Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISPLACED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Freeze-In dark matter with displaced signatures at colliders

Dark matter, X, may be generated by new physics at the TeV scale during an early matter-dominated (MD) era that ends at temperature T{sub R}≪ TeV. Compared to the conventional radiation-dominated (RD) results, yields from both Freeze-Out and Freeze-In processes are greatly suppressed by dilution from entropy production, making Freeze-Out less plausible while allowing successful Freeze-In with a much larger coupling strength. Freeze-In is typically dominated by the decay of a particle B of the thermal bath, B→X. For a large fraction of the relevant cosmological parameter space, the decay rate required to produce the observed dark matter abundance leads to displaced signals at LHC and future colliders, for any m{sub X} in the range keV <m{sub X}<m{sub B} and for values of m{sub B} accessible to these colliders. This result applies whether the early MD era arises after conventional inflation, when T{sub R} is the usual reheat temperature, or is a generic MD era with an alternative origin. In the former case, if m{sub X} is sufficiently large to be measured from kinematics, the reheat temperature T{sub R} can be extracted. Our result is independent of the particular particle physics implementation of B→X, and can occur via any operator of dimension less than 8 (4) for a post-inflation (general MD) cosmology. An interesting example is provided by DFS axion theories with TeV-scale supersymmetry and axino dark matter of mass GeV to TeV, which is typically overproduced in a conventional RD cosmology. If B is the higgsino, h-tilde, Higgs, W and Z particles appear at the displaced decays, h-tilde→ha-tilde, Za-tilde and h-tilde{sup ±}→W{sup ±}a-tilde. The scale of axion physics, f, is predicted to be in the range (3×10{sup 8}−10{sup 12}) GeV and, over much of this range, can be extracted from the decay length.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Retention properties in displacement damaged ultra-fine grain tungsten exposed to divertor plasma

One of the main advantages of using tungsten (W) as a plasma facing material (PFM) is its low uptake and retention of tritium. However, in high purity (ITER grade) W, hydrogenic retention increases significantly with neutron-induced displacement damage in the W lattice. This experiment examines an alternative W grade PFM, ultra-fine grain (UFG) W, to compare its retention properties with ITER grade W after 12 MeV Si ion displacement damage up to 0.6 dpa (displacements per atom.) Following exposure to plasma in the DIII-D divertor, D retention was then assessed with Nuclear Reaction Analysis (NRA) depth profiling up to 3.5 µm and thermal desorption spectrometry (TDS). Undamaged specimens were also included in our test matrix for comparison. For all samples, D release peaks were observed during TDS at approximately 200 °C and 750 °C. For the ITER-grade W specimens, the intensity of the 750 °C release peak was more pronounced for specimens that had been pre-damaged. Conversely, UFG samples that had been damaged by 12 MeV Si showed enhancement of the lower temperature release peak (200 °C). NRA profiles also reveal a higher D concentration for UFG W samples up to the peak in the damage profile at a depth of 2 m. Overall, we observed that the total trapped inventory in UFG W was 20% higher than ITER grade W in the undamaged case and 10% higher in the damaged case. A comparison of NRA and TDS data indicates that a larger fraction of the total retained D is trapped near the surface (86–100%) in UFG W pre-damaged to 0.6 dpa compared with ITER grade W (39–61%). Further examination of the UFG material with microscopy is recommended for a definitive determination of the types of defects responsible for D trapping. Our results highlight some potential trade-offs associated UFG W regarding its performance from a tritium retention standpoint. That said, our TDS results indicate that this enhanced inventory can be released by baking at relatively low temperatures (<500 °C), providing an avenue for minimizing tritium retention in this material that would be practical for implementation in a tokamak.

Barton, J↗

Lateral displacement and rotational displacement sensor

A position measuring sensor formed from opposing sets of capacitor plates measures both rotational displacement and lateral displacement from the changes in capacitances as overlapping areas of capacitors change. Capacitances are measured by a measuring circuit. The measured capacitances are provided to a calculating circuit that performs calculations to obtain angular and lateral displacement from the capacitances measured by the measuring circuit.

47 OTHER INSTRUMENTATION↗

Mitigation of upward and downward vertical displacement event heat loads with upper or lower massive gas injection in DIII-D

Intentionally triggered upward and downward vertical displacement events (VDEs) leading to disruptions were pre-emptively mitigated with neon massive gas injection (MGI) coming from either above or below the plasma. Global indicators of disruption mitigation effectiveness (conducted heat loads, radiated power, and vessel motion) do not show a clear improvement when mitigating with the gas jet located closer to the VDE impact area. A clear trend of improved mitigation is observed for earlier MGI timing relative to the VDE impact time. The plasma edge magnetic perturbation is seen to lock to a preferential phase during the VDE thermal quench, but this phase is not clearly matched by preliminary attempts to fit to the conducted heat load phase. Clear indications of plasma infra-red (IR) emission are observed both before and during the disruptions. This IR emission can affect calculation of disruption heat loads; here, the time decay of post-disruption IR signals is used to correct for this effect.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Threshold displacement energies and defect formation energies in Y2Ti2O7

Ab initio molecular dynamics simulations have been carried out to determine both the threshold displacement energies Ed and corresponding defect configurations, and ab initio methods have been used to accurately determine the formation energies in Y2Ti2O7. The minimum Ed is found to be 27 eV for a Y recoil along the <100> direction, 31.5 eV for Ti atoms along the <100> direction, 14.5 eV for O48f atoms along the <110> direction and 13 eV for O8b atoms along the <111> direction. The average Ed value along three directions determined is 35.1, 35.4, 17.0 and 16.2 eV for yttrium, titanium, O48f and O8b atoms, respectively. Cation interstitials at vacant 8a sites, which are generally occupied by oxygen anions, and at the bridge sites between two neighboring cations along the <010> direction are observed after low energy recoil events. A systematic study of the defect formation energies suggests that cation interstitials, which are located at 8a sites and bridge sites along the <010> direction, and in split configurations along the <010>, <110> or <111> direction, are all stable in these configurations. It is suggested that the relative stability of cation interstitials may provide a pathway of driving ion-irradiation induced amorphization in Y2Ti2O7.

Ab initio molecular dynamics↗

Nuclear microprobe investigation of the effects of ionization and displacement damage in vertical, high voltage GaN diodes

Radiation responses of high-voltage, vertical gallium-nitride (GaN) diodes were investigated using Sandia National Laboratories’ nuclear microprobe. Effects of the ionization and the displacement damage were studied using various ion beams. We found that the devices show avalanche effect for heavy ions operated under bias well below the breakdown voltage. Here, the displacement damage experiments showed a surprising effect for moderate damage: the charge collection efficiency demonstrated an increase instead of a decrease for higher bias voltages.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Stochastic Gain Degradation in III-V Heterojunction Bipolar Transistors due to Single Particle Displacement Damage

As device dimensions decrease single displacement effects are becoming more important. We measured the gain degradation in III-V Heterojunction Bipolar Transistors due to single particles using a heavy ion microbeam. Two devices with different sizes were irradiated with various ion species ranging from oxygen to gold to study the effect of the irradiation ion mass on the gain change. From the single steps in the inverse gain (which is proportional to the number of defects) we calculated Cumulative Distribution Functions to help determine design margins. The displacement process was modeled using the Marlowe Binary Collision Approximation (BCA) code. The entire structure of the device was modeled and the defects in the base-emitter junction were counted to be compared to the experimental results. While we found good agreement for the large device, we had to modify our model to reach reasonable agreement for the small device.

42 ENGINEERING↗

Correlation of a Bipolar-Transistor-Based Neutron Displacement Damage Sensor Methodology with Proton Irradiations

For this research, a bipolar-transistor-based sensor technique has been used to compare silicon displacement damage from known and unknown neutron energy spectra generated in nuclear reactor and high-energy-density physics environments. The technique has been shown to yield 1-MeV(Si) equivalent neutron fluence measurements comparable to traditional neutron activation dosimetry. This study significantly extends previous results by evaluating three types of bipolar devices utilized as displacement damage sensors at a nuclear research reactor and at a Pelletron particle accelerator. Ionizing dose effects are compensated for via comparisons with 10-keV x-ray and/or cobalt-60 gamma ray irradiations. Non-ionizing energy loss calculations adequately approximate the correlations between particle-device responses and provide evidence for the use of one particle type to screen the sensitivity of the other.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Four-Electron Donor Hemilabile n 3 -PPh 3 Ligand that Binds Through a C = C Bond Rather than an Agostic C-H Interaction, and Displacement of the C = C by Methyl Iodide or Water

Hydride transfer from Cp(CO) 2 (PPh 3 )MoH to Ph 3 C + BAr'4 [Ar' = 3,5-bis(trifluoromethyl)phenyl] produces [Cp(CO) 2 (η 3 PPh 3 )Mo] + [BAr'4] . Spectroscopic and crystallographic data indicate that one C=C of a Ph ring is weakly bound to the Mo, so that the PPh 3 ligand is four-electron donor ligand. Computations (DFT/B3LYP and MP2 on [Cp(CO) 2 (η 3 PPh 3 )Mo] + and [Cp(CO) 2 (η 3 PH 2 Ph)Mo] + , and DFT/B3LYP on [Cp(CO) 2 (η 3 PHtBuPh)Mo] + and [Cp(CO) 2 (η 3 PH2Ph)Nb]) provide further information on the bonding, and on the preference for bonding of the metal to the C=C bond rather than an agostic C H interaction found in many related complexes. The hemilabile C=C bond is readily displaced by CH 3 I or H 2 O, and crystal structures are reported for [Cp(CO) 2 (PPh 3 )Mo(ICH 3 )] + and [Cp(CO) 2 (PPh 3 )Mo(OH 2 )] + . The equilibrium constant for [Cp(CO) 2 (η 3 PPh 3 )Mo] + + ICH 3 to give [Cp(CO) 2 (PPh 3 )Mo(ICH 3 )] + is Keq = 5.2 x 10 2 M -1 in CD 2 Cl 2 at 22 °C.

36 MATERIALS SCIENCE↗

Development of a laser Doppler displacement encoder system with ultra-low-noise-level for linear displacement measurement with subnanometer resolution - Final CRADA Report

An U.S. DOE Cooperative Research and Development Agreement (CRADA) between ANL and Optodyne, Inc. has been established to develop a prototype laser Doppler displacement encoder system with ultra-low noise level for linear measurements to sub-nanometer resolution for synchrotron radiation applications. We have improved the heterodyne efficiency and reduced the detector shot noises by proper shielding and adding a low-pass filter. The laser Doppler displacement encoder system prototype demonstrated a ~ 1 nm system output noise floor with single reflection optics. With multiple-pass optical arrangement, 0.1 nm scale closed-loop feedback control is achieved.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Response of Waveguide-Integrated Germanium-on-Silicon p-i-n Photodiodes to Neutron Displacement Damage

The effects of 14-MeV neutron displacement damage (DD) on waveguide-integrated germanium-on-silicon p-i-n photodiodes (PDs) for silicon photonics have been investigated up to fluences of 7.5×1012 n/cm2 (14 MeV), or 1.4×1013 n1-MeVeq/cm2(Si). The study includes measurements of dark current-voltage characteristics across temperature from 150-375 K, measurements of PD junction capacitance, spectral response measurements from 1260 nm to 1360 nm, and frequency response measurements. The devices are found to be susceptible to DD-induced carrier removal effects; however, they also continue to operate without meaningful impact to performance for the DD dose levels examined. Since the PD test chips include silicon photonic integrated grating couplers and waveguides which carry the optical signal to the PD, some assessment of the impact of DD on these passive devices can also be inferred. Finally, this work does not examine the short-term annealing or transient behavior of the DD, and instead has only considered the lasting damage that remains after any initial period of room temperature annealing.

42 ENGINEERING↗

Crystal Structure of Moganite and Its Anisotropic Atomic Displacement Parameters Determined by Synchrotron X-ray Diffraction and X-ray/Neutron Pair Distribution Function Analyses

The crystal structure of moganite from the Mogán formation on Gran Canaria has been re-investigated using high-resolution synchrotron X-ray diffraction (XRD) and X-ray/neutron pair distribution function (PDF) analyses. Our study for the first time reports the anisotropic atomic displacement parameters (ADPs) of a natural moganite. Rietveld analysis of synchrotron XRD data determined the crystal structure of moganite with the space group I2/a. The refined unit-cell parameters are a = 8.7363(8), b = 4.8688(5), c = 10.7203(9) Å, and β = 90.212(4)°. The ADPs of Si and O in moganite were obtained from X-ray and neutron PDF analyses. The shapes and orientations of the anisotropic ellipsoids determined from X-ray and neutron measurements are similar. The anisotropic ellipsoids for O extend along planes perpendicular to the Si-Si axis of corner-sharing SiO4 tetrahedra, suggesting precession-like movement. Neutron PDF result confirms the occurrence of OH over some of the tetrahedral sites. We postulate that moganite nanomineral is stable with respect to quartz in hypersaline water. The ADPs of moganite show a similar trend as those of quartz determined by single-crystal XRD. In short, the combined methods can provide high-quality structural parameters of moganite nanomineral, including its ADPs and extra OH position at the surface. This approach can be used as an alternative means for solving the structures of crystals that are not large enough for single-crystal XRD measurements, such as fine-grained and nanocrystalline minerals formed in various geological environments.

58 GEOSCIENCES↗