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗