Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Domain reduction method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Nonlinear Interface Reduction for Time-Domain Analysis of Hurty/Craig-Bampton Superelements with Frictional Contact

Virtual prototyping in engineering design relies today on modern numerical models of contacting structures with accurate resolution of interface mechanics, which strongly affect the system-level stiffness and energy dissipation due to frictional losses. High-fidelity modeling within the localized interfaces is required to resolve local quantities of interest that may drive design decisions. The high-resolution finite element meshes necessary to resolve inter-component stresses tend to be computationally expensive, particularly when the analyst is interested in response time histories. The Hurty/Craig-Bampton (HCB) transformation is a widely used method in structural dynamics for reducing the interior portion of a finite element model while having the ability to retain all nonlinear contact degrees of freedom (DOF) in physical coordinates. These models may still require many DOF to adequately resolve the kinematics of the interface, leading to inadequate reduction and computational savings. This study proposes a novel interface reduction method to overcome these challenges by means of system-level characteristic constraint (SCC) modes and properly orthogonal interface modal derivatives (POIMDs) for transient dynamic analyses. Both SCC modes and POIMDs are computed using the reduced HCB mass and stiffness matrices, which can be directly computed from many commercial finite element analysis software. Comparison of time history responses to an impulse-type load in a mechanical beam assembly indicate that the interface-reduced model correlates well with the HCB truth model. Localized features like slip and contact area are well-represented in the time domain when the beam assembly is loaded with a broadband excitation. The proposed method also yields reduced-order models with greater critical timestep lengths for explicit integration schemes.

42 ENGINEERING↗
DOE OSTI2023

Topological structure of complex predictions

Abstract Current complex prediction models are the result of fitting deep neural networks, graph convolutional networks or transducers to a set of training data. A key challenge with these models is that they are highly parameterized, which makes describing and interpreting the prediction strategies difficult. We use topological data analysis to transform these complex prediction models into a simplified topological view of the prediction landscape. The result is a map of the predictions that enables inspection of the model results with more specificity than dimensionality-reduction methods such as tSNE and UMAP. The methods scale up to large datasets across different domains. We present a case study of a transformer-based model previously designed to predict expression levels of a piece of DNA in thousands of genomic tracks. When the model is used to study mutations in the BRCA1 gene, our topological analysis shows that it is sensitive to the location of a mutation and the exon structure of BRCA1 in ways that cannot be found with tools based on dimensionality reduction. Moreover, the topological framework offers multiple ways to inspect results, including an error estimate that is more accurate than model uncertainty. Further studies show how these ideas produce useful results in graph-based learning and image classification.

Computer Science↗
NASA NTRS2011

Data Mining of Network Logs

The statement of purpose is to analyze network monitoring logs to support the computer incident response team. Specifically, gain a clear understanding of the Uniform Resource Locator (URL) and its structure, and provide a way to breakdown a URL based on protocol, host name domain name, path, and other attributes. Finally, provide a method to perform data reduction by identifying the different types of advertisements shown on a webpage for incident data analysis. The procedures used for analysis and data reduction will be a computer program which would analyze the URL and identify and advertisement links from the actual content links.

Collazo, Carlimar↗
NASA NTRS1995

A relational metric, its application to domain analysis, and an example analysis and model of a remote sensing domain

An objective and quantitative method has been developed for deriving models of complex and specialized spheres of activity (domains) from domain-generated verbal data. The method was developed for analysis of interview transcripts, incident reports, and other text documents whose original source is people who are knowledgeable about, and participate in, the domain in question. To test the method, it is applied here to a report describing a remote sensing project within the scope of the Earth Observing System (EOS). The method has the potential to improve the designs of domain-related computer systems and software by quickly providing developers with explicit and objective models of the domain in a form which is useful for design. Results of the analysis include a network model of the domain, and an object-oriented relational analysis report which describes the nodes and relationships in the network model. Other products include a database of relationships in the domain, and an interactive concordance. The analysis method utilizes a newly developed relational metric, a proximity-weighted frequency of co-occurrence. The metric is applied to relations between the most frequently occurring terms (words or multiword entities) in the domain text, and the terms found within the contexts of these terms. Contextual scope is selectable. Because of the discriminating power of the metric, data reduction from the association matrix to the network is simple. In addition to their value for design. the models produced by the method are also useful for understanding the domains themselves. They can, for example, be interpreted as models of presence in the domain.

Mcgreevy, Michael W.↗
DOE OSTI2024

Process damping identification using Bayesian learning and time domain simulation

Process damping can provide improved machining productivity by increasing the stability limit at low spindle speeds. However, existing methods for identifying process damping models experimentally require specialized setups and/or multiple cutting tests. While the phenomenon is well known, the modeling challenges limit pre-process parameter selection that leverages the potential increases in material removal rates. This paper proposes a physics-informed Bayesian method that can identify the cutting force and process damping models from a limited set of test cuts without requiring direct measurements of cutting force or vibration. The method uses time domain simulation to incorporate process damping and provide a basis for test selection. Here, new strategies for efficient sampling and dimensionality reduction are applied to lower computation time and minimize the effect of model error. The proposed method is demonstrated and the identified cutting and damping force coefficients are compared to values obtained using machining tests and least-squares fitting.

42 ENGINEERING↗
DOE OSTI2025

Boundary Corrections for Kernel Approximation to Differential Operators

The kernel-based approach to operator approximation for partial differential equations has been shown to be unconditionally stable for linear PDEs and numerically exhibit unconditional stability for non-linear PDEs. These methods have the same computational cost as an explicit finite difference scheme but can exhibit order reduction at boundaries. In previous work on periodic domains, order reduction was addressed, yielding high-order accuracy. The issue addressed in this work is the elimination of order reduction of the kernel-based approach for a more general set of boundary conditions. Further, we consider the case of both first and second order operators. To demonstrate the theory, we provide not only the mathematical proofs but also experimental results by applying various boundary conditions to different types of equations. The results agree with the theory, demonstrating a systematic path to high order for kernel-based methods on bounded domains.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1985

A method for high order linear system reduction and nonlinear system simplification

Least-squares-type algorithms for reducing the order of linear systems in the frequency domain and simplifying nonlinear systems in time domain are developed and demonstrated. The possible model structures are represented as nodes in a tree, and costs along the branches are assigned using the repeated-Gram-Schmidt orthogonalization procedure of Desrochers and Saridis (1980), permitting identification of the optimal n-term model by searching the tree to depth n, with no need for parameter identification. The efficiency and flexibility of the algorithms is shown in applications to the eighth-order linear system studied by Hsia (1972), a three-state eight-nonlinear-term aircraft-dynamics problem, and the related linear-controller problem (Garrard and Jordan, 1977).

Desrochers, A. A.↗
NASA NTRS1988

Modal model reduction or model reduction of large space structures in frequency domain

Large space structures are characterized by a large number of modes, grouped frequencies, and small inherent damping. Model reduction techniques in time domain may not be effective due to small damping. The model truncation method is generally used. This method can not solve the problem of grouped frequencies, and will lose all the information about the higher order modes. A new method developed in this paper, which tries to minimize the error of interested transfer functions, makes use of all the information of the original system, and achieves improvement not only from a smaller error of transfer functions but also from better frequency distribution.

Mifang, Ruan↗
NASA NTRSDate not supplied

Time Domain Boundary Element Method Prediction of Noise Shielding by an NACA 0012 Airfoil

As aircraft noise constraints become more stringent and the number/mixture of aircraft configurations grows, the need for improved aircraft noise reduction technologies becomes more evident. To achieve more aggressive noise reduction goals, it becomes more important to not only understand individual aircraft noise sources, but their interaction with nearby aircraft structures as well. For example, the mutual interaction of multiple propulsors and the airframe structure can lead to increased system noise levels. However, these interactions may also offer opportunities for noise reduction. Understanding these interactions and exploring possible approaches to mitigate or exploit their acoustic impact is important for overcoming key noise barriers. This paper presents further validation of a time domain approach for the prediction of the aforementioned interactions between incident noise sources and nearby aircraft structures. Specifically, predictions using a time domain\ boundary element method1, 2 are compared with measured data from a fundamental shielding experiment.3, 4 The test facility and associated measurements are described in Section II. The computational model is then presented in Section III. Comparisons of the predictions with measured data are provided in Section IV. Finally, concluding remarks regarding some of the more significant results and further areas of interest are presented in Section V.

Acoustic scattering↗
DOE OSTI2020

Associations between cumulative environmental quality and ten selected birth defects in Texas

Abstract Background Causes of most birth defects are largely unknown. Genetics, maternal factors (e.g., age, smoking) and environmental exposures have all been linked to some birth defects, including neural tube, oral cleft, limb reduction, and gastroschisis; however, the contribution of cumulative exposures across several environmental domains in association with these defects is not well understood. Methods The Environmental Quality Index (EQI) and its domains (air, water, land, sociodemographic, built) were used to estimate county‐level cumulative environmental exposures from 2006–2010 and matched to birth defects identified from Texas Birth Defects Registry and live birth records from births in years 2007–2010 ( N = 1,610,709). Poisson regression models estimated prevalence ratios (PR) and 95% confidence intervals (CI) for associations between 10 birth defects and the EQI. Results We observed some positive associations between worst environmental quality and neural tube, anencephaly, spina bifida, oral cleft, cleft palate, cleft lip with and without cleft palate, and gastroschisis [PR range: 1.12–1.55], but near null associations with limb reduction defects. Among domain specific results, we observed the strongest positive associations with the sociodemographic domain across birth defects but varied positive associations among the air and water domains, and negative or null associations with the land and built domains. Overall, few exposure‐response patterns were evident. Conclusions Our results highlight the complexities of cumulative, simultaneous environmental exposures in the prevalence rates of 10 selected birth defects. We were able to explore the impact of overall and domain specific environmental quality on birth defects and identify potential domain specific drivers of these associations.

Krajewski, Alison K.↗
NASA NTRS1981

An approximate solution to improve computational efficiency of impedance-type payload load prediction

The computational efficiency of the impedance type loads prediction method was studied. Three goals were addressed: devise a method to make the impedance method operate more efficiently in the computer; assess the accuracy and convenience of the method for determining the effect of design changes; and investigate the use of the method to identify design changes for reduction of payload loads. The method is suitable for calculation of dynamic response in either the frequency or time domain. It is concluded that: the choice of an orthogonal coordinate system will allow the impedance method to operate more efficiently in the computer; the approximate mode impedance technique is adequate for determining the effect of design changes, and is applicable for both statically determinate and statically indeterminate payload attachments; and beneficial design changes to reduce payload loads can be identified by the combined application of impedance techniques and energy distribution review techniques.

White, C. W.↗
NASA NTRS1992

Size-reduction techniques for the determination of efficient aeroservoelastic models

Size-reduction techniques for determining efficient time-domain state-space aeroservoelastic models are presented. Various rational function approximation methods of the unsteady aerodynamic force coefficients are brought to a common motion, emphasizing their differences. Among these, the classic Roger's method is the easier to apply but its resulting number of aerodynamic states is typically equal to or larger than the number of structural states. On the other hand, the minimum-state (MS) method, which typically reduces the number of aerodynamic states by 70 percent or more, requires the solution of an iterative nonlinear least-square solution. The MS computational efforts are reduced significantly when three approximation constraints are applied.

Karpel, Mordechay↗
DOE OSTI2021

Space-Time Reduced-Order Modeling for Uncertainty Quantification

This work focuses on the space-time reduced-order modeling (ROM) method for solving large-scale uncertainty quantification (UQ) problems with multiple random coefficients. In contrast with the traditional space ROM approach, which performs dimension reduction in the spatial dimension, the space-time ROM approach performs dimension reduction on both the spatial and temporal domains, and thus enables accurate approximate solutions at a low cost. We incorporate the space-time ROM strategy with various classical stochastic UQ propagation methods such as stochastic Galerkin and Monte Carlo. Numerical results demonstrate that our methodology has significant computational advantages compared to state-of-the-art ROM approaches. By testing the approximation errors, we show that there is no obvious loss of simulation accuracy for space-time ROM given its high computational efficiency.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Subsurface Trend Analysis domains for the northern Gulf of Mexico

Geologic domains for the northern Gulf of Mexico derived using the Subsurface Trend Analysis (STA) method. The domains were postulated using geologic province, lithologic, and structural information and validated using statistical methods. Publication detailing the STA method: Rose, K., Bauer, J.R., and Mark-Moser, M. (2020) Subsurface trend analysis, a multi-variate geospatial approach for subsurface evaluation and uncertainty reduction, Interpretation, vol. 8, issue 1 https://library.seg.org/doi/abs/10.1190/int-2019-0019.1 Detailed discussion of domain formation and analysis: Mark-Moser, M., Miller, R., Bauer, J., Rose, K., and C. Disenhof. 2018, Analysis of Subsurface Reservoir Properties Using a Novel Geospatial Approach, Offshore Gulf of Mexico. NETL-TRS-2018 https://edx.netl.doe.gov/dataset/detailed-analysis-of-geospatial-trends-of-hydrocarbon-accumulations-offshore-gulf-of-mexico

geology↗
NASA NTRS2018

Simulation of Sound Absorption by Scattering Bodies Treated with Acoustic Liners Using a Time-Domain Boundary Element Method

Reducing aircraft noise is a major objective in the field of computational aeroacoustics. When designing next generation quiet aircraft, it is important to be able to accurately and efficiently predict the acoustic scattering by an aircraft body from a given noise source. Acoustic liners are an effective tool for aircraft noise reduction, and are characterized by a complex valued frequency-dependent impedance, Z(w). Converted into the time-domain using Fourier transforms, an impedance boundary condition can be used to simulate the acoustic wave scattering of geometric bodies treated with acoustic liners. This work uses an admittance boundary condition where the admittance, Y(w), is defined to be the inverse of impedance, i.e., Y(w) = 1/Z(w). An admittance boundary condition will be derived and coupled with a time domain boundary integral equation. The solution will be obtained iteratively using spatial and temporal basis functions and will allow for acoustic scattering problems to be modeled with geometries consisting of both unlined and soft surfaces. Stability will be demonstrated through eigenvalue analysis.

Pizzo, Michelle E.↗
DOE OSTI2025

Parallel-in-Time Solution of Scalar Nonlinear Conservation Laws

Here, we consider the parallel-in-time solution of scalar nonlinear conservation laws in one spatial dimension. The equations are discretized in space with a conservative finite-volume method using weighted essentially nonoscillatory (WENO) reconstructions, and in time with high-order explicit Runge–Kutta methods. The solution of the global, discretized space-time problem is sought via a nonlinear iteration that uses a novel linearization strategy in cases of nondifferentiable equations. Under certain choices of discretization and algorithmic parameters, the nonlinear iteration coincides with Newton’s method, although, more generally, it is a preconditioned residual correction scheme. At each nonlinear iteration, the linearized problem takes the form of a certain discretization of a linear conservation law over the space-time domain in question. An approximate parallel-in-time solution of the linearized problem is computed with a single multigrid reduction-in-time (MGRIT) iteration; however, any other effective parallel-in-time method could be used in its place. The MGRIT iteration employs a novel coarse-grid operator that is a modified conservative semi-Lagrangian discretization and generalizes those we have developed previously for nonconservative scalar linear hyperbolic problems. Numerical tests are performed for the inviscid Burgers and Buckley–Leverett equations. For many test problems, the solver converges in just a handful of iterations with a convergence rate independent of mesh resolution, including problems with (interacting) shocks and rarefactions.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2011

Binary-Signal Recovery

Binary communication through long cables, opto-isolators, isolating transformers, or repeaters can become distorted in characteristic ways. The usual solution is to slow the communication rate, change to a different method, or improve the communication media. It would help if the characteristic distortions could be accommodated at the receiving end to ease the communication problem. The distortions come from loss of the high-frequency content, which adds slopes to the transitions from ones to zeroes and zeroes to ones. This weakens the definition of the ones and zeroes in the time domain. The other major distortion is the reduction of low frequency, which causes the voltage that defines the ones or zeroes to drift out of recognizable range. This development describes a method for recovering a binary data stream from a signal that has been subjected to a loss of both higher-frequency content and low-frequency content that is essential to define the difference between ones and zeroes. The method makes use of the frequency structure of the waveform created by the data stream, and then enhances the characteristics related to the data to reconstruct the binary switching pattern. A major issue is simplicity. The approach taken here is to take the first derivative of the signal and then feed it to a hysteresis switch. This is equivalent in practice to using a non-resonant band pass filter feeding a Schmitt trigger. Obviously, the derivative signal needs to be offset to halfway between the thresholds of the hysteresis switch, and amplified so that the derivatives reliably exceed the thresholds. A transition from a zero to a one is the most substantial, fastest plus movement of voltage, and therefore will create the largest plus first derivative pulse. Since the quiet state of the derivative is sitting between the hysteresis thresholds, the plus pulse exceeds the plus threshold, switching the hysteresis switch plus, which re-establishes the data zero to one transition, except now at the logic levels of the receiving circuit. Similarly, a transition from a one to a zero will be the most substantial and fastest minus movement of voltage and therefore will create the largest minus first derivative pulse. The minus pulse exceeds the minus threshold, switching the hysteresis switch minus, which re-establishes the data one to zero transition. This innovation has a large increase in tolerance for the degradation of the binary pattern of ones and zeroes, and can reject the introduction of noise in the form of low frequencies that can cause the voltage pattern to drift up or down, and also higher frequencies that are beyond the recognizable content in the binary transitions.

Griebeler, Elmer L.↗
NASA NTRS1991

Suppressing interfering scattered signals in swept-frequency radar measurements by using frequency domain Wiener filtering

A novel approach to the reduction of scattered, interfering signals that corrupt measurements of the signal backscattered from radar targets of interest is being developed. It is being explored with sphere measurements in an indoor microwave radar range. This method is based on the concept of Wiener filtering (which minimizes the difference between the signal plus noise and the desired signal in the time domain). In contrast to the traditional Wiener filter, in which the time domain error between two sequences are minimized, the approach reported uses the frequency domain phasor amplitudes of a swept frequency signal. It minimizes the difference (least-mean-square-magnitude) between the signal-plus-noise and the signal complex phasors, across the entire spectrum.

Weissman, David E.↗