Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Depth of Discharge”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

High-Performance InZn Alloy Anodes toward Practical Aqueous Zinc Batteries

Aqueous Zn batteries have high safety, low-cost and potential of delivering comparable energy density to alkali-ion batteries. However, its practical application is largely hampered by the limited cycle life associated with Zn anodes under conditions of high depth of discharge and high plating current densities. In this work, we report on electrodeposited indium-zinc alloy anodes that have well-dispersed zinc-domains surrounding indium domains that form a porous structure after dealloying which greatly improves tolerance to Zn dendrite formation. The InZn anodes exhibit low polarization of ~5 to 25 mV and demonstrate 700 cycles at a current density of ~10 mA cm -2 with a capacity of 5 mAh cm-2 capacity (45% depth-of-discharge). Full cells with an InZn anode, dibenzo[b,i]thianthrene-5,7,12,14-tetraone (DTT) cathode, in 2M ZnSO 4 deliver a capacity of ~ 110 mAh g -1 and good stability over 40 cycles. Finally, the work reveals a rational design of Zn-based anodes towards practical battery applications and opens the curtain for future development of aqueous Zn batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

Understanding Discharge‐Driven Growth of Cathode Impedance in Ni‐Rich NMC Cathodes

Degradation of LiNi x Mn y Co 1-x-y O 2 (NMC)-based lithium-ion batteries depends strongly on cut-off voltage ranges. In addition to the high upper cut-off voltage, a high depth of discharge (i.e., lower cut-off voltage) significantly worsens cathode impedance growth and capacity fade during long-term cycling. However, there is currently no consensus on the mechanism behind the negative role of a deep discharge. Here, this phenomenon was investigated in graphite||NMC cells with single-crystal cathodes (LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NMC622) or LiNi 0.76 Co 0.14 Mn 0.10 O 2 (NMC76)) using targeted aging protocols (constant high-voltage holds vs. charge–discharge cycling), while monitoring transition-metal (TM) dissolution, cathode-electrolyte interface (CEI) impedance, and NMC surface composition. We demonstrate a correlation between discharge-driven CEI impedance growth and increased TM dissolution. Furthermore, this degradation pathway is more pronounced in lower-Ni NMC622 than in higher-Ni (NMC76) under comparable delithiation states at charge, with both compositions undergoing the H2→H3 phase transition. X-ray photoelectron spectroscopy (XPS) reveals NMC composition-dependent evolution of surface lattice oxygen and restructured surface layer composition between charged and discharged states. These findings add mechanistic depth to the role of discharge as an active driver of interfacial degradation and provide new insights into its composition dependence.

25 ENERGY STORAGE↗
DOE OSTI2024

Calibration of V-Notch and Compound Weirs for Subsurface Drainage Water Level Control Structures

Highlights Accurate discharge estimation is important when evaluating edge-of-field conservation practices. V-notch weir equations were developed for three sizes of subsurface drainage water level control structures. Compound weir equations were developed for subsurface drainage water level control structures. The compound weir equation accurately estimates discharge for flows within and overtopping the V-notch. Abstract.Numerous edge-of-field conservation practices use subsurface drainage water level control structures to monitor water levels and estimate discharge. In a control structure, procedures for calculating discharge when flow depth (head) exceeds the V-notch depth and overflows in the rectangular portion of the compound weir (CW) are ambiguous. In this study, we developed calibration equations for V-notch weirs in Agri Drain inline water level control structures of different sizes for flows within the V-notch and overtopping flow events. The discharge equation for overtopping events (Q CW , L s -1 ) was determined as: Q CW = a 1 (h b1 -h 1 b1 )+a 2 (W e -W v )h 1 b2 , where h and h 1 are heads above vertex/bottom and top of V-notch (cm), respectively, W is the effective crest width of rectangular weir (cm), W v is the top width of V-notch (cm), a 1 and b 1 are parameters for V-notch weir obtained by calibration, and a 2 and b 2 are calibration parameters for rectangular weir obtained from literature. Results were compared with a weir equation available in the literature (Q V+R ), which combines a V-notch equation with a head equal to V-depth and a rectangular weir equation for flow above V-depth. Discharge at overflow was estimated with high accuracy with Q CW, whereas Q V+R underestimated discharge (e.g., PBIAS of 0.67% vs. 17.82% for a 15.2 cm structure). An example using Q V+R resulted in a 14% lower annual estimation of nitrate-N load diverted to a saturated buffer than Q CW due to underestimation of drainage discharge during overflow events. Results suggest that the developed equation (Q CW ) accurately estimates discharge and will thus improve the estimated N load compared to Q V+R . Keywords: Compound weir, Flow monitoring, Subsurface drainage, V-notch weir, Water level control structure, Weir calibration.

Agriculture↗
DOE OSTI2019

Quantitative guidance for efficient vertical flow measurements at the sediment–water interface using temperature–depth profiles

Upward discharge to surface water bodies can be quantified using analytical models based on temperature–depth (T-z) profiles. The use of sediment T-z profiles is attractive as discharge estimates can be obtained using point-in-time data that are collected inexpensively and rapidly. Previous studies have identified that T-z methods can only be applied at times of the year when there is significant difference between the streambed–water interface and deeper sediment temperatures (e.g., winter and summer). However, surface water temperatures also vary diurnally, and the influence of these variations on discharge estimates from T-z methods is poorly understood. For this study, synthetic T-z profiles were generated numerically using measured streambed interface temperature data to assess the influence of diurnal temperature variations on discharge estimation and provide insight into the suitable application of T-z methods. Results show that the time of day of data collection can have a substantial influence on vertical flux estimates using T-z methods. For low groundwater discharge fluxes (e.g., 0.1 m d -1 ), daily transience in streambed temperatures led to relatively large errors in estimated flow magnitude and direction. For higher discharge fluxes (1.5 m d -1 ), the influence of transient streambed temperatures on discharge estimates was strongly reduced. Discharge estimates from point-in-time T-z profiles were most accurate when the uppermost point in the T-z profile was near the bed interface daily mean (two time periods daily). Where temperature time series data are available, daily averaged T-z profiles can produce accurate discharge estimates across a wide range of discharge rates. Seasonality in shallow groundwater temperature generally had a negligible influence on vertical flow estimates. Finally, these findings can be used to plan field campaigns and provide guidance on the optimal application of T-z methods to quantify vertical groundwater discharge to surface water bodies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Understanding the heat generation mechanisms and the interplay between joule heat and entropy effects as a function of state of charge in lithium-ion batteries

The thermal performance of lithium-ion battery cells is critical for ensuring their safe and reliable operation across various applications. In this study, we employed an isothermal calorimetry method to investigate the heat generation of commercial 18650 lithium-ion battery fresh cells during charge and discharge at different current rates, ranging from 0.05C to 0.5C, and across various temperatures: 20 °C, 30 °C, 40 °C, and 50 °C. Our findings revealed a direct correlation between heat generation and current rates, indicating that higher current rates lead to increased heat generation within the cells. Conversely, we observed that heat generation remained relatively stable as the temperature rose, suggesting that temperature changes within this range may not significantly impact the heat generation of fresh cells during typical operations. Furthermore, our study explored irreversible heat generation, which depends on the applied current and overpotential, using the galvanostatic intermittent titration technique at 0.05C–0.5C and 30 °C. Additionally, electrochemical impedance spectroscopy was performed on the same cells during charge and discharge at 20 °C, 30 °C, and 40 °C to analyze cell impedance. Finally, our results indicated a consistent dependence of impedance on the state of charge and depth of discharge, with a significant increase in impedance observed at the end of the discharge process.

25 ENERGY STORAGE↗
DOE OSTI2023

Active Reconditioning of Retired Lithium-ion Battery Packs from Electric Vehicles for Second Life Applications

Utilizing the remaining capacity in retired lithium-ion (Li-ion) batteries from electric vehicles (EVs) for second-life applications has shown economic and environmental benefits. However, achieving homogeneity among the capacities of cells before their second life is critical to exploit the benefits. This article proposes a new active reconditioning approach with the potential to make short-term reconditioning of batteries before second life feasible. A control objective map determines each cell's state-of-charge (SOC) operating window based on its capacity relative to other cells. The SOC reference translates into distinct differential currents through the cells, wherein the higher-capacity cells undergo more frequent and deep charge and discharge cycles than their lower-capacity counterparts. The proposed solution achieves capacity homogeneity within the battery pack with low reconditioning time and minimal fade in the overall pack capacity. The feasibility of the reconditioning approach under varying load and environmental conditions is assessed through simulations, encompassing factors such as the number of cycles per day, depth-of-discharge, battery pack temperature, and cell resting time at different SOCs. Furthermore, the simulation model employs a battery pack with sixteen series-connected 75 Ah Kokam lithium nickel manganese cobalt oxide (NMC) cells with a 3.6% initial capacity imbalance. A reconditioning time of 1.3 months is achieved with a final capacity imbalance of 0.1% and an overall capacity fade of 0.005%, thereby confirming the viability of the reconditioning process. Moreover, experimental validation using eight retired battery cells from a Nissan Leaf demonstrates a substantial decrease in the capacity imbalance of cells from 9.4% to 2.15% within 78 days, effectively affirming the efficacy of the proposed reconditioning scheme.

25 ENERGY STORAGE↗
DOE OSTI2026

Cathode-Confined Polysulfide Retention-Release Reprograms Li 2 S Deposition in High-Loading Li–S Batteries

High-loading lithium-sulfur (Li-S) cells operated with lean electrolyte are limited by polysulfide crossover to Li metal and by transport-limited liquid-solid conversion that forms passivating Li 2 S films. Here, we show that a cathode-facing separator coating of carboxylated multiwalled carbon nanotubes acts as a cathode-confined polysulfide reservoir with intermediate binding. Early in discharge it captures newly generated polysulfides at the separator interface, suppressing shuttle reactions. As polysulfides are consumed, the reservoir buffers concentration gradients and feeds reactants back to the cathode, shifting Li 2 S deposition from burst-like film growth to progressive, three-dimensional, porous formation. Synchrotron XRD and S K-edge XANES, together with Scharifker–Hills nucleation analysis and depth-of-discharge EIS/DRT, substantiate this coupled transport–reaction control. With 4.3 mg S cm -2 and E/S = 5, cells reach 4.2 mAh cm -2 and retain 90% capacity over 100 cycles at 20 °C.

25 ENERGY STORAGE↗
DOE OSTI2020

An Atomic View of Cation Diffusion Pathways from Single‐Crystal Topochemical Transformations

Abstract The diffusion pathways of Li‐ions as they traverse cathode structures in the course of insertion reactions underpin many questions fundamental to the functionality of Li‐ion batteries. Much current knowledge derives from computational models or the imaging of lithiation behavior at larger length scales; however, it remains difficult to experimentally image Li‐ion diffusion at the atomistic level. Here, by using topochemical Li‐ion insertion and extraction to induce single‐crystal‐to‐single‐crystal transformations in a tunnel‐structured V 2 O 5 polymorph, coupled with operando powder X‐ray diffraction, we leverage single‐crystal X‐ray diffraction to identify the sequence of lattice interstitial sites preferred by Li‐ions to high depths of discharge, and use electron density maps to create a snapshot of ion diffusion in a metastable phase. Our methods enable the atomistic imaging of Li‐ions in this cathode material in kinetic states and provide an experimentally validated angstrom‐level 3D picture of atomic pathways thus far only conjectured through DFT calculations.

Handy, Joseph V.↗
DOE OSTI2023

Designing High‐Donicity Anions for Rechargeable Potassium Superoxide/Peroxide Batteries

Abstract A battery cathode based on the superoxide/peroxide redox not only inherits the advantage of oxygen (O 2 ) batteries in high capacities and low costs but also overcomes the disadvantages in O 2 storage, electrolyte evaporation, and anode deactivation due to O 2 crossover. Herein, we report an enhanced potassium superoxide (KO 2 )/peroxide (K 2 O 2 ) conversion by adopting a high‐donicity anion additive in the ether‐based electrolyte. Such an anion was synthesized via a “Solvent‐in‐Anion” strategy and validated to enhance the electron donicity of the electrolyte. The use of high‐donicity anion could lead to enhanced KO 2 utilization (≈90.2 %) by retarding electrode passivation and allow the full charging back of K 2 O 2 through the solution‐mediated pathway without electrocatalysts. No apparent cell degradation is observed during the first 120 cycles by controlling the reversible depth‐of‐discharge capacity at 292 mAh g −1 within an O 2 ‐free region. The K−KO 2 cell delivers a high energy efficiency (>84.4 %) and a lifespan of over 1440 hours.

Qin, Lei↗
DOE OSTI2022

Ultrafast Metal Electrodeposition Revealed by In Situ Optical Imaging and Theoretical Modeling towards Fast–Charging Zn Battery Chemistry

Metallic Zn is a preferred anode material for rechargeable aqueous batteries towards a smart grid and renewable energy storage. Importantly, understanding how the metal nucleates and grows at the aqueous Zn anode is a critical and challenging step to achieve full reversibility of Zn battery chemistry, especially under fast-charging conditions. Here, by combining in situ optical imaging and theoretical modeling, we uncover the critical parameters governing the electrodeposition stability of the metallic Zn electrode, that is, the competition among crystallographic thermodynamics, kinetics, and Zn 2+ -ion diffusion. Moreover, steady-state Zn metal plating/ stripping with Coulombic efficiency above 99 % is achieved at 10-100 mA cm -2 in a reasonably high concentration (3 M) ZnSO 4 electrolyte. Significantly, a long-term cycling-stable Zn metal electrode is realized with a depth of discharge of 66.7% under 50 mA cm -2 in both Zn || Zn symmetrical cells and MnO 2 || Zn full cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Designing High‐Donicity Anions for Rechargeable Potassium Superoxide/Peroxide Batteries

Abstract A battery cathode based on the superoxide/peroxide redox not only inherits the advantage of oxygen (O 2 ) batteries in high capacities and low costs but also overcomes the disadvantages in O 2 storage, electrolyte evaporation, and anode deactivation due to O 2 crossover. Herein, we report an enhanced potassium superoxide (KO 2 )/peroxide (K 2 O 2 ) conversion by adopting a high‐donicity anion additive in the ether‐based electrolyte. Such an anion was synthesized via a “Solvent‐in‐Anion” strategy and validated to enhance the electron donicity of the electrolyte. The use of high‐donicity anion could lead to enhanced KO 2 utilization (≈90.2 %) by retarding electrode passivation and allow the full charging back of K 2 O 2 through the solution‐mediated pathway without electrocatalysts. No apparent cell degradation is observed during the first 120 cycles by controlling the reversible depth‐of‐discharge capacity at 292 mAh g −1 within an O 2 ‐free region. The K−KO 2 cell delivers a high energy efficiency (>84.4 %) and a lifespan of over 1440 hours.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Deciphering the Evolution of Current Distribution in Hybrid Silver Vanadium Oxide / Carbon Monofluoride Cathodes within Lithium Primary Batteries

For batteries to function effectively all active material must be accessible requiring both electron and ion transport to each particle. A common approach to generating the needed conductive network is the addition of carbon to create a composite electrode. An alternative approach is the electrochemically induced formation of conductive reaction products where the electrochemically generated materials are in intimate contact with the active material contributing to effective connection of each active particle. Furthermore, this study probes silver vanadium oxide (Ag 2 V 4 O 11 , SVO), carbon monofluoride (CF x ), and hybrid SVO/CF x electrodes in lithium batteries. Ex situ XRD identifies Ag 0 as a reduction product from SVO and LiF from CF x that can be followed as a function of depth-of-discharge (DOD). Spatially-resolved operando energy dispersive x-ray diffraction reveals that the presence of SVO alleviates reaction heterogeneity in the electrodes which are electron transfer limited in the absence of sufficient Ag 0 . Synchrotron X-ray tomography on discharged cathodes reveals the distribution of silver particles where the particles are more closely spaced near the current collector indicating multiple nucleation sites for their formation. Finally, operando isothermal microcalorimetry is used to determine the heat dissipation of the parent and hybrid battery types. Using material enthalpy potentials, we determine the current distribution between the two active materials for the discharging hybrid cathode adding further insight to the diffraction analysis. Taken together, these results provide a comprehensive understanding of hybrid SVO/CF x cathodes and give guidance on optimal compositions that balance power and energy density considerations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Analysis of degradation in residential battery energy storage systems for rate-based use-cases

This article examines the impact of residential battery energy storage (BES) systems' operational modes on the life (i.e. usable energy capacity) of the battery under several climatic conditions and battery chemistries. The sharp increase in residential BES installations has been a result of decreasing costs of batteries, increase in rate structures motivated applications such as solar self-consumption and time-of-use energy management, and customers purchasing these systems for backup power. While these different modes of operations provide a combination of increased bill savings, reliability of supply, and energy sustainability to the customer, their operational characteristics vary significantly between use-cases. Functional life of BES systems is known to be strongly dependent on their operating conditions. In this article, we analyze the operation of residential BES systems under different rate-based use-cases, for different battery chemistries and cell designs, and under different environmental conditions. This is conducted by simulating the control of BES operations using rate-based cycling algorithms and analyzing the prognosis of multiple battery lifetime models that consider complex nonlinear dependencies of operational stress factors such as state-of-charge, depth-of-discharge, and temperature on degradation. Significant variations in battery life are observed owing to the differences in characteristics of the uses-cases coupled with environmental conditions and battery chemistries. Such differences lead to the conclusion that choice of residential BES technologies and chemistries should account for their intended use-cases.

25 ENERGY STORAGE↗
DOE OSTI2021

Design and processing for high performance Li ion battery electrodes with double-layer structure

A two-layer LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathode has been designed and fabricated containing a “power layer” and “energy layer”, with corresponding porosity and particle size prescribed to each layer to achieve best utilization of electrode material (maximum integrated depth of discharge across the electrode thickness) at high applied current. The cathode showed a 17% improvement in capacity when tested in symmetric cells. When applying the design to a full cell, where both positive and negative electrodes contain power and energy layers, a 74% increase in discharge capacity at 2C was achieved compared to the cell with conventional electrodes. Furthermore, this demonstrates an avenue to increase energy and power density of lithium–ion batteries and enable fast charging capability.

25 ENERGY STORAGE↗
DOE OSTI2023

Degradation and Modeling of Large-Format Commercial Lithium-Ion Cells as a Function of Chemistry, Design, and Aging Conditions

Demand for large-format (>10 Ah) lithium-ion batteries has increased substantially in recent years, due to the growth of both electric vehicle and stationary energy storage markets. The economics of these applications is sensitive to the lifetime of the batteries, and end-of-life can either be due to energy or power limitations. Despite this, there is little information from cell manufacturers on the sensitivity of cell degradation to environmental conditions or battery use. This work reports accelerated aging test data from four commercial large-format lithium-ion batteries from three manufacturers, with varying design (thickness, casings, ...), chemistry (lithium-iron-phosphate (LFP) or lithium-nickel-manganese-cobalt-oxide positive electrodes (NMC), with graphite (Gr) negative electrodes), and capacity (50 to 250 Amp hours). The tested LFP|Gr cell is found to be relatively insensitive to cycling conditions like temperature or voltage window, while NMC|Gr cells have varying sensitivity. Degradation trends are further investigated by training predictive models: simple polynomial trend lines, a semi-empirical reduced-order model, and an empirical reduced-order model identified using machine-learning based on symbolic regression. Calendar and cycle life are simulated over a variety of conditions to directly compare the various batteries. Cell size and thickness are found to substantially impact sensitivity to temperature during cycle aging, while electrode chemistry impacts depth-of-discharge sensitivity. Real-world battery lifetime is evaluated by simulating residential energy storage and commercial frequency containment reserve systems in several U.S. climate regions. Predicted lifetime across cell types varies from 7 years to 20+ years, though all cells are predicted to have at least 10 year life in certain conditions.

battery lifetime↗