Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cobalt”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Synthesis and Characterization of Metastable Cobalt Honeycomb KCoAsO 4

The Kitaev model has served as a long-sought-after target in the realization of a quantum spin liquid that could host Majorana Fermions. Such non-Abelian anyons could revolutionize quantum computing if properly implemented to overcome decoherence. A 3d 7 electronic configuration, like Co 2+ , has been explored by theory and experimental work to design Kitaev materials. Here, in this study, we report the synthesis of a new cobaltate honeycomb material KCoAsO 4 . The compound is synthesized through a low-temperature solution route and crystallized in space group R¯3 with lattice parameters a = 5.0394(1) and c = 28.6790(1) as determined by neutron powder diffraction. The crystal structure follows motifs similar to those of the honeycomb compound BaCo2(AsO 4 ) 2 but presents differing magnetic behavior. Magnetization/heat capacity measurements on the powder show antiferromagnetic transition T N = 14 K. Two lower-temperature transitions are present in susceptibility at low field that resemble spin reorientations. Magnetization data as a function of field have curvature indicative of metamagnetic behavior below the magnetic ordering temperature, with the magnetic ordering suppressed upon application of a higher magnetic field. Computational studies suggest the presence of a weak nearest-neighbor Kitaev term, K 1 , consistent with related honeycomb cobaltates. Together, the data suggest that this material should present a new platform for developing Kitaev quantum spin liquids.

cobaltate↗
DOE OSTI2025

Effect of tert -Butyl Substitution on the Interactions of Cobalt Phthalocyanine with a Carbon Monoxide-Functionalized Tip

Supported cobalt phthalocyanines (CoPc) are promising catalysts for CO 2 reduction, a critical process for mitigating greenhouse gas emissions. Enhancing the catalytic performance of CoPc involves modifying the interaction between the cobalt center and intermediate species. This study focuses on the effects of tert-butyl substitution on CoPc using (tert-butyl) 4 CoPc, where the substitution can both directly alter the molecule’s intramolecular electronic structure and indirectly alter it by the bulky group weakening the interaction with the support. Toward this end, we investigated the structural and chemical properties of (tert-butyl) 4 CoPc on a Ag(111) surface at the single-molecule level using three-dimensional atomic force microscopy (AFM) with a CO-terminated tip and discussed them in comparison with data for unmodified CoPc and amino-substituted CoPc. Notably, distance-dependent force measurements revealed anomalies in the tert-butyl groups’ force curves, attributed to their rotational flexibility. The tert-butyl (t-butyl) groups were also observed to increase the attraction of the central Co atom to CO, but this effect was attributed largely to enhanced interactions of the back of the tip with the peripheral t-butyl groups. In conclusion, while this longer-range interaction would not be expected to impact the interaction of small molecules with the catalytic center, the results reveal the ability of AFM to characterize longer range environmental interactions that can enhance adsorption and subsequent reactions of larger molecules, as well as the role side chains that offer configurational adaptability may play in these interactions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Rheinheimera sp . T2C2 Bacterial Biofilm for Bioremediation of Cobalt(II)

Toxic metals, including cobalt, are often the cause of the contamination of rivers and lakes in mining regions. Heavy metal water pollution has been linked to numerous human health problems, prompting the need for environmental remediation. Existing techniques for removing heavy metals from water, such as chemical precipitation and filtration, produce toxic waste, are costly, or require high power consumption for pumping. Biosorption is a potential alternative strategy that is cost-effective and uses readily available and naturally produced biomass and living material to absorb pollutants. Engineering living materials, such as biofilms, which consist of living cells and a secreted polymer matrix, offer the potential to integrate toxin sensing, sequestration, and metabolism capabilities of cells to improve pollution remediation strategies. Alternative biofilm producing candidates need to be explored to implement these material capabilities. Previous biosorption studies have primarily used bacterial biofilms from known pathogens and/or generated toxic waste in the form of the absorbent material combined with the heavy metal. Here, we describe a recently isolated bacterium called Rheinheimera sp. T2C2 that forms biofilms with promising biosorption characteristics. T2C2 is an aquatic bacterium with low nutrient requirements and high biofilm production that is not known to be pathogenic. We demonstrate (1) the efficacy of Rheinheimera sp. T2C2 as a biosorbent for cobalt bioremediation; (2) how biosorption is altered by water conditions to establish the efficacy of this strategy in different environments; and (3) how the metal can be released from the biofilm for metal recycling. Our findings will provide a living materials strategy that overcomes the existing barriers for bioremediation and improves the health of ecosystems and humans through heavy metal removal and recycling.

Rheinheimera↗
DOE OSTI2025

Size‐Controlled Cobalt Nanoplates and Their Impact on Oxygen Evolution Catalysis

Controlling the size of nanoparticles is important in catalytic reactions, not only for tuning the surface area but also for modifying the electronic structure. However, achieving precise size control in 2D structures remains challenging. In this work, we demonstrate precise size control of cobalt nanoplates, ranging from 19 nm to 80 nm, which is achieved by tuning the ratio of two surfactants used in the synthesis. The 19 nm of Co nanoplates exhibit higher oxygen evolution reaction activity due to a higher proportion of {10$\overline{1}$1} to {0001} facets. In conclusion, this size control allows systematic investigation into how nanoplate dimensions influence catalytic performance in the oxygen evolution reaction, offering new insights into structure-activity relationships of cobalt nanocatalysts.

defect↗
DOE OSTI2025

Fullerene Promotes CO 2 Reduction to Methanol by a Cobalt(II) Phthalocyanine Electrocatalyst

Heterogenization of molecular electrocatalysts offers an attractive way to improve the catalytic selectivity and efficiency of CO 2 conversion to liquid fuels. Herein, we employ density functional theory to compare the mechanism of CO 2 RR by a cobalt(II) tetra(amino)phthalocyanine (Co(II)Pc(NH 2 ) 4 ) electrocatalyst with and without the presence of fullerene support. Our DFT calculations suggest that the CO 2 reduction mechanism is initiated by a metal-based electron reduction followed by subsequent CO 2 nucleophilic addition, electron transfer, proton transfer, water dissociation, and proton-coupled electron transfer steps that lead to CO and methanol formation. We show that graphitic interactions between the Co(II)Pc(NH 2 ) 4 electrocatalyst and C 60 support selectively improve the CO 2 RR to methanol at mild potentials. The undesirable hydrogen evolution reaction (HER) was also investigated for both electrocatalysts and proceeds via the protonation of the cobalt metal center over the nitrogen atom in the inner ring. The competition between the HER and the CO 2 RR was improved in favor of CO and methanol formation using the Co(II)Pc(NH 2 ) 4 @C 60 electrocatalyst. Overall, our results suggest C 60 as a promising graphitic support for molecular electrocatalysts integration for CO 2 catalysis.

Alcohols↗
DOE OSTI2025

Interfacial Properties of Gold and Cobalt Oxyhydroxide in Plasmon-Mediated Oxygen Evolution Reaction

Water electrolysis is one green approach of storing electrical energy within chemical bonds of the high-energy hydrogen gas (H2). The anodic reaction involved in the oxygen evolution reaction (OER) requires high kinetic overpotential on the overall rate of the process. Recently, plasmonic gold nanoparticles (Au NPs) have been added to enhance the charge transfer at the interface of the OER electrocatalysts and electrolyte under light illumination. However, mechanistic understanding of how Au NPs on the photo-assisted electrochemical process is still lacking. We applied a model system of plasmonic Au electrode and a cobalt (Co)-based OER electrocatalyst in alkaline electrolytes to investigate the plasmon-mediated OER process with (photo)electrochemical and spectroscopic studies. Our results demonstrated that the electrodeposited and surfactant-free plasmonic Au electrode could enhance the electrocatalytic performances of the Co-based electrocatalysts in the OER process with continuous visible and near infrared light illumination. Both the photothermal and energetic charge carriers were found to contribute to the enhanced OER performance based on the transient photocurrent studies, and the interfaces of Au and the Co-based electrocatalysts determined the enhancement mechanisms. The active phase of the cobalt based OER electrocatalyst at operating potentials was identified with electrochemical Raman measurements.

OER↗
DOE OSTI2026

Hydride and Seek: Comparing Crystallographic Hydride Placement Techniques with an Open-Shell Cobalt Complex

Locating hydrides is crucial in organometallic chemistry but difficult to do accurately using X-ray diffraction. Electron diffraction has been proposed as a way to overcome this problem but has not been systematically compared to neutron diffraction and to quantum crystallography (Hirshfeld atom refinement, HAR) to test this hypothesis. Here, we present a comparative analysis of methods for a terminal cobalt hydride complex by comparing a single-crystal neutron diffraction reference structure to results from single-crystal X-ray diffraction with and without Hirshfeld atom refinement (HAR, NoSpherA2), density functional theory (DFT), and electron diffraction (3D-ED/MicroED) refined under kinematical and dynamical formalisms. Conventional X-ray diffraction gives lower precision than neutron diffraction as expected. Despite expected improvements, HAR gives systematic deviation from the neutron benchmark. Interestingly, optimized DFT equilibrium geometries are closer to the neutron value than the value from HAR. On the other hand, electron diffraction with a high-quality data set coupled with dynamical refinement localizes the hydride in difference maps and gives excellent agreement with the neutron data. Dynamical refinement is crucial, as kinematical refinement does not allow assignment of a hydride peak. This cross-modal comparison defines the conditions under which 3D-ED/MicroED delivers high-precision metal–hydride distances for this open-shell cobalt hydride.

anions↗
DOE OSTI2025

Isolation of a Terminal Cobalt Nitride in a Metal–Organic Framework

Transition metal nitrides are reactive intermediates in biological and industrial processes. Chemists have synthesized molecular model complexes of such reactive species to understand their function and electronic requirements for new applications. However, molecular chemistry can suffer from intra- and intermolecular decomposition pathways, which preclude further discovery of unknown reactive species. Metal-organic frameworks offer an opportunity for creating long-lived forms of such species with the vacuum of the pore suppressing degradation while simultaneously enabling substrate access for controlled reactivity studies. Here, in this study, we report the characterization of an elusive terminal cobalt nitride species generated through photolysis or thermolysis of a site-isolated cobalt azide within the evacuated metal-organic framework CoN 3 -MFU-4l. The first crystal structure of such a species is presented, with vibrational, X-ray absorption, and electron paramagnetic resonance spectroscopies providing further direct evidence for its formation while elucidating its electronic structure. The system additionally enables subsequent reactivity studies with selected substrates, revealing a unique ambiphilic behavior for a metal nitride species.

Börgel, Jonas [University of California, Berkeley,↗
DOE OSTI2024

Effect of solvothermal synthesis parameters on the crystallite size and atomic structure of cobalt iron oxide nanoparticles

We here investigate how the synthesis method affects the crystallite size and atomic structure of cobalt iron oxide nanoparticles. By using a simple solvothermal method, we first synthesized cobalt ferrite nanoparticles of ca. 2 and 7 nm, characterized by Transmission Electron Microscopy (TEM), Small Angle X-ray scattering (SAXS), X-ray and neutron total scattering. The smallest particle size corresponds to only a few spinel unit cells. Nevertheless, Pair Distribution Function (PDF) analysis of X-ray and neutron total scattering data shows that the atomic structure, even in the smallest nanoparticles, is well described by the spinel structure, although with significant disorder and a contraction of the unit cell parameter. These effects can be explained by the surface oxidation of the small nanoparticles, which is confirmed by X-ray near edge absorption spectroscopy (XANES). Neutron total scattering data and PDF analysis reveal a higher degree of inversion in the spinel structure of the smallest nanoparticles. Neutron total scattering data also allow magnetic PDF (mPDF) analysis, which shows that the ferrimagnetic domains correspond to ca. 80% of the crystallite size in the larger particles. A similar but less well-defined magnetic ordering was observed for the smallest nanoparticles. Finally, we used a co-precipitation synthesis method at room temperature to synthesize ferrite nanoparticles similar in size to the smallest crystallites synthesized by the solvothermal method. Structural analysis with PDF demonstrates that the ferrite nanoparticles synthesized via this method exhibit a significantly more defective structure compared to those synthesized via a solvothermal method.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Electrocatalytic CO 2 reduction by a cobalt porphyrin mini-enzyme

Cobalt-mimochrome VI*a (CoMC6*a), a synthetic mini-enzyme with a cobalt porphyrin active site, is developed as a biomolecular catalyst for electrocatalytic CO 2 reduction in water. The catalytic turnover number reaches ∼14 000 for CO production with a selectivity of 86 : 5 over H 2 production under the same conditions. Varying the applied potential and the p K a of the proton donor was used to gain insight into the basis for selectivity. The protected active site of CoMC6*a is proposed to enhance selectivity for CO 2 reduction under conditions that typically favor H 2 production by related catalysts. CoMC6*a activity and selectivity change only marginally under air, indicating excellent oxygen tolerance.

Salamatian, Alison A. [Univ. of Rochester, NY (Uni↗
DOE OSTI2025

Cobalt–niobium co-doping of indium oxide: structural and adsorption/catalytic properties for CO 2 valorization

The co-doping of the indium oxide structure with cobalt and niobium is attempted using a microemulsion method to produce high-surface-area, mesoporous, functional materials. The co-doping leads to a major nanometric bixbyite oxide phase, with both cations occupying cation positions and affecting the size and shape of the oxide entities. For specific cobalt to niobium atomic ratios, the presence of a second surface phase is encountered. Such a surface phase corresponds to an ill-defined indium hydroxide-type phase. The coexistence of the two phases is a unique phenomenon associated with the presence of both cations, which play a decisive role in promoting the CO 2 adsorption capability of the solids, as well as the valorization of the molecule under dual heat–light excitation. The co-doping of indium oxide thus appears to be a unique way to intensify the analogous thermal (classical) catalytic process for the elimination/valorization of carbon dioxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Efficient Leaching of Metal Ions from Spent Li-Ion Battery Combined Electrode Coatings Using Hydroxy Acid Mixtures and Regeneration of Lithium Nickel Manganese Cobalt Oxide

Extensive use of Li-ion batteries in electric vehicles, electronics, and other energy storage applications has resulted in a need to recycle valuable metals Li, Mn, Ni, and Co in these devices. In this work, an aqueous mixture of glycolic and lactic acid is shown as an excellent leaching agent to recover these critical metals from spent Li-ion laptop batteries combined with cathode and anode coatings without adding hydrogen peroxide or other reducing agents. An aqueous acid mixture of 0.15 M in glycolic and 0.35 M in lactic acid showed the highest leaching efficiencies of 100, 100, 100, and 89% for Li, Ni, Mn, and Co, respectively, in an experiment at 120 °C for 6 h. Subsequently, the chelate solution was evaporated to give a mixed metal-hydroxy acid chelate gel. Pyrolysis of the dried chelate gel at 800 °C for 15 h could be used to burn off hydroxy acids, regenerating lithium nickel manganese cobalt oxide, and the novel method presented to avoid the precipitation of metals as hydroxide or carbonates. The Li, Ni, Mn, and Co ratio of regenerated lithium nickel manganese cobalt oxide is comparable to this metal ratio in pyrolyzed electrode coating and showed similar powder X-ray diffractograms, suggesting the suitability of α-hydroxy carboxylic acid mixtures as leaching agents and ligands in regeneration of mixed metal oxide via pyrolysis of the dried chelate gel.

Electrochemistry↗
DOE OSTI2024

An overview of various critical aspects of low-cobalt/cobalt-free Li-ion battery cathodes

Cathodes of lithium-ion batteries (LIBs) significantly impact the environmental footprint, cost, and energy performance of the battery-pack. Hence, sustainable production of Li-ion battery cathodes is critically required for ensuring cost-effectiveness, environmental benignity, consumer friendliness, and social justice. Battery chemistry largely determines individual cell performance as well as the battery pack cost and life cycle greenhouse gas emission. Continuous manufacturing platforms improve production efficiency in terms of product yield, quality and cost. Spent-battery recycling ensures the circular economy of critical elements that are required for cathode production. Innovations in fast-charging LIBs are particularly promising for sustainable e-mobility with a reduced carbon footprint. This article provides an overview of these research directions, emphasizing strategies for low-cobalt cathode development, recycling processes, continuous production and improvement in fast-charging capability.

25 ENERGY STORAGE↗
DOE OSTI2025

Iridium-cobalt oxide synthesized via surfactant-assisted Adams fusion for efficient oxygen evolution in acidic and alkaline media

A series of iridium-cobalt (Ir-Co) oxide catalysts were synthesized using a modified surfactant-assisted Adams fusion method and evaluated for the oxygen evolution reaction (OER) in both acidic and alkaline media. The effect of varying the Ir/Co ratio was systematically studied and compared with commercial Ir black and pure IrO 2 samples. The actual elemental ratios were quantified using X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDS), and inductively coupled plasma-mass spectrometry (ICP-MS). Among the synthesized samples, the Ir 6 Co 4 catalyst exhibited the best performance in acidic media, achieving an iR-corrected overpotential of 292 mV. In alkaline conditions, it demonstrated comparable activity to Ir black, with an iR-corrected overpotential of 263 mV. XPS and electron energy loss spectroscopy analyses revealed that increasing Co content led to a higher fraction of metallic Ir (Ir 0 ) in the catalyst. In addition, the role of Ir 3+ in enhancing OER activity was explored. A strong correlation was observed between higher Ir 3+ content and improved OER performance in acidic conditions.

Adams fusion↗
DOE OSTI2026

Cobalt-free and high-rate stable 5V lithium nickel manganese oxide spinel cathodes enabled via surface oxygen vacancies

Spinel LiNi 0.5 Mn 1.5 O 4 offers both the high-rate, low-cost and safety advantages of LiFePO 4 and the high energy density of LiNiₓMnᵧCo₁₋ₓ₋ᵧO₂ and LiNiₓCoᵧAlzO₂ cathodes. However, the large operating voltage of these materials induces electrolyte oxidation, which degrades the interface and drives Mn dissolution. These reactions are further exacerbated at high rates due to temperature rise. In this study, we discover that ammoniacal treatment followed by annealing introduces a high density of oxygen vacancies in the “near-surface region” of LiNi 0.5 Mn 1.5 O 4 particles. These vacancies release electrons changing the oxidation state of Mn and suppressing its tendency to oxidize the electrolyte. Further, these vacancies enhance the electrode’s electronic conductivity (by ∼3-fold) and Li + diffusivity (by ∼2-fold) greatly improving charge transport, especially when operated at high rates. This results in an across-the-board improvement in self-discharge, specific capacity, energy density, rate capability, coulombic efficiency and cycling stability. When cycled at ∼200 mA g −1 , the capacity fade averaged over 3000 cycles for the surface vacancy-enriched material is ∼0.0167% per cycle compared to an order of magnitude higher fade rate for the baseline material. In conclusion, these findings reveal the potential of targeted surface oxygen vacancy doping to develop cobalt-free and high energy density cathodes that tolerate fast charging and deliver improved cycle life.

Cobalt-free cathodes↗
DOE OSTI2025

Active Sites in the Dealuminated Beta Zeolite-Supported Cobalt Catalyst for Non-Oxidative Ethane Dehydrogenation

Dispersed metal species in siliceous zeolites have been actively studied for non-oxidative dehydrogenation of ethane (NDE). Fundamental insights into the dynamics of metal species in zeolites under reaction conditions have rarely been explored. Herein, we report an atomic level understanding of the dynamics and activity of cobalt (Co) sites in dealuminated Beta zeolite (DeAl-BEA) for NDE during induction and reaction conditions with extensive characterization techniques such as diffuse reflectance UV–vis, solid state nuclear magnetic resonance and X-ray photoelectron, X-ray diffraction along with in situ Fourier transform infrared and X-ray absorption spectroscopy. For a catalyst with 0.5 mass % Co loading, tetrahedral Co 2+ mononuclear sites, di-coordinated to the zeolite framework and with two silanol groups in vicinity (i.e., (≡SiO) 2 Co(HO–Si≡) 2 ), form upon exposure to hydrogen during induction and persist through the NDE reaction. Increasing the Co loading to 3.0 mass % yielded Co sites with similar electronic and coordination structures but slightly elongated Co–O bonds. Upon cooling to room temperature, the Co sites persisted in the same coordination environment, though the disappearance of a feature in the Co K-edge near-edge region revealed changes in the active site’s electronic structure coinciding with modest shifts in bond lengths. The electronic structure and activity of (≡SiO) 2 Co(HO–Si≡) 2 sites were studied comparatively to a few other hypothetical Co 2+ coordination structures, using electronic structure calculations and microkinetic simulations. The simulations showed that NDE is controlled by β-hydride elimination following C–H bond activation and that Co-sites possessing flexibility because of neighboring silanol defects are more active. Interestingly, dinuclear Co–O–Co sites (i.e., (≡SiO)Co(HO–Si≡) 2 –O–(HO–Si≡) 2 Co(≡SiO)) were more active than the mononuclear (≡SiO) 2 Co(HO–Si≡) 2 sites because of favorable hydrogen bonding with the vicinal silanol groups. In conclusion, the present study bridges the gap between the knowledge acquired by ex-situ characterizations and the active sites under the reaction conditions in alkane dehydrogenation chemistry.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Voltage and temperature effects on low cobalt lithium-ion battery cathode degradation

Degradation of low cobalt lithium-ion cathodes was tested using a full factorial combination of upper cut-off voltage (4.0 V and 4.3 V vs. Li/Li + ) and operating temperature (25 °C and 60 °C). Half-cell batteries were analyzed with electrochemical and microstructural characterization methods. Electrochemical performance was assessed with galvanostatic cycling, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) supported by distribution of relaxation times (DRT) analysis. Electrode microstructure was characterized with scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray absorption near edge structure (XANES) imaging. Higher cut-off voltage cycling shows presence of NiO x formation, a low diffusivity rock-salt phase, in both CV and XRD data. XRD patterns confirmed that the rock-salt phase was beginning to form at the low cut-off voltage at high temperature, but in much lower intensity than at the high cut-off voltage. Higher temperature accelerates degradation processes at both voltages. Degradation factors at high temperature include NiO x formation, cathode material dissolution, and electrolyte decomposition. SEM analysis suggests that supporting phases may isolate and disconnect active material particles reducing capacity retention and battery life cycle. DRT analysis and XANES imaging show that both high temperature samples revealed a NiO x phase based on an increased diffusive impedance and a visible shift in the XANES spectra. The low cut-off voltage, high temperature sample showed a split peak and shift to lower energies indicating early formation of the NiO x phase. The diffusive impedance, which hinders intercalation and deintercalation, is driven by the formation of the NiO x phase. While primarily driven by cut-off voltage, elevated temperature also contributes to this degradation mechanism.

electrochemical impedance spectroscopy↗