Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Donor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Boron Doped diamond films as electron donors in photovoltaics: An X-ray absorption and hard X-ray photoemission study

Highly boron-doped diamond films are investigated for their potential as transparent electron donors in solar cells. Specifically, the valence band offset between a diamond film (as electron donor) and Cu(In,Ga)Se₂ (CIGS) as light absorber is determined by a combination of soft X-ray absorption spectroscopy and hard X-ray photoelectron spectroscopy, which is more depth-penetrating than standard soft X-ray photoelectron spectroscopy. In addition, a theoretical analysis of the valence band is performed, based on GW quasiparticle band calculations. The valence band offset is found to be small: VBO=VBM{sub CIGS} – VBM{sub diamond}=0.3 eV±0.1 eV at the CIGS/Diamond interface and 0.0 eV±0.1 eV from CIGS to bulk diamond. These results provide a promising starting point for optimizing the band offset by choosing absorber materials with a slightly lower valence band maximum.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of the Number and Substitution Pattern of Carbazole Donors on the Singlet and Triplet State Energies in a Series of Carbazole-Oxadiazole Derivatives Exhibiting Thermally Activated Delayed Fluorescence

Substitution of a varying number of 9H-carbazole donors onto 2-(pentafluorophenyl)-5-phenyl-1,3,4-oxadiazole yields a series of donor–acceptor compounds with similar electrochemical band gaps, but dissimilar optical properties. Each substitution of a carbazole onto the 2- and 4-positions results in a 150–200 meV stabilization of the first singlet excited state, evident in the fluorescent emission. Here, the first triplet excited state is less sensitive to these substitutions, leading to a reduced energy separation between the singlet and triplet states, ΔE ST , with increasing carbazole content. OLED devices made using the donor–acceptor compounds exhibiting the lowest ΔE ST were fabricated and exhibit sky blue emission with an external quantum efficiency of up to 24.4% at a luminance of 10 cd m –2 , and 9.2% at 1000 cd m –2 .

36 MATERIALS SCIENCE↗

Impact of Classical and Quantum Light on Donor–Acceptor–Donor Molecules

Investigations of entangled and classical two-photon absorption have been carried out for six donor (D)–acceptor (A)–donor (D) compounds containing the dithieno pyrrole (DTP) unit as donor and acceptors with systematically varied electronic properties. Comparing ETPA (quantum) and TPA (classical) results reveals that the ETPA cross section decreases with increasing TPA cross section for molecules with highly off-resonant excited states for single-photon excitation. Theory (TDDFT) results are in semiquantitative agreement with this anticorrelated behavior due to the dependence of the ETPA cross section but not TPA on the two-photon excited state lifetime. Furthermore, the largest cross section is found for a DTP derivative that has a single photon excitation energy closest to resonance with half the two-photon excitation energy. These results are important for the possible use of quantum light for low-intensity energy-conversion applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evolution of Chain Dynamics and Oxidation States with Increasing Chain Length for a Donor–Acceptor-Conjugated Oligomer Series

While it is known that the chain length strongly affects the properties of π-conjugated polymers, the effects of chain length on the molecular structure, chain conformation, and oxidation state properties in donor–acceptor-type conjugated structures remain unclear. This limits our understanding of how the polymer molecular weight impacts material properties. Here, a discrete and monodisperse oligomer series (n = 3, 5, 7, 9, 15, and 21) and polymers (nPB), composed of the donor 3,4-propylenedioxythiophene (ProDOT), the acceptor benzothiadiazole (BTD), and methylthio end-capping groups, are synthesized by C–H-activated cross-coupling. The molecular structure, molecular weight, and dispersity of each oligomer/polymer are thoroughly characterized by nuclear magnetic resonance spectroscopy, mass spectrometry, and gel permeation chromatography. This series reveals a rod-to-coil transition at n = 15 and coil formation at polymer length scales of ~28 units via solution small-angle neutron scattering characterization. The oxidation states are deciphered via cyclic voltammetry, differential pulse voltammetry, spectroelectrochemistry, and density functional theory calculations. Oligomers 3–9 undergo successive one-electron oxidation steps, while 15 and higher undergo multielectron oxidations per step in CH 2 Cl 2 –TBAPF6 at a Pt ultramicroelectrode. The electronic transition of each oxidation state (1+, 2+, 3+, etc.) is tracked by absorption spectroscopy, revealing a “bipolaron to di-polaron” transition at n = 7 at which shorter oligomers prefer bipolaron formation and longer oligomers prefer di-polaron formation in their dication states. Furthermore, oxidized 15 has a lower electronic transition energy compared to its polymer homologue, as shown by spectroelectrochemistry, revealing a synergy between the chain length and the oxidation state properties. This study proves that the convergence limit between small molecule and polymer behavior occurs at approximately 15 units and highlights the property transitions that occur as a function of chain length for a donor–acceptor class of conjugated organic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Donor and double-donor transitions of the carbon vacancy related EH{sub 6∕7} deep level in 4H-SiC

Using medium- and high-resolution multi-spectra fitting of deep level transient spectroscopy (DLTS), minority carrier transient spectroscopy (MCTS), optical O-DLTS and optical-electrical (OE)-MCTS measurements, we show that the EH{sub 6∕7} deep level in 4H-SiC is composed of two strongly overlapping, two electron emission processes with thermal activation energies of 1.49 eV and 1.58 eV for EH{sub 6} and 1.48 eV and 1.66 eV for EH{sub 7}. The electron emission peaks of EH{sub 7} completely overlap while the emission peaks of EH{sub 6} occur offset at slightly different temperatures in the spectra. OE-MCTS measurements of the hole capture cross section σ{sub p0}(T) in p-type samples reveal a trap-Auger process, whereby hole capture into the defect occupied by two electrons leads to a recombination event and the ejection of the second electron into the conduction band. Values of the hole and electron capture cross sections σ{sub n}(T) and σ{sub p}(T) differ strongly due to the donor like nature of the deep levels and while all σ{sub n}(T) have a negative temperature dependence, the σ{sub p}(T) appear to be temperature independent. Average values at the DLTS measurement temperature (∼600 K) are σ{sub n2+}(T) ≈ 1 × 10{sup −14} cm{sup 2}, σ{sub n+}(T) ≈ 1 × 10{sup −14} cm{sup 2}, and σ{sub p0}(T) ≈ 9 × 10{sup −18} cm{sup 2} for EH{sub 6} and σ{sub n2+}(T) ≈ 2 × 10{sup −14} cm{sup 2}, σ{sub n+}(T) ≈ 2 × 10{sup −14} cm{sup 2}, σ{sub p0}(T) ≈ 1 × 10{sup −20} cm{sup 2} for EH{sub 7}. Since EH{sub 7} has already been identified as a donor transition of the carbon vacancy, we propose that the EH{sub 6∕7} center in total represents the overlapping first and second donor transitions of the carbon vacancy defects on both inequivalent lattice sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

HJ-aggregates of donor–acceptor–donor oligomers and polymers

A vibronic exciton model is developed to account for the spectral signatures of HJ-aggregates of oligomers and polymers containing donor–acceptor–donor (DAD) repeat units. In (DAD) N π-stacks, J-aggregate-promoting intrachain interactions compete with H-aggregate promoting interchain interactions. The latter includes Coulombic coupling, which arises from “side-by-side” fragment transition dipole moments as well as intermolecular charge transfer (ICT), which is enhanced in geometries with substantial overlap between donors on one chain and acceptors on a neighboring chain. J-behavior is dominant in single (DAD)N chains with enhanced intrachain order as evidenced by an increased red-shift in the low-energy absorption band along with a heightened A 1 /A 2 peak ratio, where A 1 and A 2 are the oscillator strengths of the first two vibronic peaks in the progression sourced by the symmetric quinoidal–aromatic vibration. By contrast, the positive H-promoting interchain Coulomb interactions operative in aggregates cause the vibronic ratio to attenuate, similar to what has been established in H-aggregates of homopolymers such as P3HT. An attenuated A 1 /A 2 ratio can also be caused by H-promoting ICT which occurs when the electron and hole transfer integrals are out-of-phase. In this case, the A 1 peak is red-shifted, in contrast to conventional Kasha H-aggregates. With slight modifications, the ratio formula derived previously for P3HT aggregates is shown to apply to (DAD) N aggregates as well, allowing one to determine the effective free-exciton interchain coupling from the A 1 /A 2 ratio. Applications are made to polymers based on 2T-DPP-2T and 2T-BT-2T repeat units, where the importance of the admixture of the excited acceptor state in the lowest energy band is emphasized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complete recovery of actinides from UREX-like raffinates using a combination of hard and soft donor ligands. II. soft donor structure variation

The feasibility of simultaneous separation of uranium, neptunium, plutonium, americium, and curium from a simulated dissolved used fuel simulant adjusted to 1.0 M nitric acid is investigated using a mixture of the soft donor bis(bis-3,5-trifluoromethyl)phenyl) dithiophosphinic acid (“0”) and the hard donor synergist trioctylphosphine oxide (TOPO) dissolved in toluene. The results reported in this work are compared to our recent demonstration of a complete actinide recovery from a simulated dissolved fuel solution using a synergistic combination of bis(o-trifluoromethylphenyl)dithiophosphinic acid (“1”) and TOPO dissolved in either toluene or trifluoromethylphenyl sulfone. While the extraction efficiency of americium was enhanced for the liquid-liquid system containing “0”, enabling to accomplish a trivalent An/Ln separation at 1.0 M HNO3, the extraction of neptunium was drastically diminished, relative to “1”. The partitioning behavior of curium was also negatively impacted, introducing an effective opportunity for americium/curium separation. Radiometric and spectrophotometric studies demonstrate that the complete actinide recovery using the solvent based upon “0” and TOPO is not feasible. Additionally, the importance of radiolytic degradation processes is discussed through the comparisons of extraction properties of liquid-liquid systems based on both soft donor reagents.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Acceleration and Stabilization of Electron Transfer Products with Improved Quantum Yields upon Cation Binding to a Fused Bis-Zinc Porphyrin-Quinone Donor–Acceptor Conjugate

The role of metal ions in promoting electron transfer processes in biological coenzymes is of great significance not only to understand their mechanistic details but also due to their direct utilization in a number of chemical and biochemical processes. Here, we demonstrate an increased rate of forward electron transfer with improved reaction quantum yield, and an enhanced lifetime of electron transfer products upon cation binding to the acceptor entity in a donor-acceptor conjugate. Selective binding of cations such as Mg 2+ or Sc 3+ to the electron acceptor, quinone, in a fused, bis-zinc porphyrin-quinone donor-acceptor conjugate leads to facile reduction of the quinone making the electron transfer process thermodynamically highly feasible. Furthermore, the binding of metal ions to the electron transfer product, quinone anion, decelerates the reverse electron transfer process due to ion-pairing interactions, resulting in improving both the lifetime and quantum yields of the electron transfer products. Furthermore, systematic studies including spectral, electrochemical, computational, spectroelectrochemical, and transient absorption techniques, coupled with data analysis by Global Target Analysis (GloTarAn), are performed to demonstrate these novel findings that are relevant to further our understanding of electron transfer processes occurring in biological coenzymes and pertinent energy harvesting schemes.

Charge transfer↗

A Donor–Acceptor [2]Catenane for Visible Light Photocatalysis

Colored charge-transfer complexes can be formed by the association between electron-rich donor and electron-deficient acceptor molecules, bringing about the narrowing of HOMO–LUMO energy gaps so that they become capable of harnessing visible light. In an effort to facilitate the use of these widespread, but nonetheless weak, interactions for visible light photocatalysis, it is important to render the interactions strong and robust. Furthermore, we employ a well-known donor–acceptor [2]catenane—formed by the mechanical interlocking of cyclobis(paraquat-p-phenylene) and 1,5-dinaphtho[38]crown-10—in which the charge-transfer interactions between two 4,4'-bipyridinium and two 1,5-dioxynaphthalene units are enhanced by mechanical bonding, leading to increased absorption of visible light, even at low concentrations in solution. As a result, since this [2]catenane can generate persistent bipyridinium radical cations under continuous visible-light irradiation without the need for additional photosensitizers, it can display good catalytic activity in both photo-reductions and -oxidations, as demonstrated by hydrogen production—in the presence of platinum nanoparticles—and aerobic oxidation of organic sulfides, such as l-methionine, respectively. This research, which highlights the usefulness of nanoconfinement present in mechanically interlocked molecules for the reinforcement of weak interactions, can not only expand the potential of charge-transfer interactions in solar energy conversion and synthetic photocatalysis but also open up new possibilities for the development of active artificial molecular shuttles, switches, and machines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Surface and Structural Variations in Donor–Acceptor–Donor Sensitizers on Photoelectrocatalytic Water Splitting

Conjugated organic chromophores composed of linked donor (D) and acceptor (A) moieties have attracted considerable attention for photoelectrochemical applications. In this work, we compare the optoelectronic properties and photoelectrochemical performance of two D–A–D structural isomers with thiophene-X-carboxylic acid (X denotes 3 and 2 positions) derivatives and 2,1,3-benzothiadiazole as the D and A moieties, respectively. 5,5′-(Benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-3-carboxylic acid), BTD1, and 5,5′-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-2-carboxylic acid), BTD2, were employed in the study to understand how structural isomers affect surface attachments within chromophore–catalyst assemblies and their influence on charge-transfer dynamics. Crystal structures revealed that varying the position of the −COOH anchoring group causes the molecules to either contort out of a plane (BTD1) or adopt a near-perfect planar conformation (BTD2). BTD1 and BTD2 were co-loaded with either a water oxidation catalyst, [Ru(2,6-bis(1-methylbenzimidazol-2-yl)pyridine)-(4,4′-((HO) 2 OPCH 2 )2-2,2′-bipyridine)(OH 2 )] 2 , RuCt 2+ , or proton reduction catalyst [Ni(P 2 Ph N 2 C 6 H 4 CH 2 PO 3 H 2 ) 2 ] 2+ , NiCt 2+ , on oxide electrodes to facilitate photodriven water splitting reactions. Emission quenching measurements indicate that both BTD1 and BTD2 inject electrons into n-type SnO 2 |TiO 2 electrodes and holes into p-type NiO semiconductors from their respective excited states at high efficiencies >60%. Photocurrent densities of chromophore–catalyst assemblies obtained using linear sweep voltammetry (LSV) show that BTD2-sensitized photoanodes generate significantly more photocurrent than BTD1-sensitized electrodes; however, both exhibit similar performances at the photocathode. Photoelectrocatyltic measurements demonstrate that both BTD1 and BTD2 performed similarly, generating Faradaic efficiencies of 39 and 38% at the anode or 61 and 79% at the cathode. Transient absorption measurements suggest that the differences between the LSV and photoelectrocatalytic measurements result from the differences in quantum yields of the photogenerated redox equivalents, which is also a reflection of the varying metal oxide surface conformation. Our findings suggest that BTD2 should be investigated further in photocathodic studies since it has the structural advantage of being incorporated into diverse types of chromophore–catalyst assemblies.

Chromophores↗