Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cornell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Co-Investigator Proposal for Enstrophy - - Filamentation of Auroral Currents

Cornell University provided three instruments for the Enstrophy experiment: an electric field meter, a plasma wave receiver, and a magnetometer for measuring FAC. The electric field meter consisted of a 6 m Weitzmann boom system with analog signal processing and 12 bit ADC, which yielded one electric field component instantaneously and a two dimensional electric field every half spin. The plasma wave receiver used the same sensing system with the addition of pre-amplifiers in the spheres to sense plasma waves up to and including the electron Langmuir frequency. Signal processing employed a variety of continuous and snap shot techniques depending on the frequency range and band width. The science magnetometer provided by Cornell University was a Billingsly design fluxgate previously used on spacecraft missions but without radiation hardening. The magnetometer was mounted on a one meter, stiff aluminum "flop-down" boom. The Enstrophy payload was launched on february 11, 1999. Because of a design flaw in the event timers, the magnetometer boom was deployed before the payload despun. As a result the magnetometer separated mechanically from the boom but maintained electrical connection. This was confirmed by the calculation of the scalar magnetic field from all three vector components of the magnetic field. However, the individual vector values had no scientific value. The electric field and plasma wave instrumentation worked as designed. The data from these instruments was provided to the University of New Hampshire and to the Principal Investigator, as proposed.

Kintner, Paul M.↗
NASA NTRS1999

Wearout Free

Because of on an SBIR contract with NASA, Cornell-Dubilier has been able to commercialize electrolytic capacitors, based on the design of hermetically sealed electrolytic capacitors used by the Marshall Space Flight Center. The NASA contract was for the development of hermetic aluminum electrolytic capacitors, and through which Cornell-Dubilier's Type MLP and Type MLS Flatback Aluminum Electrolytic Capacitors have emerged. As opposed to gassing electrolytic capacitors, the development of nongassing electrolytes makes it possible to manufacture hermetic aluminum electrolytic capacitors free of "wearout" from electrolytic loss. Tests of the hermetic capacitors designed for NASA demonstrated expected life-spans of more than 20 years.

Source record↗
NASA NTRS2003

Sheet Flows, Avalanches, and Dune Evolution on Earth and Mars

This investigation is a collaboration between researchers at Cornell University, the University of Florida, and the University of Rennes 1, France. Flow modeling at Cornell University focused on mechanisms for the suspension and transport of wind-blown sand that are important in both terrestrial and Martian environments. These mechanisms include the saltation (or jumping) of grains, collisions between grains, and the interaction of grains with the velocity fluctuations of the turbulent wind. Of particular interest are sheet flows; these are relatively thin, highly concentrated regions of grains flowing near the ground under the influence of a strong turbulent wind. In them, the grains are suspended by interparticle collisions. Sheet flows may be relatively rare events, but they have the capacity to move great amounts of sand. In order to describe sheet flows, a turbulent mixture theory was formulated for particles in a fluid in which fluctuations in the volume fiaction of the particles take place on the scale of the turbulent eddies. Ensemble averaged equations for particle and fluid mass, momentum, and energy and fluid rate of dissipation were expressed in terms of Farve (concentration) averaged velocities and the associated velocity fluctuations. Correlations that describe the turbulent suspension of particles and dissipation of turbulent energy of both phases due to fluid particle interactions were modeled and boundary conditions at the bed and at the upper surface of the collisional flow were formulated. The boundary conditions at the upper surface were tested in a numerical simulation developed at the University of Florida. Steady and unsteady solutions for steady and unsteady fully-developed flows were obtained over a range of wind speeds fiom the lowest for which collisional between particles occurred to at which turbulent suspension is found to dominate collisional suspension. Below the value of the wind speed at which collisions between particles were unimportant, numerical solutions were obtained for the velocity distribution function and the resulting fields of concentration, particle and gas mean velocity, and particle shear stress for the steady two-dimensional saltation of spherical sand particles driven by a turbulent wind over a bed characterized by a simple relationship (the splash function) between the properties of incoming particles and those of the rebounding particles and other particles ejected fiom the bed. At the University of Rennes 1, experiments devoted to the characterization of the splash function for beds consisting of either random or ordered arrays of spheres in two- dimensions were completed. These indicated the role played by the packing geometry in the rebound and ejection of grains. Preliminary experiments on response of a three- dimensional collision bed to a collision with a single particle were performed. Data was taken with a single camera focused on the plane of collision. Here, for example, the decrease of the effective coefficient of restitution of the bed with an increase of the angle of incidence of the incoming particle has been measured. Other experiments on avalanches at Rennes studied the properties of the flows of particles that are responsible for the motion of the leeward side of a dune. In these, the dependence of the initiation of avalanches on the packing and depth of the particles was measured. Particle migration was studied in inclined flows of a binary mixture of disks and the mechanisms of diffision and segregation were isolated and characterized. The influence of side wall on dense, rapid inclined flows was measured and shown to be the reason why the angle of the free surface in such flows can exceed the static angle of repose. Future research will be devoted to a better understanding the transition between saltating (collisionless) and collisional flows as the wind speed the increases. This will involve the understanding of the evolution of the splash function as clisions with the bed become more numerous, more frequent, and more violent.

Source record↗
NASA NTRS1999

Three-Dimensional Gear Crack Propagation Studied

Gears used in current helicopters and turboprops are designed for light weight, high margins of safety, and high reliability. However, unexpected gear failures may occur even with adequate tooth design. To design an extremely safe system, the designer must ask and address the question, "What happens when a failure occurs?" With gear-tooth bending fatigue, tooth or rim fractures may occur. A crack that propagates through a rim will be catastrophic, leading to disengagement of the rotor or propeller, loss of an aircraft, and possible fatalities. This failure mode should be avoided. A crack that propagates through a tooth may or may not be catastrophic, depending on the design and operating conditions. Also, early warning of this failure mode may be possible because of advances in modern diagnostic systems. One concept proposed to address bending fatigue fracture from a safety aspect is a splittooth gear design. The prime objective of this design would be to control crack propagation in a desired direction such that at least half of the tooth would remain operational should a bending failure occur. A study at the NASA Lewis Research Center analytically validated the crack-propagation failsafe characteristics of a split-tooth gear. It used a specially developed three-dimensional crack analysis program that was based on boundary element modeling and principles of linear elastic fracture mechanics. Crack shapes as well as the crack-propagation life were predicted on the basis of the calculated stress intensity factors, mixed-mode crack-propagation trajectory theories, and fatigue crack-growth theories. The preceding figures show the effect of the location of initial cracks on crack propagation. Initial cracks in the fillet of the teeth produced stress intensity factors of greater magnitude (and thus, greater crack growth rates) than those in the root or groove areas of the teeth. Crack growth was simulated in a case study to evaluate crack-propagation paths. Tooth fracture was predicted from the crackgrowth simulation for an initial crack in the tooth fillet region. This was the desired failure mode for an ultrasafe design. Lastly, tooth loads on the uncracked mesh of the split-tooth design were up to five times greater than those on the cracked mesh if equal deflections of the cracked and uncracked teeth were considered. This effect needs to be considered in the design of a split-tooth configuration. This work was done in-house at Lewis in support of the National Rotorcraft Technology Center project, Ultra-Safe Gear Design, with the Boeing Defense and Space Group. The crack-propagation package was developed by the Cornell Fracture Group at Cornell University. The reported results, which are the initial findings of Lewis gear-crackpropagation research for the Rotorcraft Base Program, will be further investigated to develop generalized gear design guidelines.

Lewicki, David G.↗
NASA NTRS2010

Modeling a Large Submillimeter-Wave Observatory

The 25 meter aperture Cornell Caltech Atacama Telescope (CCAT) will provide an enormous increase in sensitivity in the submillimeter bands compared to existing observatories, provided it can establish and maintain excellent image quality. To accomplish this at a very low cost, it is necessary to conduct accurate engineering trades, including the most effective segment and wavefront sensing and control approach, to determine the best method for continuously maintaining wavefront quality in the operational environment. We describe an integrated structural/optical/controls model that provides accurate performance prediction. We also detail the analysis methods used to quantify critical design trades.

Segment Sensing↗
NASA NTRS1963

Ninth Symposium (International) on Combustion

The Ninth Symposium (International) on Combustion was held at Cornell University, Ithaca, New York, August 27 to September 1, 1962, under the auspices of the Combustion Institute. Registration was in excess of 600, with more than 100 attending from Australia, Belgium, Canada, France, Germany, Great Britain, Hungary, Israel, Italy, Japan, Netherlands, Spain and Sweden. Over 200 papers were submitted for consideration, of which 121 were placed on the program and 108 printed in the Proceedings. Two Discussions (Detonations, organized by Dr. D. R. White, General Electric Research Laboratory; Fundamental Flame Processes, organized by Dr. W. H. Avery, APL/The Johns Hopkins University) occupied 4 half-day sessions each. Preprints of all Discussions papers were available several weeks prior to the Symposium. Three Colloquia (Modeling Principles, organized by Professor D. 13. Spalding, Imperial College; Reactions and Phase Changes in Supersonic Plow, organized by Professor P. P. Wegener, Yale University; Reciprocating Engine Combustion Research, organized by Professor E. S. Starkman, University of California) occupied 2 or 3 half-day sessions each. Contributed Papers in many areas of the combustion field were presented in 10 half-day sessions. Comments on nearly every paper are included in the Proceedings.

Gas phase↗
NASA NTRS1973

Pulsed high-energy gamma rays from the Crab Nebula.

Review of recorded data on the pulsed radiation detected by the Cornell 100-inch gas-Cerenkov gamma-ray telescope within 1 degree of the Crab Nebula in direction, at hundreds of MeV up to more than 1 GeV, coincident in time with optical pulses from NP 0532. A main pulse and a secondary pulse are shown to contain about an equal number of events and display evidence of being narrower than at lower energies. There is weak evidence for further pulse structure in the interval between these two peaks, and also for an unmodulated gamma-ray component about equal to the time-averaged pulsed flux.

Mcbreen, B.↗
NASA NTRS1974

The spectrum of cosmic electron with energies between 6 and 100 GeV

This experiment was carried out during three balloon flights which provided a total exposure of 3500 + or - 60 sq m sec sterad at an average depth of 4.8 g/sq cm The detector, in which the development of cascade showers in a 33.7 rl absorber was sampled by 10 scintillation counters and 216 Geiger-Muller tubes, was calibrated at the Cornell Electron Synchrotron, the separation of cosmic electrons from the nuclear background was confirmed by extensive analysis of data from the flights, from the calibration and from ground level exposure. The spectral intensity of primary cosmic ray electrons were found in particles/sq m sec sterad GeV. Similarly, the ground level spectrum of secondary cosmic ray electrons was also found. The steepness of the spectrum of cosmic electrons relative to that of nuclei implies one of the following conclusions: either the injection spectrum of electrons is steeper than that of nuclei, or the electron spectrum has been steepened by Compton/synchrotron losses in the energy range covered by the experiment.

Meegan, C. A.↗
NASA NTRS1974

Transition radiation from relativistic electrons in periodic radiators

The generation and detection of transition radiation have been studied in a series of experiments with electrons from 1 to 15 GeV at SLAC and at the Cornell Synchrotron. Periodic radiators, consisting of thin plastic foils stretched in air at constant spacings, were used, and proportional chambers filled with krypton or xenon served as detectors. A detailed discussion of the theoretical predictions is given, and the measurements are systematically compared with the predictions by varying the most critical parameters, such as configuration of radiators and detectors, and energy of the electrons. In general, good agreement between theory and experiment has been found. On the basis of these results, the criteria are summarized under which transition radiation can readily be observed.

Cherry, M. L.↗
NASA NTRS1975

Upper limits of hard gamma-ray emission from six X-ray sources

The Cornell 100-inch gamma-ray telescope has been used to set upper limits for the gamma-ray flux above 400 MeV from the X-ray sources Cyg X-1, Cyg X-2, Cyg X-3, Cas A, Cas B, and Per X-1. An upper limit for the diffuse flux of the galactic disk was set which is consistent with OSO-3 and SAS-2 data. A new measurement of the atmospheric gamma-ray generation rate is presented.

Campbell, M.↗
NASA NTRS1975

The generation of transition radiation by relativistic particles in plastic foam radiators

The design of large area transition radiation detectors for highly relativistic particles can be greatly simplified if plastic foam radiators are employed. Using electron beams with energies 1-9 GeV at the Cornell synchrotron, we have studied the properties of a large variety of transition radiators consisting of commercially available foam materials. In most cases, a measurable transition radiation signal has been observed, but only a few materials have been found to be suitable for practical purposes. The observed radiation yield is in these cases very similar to that of equivalent multifoil radiators. A detailed discussion is given of the particle detection efficiency that can be obtained with high yield foam radiators.

Prince, T. A.↗
NASA NTRS1975

Change in the high-energy radiation from the Crab

On 1973 July 23, the Cornell gamma-ray telescope had a second exposure to the Crab Nebula and pulsar via balloon flight from Palestine, Texas. On the previous flight, 1971 October 6, the signal from the pulsar had been unmistakably clear, especially at the highest energies (above 800 MeV), and an unpulsed component of similar average power had also been discernible. On the second flight, despite higher altitude, longer exposure, and improved electronics, the pulsed signal was barely detectable and the dc component not observable at all. The drop in intensity seems to increase with energy, being only a factor of 2 at 200 MeV but an order of magnitude at 1 GeV. There is some indication (not compelling) that the gamma-ray flux may have changed even within the 6-hour exposure. The first flight may have viewed the Crab in a state of enhanced high-energy emission correlated with the glitches that occurred on 1971 August 1 and October 25.

Greisen, K.↗
NASA NTRS1980

Remote sensing for vineyard management

Cornell's Remote Sensing Program has been involved in a continuing investigation to assess the value of remote sensing for vineyard management. Program staff members have conducted a series of site and crop analysis studies. These include: (1) panchromatic aerial photography for planning artificial drainage in a new vineyard; (2) color infrared aerial photography for assessing crop vigor/health; and (3) color infrared aerial photography and aircraft multispectral scanner data for evaluating yield related factors. These studies and their findings are reviewed.

Philipson, W. R.↗
NASA NTRS1982

Diffraction studies of the high pressure phases of GaAs and GaP

High pressure structural phase transitions of GaAs and GaP have been studied by energy dispersive X-ray diffraction with the radiation from the Cornell High Energy Synchrotron Source. GaAs began to transform at 172 + or - 7 kbar to an orthorhombic structure possibly belonging to space group Fmmm. GaP transformed to a tetragonal beta-Sn type phase at 215 + or - 8 kbar. Although pressure transmitting media were used to minimize shear stresses in the specimens, the high pressure diffraction results were interpreted as showing evidence for planar defects in the specimens.

Baublitz, M., Jr.↗
NASA NTRS1974

Effect of wing-mounted nacelles on a 42 deg swept supercritical wing configuration at near-sonic speeds

An investigation was made to assess the effect of wing-mounted nacelles on a supercritical wing configuration at near-sonic Mach numbers. The investigation was made by utilizing the Cornell Aeronautical Laboratory 8-foot transonic tunnel and covered a Mach number range from 0.90 to 0.99. Force data and pressure measurements at selected locations were obtained. The investigation with the nacelles on included the effect of spanwise location of the nacelle (semispan locations of 35 and 70 percent) and the effect of area ruling for the nacelles located at the 35 percent semispan station. Tests were also made with the outboard nacelle extended forward so that it was directly adjacent to the inboard nacelle location. These tests provided a direct assessment of the extent of the nacelle interference flow field in a lateral direction.

Mckinney, L. W.↗
NASA NTRS1981

Remote sensing for forest applications in New York: Two case studies

Under-utilized forest resources in the Northeast can supply fiber to new markets. Information on forest resources, however, is often too aggregated to estimate available woody material with sufficient detail for planning specific projects. Over the past year, staff of Cornell University's Remote Sensing Program, under a grant from NASA, assisted New York State agency personnel by assessing available woody material for two potential development projects, a wood-fired power plant and a particle board manufacturing plant. These feasibility studies are reviewed, illustrating how information derived from high-altitude aircraft photographs, LANDSAT imagery, and available supporting data were integrated to arrive at estimates of woody material.

Stanturf, J. A.↗
NASA NTRS1983

Remote sensing program

Built on Cornell's thirty years of experience in aerial photographic studies, the NASA-sponsored remote sensing program strengthened instruction and research in remote sensing, established communication links within and beyond the university community, and conducted research projects for or with town, county, state, federal, and private organizations in New York State. The 43 completed applied research projects are listed as well as 13 spinoff grants/contracts. The curriculum offered, consultations provided, and data processing facilities available are described. Publications engendered are listed including the thesis of graduates in the remote sensing program.

Philipson, W. R.↗
NASA NTRS1984

Photometry of icy satellites: How important is multiple scattering in diluting shadows?

Voyager observations have shown that the photometric properties of icy satellites are influenced significantly by large-scale roughness elements on the surfaces. While recent progress was made in treating the photometric effects of macroscopic roughness, it is still the case that even the most complete models do not account for the effects of multiple scattering fully. Multiple scattering dilutes shadows caused by large-scale features, yet for any specific model it is difficult to calculate the amount of dilution as a function of albedo. Accordingly, laboratory measurements were undertaken using the Cornell Goniometer to evaluate the magnitude of the effect.

Buratti, B.↗