Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DOLOMITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Influence of microstructure on replacement and porosity generation during experimental dolomitization of limestones

Replacement reactions commonly alter the multiscale pore structures of rocks during fluid-rock interactions. Analysis of these processes in various model fluid-rock systems during controlled laboratory experiments provides insights into the origins of microstructures found in natural materials. This study focused on understanding the effects of initial starting material permeability and resultant differences in transport pathways on porosity and mineralogical changes during limestone dolomitization.A series of replacement experiments (32–317 days in duration) have been conducted in which 1.59 cm (5/8 in.) diameter cores of two different limestones were reacted with saturated MgCl2 solutions at 200 °C. The Texas Cream (Austin Chalk) is a high-porosity, high-permeability limestone, whereas both the porosity and permeability of the Carthage Marble (Burlington Limestone) are relatively low. Altered limestones were imaged using scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), Time-of-Flight Secondary Ion Mass Spectrometry (ToF–SIMS) and electron microprobe analysis (EMPA). A representative grain boundary of the low-porosity limestone was targeted for a focused ion beam (FIB) lift-out and characterized using transmission electron microscopy (TEM). These results were coupled with analyses of radial changes in the porosity distribution of the core derived from X-ray and neutron small- and ultra-small angle scattering ((U)SANS/(U)SAXS).The high-porosity/permeability limestone showed a four times faster bulk replacement rate than the lower-porosity/permeability material, and a different mechanism of porosity development. For the low-porosity limestone, a two-stage replacement occurred, with the reacted region of the core consisting of an inner rim in which the limestone was replaced by two calcite-dolomite solid solutions, and an outer rim in which the dolomite was replaced by magnesite. Elongated pores formed along grain boundaries at the initial limestone/dolomite reaction interface, and additional nanometer-scale porosity was formed at the secondary magnesite replacement rim. Grain boundaries were identified as preferential pathways for transport leading to dolomitization and a grain boundary diffusion rate was calculated based on microstructural characterization. In contrast, replacement in the high-porosity limestone was accompanied by porosity generation through replacement of individual grains by dolomite throughout the sample and, in longer runs, magnesite in outer parts of the core. These observations emphasize that both the mechanisms of the replacement reaction and the microstructure and chemistry of the replaced product are contingent on the initial structure of the starting material.

36 MATERIALS SCIENCE↗

Reduction Behavior of Dolomite-Fluxed Magnetite: Coke Composite Pellets at 1573 K (1300 °C)

High-temperature behavior of magnetite—coke composite pellet fluxed with dolomite was investigated by customized thermogravimetric analyzer (TGA) at 1573 K (1300 °C). The overall reaction was influenced by C/O ratio and dolomite content. The reduction was accelerated by increased amount of dolomite, while the samples with higher C/O ratio showed the improved reduction degree. X-ray diffraction (XRD) pattern of reduced pellet showed the phase changes of the iron oxides. Noticeable iron peaks were observed when the sample reached the final stage of reduction. CO and CO{sub 2} gases released from the reaction were measured by Infrared (IR) gas analyzer. Relation between enhanced reducibility of pellets and larger CO gas evolution from the Boudouard reaction was confirmed from the analysis. Compressive strengths were studied for the practical assessment of reduced pellets. Samples with low-reduction degree showed better physical property. Excessive amount of dolomite also deteriorated the integrity of pellets.

36 MATERIALS SCIENCE↗

Understanding the hydration of dolomite in cementitious systems with reactive aluminosilicates such as calcined clay

This study investigates the hydration of dolomite, CaMg(CO{sub 3}){sub 2}, with calcined clay in presence of calcium hydroxide and ordinary Portland cement. The hydration products as well as the microstructure at various ages were characterized using X-ray diffraction (XRD), thermogravimetric analysis (TGA), and mercury intrusion porosimetry (MIP). Isothermal calorimetry was used to understand the reaction kinetics. The systems with dolomite were compared against control systems with limestone and quartz. It was seen that, the formation of carbonate – AFm phases takes place in the dolomite systems similar to limestone systems. No formation of brucite (Mg(OH){sub 2}) was observed till 90 days of hydration, with Mg{sup 2+} ions most likely being incorporated into hydrotalcite phase (Mg{sub 4}Al{sub 2}(OH){sub 14}). The synergetic effect observed in the Portland cement – calcined clay – dolomite system was found to result in a refined pore structure at early ages and improvement in the mechanical properties such as compressive strength.

36 MATERIALS SCIENCE↗

Cyclic carbonation calcination studies of limestone and dolomite for CO{sub 2} separation from combustion flue gases - article no. 011801

Naturally occurring limestone and dolomite samples, originating from different geographical locations, were tested as potential sorbents for carbonation/calcination based CO{sub 2} capture from combustion flue gases. Samples have been studied in a thermogravimetric analyzer under simulated flue gas conditions at three calcination temperatures, viz., 750{sup o}C, 875{sup o}C, and 930{sup o}C for four carbonation calcination reaction (CCR) cycles. The dolomite sample exhibited the highest rate of carbonation than the tested limestones. At the third cycle, its CO{sub 2} capture capacity per kilogram of the sample was nearly equal to that of Gotland, the highest reacting limestone tested. At the fourth cycle it surpassed Gotland, despite the fact that the CaCO{sub 3} content of the Sibbo dolomite was only 2/3 of that of the Gotland. Decay coefficients were calculated by a curve fitting exercise and its value is lowest for the Sibbo dolomite. That means, most probably its capture capacity per kilogram of the sample would remain higher well beyond the fourth cycle. There was a strong correlation between the calcination temperature, the specific surface area of the calcined samples, and the degree of carbonation. It was observed that the higher the calcination temperature, the lower the sorbent reactivity. For a given limestone/dolomite sample, sorbents CO{sub 2} capture capacity depended on the number of CCR cycles and the calcination temperature. According to the equilibrium thermodynamics, the CO{sub 2} partial pressure in the calciner should be lowered to lower the calcination temperature. This can be achieved by additional steam supply into the calciner. Steam could then be condensed in an external condenser to single out the CO{sub 2} stream from the exit gas mixture of the calciner. A calciner design based on this concept is illustrated.

01 COAL, LIGNITE, AND PEAT↗

Distribution of uranium and thorium in dolomitic gravel fill and shale saprolite

The objectives of this study were to examine (1) the distribution of U and Th in dolomitic gravel fill and shale saprolite, and (2) the removal of uranium from acidic groundwater by dolomitic gravel through precipitation with amorphous basaluminite at the U.S. DOE Oak Ridge Integrated Field Research Challenge (ORIFRC) field site west of the Oak Ridge Y-12 National Security Complex in East Tennessee. Media reactivity and sustainability are a technical concern with the deployment of any subsurface reactive media. Because the gravel was placed in the subsurface and exposed to contaminated groundwater for over 20 years, it provided a unique opportunity to study the solid and water phase geochemical conditions within the media after this length of exposure. This study illustrates that dolomite gravel can remove U from acidic contaminated groundwater with high levels of Al 3+ , Ca 2+ , NO 3- , and SO 4 2- over the long term. As the groundwater flows through high pH carbonate gravel, U containing amorphous basaluminite precipitates as the pH increases. This is due to an increase in groundwater pH from 3.2 to ~6.5 as it comes in contact with the gravel. Therefore, carbonate gravel could be considered as a possible treatment medium for removal and sequestration ofUand otherpHsensitive metals from acidic contaminated groundwater. Thorium concentrations are also high in the carbonate gravel. Thorium generally shows an inverse relationship with U from the surface down into the deeper saprolite. Barite precipitated in the shallow saprolite directly below the dolomitic gravel from barium present in the acidic contaminated groundwater.

54 ENVIRONMENTAL SCIENCES↗

Radiation-Induced Changes in Single Crystal Calcite and Dolomite: Mineral Analogues of Light Water Reactor, Nuclear Power Plant Concrete Aggregates

Two analogues of aggregates (calcite and dolomite) found in nuclear power plant (NPP) concrete have been neutron irradiated to fluences up to 2 × 10 20 n/cm 2 at 52 °C and 4 × 10 19 n/cm 2 at 95 °C (E > 0.1 MeV). X-ray diffraction studies showed that these aging conditions affected crystallography of both calcite and dolomite, with both showing a growth in their unit cells compared to that of the unirradiated samples. Only dolomite samples showed a continuous increase of its lattice parameters with the increase in irradiation. In calcites, the lattice growth with irradiation dissipated after a fluence of 5 × 10 18 n/cm 2 . Radiation-induced disordering of the crystal structure was observed in both materials, while a healing effect of irradiation temperature was mainly observed in calcites. Dislocation densities calculated by using XRD data also supported these observations. Insights made into the unit cells of both minerals by using Fourier synthesis showed that the Mg sites are more prone to the neutron irradiation than the Ca sites, resulting in larger radiation effects and higher disruption in the crystal structure of dolomite than that of calcite. Furthermore, other than the polycrystalline characteristics observed by using TEM, these minerals did not show complete amorphization or significant structural decomposition at the studied irradiation fluences.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Secondary Ion Mass Spectrometry Bias on Isotope Ratios in Dolomite-Ankerite, Part I: δ 18 O Matrix Effects

Here, we document the development of a suite of carbonate mineral reference materials for calibrating SIMS determinations of δ 18 O in samples with compositions along the dolomite–ankerite solid solution series [CaMg(CO 3 ) 2 –CaFe(CO 3 ) 2 ]. Under routine operating conditions for the analysis of carbonates for δ 18 O with an IMS 1280 instrument (at WiscSIMS, University of Wisconsin, Madison), the magnitude of instrumental bias along the dolomite–ankerite series decreased exponentially by ~ 10‰ with increasing Fe-content in the dolomite structure, but appeared insensitive to minor Mn substitution (< 2.6 mol% Mn/(Ca+Mg+Fe+Mn)). The compositional dependence of bias (i.e., the sample matrix effect) was calibrated using the Hill equation, which relates bias to the Fe# of dolomite–ankerite (i.e., molar Fe/(Mg+Fe)) for thirteen reference materials (Fe# = 0.004–0.789); for calibrations employing either 10 or 3 μm diameter spot size measurements, this yielded residual values ≤ 0.3–0.4‰ relative to CRM NBS 19 for most reference materials in the suite. Analytical precision was ± 0.3‰ (2s) for 10-μm spots and ± 0.7‰ (2s) for 3-μm spots, based on the spot-to-spot repeatability of a drift monitor material that ‘bracketed’ each set of ten sample spot analyses. Analytical uncertainty for individual sample analyses was approximated by a combination of precision and calibration residual values (propagated in quadrature), suggesting an uncertainty of ± 0.5‰ (2s) for 10-μm spots and ± 1‰ (2s) for 3-μm spots.

58 GEOSCIENCES↗

Equation of state and structural evolution of manganese dolomite (kutnohorite) under high pressures

Abstract Understanding the structural evolution of carbonate minerals with increasing pressure is essential to decoding the role of Earth’s mantle in the global carbon cycle and long-term climate change. Here, we carried out synchrotron single-crystal X-ray diffraction measurements on a natural sample of manganese dolomite [kutnohorite, Ca1.11Mn0.89(CO3)2] in a diamond-anvil cell up to 51.2 GPa at room temperature with neon as the pressure-transmitting medium. The manganese dolomite sample remains stable in the rhombohedral structure from 1 bar to ~13.3 GPa. The equation of state of Ca1.11Mn0.89(CO3)2 was determined: V0 = 334.06 ± 0.29 Å3, K0 = 99.9 ± 4.7 GPa, and K0′ = 4.3 ± 0.9; when K0′ is fixed at 4.0, V0 = 334.04 ± 0.24 Å3, and K0 = 101.4 ± 1.5 GPa. Upon further compression at room temperature, the split and disappearance of diffraction spots were observed. That is, the rhombohedral structure of manganese dolomite becomes highly distorted to lose its long-range order at 13.3–51.2 GPa at room temperature. Moreover, our single-crystal X-ray diffraction results reveal the mechanisms of the reported lattice and internal Raman mode splits of the same manganese dolomite sample approximately at 13 and 24 GPa, respectively. These results suggest manganese-bearing carbonates may play a distinct role in the deep carbon cycle.

Geochemistry & Geophysics↗

Mineralogical Studies of Experimentally Shocked Dolomite: Implications for the Outgassing of Carbonates

Common rock-forming rhombohedral carbonates - calcite and dolomite - constitute a considerable fraction of terrestrial sediments that may be shocked during hypervelocity impacts, such as during the Cretaceous-Tertiary (K/T) event or at the Haughton structure. The relatively modest temperatures needed to decompose carbonates and to release their CO2 are easily attained during such impacts. However, detailed and quantitative understanding of the CO2 release of carbonates as a function of shock stress is still the subject of controversy, as are a number of other reactions and phase transitions that were suggested for carbonates. The first devolatilization studies of carbonates in the early 1980s suggested that incipient devolatilization of calcite and/or dolomite commences at modest pressures, in the range < 10-18 GPa (amounting to 0.03-0.3% CO2 loss), with massive decarbonation (30-40% CO2 loss) occurring at shock pressure of 20 GPa and above. However, most later studies revealed that both calcite and dolomite are unexpectedly stable under shock conditions and no significant outgassing has been observed at pressures as high as 40 GPa for calcite and 60 GPa for dolomite. Despite these uncertainties, the calculations of O'Keefe and Ahrens (and others) serve to illustrate that the K/T bolide liberated sufficient CO2 that a substantial temperature increase of the global atmosphere is possible due to CO2-triggered greenhouse effects. The quantitative understanding of the devolatilization of carbonates as a function of shock stress is obviously critical to refine such calculations. Additional information is contained in the original extended abstract.

Skala, R.↗

Deposition of uranium precipitaties in dolomitic gravel fill

Uranium-containing precipitates have been observed in a dolomitic gravel fill near the Department of Energy (DOE) S-3 Ponds former waste disposal site as a result of exposure to acidic (pH 3.4) groundwater contaminated with U (33 mg L{sup -1}), Al{sup 3+} (900 mg L{sup -1}), and NO{sub 3}{sup -} (14000 mg L{sup -1}). The U containing precipitates fluoresce a bright green under ultraviolet (UV) short-wave light which identify U-rich coatings on the gravel. Scanning electron microscopy (SEM) microprobe analysis show U concentration ranges from 1.6-19.8% (average of 7%) within the coatings with higher concentrations at the interface of the dolomite fragments. X-ray absorption near edge structure spectroscopy (XANES) indicate that the U is hexavalent and extended X-ray absorption fine structure spectroscopy (EXAFS) shows that the uranyl is coordinated by carbonate. The exact nature of the uranyl carbonates are difficult to determine, but some are best described by a split K{sup +}-like shell similar to grimselite [K{sub 4}Na(UO{sub 2})(CO{sub 3}){sub 3} {center_dot} H{sub 2}O] and other regions are better described by a single Ca{sup 2+}-like shell similar to liebigite [Ca{sub 2}(UO{sub 2})(CO{sub 3}){sub 3} {center_dot} 11(H{sub 2}O)] or andersonite [Na{sub 2}CaUO{sub 2}(CO{sub 3}){sub 3} {center_dot} 6H{sub 2}O]. The U precipitates are found in the form of white to light yellow cracked-formations as coatings on the dolomite gravel and as detached individual precipitates, and are associated with amorphous basalumnite [Al{sub 4}(SO{sub 4})(OH){sub 10} {center_dot} 4H{sub 2}O].

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Determining Infrared Optical Constants for Dolomite using Single Angle Reflectance and Spectroscopic Ellipsometry

The optical constants, namely the real (n) and imaginary (k) parts of the complex refractive index, are of particular interest to generate the infrared (IR) spectra of liquid and solid materials in different morphologies. To obtain n/k, however, most materials are typically not found in the monolithic forms necessary to easily measure n/k, and thus require the use of other methods such as pressing powders to form planar, specularly-reflective pellets. In this work dolomite crystals are measured using fixed-angle IR reflectance spectroscopy in both 1) a monolithic form with the crystal fixed in epoxy and polished, but data are also recorded from 2) pressed-pellet forms of powders of the same mineral using the same spectroscopic protocols. First results for the two methods are compared. It was found that the measured reflectance can vary by as much as a factor of two between the dolomite crystals and the pressed powder forms. For the two-sample preparation approaches the preliminary spectra are compared and the implications and limitations of each method for determining the optical constants of given materials are discussed. Comparison to literature data suggest that polarization effects likely account for the differing amplitude results for reflectance (and hence the k -vectors): Dolomite is known to be biaxial with significantly differing ordinary and extraordinary rays; the pressed pellet method measures an ensemble of microcrystals in randomly oriented positions, whereas the single crystal maintains just one orientation relative to the optical axis.

ellipsometry, dolomite, complex refractive index, ↗

Krypton-81 in groundwater of the Culebra Dolomite near the Waste Isolation Pilot Plant, New Mexico

TheWaste Isolation Pilot Plant (WIPP) in New Mexico is the first geologic repository for disposal of transuranic nuclear waste fromdefense-related programs of the US Department of Energy. It is constructed within halite beds of the Permian-age Salado Formation. The Culebra Dolomite, confined within Rustler Formation evaporites overlying the Salado Formation, is a potential pathway for radionuclide transport from the repository to the accessible environment in the human-disturbed repository scenario. Although extensive subsurface characterization and numerical flow modeling of groundwater has been done in the vicinity of theWIPP, few studies have used natural isotopic tracers to validate the flow models and to better understand solute transport at this site. The advent of Atom-Trap Trace Analysis (ATTA) has enabled routine measurement of cosmogenic 81Kr (half-life 229,000 yr), a near-ideal tracer for long-term groundwater transport. We measured 81Kr in saline groundwater sampled from two Culebra Dolomite monitoring wells near the WIPP site, and compared 81Kr model ages with reverse particle-tracking results of well-calibrated flow models. The 81Kr model ages are ~130,000 and ~330,000 yr for high-transmissivity and low-transmissivity portions of the formation, respectively. Compared with flow model results which indicate a relatively young mean hydraulic age (~32,000 yr), the 81Kr model ages imply substantial physical attenuation of conservative solutes in the Culebra Dolomite and provide limits on the effective diffusivity of contaminants into the confining aquitards.

Sturchio, Neil C.↗

Carbonate stability in the earth's mantle - A vibrational spectroscopic study of aragonite and dolomite at high pressures and temperatures

The structural changes of aragonite and dolomite taking place at high pressures and temperatures were investigated by measuring the Raman spectra of these materials to pressures of 23 and 28 GPa (generated in a diamond anvil cell), respectively; in addition, the IR spectra of aragonite were measured to 40 GPa. The spectroscopic data demonstrated that, at 300 K, dolomite and aragonite samples were stable to pressures of 28 and 41 GPa, respectively. No phase transitions were observed following heating of aragonite and dolomite to temperatures of 2000 K and 800 K, respectively. The mode Grueneisen parameters indicate that the carbonate group in these two minerals is relatively insensitive to pressure, with the dominant compaction mechanism being the compression of the Ca and Mg polyhedra.

Kraft, Susan↗

Estimated Refractive Indices of Calcite, Dolomite, and Magnesite: ~0.3-500 M.

Carbonate minerals are germane to questions involving volatile and climate history on Mars [e.g., 1-2]. In particular, the abundance of carbonate-bearing minerals can provide broad useful bounds on the amount of CO2 out-gassed into the atmosphere over its history and their spatial distribution and mineralogy can yield constraints on the environments in which they were produced. Earth-based, orbital, and landed spectral observations provide evidence for the presence of carbonates in the Martian environment [3-6]. Infrared observations made from spacecraft near Mars were interpreted to indicate the presence of carbonates. [6] associated the carbonates with the surface dust and interpreted the mineralogy as being consistent with magnesite (MgCO3). Near- infrared observations from Mars orbit have been interpreted to suggest magnesite outcrops in restricted locations [7-9]. Quantitative estimates of the abundance of carbonates on Mars range from 0-3% [3], 2-5% [6], less than a few percent [10], and <10% [8]. With the growing evidence for magnesite on Mars additional quantitative estimates can be provided via theoretical modeling of the reflectance from the Martian surface. Calcite (CaCO3) and dolomite ((Ca,Mg)CO3) are identified in Asian dust [2-17%], [10] and calcite in Saharan dust [~8-10% [12-15]. The importance of op- tical constants at visible and near-infrared wavelengths as proxies for estimating the effects at infrared wave- lengths, has been investigated [15]. The growing evidence for Mg-carbonates on Mars, the presence of calcite and dolomite in terrestrial aero- sols, and general lack of optical constants for these materials in the visible- to mid-infrared (VMIR, ~0.3-6 ❍m) has motivated the current effort to estimate the optical constants of calcite, dolomite, and magnesite in the VMIR.

Roush, T. L.↗

Treating tar sands formations with dolomite

A method for treating a karsted formation containing heavy hydrocarbons and dolomite includes providing heat to at least part of one or more karsted layers in the formation from one or more heaters located in the karsted layers. A temperature in at least one of the karsted layers is allowed to reach a decomposition temperature of dolomite in the formation. The dolomite is allowed to decompose and at least some hydrocarbons are produced from at least one of the karsted layers of the formation.

02 PETROLEUM↗

Olivine, dolomite and ceramic filters in one vessel to produce clean gas from biomass

Highlights: • Syngas free of particles and with very low amount of tar is produced from biomass gasification. • Combination is tested of primary catalyst in the gasifier fluidized bed with catalytic ceramic candles in its freeboard. • Remarkable process intensification and thermal integration is obtained. • The adoption of catalytic filter candles doesn’t increase the required standard filtration surface in practical applications. - Abstract: Heavy organic compounds produced during almond shells gasification in a steam and/or air atmosphere, usually called tar, are drastically reduced in the product gas by using simultaneously in one vessel a ceramic filter placed in the freeboard and a mixture of olivine and dolomite particles in the fluidized bed of the gasifier. The content of tar in the product gas during a reference gasification test with air, in presence of fresh olivine particles only, was 8600 mg/Nm{sup 3} of dry gas. By gasifying biomass with steam at the same temperature level of 820 °C in a bed of olivine and dolomite (20% by weight), and in the presence of a catalytic ceramic filter inserted in the freeboard of the fluidized bed gasifier, the level of tar was brought down to 57 mg/Nm{sup 3} of dry producct gas, with a decrease of more than two orders of magnitude.

09 BIOMASS FUELS↗

Long-term calcination/carbonation cycling and thermal pretreatment for CO{sub 2} capture by limestone and dolomite

Capturing carbon dioxide is vital for the future of climate-friendly combustion, gasification, and steam-re-forming processes. Dry processes utilizing simple sorbents have great potential in this regard. Long-term calcination/carbonation cycling was carried out in an atmospheric-pressure thermogravimetric reactor. Although dolomite gave better capture than limestone for a limited number of cycles, the advantage declined over many cycles. Under some circumstances, decreasing the carbonation temperature increased the rate of reaction because of the interaction between equilibrium and kinetic factors. Limestone and dolomite, after being pretreated thermally at high temperatures (1000 or 1100{sup o}C), showed a substantial increase in calcium utilization over many calcination/carbonation cycles. Lengthening the pretreatment interval resulted in greater improvement. However, attrition was significantly greater for the pretreated sorbents. Greatly extending the duration of carbonation during one cycle was found to be capable of restoring the CO{sub 2} capture ability of sorbents to their original behavior, offering a possible means of countering the long-term degradation of calcium sorbents for dry capture of carbon dioxide. 12 refs., 12 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Magnesium production by the Pidgeon process involving dolomite calcination and MgO silicothermic reduction: Thermodynamic and environmental analyses

Thermochemical equilibrium calculations indicate the possibility of considerable fuel savings and CO{sub 2} emission avoidance in the three steps of the Pidgeon process: (a) calcination of dolomite; (b) production of ferrosilicon from quartz sand, coal, and iron oxide; (c) silicothermic reduction of calcined dolomite by ferrosilicon to magnesium. All three steps should benefit from application of concentrated solar energy as the source of high-temperature process heat, while the first two steps may be adapted to the coproduction of syngas. For the production of ferrosilicon, an experimental study was carried out by thermogravimetry as a model for a solar-driven process. The net reaction at 1823 K was shown to be represented by Fe{sub 2}O{sub 3} + 4SiO{sub 2} + 11C {yields} 2FeSi{sub s} + 10CO{sub g} + SiC{sub s} + SiO{sub g}, confirmed by gas chromatographic analysis of the evolved CO and by XRD identification of the solid products FeSi and SiC. This product mixture agrees with that predicted for the thermochemical equilibrium, but differs from that reported in the literature for the electric arc process.

01 COAL, LIGNITE, AND PEAT↗