Heterodyne phase shifter with inductive delay line pickup provides stepless phase shift
Heterodyne phase shifter with inductive delay line pickup providing stepless phase shift
PHASE SHIFT↗
SEARCH · Engineering Papers
Results for “DELAY LINE”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Delay Line Detectors for the UVCS and Sumer Instruments on the SOHO Satellite
Microchannel plate based detectors with cross delay line image readout have been rapidly implemented for the SUMER and UVCS instruments aboard the Solar Orbiting Heliospheric Observatory (SOHO) mission to be launched in July 1995. In October 1993 a fast track program to build and characterize detectors and detector control electronics was initiated. We present the detector system design for the SOHO UVCS and SUMER detector programs, and results from the detector test program. Two deliverable detectors have been built at this point, a demonstration model for UVCS, and the flight Ly alpha detector for UVCS, both of which are to be delivered in the next few weeks. Test results have also been obtained with one other demonstration detector system. The detector format is 26mm x 9mm, with 1024 x 360 digitized pixels, using a low resistance Z stack of microchannel plates (MCP's) and a multilayer cross delay line anode (XDL). This configuration provides gains of approximately 2 x 10(exp 7) with good pulse height distributions (less than 50% FWHM) under uniform flood illumination, and background levels typical for this configuration (approximately 0.6 event cm (exp -2)sec(exp -1)). Local counting rates up to about 400 events/pixel/sec have been achieved with no degradation of the MCP gain. The detector and event encoding electronics achieves about 25 millimeter FVHM with good linearity (plus or minus approximately 1 pixel) and is stable to high global counting rates (greater than 4 x 10(exp 5) events sec(exp -1)). Flat field images are dominated by MCP fixed pattern noise and are stable, but the MCP multifiber modulation usually expected is uncharacteristically absent. The detector and electronics have also successfully passed both thermal vacuum and vibration tests.
Seigmund, O. H. W.↗
Mixed Modeling of a SAW Delay Line Using VHDL-AMS
To aid in the development of SAW sensors for aerospace applications we have created a model of a SAW Delay line using VHDL. The model implements the Impulse Response method to calculate the frequency response, impedance, and insertion loss. The model includes optimization for the number of finger pairs in the IDTs and for the aperture height. This paper presents the model and the results from the model for a SAW delay line design.
Wilson, William C.↗
1st Order Modeling of a SAW Delay Line using MathCAD(Registered)
To aid in the development of SAW sensors for Integrated Vehicle Health Monitoring applications, a first order model of a SAW Delay line has been created using MathCadA. The model implements the Impulse Response method to calculate the frequency response, impedance, and insertion loss. This paper presents the model and the results from the model for a SAW delay line design. Integrated Vehicle Health Monitoring (IVHM) of aerospace vehicles requires rugged sensors having reduced volume, mass, and power that can be used to measure a variety of phenomena. Wireless systems are preferred when retro-fitting sensors onto existing vehicles [1]. Surface Acoustic Wave (SAW) devices are capable of sensing: temperature, pressure, strain, chemical species, mass loading, acceleration, and shear stress. SAW technology is low cost, rugged, lightweight, and extremely low power. Passive wireless sensors have been developed using SAW technology. For these reasons new SAW sensors are being investigated for aerospace applications.
Wilson, William C.↗
Multichannel delay line memory for scientific data accumulation.
Scientific data handling system using passive magnetostrictive multichannel delay line memory
MAGNETIC MEMORY↗
Nonlinear Control of the Optical Delay Line Pathlength
This paper discusses the problem of designing a control system for an interferometer delay line which contains coarse-vernier loops. The vernier loop compensator has nonlinear dynamics and includes a local feedback path containing a deadzone.
nonlinear↗
Fiber-optic delay-line stabilization of heterodyne optical signal generator and method using same
The present invention is a laser heterodyne frequency generator system with a stabilizer for use in the microwave and millimeter-wave frequency ranges utilizing a photonic mixer as a photonic phase detector in a stable optical fiber delay-line. Phase and frequency fluctuations of the heterodyne laser signal generators are stabilized at microwave and millimeter wave frequencies by a delay line system operating as a frequency discriminator. The present invention is free from amplifier and mixer 1/.function. noise at microwave and millimeter-wave frequencies that typically limit phase noise performance in electronic cavity stabilized electronic oscillators. Thus, 1/.function. noise due to conventional mixers is eliminated and stable optical heterodyne generation of electrical signals is achieved.
Logan, Ronald T.↗
On the LTI Properties of Adaptive Feedforward Systems with Tap Delay-Line Regressors
It is shown that an adaptive system whose regressor is formed by tap delay-line (TDL) filtering of a multitone sinusoidal signal is representable as a parallel connection of a linear time-invariant (LTI) block and a linear time-varying (LTV) block.
tap delay-line (TDL) filtering linear time-invaria↗
On The LTI Properties of Adaptive Feedforward Systems With Tap Delay-Line Regressors
It is shown that an adaptive system whose regressor is formed by tap delay-line (TDL) filtering of a multitone sinusoidal signal is representable as a parallel connection of a linear time-invariant (LTI) block and a linear time-varying (LTV) block.
Tap Delay-Line Regressors Time-Invariant↗
Reduction of losses in low-frequency /2 MHz/ surface-wave delay line by outgassing
Surface waves are attenuated by a fluid or gas surrounding the surface of propagation, an effect caused by frictional losses determined by the fluid or gas viscosity and by the emission of compression waves into the environment. The paper reports a large reversible reduction in attenuation of surface waves at frequencies as low as 2 MHz by outgassing treatments of some materials, suggesting that at such frequencies vacuum encapsulation is a desirable procedure. Outgassing experiments were performed on a delay line constructed from high-density p.z.t.-8 (lead-zirconate-titanate). The delay line configuration was a slab waxed onto a metal base with coaxial connectors mounted near and connected by gold-wire leads to the interdigital finger sets. Output signal enhancements by as much as 8 dB were achieved after overnight evacuation at 10 to the -2 torr at room temperature.
Tittmann, B. R.↗
Tapped delay line simulation of randomly time-variant channels
Theory, mathematical model, and computer simulation of randomly time-variant channels applied in tapped delay line development
MATHEMATICAL MODEL↗
A solid state acoustic variable time delay line Patent
Development and characteristics of solid state acoustic variable time delay line using direct current voltage and radio frequency pulses
Fitzgerald, T. M.↗
Implementation of Nonlinear Control Laws for an Optical Delay Line
This paper discusses the implementation of a globally stable nonlinear controller algorithm for the Realtime Interferometer Control System Testbed (RICST) brassboard optical delay line (ODL) developed for the Interferometry Technology Program at the Jet Propulsion Laboratory.
nonlinear↗
Highly stable microwave delay line
TWM /Traveling Wave Master/ comb structure serves as a highly stable microwave delay line for determining the short-term stability of the hydrogen maser frequency standards used in the deep space network. Cryogenic cooling is used to minimize signal attenuation and thermal noise.
Higa, W. H.↗
Control of systems with tiered actuators with application to interferometer optical delay line control
High accuracy feedback control systems might employ tiers of actuators with different properties. Such systems performance can be estimated in advance using Bode integrals. The systems can be made globally stable with good transient responses and close to the best possible disturbance rejection when controllers include high-order linear links and multiple nonlinear dynamic links. The design approach is exemplified by designing conb-ol system for an interferometer optical delay line.
delay line control↗
Near optimum delay-line detection filters for serial detection of MSK signals
A method for designing transversal delay-line filter approximations to the matched filter for the serial detection of minimum-shift keyed (MSK) modulated signals is given. Two configurations are characterized in terms of signal-to-noise ratio degradation at a bit error rate (BER) of 10 to the -6th. One is shown to depart less than 0.3 dB from the ideal matched filter performance when its parameter values are optimized. A lumped-element equivalent is also given and shown to provide a degradation of less than 0.4 dB at a BER of 10 to the -6th
Ziemer, R. E.↗
LTI Representations of Adaptive Systems with Tap Delay-Line Regressors under Sinusoidal Excitation
It is shown that and adaptive system whose regressor is formed by tap delay-line (TDL) filtering of a multitone sinusoidal signal is representable as a parallel connection of a linear time-invariant (LTI) block and a linear time-varying (LTV) block. Furthermore, a norm-bound (induced 2-norm) is computed explicity on the LTV block and is shown to decrease as N -1 where N is the number of taps.
adaptive↗
Delay-Line Anode For Microchannel-Plate Spectrometer
Photon-counting read-out system for microchannel-plate spectrometer includes delay line and timing circuit to measure wavelength coordinate and wedge/wedge charge-division system to measure orthogonal spatial coordinate. System proves advantageous for portable two-dimensional spectrometers having large image planes and for which design requirements include simplicity, reliability, low power consumption, and low mass.
Lampton, M.↗