Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Could Microphysics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Peering into cloud physics using ultra-fine resolution radar and lidar systems

Cloud microphysical processes, such as droplet activation, condensational growth, and collisional growth, play a central role in the evolution of clouds and precipitation. Accurate representations of these processes in numerical models are challenging partially due to incomplete understanding of them at the process-level arising from limited systematic observations. Most surface-based active remote sensors, including today’s operational cloud radars and lidars, have a resolution on the order of tens of meters. This resolution is insufficient to resolve cloud microphysical processes that manifest at finer (meter and sub-meter) scales. A new set of ultra-high-resolution ground-based radar and lidar systems have been developed to address this observational gap. The newly developed 94-GHz cloud radar has a range resolution down to 2.8 m, or a factor of 10 finer than typical radars, using a large bandwidth and quadratic phase coding techniques. The lidar has a range resolution down to 10 cm, or a factor of 100 finer than typical lidars, using a time-gated time-correlated single photon counting technique. Such high-resolution observations were previously only achievable through in situ aircraft measurements. Even then, aircraft measurements do not permit continuous long-term cloud observation as is possible with ground-based remote sensing instruments. In this study, the first-light cloud observations from the new radar and lidar systems are shown to reveal detailed cloud structures that conventional sensors could only perceive in a bulk sense, thus providing new avenues to investigate cloud microphysical processes and their impact on weather and climate.

54 ENVIRONMENTAL SCIENCES↗

The role of local shipping emissions in aerosol-cloud interactions in the central Arctic

Arctic shipping is projected to increase as sea ice retreats, yet the impact of modern low-sulfur ship emissions on Arctic clouds and radiation remain poorly constrained. We use year-long in situ observations from the MOSAiC expedition to characterize ship-aerosol-cloud interactions for an icebreaker burning ultra-low sulfur fuel (0.1% mass per mass). Exhaust plumes were found to be strongly enriched in Aitken-mode particles, organic aerosol, and black carbon, but showed no detectable enhancement in particulate sulfate. Despite reduced hygroscopicity relative to ambient aerosols, ship emissions substantially increased local cloud condensation nuclei concentrations. A droplet activation parameterization was applied to quantify responses in cloud droplet number concentration ( N d ) to ship-induced perturbations in low-level Arctic clouds. In winter, abundant background accumulation-mode particles from Arctic haze supplied nearly all cloud droplets, while additional particles from ship emissions had little impact on N d . In contrast, during summer months, when unperturbed background aerosol concentrations are low, ship emissions nearly doubled N d compared to average background conditions and increased N d by a factor of five compared to very clean background conditions (25th percentile of background aerosol number concentrations). Longwave radiative transfer simulations for typical conditions of summer Arctic low-level clouds/fog suggest that these ship-induced increases in N d locally (i.e. <100 km downwind) lead to enhanced net surface longwave fluxes and consequent warming, primarily for optically thin clouds (liquid water path (LWP) ⩽ 30 g·m −2 ). For LWP = 10 g · m −2 , ship emissions lead to an increase of 1 W · m −2 in cloud longwave forcing at the surface compared to average unperturbed conditions (+7% relative increase), and up to 4 W · m −2 when compared to very clean background conditions (+22% relative increase). Even ultra-low sulfur fuel emissions can therefore locally and episodically modify Arctic cloud microphysics and radiative properties, especially during summer, implying that future increases in Arctic shipping could have non-negligible regional climate impacts.

Arctic↗

Volcanoes, Polar Clouds and Arctic Ozone

Satellite observations and model calculations show 5 to 10% local column ozone loss in some tropical and mid latitude locations, following El Chichon and Mount Pinatubo eruptions. The rapid deepening of the Antarctic ozone hole in the early 1980s has also been partially attributed to chemistry on volcanic aerosols from a number of large eruptions. Here the effects of volcanoes on Arctic polar processes are explored. Large polar stratospheric cloud particles that cause denitrification cannot form in a volcanically perturbed environment. Denitrification can increase Arctic ozone loss by up to 30% in a future colder climate. However, we show that enhanced chemical processing on volcanic aerosols can increase Arctic ozone loss in a cold year by about 60% independent of denitrification. A coupled chemistry-microphysics model is used to show that widespread distribution of volcanic aerosols in 2000 could have caused severe springtime ozone depletion in the Arctic stratosphere. While, volcanic aerosols can strongly affect the current Arctic column ozone abundance in a cold year, denitrification effects on ozone can only become important in a much colder lower stratosphere.

Tabazadeh, Azadeh↗

Improving High-Resolution Weather Forecasts using the Weather Research and Forecasting (WRF) Model with an Updated Kain-Fritsch Scheme

Efforts to improve the prediction accuracy of high resolution (1-10 km) surface precipitation distribution and variability are of vital importance to local aspects of air pollution, wet deposition, and regional climate. However, precipitation biases and errors can occur at these spatial scales due to uncertainties in initial meteorological conditions and/or grid-scale cloud microphysics schemes. In particular, it is still unclear to what extent a subgrid-scale convection scheme could be modified to bring in scale-awareness for improving high-resolution short-term precipitation forecasts in the WRF model. To address these issues, we introduced scale-aware parameterized cloud dynamics for high-resolution forecasts by making several changes to the Kain-Fritsch (KF) convective parameterization scheme in the WRF model. These changes include subgrid-scale cloud-radiation interactions, a dynamic adjustment timescale, impacts of cloud updraft mass fluxes on grid-scale vertical velocity, and lifting condensation level-based entrainment methodology that includes scale dependency. A series of 48-hour retrospective forecasts using a combination of three treatments of convection (KF, updated KF, and the use of no cumulus parameterization), two cloud microphysics schemes and two types of initial condition datasets were performed over the U.S. southern Great Plains on 9- and 3-km grid spacings during the summers of 2002 and 2010. Results indicate that (1) the source of initial conditions play a key role in high-resolution precipitation forecasting, and (2) our updated KF scheme greatly alleviates the excessive precipitation at 9-km grid spacing and improves results at 3-km grid spacing as well. Overall, we found that the updated KF scheme incorporated into a high-resolution model does provide better forecasts for precipitation location and intensity.

convective parameterization↗

Investigations of Clouds and Aerosols on Mars, Venus and Titan

This final report was included as part of a new proposal. This new proposal was selected for funding on 9 Nov. 1999. For Titan our interest during the past few years was to explain the observed asymmetry in the albedo. We suggested earlier, from one-dimensional modeling studies, that vertical transport rates were comparable to particle fall speeds. Since heating of the upper atmosphere, which drives dynamical motions, is largely due to the aerosols, a nonlinear interaction between dynamics, radiative heating and particle microphysics is possible. We pursued this interaction in a two-dimensional model. We showed that the observed variations in the albedo between the two hemispheres and over an orbital cycle, could be due to dynamical motions suspending particles so that particle sizes and optical depths vary across the planet. In the Cassini time frame, future studies of this interaction between dynamics, radiation and microphysics may be worthwhile using, the strong modeling base that others, and we have developed. In our recently approved proposal, however, we plan to extend our modeling to hydrocarbon clouds that lie at lower levels. We know very little about such clouds, and numerical models for their properties are non-existent. These clouds may be observed by the Huygen's Probe, and by the Cassini orbiter, so predictions of their properties should help in the analysis of Cassini data. We have also developed a sophisticated model for the lower, condensational, clouds on Venus. In this model we explored the water vapor budget on Venus, and the properties of the clouds such as particle size distribution. During the past few years we have applied our model of the water ice clouds on Mars to new data sets from Pathfinder, and Mars Global Surveyor. We have compared our predictions of cloud properties with those seen by Pathfinder, and found reasonable agreement.

Toon, Owen B.↗

Investigations of Clouds and Aerosols on Mars, Venus and Titan

For Titan our interest during the past few years was to explain the observed asymmetry in the albedo. We suggested earlier, from one-dimensional modeling studies, that vertical transport rates were comparable to particle fall speeds. Since heating of the upper atmosphere, which drives dynamical motions, is largely due to the aerosols, a non- linear interaction between dynamics, radiative heating and particle microphysics is possible. We pursued this interaction in a two-dimensional model. We showed that the observed variations in the albedo between the two hemispheres and over an orbital cycle, could be due to dynamical motions suspending particles so that particle sizes and optical depths vary across the planet. In the Cassini time frame, future studies of this interaction between dynamics, radiation and microphysics may be worthwhile using the strong modeling base that others, and we have developed. In our recently approved proposal, however, we plan to extend our modeling to hydrocarbon clouds that lie at lower levels. We know very little about such clouds, and numerical models for their properties are non-existent. These clouds may be observed by the Huygen's Probe, and by the Cassini orbiter, so predictions of their properties should help in the analysis of Cassini data. We have also developed a sophisticated model for the lower, condensational, clouds on Venus. In this model we explored the water vapor budget on Venus, and the properties of the clouds such as particle size distribution. Most researchers have investigated the upper clouds on Venus, which are essentially a photochemical aerosol with a long lifetime. The lower clouds, however, are similar to stratus clouds on Earth. These clouds have short lifetimes, and are tightly coupled to the dynamics at the base of the Venus cloud deck. We believe that the holes in these clouds seen at near infrared wavelengths by Galileo are related to some interaction between dynamics and cloud physics. One goal of our recently approved proposed work is to better understand this interaction, and to better understand how these clouds may vary if the climate of Venus were to vary. During the past few years we have applied our model of the water ice clouds on Mars to new data sets from Pathfinder, and Mars Global Surveyor. We have compared our predictions of cloud properties with those seen by Pathfinder, and found reasonable agreement. More recently we have improved our model by including a radiative transfer algorithm and a boundary layer transport scheme . The goal of this work is to understand the thermal inversions seen in Mars Global Surveyor data. We find that the inversions are created by clouds radiatively cooling the atmospheric layers in which the clouds form. We have also initiated laboratory work on the physics of carbon dioxide particle formation. In our recently approved work we propose to use these laboratory data, and to extend our modeling to carbon dioxide clouds in the Martian atmosphere.

Toon, Owen B.↗

A Theory for the Balance between Warm Rain and Ice Crystal Processes of Precipitation in Mixed-Phase Clouds

Abstract Mixed-phase clouds contain both supercooled cloud liquid and ice crystals. In principle, precipitation may be initiated either by the liquid phase or by the ice phase. Ice crystals may grow by vapor diffusion to become snow (“ice crystal process”), forming “cold” precipitation. Equally, cloud droplets, when large enough, coalesce to form “warm” precipitation by the “warm rain process.” Warm rain could be supercooled and freeze as “warm” graupel. In the present paper, a new simplified theoretical analysis is provided to examine the microphysical system consisting of three species of hydrometeor, namely, cloud liquid, “cold ice” (crystals, snow), and “warm rain” (frozen or supercooled). This is obtained by nondimensionalizing and simplifying the evolution equations for the mass of each species. Analytical formulas are given for equilibria. Feedback analysis shows that the sign of the feedback is linked to the abundance of precipitation, with a neutral surface in the 3D phase space. The system’s precipitation amount explodes while in the initial unstable regime, crossing the neutral surface and approaching the equilibrium point that is a stable attractor. Positive and negative feedbacks are elucidated. In a standard case, the cold ice mass is about 1000 times larger than the warm rain mass. To illustrate the physical behavior of the theory, sensitivity tests are performed with respect to environmental conditions (e.g., aerosol, updraft speed) and microphysical parameters (e.g., riming and sedimentation rates for cold ice). Cold ice prevails, especially in fast ascent, due to its low bulk density, favoring slow sedimentation and a wide cross-sectional area for riming. Significance Statement The theory elucidates how the ice phase can prevail in the precipitation from any mixed-phase clouds with supercooled cloud liquid and crystals. The ice phase radically suppresses cloud liquid by riming when active and “wins” the competition against coalescence. This prevalence of ice is shown to arise from the low bulk density of snow. The cloud is viewed as a system of negative and positive feedbacks that prevail in realms of stability and instability in a 3D phase space.

Meteorology & Atmospheric Sciences↗

Impact of Aerosols on Convective Clouds and Precipitation

Aerosols are a critical.factor in the atmospheric hydrological cycle and radiation budget. As a major agent for clouds to form and a significant attenuator of solar radiation, aerosols affect climate in several ways. Current research suggests that aerosols have a major impact on the dynamics, microphysics, and electrification properties of continental mixed-phase convective clouds. In addition, high aerosol concentrations in urban environments could affect precipitation variability by providing a significant source of cloud condensation nuclei (CCN). Such pollution . effects on precipitation potentially have enormous climatic consequences both in terms of feedbacks involving the land surface via rainfall as well as the surface energy budget and changes in latent heat input to the atmosphere. Basically, aerosol concentrations can influence cloud droplet size distributions, the warm-rain process, the cold-rain process, cloud-top heights, the depth of the mixed-phase region, and the occurrence of lightning. Recently, many cloud resolution models (CRMs) have been used to examine the role of aerosols on mixed-phase convective clouds. These modeling studies have many differences in terms of model configuration (two- or three-dimensional), domain size, grid spacing (150-3000 m), microphysics (two-moment bulk, simple or sophisticated spectral-bin), turbulence (1st or 1.5 order turbulent kinetic energy (TKE)), radiation, lateral boundary conditions (i.e., closed, radiative open or cyclic), cases (isolated convection, tropical or midlatitude squall lines) and model integration time (e.g., 2.5 to 48 hours). Among these modeling studies, the most striking difference is that cumulative precipitation can either increase or decrease in response to higher concentrations of CCN. In this presentation, we review past efforts and summarize our current understanding of the effect of aerosols on convective precipitation processes. Specifically, this paper addresses the following topics: observational evidence of the effect of aerosols on precipitation processes, and results from (CRM) simulations. Note that this presentation is mainly based on a recent paper published in Geophy. Rev. (Tao et al. 2012).

Tao, Wei-Kuo↗

Controlled generation of large volumes of atmospheric clouds in a ground-based environmental chamber

Atmospheric clouds were generated in a 23,000 cubic meter environmental chamber as the first step in a two part study on the effects of contaminants on cloud formation. The generation procedure was modeled on the terrestrial generation mechanism so that naturally occurring microphysics mechanisms were operative in the cloud generation process. Temperature, altitude, liquid water content, and convective updraft velocity could be selected independently over the range of terrestrially realizable clouds. To provide cloud stability, a cotton muslin cylinder 29.3 meters in diameter and 24.2 meters high was erected within the chamber and continuously wetted with water at precisely the same temperature as the cloud. The improved instrumentation which permitted fast, precise, and continual measurements of cloud temperature and liquid water content is described.

Hettel, H. J.↗

Influence of Entrainment on Centimeter-Scale Cloud Microphysics in Marine Stratocumulus Clouds Observed during CSET

Abstract Cloud microphysical relationships observed during the Cloud System Evolution in the Trades (CSET) campaign held between Northern California and Hawaii were analyzed to study the effects of entrainment and subsequent mixing of free-tropospheric and cloudy air on cloud microphysical properties of marine stratocumulus clouds. The data measured by Holographic Detector for Clouds (HOLODEC) were extensively used because they could provide the 3D positions and sizes of droplets within sample volume on the centimeter scale, making it possible to explore the 3D spatial distribution of droplets, which has not been possible for conventional cloud probes. This study focused on analyzing the 3D spatial distribution of droplets and visual traits of inhomogeneous mixing and on quantifying the relationship between 3D spatial distributions and traits of inhomogeneous mixing. Two types of spatial distributions are compared. The first is measured droplet spatial distribution and the second type is generated randomly distributed droplets using the Monte Carlo approach, that is, to analyze whether or not clustering is strong enough to classify as a clustered distribution for a hologram. The difference between the two types of spatial distributions depends on whether they are affected by entrainment and mixing. The holograms observed near the cloud top, where the effects of entrainment and mixing would be immediate, showed relatively high confidence in the significance test for spatially clustered populations of droplets. Moreover, spatially clustered holograms appeared to exhibit stronger visual traits of inhomogeneous mixing than perfectly randomly distributed holograms only when observed near the cloud top. On the other hand, these characteristics did not appear for holograms observed deeper into the cloud where the effects of entrainment and mixing would be reduced. Such 3D structural characteristics of droplet distributions seem to be consistent with vertical circulation mixing.

Meteorology & Atmospheric Sciences↗

On CCN Effects upon Convective Cold Pool Timing and Features

Abstract Cold pools produced by deep convection can initiate new convection, and their representation in larger-scale weather and climate models could improve prediction of the extent and timing of upscale growth. Cold pools originate from latent cooling from precipitation changing phase, but little attention has been paid to microphysical influences on cold pool characteristics, particularly CCN effects. Datasets obtained from the CACTI and RELAMPAGO field campaigns, along with idealized numerical modeling, are utilized to investigate the hypothesis that convective storms forming in higher-CCN environments generate their first surface rainfall later, delaying cold pool initiation. Aircraft observations of CCN and shallow convection on 9 days do suggest a CCN effect. Those ingesting more CCN contained fewer drizzle drops, although a decreased cloud depth with increasing CCN was also likely a limiting factor. In three of those cases that later developed into deep convection, the timing of cold pool onset was not ubiquitously delayed in environments with more CCN. Idealized numerical simulations suggest that an ordinary thunderstorm can experience small delays in cold pool onset with increasing CCN due to changes in graupel production, but CCN effects on the cold pool from a supercell thunderstorm can be easily overpowered by its unique dynamics. A strong inverse relationship between cold pool strength, expansion rate, and depth with increasing CCN is suggested by the results of the ordinary thunderstorm simulation. Further consideration of CCN appears warranted for future cold pool parameterization development, but other environmental factors affecting storm morphology and precipitation cannot be ignored.

Meteorology & Atmospheric Sciences↗

Impact of Cirrus Crystal Shape on Solar Spectral Irradiance: A Case Study for Subtropical Cirrus

Profiles of in situ measurements of ice crystal size distribution of subtropical cirrus were used to calculate solar spectral irradiances above and below the clouds. Spheres and nonspherical ice crystal habits (columns, hollows, plates, bullets, and aggregates) were assumed in the calculations. The simulation results were compared to irradiance measurements from the NASA Solar Spectral Flux Radiometer. The microphysical and radiation data were collected by three aircraft during CRYSTAL-FACE. Two cirrus cases (optical thickness of about 1 and 7) from two mission dates (26 and 23 July 2002) were investigated in detail. The measured downwelling and upwelling irradiance spectra above the cirrus could mostly be reproduced by the radiation model to within +/- 5-10% for most ice crystal habits. Below the cirrus the simulations disagreed with the measured irradiances due to surface albedo variability along the flight track, and nonoptimal colocation between the microphysical and irradiance measurements. The impact of shape characteristics of the crystals was important for the reflected irradiances above the optically thin cirrus, especially for small solar zenith angles, because in this case single-scattering dominated the solar radiation field. For the cirrus of moderate optical thickness the enhanced multiple scattering tended to diminish particular shape features caused by nonspherical single-scattering. Within the ice absorption bands the shape-related differences in the absorption characteristics of the individual nonspherical ice crystals were amplified if multiple scattering prevailed. Furthermore, it was found that below the cloud the shape sensitivity of the downwelling irradiance spectra is larger compared to the nonsphericity effects on reflected irradiances above the cirrus. Finally, it was shown that the calculated cirrus solar radiative forcing could vary by as much as 26% depending on the ice crystal habit.

Wendisch, Manfred↗

Observations of marine stratocumulus clouds during FIRE

The First International Satellite Cloud Climatology Project Regional Experiment (FIRE) to study extensive fields of stratocumulus clouds off the coast of California is presented. Measurements on the regional and detailed local scales were taken, allowing for a wide interpretation of the mean, turbulent, microphysical, radiative, and chemical characteristics of stratocumulus. Multiple aircraft and ground-based remote-sensing systems were used to study the time evolution of the boundary layer structure over a three-week period, and probes from tethered balloons were used to measure turbulence and to collect cloud-microphysical and cloud-radiative data. The observations provide a base for studying the generation maintenance and dissipation of stratocumulus clouds, and could aid in developing numerical models and improved methods for retrieving cloud properties by satellite.

Albrecht, Bruce A.↗

Limiting Rotation Rate of Neutron Stars from Crust Breaking and Gravitational Waves

Abstract Neutron stars are not observed to spin faster than about half their breakup rate. This limiting rotational frequency may be related to the strength of their crusts. As a star spins up from accretion, centrifugal forces stress the crust. We perform finite-element simulations of rotating neutron stars and find that the crust fails at rotation rates about half the breakup rate. Given uncertainties in microphysics, we have not determined the crust configuration after this failure. Instead, we argue that the crust may fail in an asymmetric way and could produce a configuration with a significant ellipticity (fractional difference in moments of inertia). If the ellipticity is large, a rotating star will radiate gravitational waves that may limit further spin-up. These stars may be promising sources for LIGO/VIRGO and next-generation gravitational-wave detectors.

Morales, J. A.↗

Cirrus Cloud Radiative and Microphysical Properties from Ground Observations and In Situ Measurements During FIRE 1991 and Their Application to Exhibit Problems in Cirrus Solar Radiative Transfer Modeling

Measurements from the FIRE 1991 cirrus cloud field experiment in the central United States are presented and analyzed. The first part focuses on cirrus microphysical properties. Aircraft 2D-probe in situ data at different cloud altitudes were evaluated for cirrus cases on four different days. Also presented are simultaneous data samples from balloonborne videosondes. Only these balloonsondes could detect the smaller crystals. Their data suggest (at least for midlatitude altitudes below 10 km) that ice crystals smaller than 15 microns in size are rare and that small ice crystals not detected by 2D-probe measurements are radiatively of minor importance, as overlooked 2D-probe crystals account for about 10% of the total extinction. The second part focuses on the link between cirrus cloud properties and radiation. With cloud macrophysical properties from surface remote sensing added to the microphysical data and additional radiation measurements at the surface, testbeds for radiative transfer models were created. To focus on scattering processes, model evaluations were limited to the solar radiative transfer by comparing calculated and measured transmissions of sunlight at the surface. Comparisons under cloud-free conditions already reveal a model bias of about +45 W/sq m for the hemispheric solar downward broadband flux. This discrepancy, which is (at least in part) difficult to explain, has to be accounted for in comparisons involving clouds. Comparisons under cirrus cloud conditions identify as the major obstacle in cirrus solar radiative transfer modeling the inability of one-dimensional radiative transfer models to account for horizontal inhomogeneities. The successful incorporation of multidimensional radiative transfer effects will depend not only on better models but critically on the ability to measure and to define characteristic inhomogeneity scales of cloud fields. The relative minor error related to the microphysical treatment is in part a reflection of the improved understanding on solar scattering on ice crystals over the last decade and of the available wealth on ice-crystal size and shape data for this study. In absence of this information, uncertainties from microphysical cirrus model assumptions will remain high.

Kinne, Stefan↗

Detecting Falling Snow from Space

There is an increased interest in detecting and estimating the amount of falling snow reaching the Earth's surface in order to fully capture the atmospheric water cycle. An initial step toward global spaceborne falling snow algorithms includes determining the thresholds of detection for various active and passive sensor channel configurations, snow event cloud structures and microphysics, snowflake particle electromagnetic properties, and surface types. In this work, cloud resolving model simulations of a lake effect and synoptic snow event were used to determine the minimum amount of snow (threshold) that could be detected by the following instruments: the W -band radar of CloudSat, Global Precipitation Measurement (GPM) Dual-frequency Precipitation Radar (DPR) Ku and Ka band, and the GPM Microwave Imager (GMI) channels from 10 to 183 plus or minus 7 GHz. Eleven different snowflake shapes were used to compute radar reflectivities and passive brightness temperatures. Notable results include: (1) the W-Band radar has detection thresholds more than an order of magnitude lower than the future GPM sensors, (2) the cloud structure macrophysics influences the thresholds of detection for passive channels, (3) the snowflake microphysics plays a large role in the detection threshold for active and passive instruments, (4) with reasonable assumptions, "the passive 166 GHz channel has detection threshold values comparable to the GPM DPR Ku and Ka band radars with approximately 0.05 g per cubic meter detected at the surface, or an approximately 0.5-1 millimeter per hr. melted snow rate (equivalent to 0.5-2 centimeters per hr. solid fluffy snowflake rate). With detection levels of falling snow known, we can focus current and future retrieval efforts on detectable storms and concentrate advances on achievable results. We will also have an understanding of the light snowfall events missed by the sensors and not captured in the global estimates.

Gail Skofronick-Jackson↗

Aerosol-Cloud Interactions From Aviation Soot Emissions

Current models estimate global aviation contributes approximately 5% to the total anthropogenic climate forcing, with aerosol-cloud interactions having the greatest effect. However, radiative forcing estimates from aviation aerosol-cloud interactions remain undetermined. There is an expected significant increase in aircraft emissions with aviation demand expected to rise by over 4% per year. Soot may play an important role in the ice nucleation of aircraft-induced cirrus formation due to a high emission rate, but the ice nucleating properties are poorly constrained. Understanding the microphysical processes leading to atmospheric ice crystal formation is crucial for the reliable parameterization of aerosol-cloud interactions in climate models due to their impact on precipitation and cloud radiative properties. Ice nucleation of aircraft-emitted soot is potentially affected by particle morphology with condensation of supercooled water occurring in pores followed by ice nucleation. However, soot has heterogeneous properties and undergoes atmospheric aging and oxidation that could change surface properties and contribute to complex ice nucleation processes. Further, this review synthesizes current knowledge of ice nucleation catalyzed by aviation in the cirrus regime and its effects on global radiative forcing. Further research is required to determine the ice nucleation and microphysical processes of cirrus cloud formation from aviation emissions in both controlled laboratory and field investigations to inform models for more accurate climate predictions and to provide efficient mitigation strategies.

54 ENVIRONMENTAL SCIENCES↗

The Impact of Aerosols on Cloud and Precipitation Processes: Cloud-Resolving Model Simulations

Aerosols and especially their effect on clouds are one of the key components of the climate system and the hydrological cycle [Ramanathan et al., 2001]. Yet, the aerosol effect on clouds remains largely unknown and the processes involved not well understood. A recent report published by the National Academy of Science states "The greatest uncertainty about the aerosol climate forcing - indeed, the largest of all the uncertainties about global climate forcing - is probably the indirect effect of aerosols on clouds [NRC, 2001]." The aerosol effect on clouds is often categorized into the traditional "first indirect (i.e., Twomey)" effect on the cloud droplet sizes for a constant liquid water path [Twomey, 1977] and the "semi-direct" effect on cloud coverage [e.g., Ackerman et al ., 2001]." Enhanced aerosol concentrations can also suppress warm rain processes by producing a narrow droplet spectrum that inhibits collision and coalescence processes [e.g., Squires and Twomey, 1961; Warner and Twomey, 1967; Warner, 1968; Rosenfeld, 19991. The aerosol effect on precipitation processes, also known as the second type of aerosol indirect effect [Albrecht, 1989], is even more complex, especially for mixed-phase convective clouds. Table 1 summarizes the key observational studies identifying the microphysical properties, cloud characteristics, thermodynamics and dynamics associated with cloud systems from high-aerosol continental environments. For example, atmospheric aerosol concentrations can influence cloud droplet size distributions, warm-rain process, cold-rain process, cloud-top height, the depth of the mixed phase region, and occurrence of lightning. In addition, high aerosol concentrations in urban environments could affect precipitation variability by providing an enhanced source of cloud condensation nuclei (CCN). Hypotheses have been developed to explain the effect of urban regions on convection and precipitation [van den Heever and Cotton, 2007 and Shepherd, 2005]. Please see Tao et al. (2007) for more detailed description on aerosol impact on precipitation. Recently, a detailed spectral-bin microphysical scheme was implemented into the Goddard Cumulus Ensemble (GCE) model. Atmospheric aerosols are also described using number density size-distribution functions. A spectral-bin microphysical model is very expensive from a computational point of view and has only been implemented into the 2D version of the GCE at the present time. The model is tested by studying the evolution of deep tropical clouds in the west Pacific warm pool region and summertime convection over a mid-latitude continent with different concentrations of CCN: a low "clean" concentration and a high "dirty" concentration. The impact of atmospheric aerosol concentration on cloud and precipitation will be investigated.

Tao, Wei-Kuo↗