Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EIGENVECTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Colloquium: Eigenvector continuation and projection-based emulators

Eigenvector continuation is a computational method for parametric eigenvalue problems that uses subspace projection with a basis derived from eigenvector snapshots from different parameter sets. It is part of a broader class of subspace-projection techniques called reduced-basis methods. In this Colloquium, the development, theory, and applications of eigenvector continuation and projection-based emulators are presented. In conclusion, the basic concepts are introduced, the underlying theory and convergence properties are discussed, and recent applications for quantum systems and future prospects are presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Eigenvalues and eigenvectors for hybrid coordinate equations of motion for flexible spacecraft

The eigenvalues and eigenvectors of a system of linear time-invariant equations describing the attitude motion of flexible spacecraft in terms of hybrid coordinates are characterized in terms of literal expressions by using peculiar properties of the system parameter matrices. For the undamped case the eigenvalues are localized in terms of inertial matrices and modal parameters. A procedure for calculating the eigenvectors is proposed whereby the eigenproblem associated with the original system of dimension (2N + 6) is reduced to that of a symmetric and positive definite matrix of dimension N with the zero-damping assumption. The eigenvectors for systems of large dimension are obtained explicitly in terms of a 3x1 matrix whose elements are available from a system of three algebraic equations, which is provided.

Ohkami, Y.↗

Discrete model improvement by eigenvector updating

An eigenvector updating method is proposed to fit modal test data. The calculated eigenvectors are updated by coinciding some of them with the corresponding measured eigenvectors as a result of an orthogonal transformation. The advantage of the method is the applicability to large complex structures without necessity of recomputation of the eigendata.

Zak, M.↗

Eigenvalue and eigenvector sensitivity and approximate analysis for repeated eigenvalue problems

A set of computationally efficient equations for eigenvalue and eigenvector sensitivity analysis are derived, and a method for eigenvalue and eigenvector approximate analysis in the presence of repeated eigenvalues is presented. The method developed for approximate analysis involves a reparamaterization of the multivariable structural eigenvalue problem in terms of a single positive-valued parameter. The resulting equations yield first-order approximations of changes in both the eigenvalues and eigenvectors associated with the repeated eigenvalue problem. Examples are given to demonstrate the application of such equations for sensitivity and approximate analysis.

Hou, Gene J. W.↗

An efficient design sensitivity analysis of eigenvectors

Subspace iteration has been a major advance in solving large eigen problems when only a subset of eigen-pairs is required. The essence of this method is a transformation from displacement coordinates of an n-th order eigensystem to generalized coordinates of a smaller q-th order. The eigenvalue problem is then solved in the reduced space. The method was first developed by Clint and Jennings for real symmetric systems and was then called 'simultaneous iteration'. The success of the method prompted further research along this line and there have been many improved algorithms developed. This approach has been widely used by structural engineers for extracting the most useful natural frequencies and mode shapes of large-scale dynamic systems. This paper exploits into a new direction which is in the form of iterative process for simultaneously calculating eigenvector derivatives of many eigenvectors with respect to multi-variables. The method fully uses all the available information from preceding eigenvalue solution and, thus, effectively economizes computational efforts. It iterates through two equations derived from the first variation of the two fundamental equations used in subspace iteration method. There is no expensive large matrix decomposition required and the process converges to acceptable solution in a finite number of iterations. Therefore, the procedure increases its efficiency superiority over the others as the system size or the number of interested eigenvectors become larger and larger.

Ting, T.↗

Lateral-Directional Eigenvector Flying Qualities Guidelines for High Performance Aircraft

This report presents the development of lateral-directional flying qualities guidelines with application to eigenspace (eigenstructure) assignment methods. These guidelines will assist designers in choosing eigenvectors to achieve desired closed-loop flying qualities or performing trade-offs between flying qualities and other important design requirements, such as achieving realizable gain magnitudes or desired system robustness. This has been accomplished by developing relationships between the system's eigenvectors and the roll rate and sideslip transfer functions. Using these relationships, along with constraints imposed by system dynamics, key eigenvector elements are identified and guidelines for choosing values of these elements to yield desirable flying qualities have been developed. Two guidelines are developed - one for low roll-to-sideslip ratio and one for moderate-to-high roll-to-sideslip ratio. These flying qualities guidelines are based upon the Military Standard lateral-directional coupling criteria for high performance aircraft - the roll rate oscillation criteria and the sideslip excursion criteria. Example guidelines are generated for a moderate-to-large, an intermediate, and low value of roll-to-sideslip ratio.

Davidson, John B.↗

The Application of Principal Component Analysis Using Fixed Eigenvectors to the Infrared Thermographic Inspection of the Space Shuttle Thermal Protection System

The Nondestructive Evaluation Sciences Branch at NASA s Langley Research Center has been actively involved in the development of thermographic inspection techniques for more than 15 years. Since the Space Shuttle Columbia accident, NASA has focused on the improvement of advanced NDE techniques for the Reinforced Carbon-Carbon (RCC) panels that comprise the orbiter s wing leading edge. Various nondestructive inspection techniques have been used in the examination of the RCC, but thermography has emerged as an effective inspection alternative to more traditional methods. Thermography is a non-contact inspection method as compared to ultrasonic techniques which typically require the use of a coupling medium between the transducer and material. Like radiographic techniques, thermography can be used to inspect large areas, but has the advantage of minimal safety concerns and the ability for single-sided measurements. Principal Component Analysis (PCA) has been shown effective for reducing thermographic NDE data. A typical implementation of PCA is when the eigenvectors are generated from the data set being analyzed. Although it is a powerful tool for enhancing the visibility of defects in thermal data, PCA can be computationally intense and time consuming when applied to the large data sets typical in thermography. Additionally, PCA can experience problems when very large defects are present (defects that dominate the field-of-view), since the calculation of the eigenvectors is now governed by the presence of the defect, not the good material. To increase the processing speed and to minimize the negative effects of large defects, an alternative method of PCA is being pursued when a fixed set of eigenvectors is used to process the thermal data from the RCC materials. These eigen vectors can be generated either from an analytic model of the thermal response of the material under examination, or from a large cross section of experimental data. This paper will provide the details of the analytic model; an overview of the PCA process; as well as a quantitative signal-to-noise comparison of the results of performing both embodiments of PCA on thermographic data from various RCC specimens. Details of a system that has been developed to allow insitu inspection of a majority of shuttle RCC components will be presented along with the acceptance test results for this system. Additionally, the results of applying this technology to the Space Shuttle Discovery after its return from flight will be presented.

Cramer, K. Elliott↗

Fixed Eigenvector Analysis of Thermographic NDE Data

Principal Component Analysis (PCA) has been shown effective for reducing thermographic NDE data. This paper will discuss an alternative method of analysis that has been developed where a predetermined set of eigenvectors is used to process the thermal data from both reinforced carbon-carbon (RCC) and graphiteepoxy honeycomb materials. These eigenvectors can be generated either from an analytic model of the thermal response of the material system under examination, or from a large set of experimental data. This paper provides the details of the analytic model, an overview of the PCA process, as well as a quantitative signal-to-noise comparison of the results of performing both conventional PCA and fixed eigenvector analysis on thermographic data from two specimens, one Reinforced Carbon-Carbon with flat bottom holes and the second a sandwich construction with graphite-epoxy face sheets and aluminum honeycomb core.

Cramer, K. Elliott↗

Thermal Inspection of a Composite Fuselage Section Using a Fixed Eigenvector Principal Component Analysis Method

A composite fuselage aircraft forward section was inspected with flash thermography. The fuselage section is 24 feet long and approximately 8 feet in diameter. The structure is primarily configured with a composite sandwich structure of carbon fiber face sheets with a Nomex(Trademark) honeycomb core. The outer surface area was inspected. The thermal data consisted of 477 data sets totaling in size of over 227 Gigabytes. Principal component analysis (PCA) was used to process the data sets for substructure and defect detection. A fixed eigenvector approach using a global covariance matrix was used and compared to a varying eigenvector approach. The fixed eigenvector approach was demonstrated to be a practical analysis method for the detection and interpretation of various defects such as paint thickness variation, possible water intrusion damage, and delamination damage. In addition, inspection considerations are discussed including coordinate system layout, manipulation of the fuselage section, and the manual scanning technique used for full coverage.

Zalameda, Joseph N.↗

Analysis of structural correlations in a model binary 3D liquid through the eigenvalues and eigenvectors of the atomic stress tensors

It is possible to associate with every atom or molecule in a liquid its own atomic stress tensor. These atomic stress tensors can be used to describe liquids’ structures and to investigate the connection between structural and dynamic properties. In particular, atomic stresses allow to address atomic scale correlations relevant to the Green-Kubo expression for viscosity. Previously correlations between the atomic stresses of different atoms were studied using the Cartesian representation of the stress tensors or the representation based on spherical harmonics. In this paper we address structural correlations in a 3D model binary liquid using the eigenvalues and eigenvectors of the atomic stress tensors. This approach allows to interpret correlations relevant to the Green-Kubo expression for viscosity in a simple geometric way. On decrease of temperature the changes in the relevant stress correlation function between different atoms are significantly more pronounced than the changes in the pair density function. We demonstrate that this behaviour originates from the orientational correlations between the eigenvectors of the atomic stress tensors. We also found correlations between the eigenvalues of the same atomic stress tensor. For the studied system, with purely repulsive interactions between the particles, the eigenvalues of every atomic stress tensor are positive and they can be ordered: λ{sub 1} ≥ λ{sub 2} ≥ λ{sub 3} ≥ 0. We found that, for the particles of a given type, the probability distributions of the ratios (λ{sub 2}/λ{sub 1}) and (λ{sub 3}/λ{sub 2}) are essentially identical to each other in the liquids state. We also found that λ{sub 2} tends to be equal to the geometric average of λ{sub 1} and λ{sub 3}. In our view, correlations between the eigenvalues may represent “the Poisson ratio effect” at the atomic scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mutual spin-phonon driving effects and phonon eigenvector renormalization in nickel (II) oxide

The physics of mutual interaction of phonon quasiparticles with electronic spin degrees of freedom, leading to unusual transport phenomena of spin and heat, has been a subject of continuing interests for decades. Despite its pivotal role in transport processes, the effect of spin-phonon coupling on the phonon system, especially acoustic phonon properties, has so far been elusive. By means of inelastic neutron scattering and first-principles calculations, anomalous scattering spectral intensity from acoustic phonons was identified in the exemplary collinear antiferromagnetic nickel (II) oxide, unveiling strong spin-lattice correlations that renormalize the polarization of acoustic phonon. In particular, a clear magnetic scattering signature of the measured neutron scattering intensity from acoustic phonons is demonstrated by its momentum transfer and temperature dependences. The anomalous scattering intensity is successfully modeled with a modified magneto-vibrational scattering cross-section, suggesting the presence of spin precession driven by phonon. The renormalization of phonon eigenvector is indicated by the observed “geometry-forbidden” neutron scattering intensity from transverse acoustic phonon. Importantly, the eigenvector renormalization cannot be explained by magnetostriction but instead, it could result from the coupling between phonon and local magnetization of ions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An Eigenvector-Based Method of Radio Array Calibration and Its Application to the Tianlai Cylinder Pathfinder

We propose an eigenvector-based formalism for the calibration of radio interferometer arrays. In the presence of a strong dominant point source, the complex gains of the array can be obtained by taking the first eigenvector of the visibility matrix. We use the stable principle component analysis method to help separate outliers and noise from the calibrator signal to improve the performance of the method. This method can be applied with poorly known beam model of the antenna, is insensitive to outliers or imperfections in the data, and has low computational complexity. It thus is particularly suitable for the initial calibration of the array, which can serve as the initial point for more accurate calibrations. We demonstrate this method by applying it to the cylinder pathfinder of the Tianlai experiment, which aims to measure the dark energy equation of state using the baryon acoustic oscillation features in the large-scale structure by making intensity mapping observation of the redshifted 21 cm emission of the neutral hydrogen (H i). The complex gain of the array elements and the beam profile in the east–west direction (short axis of the cylinder) are successfully obtained by applying this method to the transit data of bright radio sources.

79 ASTRONOMY AND ASTROPHYSICS↗

Eigenvectors from Eigenvalues: a survey of a basic identity in linear algebra

If $A$ is an $n \times n$ Hermitian matrix with eigenvalues $\lambda_1(A),\dots,\lambda_n(A)$ and $i,j = 1,\dots,n$, then the $j^{\mathrm{th}}$ component $v_{i,j}$ of a unit eigenvector $v_i$ associated to the eigenvalue $\lambda_i(A)$ is related to the eigenvalues $\lambda_1(M_j),\dots,\lambda_{n-1}(M_j)$ of the minor $M_j$ of $A$ formed by removing the $j^{\mathrm{th}}$ row and column by the formula $$ |v_{i,j}|^2\prod_{k=1;k\neq i}^{n}\left(\lambda_i(A)-\lambda_k(A)\right)=\prod_{k=1}^{n-1}\left(\lambda_i(A)-\lambda_k(M_j)\right)\,.$$ We refer to this identity as the \emph{eigenvector-eigenvalue identity}. Despite the simple nature of this identity and the extremely mature state of development of linear algebra, this identity was not widely known until very recently. In this survey we describe the many times that this identity, or variants thereof, have been discovered and rediscovered in the literature (with the earliest precursor we know of appearing in 1934). We also provide a number of proofs and generalizations of the identity.

97 MATHEMATICS AND COMPUTING↗

Volume extrapolation via eigenvector continuation

Here, we develop an extension of eigenvector continuation (EC) that makes it possible to extrapolate simulations of quantum systems in finite periodic boxes across large ranges of box sizes. The formal justification for this approach, which we call finite-volume eigenvector continuation (FVEC), is provided by matching periodic functions at different box sizes. As concrete FVEC implementation we use a discrete variable representation based on plane-wave states and present several applications calculated within this framework.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Eigenvector centrality for geometric and topological characterization of porous media

Solving flow and transport through complex geometries such as porous media is computationally difficult. Such calculations usually involve the solution of a system of discretized differential equations, which could lead to extreme computational cost depending on the size of the domain and the accuracy of the model. Geometric simplifications like pore-networks, where the pores are represented by nodes and pore throats by edges connecting pores, have been proposed. These models, despite their ability to preserve the connectivity of the medium, have difficulties in capturing preferential paths (high velocity) and stagnation zones (low velocity) as they do not consider the specific relations between nodes. Nonetheless, network theory approaches, where a complex network is a graph, can help to simplify and better understand fluid dynamics and transport in porous media. Here we present a novel method to address these issues based on eigenvector centrality, which has been corrected to overcome the centralization problem, and modified to introduce a bias in the centrality distribution along a particular direction to address the flow and transport anisotropy in porous media. We compare the model predictions with millifluidic transport experiments, which shows that, albeit simple, this technique is computationally efficient and has potential for predicting preferential paths and stagnation zones for flow and transport in porous media. We propose to use eigenvector centrality probability distribution to compute entropy as an indicator of the ‘mixing capacity’ of the system.

58 GEOSCIENCES↗

Signature extraction of ocean pollutants by eigenvector transformation of remote spectra

Spectral signatures of suspended matter in the ocean are being extracted through characteristic vector analysis of remote ocean color data collected with MOCS (Multichannel Ocean Color Sensor). Spectral signatures appear to be obtainable through analyses of 'linear' clusters that appear on scatter diagrams associated with eigenvectors. Signatures associated with acid waste, sewage sludge, oil, and algae are presented. The application of vector analysis to two acid waste dumps overflown two years apart is examined in some detail. The relationships between eigenvectors and spectral signatures for these examples are analyzed. These cases demonstrate the value of characteristic vector analysis in remotely identifying pollutants in the ocean and in determining the consistency of their spectral signatures.

Grew, G. W.↗

Eigenvector determination by iterative optical methods

Three power algorithms are considered by which an iterative optical processor can be used to compute the eigenvalues and eigenvectors of a matrix. The algorithms are appropriate for three applications: (1) calculating the largest eigenvalue; (2) calculating the eigenvalues in order of decreasingly dominant eigenvalues; and (3) calculating the eigenvector whose eigenvalue is closest to a given value.

Vijaya Kumar, B. V. K.↗