Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Catalytic reactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Influence of Domain Size and Support Composition on the Reducibility of SiO 2 and TiO 2 Supported Tungsten Oxide Clusters

Supported tungsten oxides are widely used in a variety of catalytic reactions. Depending on the support, the cluster size, oxidation state, reducibility and speciation of the tungsten oxides can widely differ. When promoted with a platinum group metal, the resulting spillover of hydrogen may facilitate the reduction of supported tungsten oxide species, depending on the support. High resolution scanning transmission electron microscopy imaging showed nanometer scale WO x clusters were synthesized on SiO 2 whereas highly dispersed species were formed on TiO 2 . Results from H 2 -temperature-programmed reduction showed the presence of Pd lowered the initial reduction temperature of SiO 2 -supported WO x species but interestingly did not affect that of TiO 2 -supported WO x . X-ray photoelectron and absorption spectroscopies showed the W atoms in SiO 2 -supported WO x species reduce from a +6 oxidation state to primarily +5 after thermal treatment in 5% H 2 , while the fraction of W in the +5 oxidation state was relatively unaffected by reduction treatment of TiO 2 -supported WO x . The unusual behavior of TiO 2 -supported WO x was explained by quantum chemical calculations that reveal the lack of change in the oxidation state of W is attributed to charge delocalization on the surface atoms of the titania support, which does not occur on silica. Moreover, modeling results at <600 K in the presence of H 2 suggest the formation of Brønsted acid sites, and the absence of Lewis acid sites, on larger aggregates of WO x on silica and all cluster sizes on titania. These results provide experimental and theoretical insights into the nature of supported tungsten oxide clusters under conditions relevant to various catalytic reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

CO oxidation over a ligand coordinated single site Rh catalyst: identification of the active complex

Single atom catalysis has evolved as a promising strategy to enhance atom utilization efficiency, lower reaction temperatures, and control reaction pathways in heterogeneous catalytic reactions. An important challenge using supported single atom catalysts is the stability of metal single atoms during reactions. Here, we present an approach to stabilize single rhodium atoms on a titania support via a metal–ligand coordination strategy. We explore the reaction activity and mechanism of CO oxidation, as well as the stability under oxidative reaction conditions. Kinetic studies suggest that, with an excess of oxygen in the feed gas, oxygen activation is more facile on defective titania surfaces than on pristine titania surfaces. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis shows that on the pristine titania surface, the 1,10-phenanthroline-5,6-dione (PDO) coordinated Rh catalyst (Rh–PDO/TiO 2 ) catalyzes CO oxidation via the formation of carbonate-like species, which is similar to what occurs on Rh nanoparticle catalysts. However, on the defective titania surface, no carbonate species form for Rh–PDO/def-TiO 2 . The supported Rh–ligand catalysts are also shown to be very stable in such a reaction environment at elevated temperatures, potentially allowing for wide applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1983

Systems analysis of electricity production from coal using fuel cells

Gasifiers, heat transfer, gas stability, quench, water-gas shift reaction, reforming-methanation, other catalytic reactions, compressors and expanders, acid-gas removal, the fuel cell, and catalytic combustors are described. System pressure drops, efficiency of rotating power equipment, heat exchangers, chemical reactions, steam systems, and the fuel cell subsystems are discussed.

Fleming, D. K.↗
NASA NTRS1975

Formation of nucleoside 5'-polyphosphates from nucleotides and trimetaphosphate

Nucleoside 5'-polyphosphates (N5PP) formed when solutions of nucleoside 5'-phosphates (N5P) and trimetaphosphate (TMP) are dessicated at room temperature are studied by paper chromatography, electrophoresis, and metal catalytic reactions. Divalent Mg ion exhibited superior catalytic function to other divalent metal ions in the reaction. Major reaction products are indicated. The importance of the N5PP series, TMP, and N5-triphosphate as substrates of RNA and DNA synthesis, and under postulated prebiotic conditions likely to obtain during prebiological ages of the earth, is emphasized and discussed. Alternate drying and wetting, evaporation from a prebiotic puddle, concentration of solubles in the remaining liquid phase, metal catalysis, and the role of these substances in the formation of amino acids and long-chain polyphosphates are considered.

Lohrmann, R.↗
DOE OSTI2024

Hydrogenation Reactions with Heterobimetallic Complexes

Abstract Hydrogenations are fundamentally and industrially important reactions that are atom economical paths to synthesize value‐added products from feedstock chemicals. The cooperative effects of two or more metal centers in multimetallic active sites is a successful strategy to activate small molecules and facilitate catalytic reactions, and this strategy has been recently applied to catalytic hydrogenation reactions. Furthermore, heterobimetallic complexes have been well‐documented to provide novel reaction pathways and improved selectivity, compared to their homo‐bimetallic and monometallic analogues. This minireview provides a historical perspective on the development of heterobimetallic catalysts for the hydrogenation of unsaturated substrates and describes recent developments in this burgeoning research area.

Abhyankar, Preshit C.↗
DOE OSTI2024

Hydrogenation Reactions with Heterobimetallic Complexes

Hydrogenations are fundamentally and industrially important reactions that are atom economical paths to synthesize value‐added products from feedstock chemicals. The cooperative effects of two or more metal centers in multimetallic active sites is a successful strategy to activate small molecules and facilitate catalytic reactions, and this strategy has been recently applied to catalytic hydrogenation reactions. Furthermore, heterobimetallic complexes have been well‐documented to provide novel reaction pathways and improved selectivity, compared to their homo‐bimetallic and monometallic analogues. This minireview provides a historical perspective on the development of heterobimetallic catalysts for the hydrogenation of unsaturated substrates and describes recent developments in this burgeoning research area.

catalysis↗
DOE OSTI2024

Unraveling the adsorption-limited hydrogen oxidation reaction at palladium surface via in situ electron microscopy

Palladium (Pd) catalysts have been extensively studied for the direct synthesis of H 2 O through the hydrogen oxidation reaction at ambient conditions. This heterogeneous catalytic reaction not only holds considerable practical significance but also serves as a classical model for investigating fundamental mechanisms, including adsorption and reactions between adsorbates. Nonetheless, the governing mechanisms and kinetics of its intermediate reaction stages under varying gas conditions remain elusive. This is attributed to the intricate interplay between adsorption, atomic diffusion, and concurrent phase transformation of catalyst. Herein, the Pd-catalyzed, water-forming hydrogen oxidation is studied in situ, to investigate intermediate reaction stages via gas cell transmission electron microscopy. The dynamic behaviors of water generation, associated with reversible palladium hydride formation, are captured in real time with a nanoscale spatial resolution. Our findings suggest that the hydrogen oxidation rate catalyzed by Pd is significantly affected by the sequence in which gases are introduced. Through direct evidence of electron diffraction and density functional theory calculation, we demonstrate that the hydrogen oxidation rate is limited by precursors’ adsorption. These nanoscale insights help identify the optimal reaction conditions for Pd-catalyzed hydrogen oxidation, which has substantial implications for water production technologies. The developed understanding also advocates a broader exploration of analogous mechanisms in other metal-catalyzed reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1994

Exobiology experiments for Earth-orbital platforms

Low-gravity (microgravity) studies relevant to prebiotic evolution and the history of the biogenic elements (C, H, N, O, P, S) are particularly suited to orbital platforms. Relevant to these topics are phenomena such as gas-particle interactions (e.g., formation of organic aerosols via photolytic reactions) including nucleation, condensation, evaporation, adsorption, and catalytic reactions on surfaces; and, small-particle or grain interactions (e.g., growth of interstellar dust particles and planetesimals) including processes such as aggregation (or coagulation), scavenging, and collisions. Both gas-particle and grain (i.e., dust, crystals, organic aerosols, etc.) interactions studies can benefit from microgravity and are pertinent to studies in the areas of chemical evolution in the solar nebula, the interstellar medium, and planetary atmospheres; growth of planetesimals; and prebiotic evolution. In general, the microgravity environment allows for long duration and controlled simulations of processes occurring in exobiologically significant systems such as Titan's atmosphere, interstellar dust clouds, and the solar nebula in which gas-particle or particle-particle interactions play a significant role.

Huntington, J. L.↗
DOE OSTI2025

Autonomous Flow Electrochemistry for Accelerated Catalyst Discovery

Our objective is to develop an Autonomous Chemical Experimentation (ACE) platform that accelerates discovery of new catalytic transformations and other energy-relevant chemical reactions and processes. We intentionally designed ACE to be highly modular, both with respect to its rapid deployment to different chemistries and experimental workflows as well as incorporation of a wide range of different AI algorithms. In addition to the development of the core software architecture, initial efforts were made to incorporate Large Language Models to provide human-interpretable reasoning of the optimizer’s actions, and to develop a user-friendly graphical interface for experimental researchers. ACE was demonstrated using a flow electrocatalysis platform containing an inline FTIR spectrometer for real-time analysis and quantification of the reaction outcome. Human-in-the-loop experiments were performed in which a human researcher conducted an experiment using electrode potentials suggested by ACE, then fed the spectral data back to ACE for decision making. After confirming the successful function of the optimizer, efforts were next directed to automation of the hardware and performed full autonomy tests using three reactions: catalytic oxidation of formate, catalytic oxidation of cyclohexanol, and oxidation of hydroquinone. These studies confirm that ACE can close the loop between reaction execution, analysis, and optimization. They also reveal that more improved product detection methods will be essential for ACE to make well-informed decisions for reactions with low conversions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Insight into the Competitive Adsorption Behavior of Polymer Chains in Silica Nanopores by Small-Angle Neutron Scattering

Processive hydrogenolysis catalysts, in which a metal nanoparticle (e.g., Pt) embedded at the bottom of a cylindrical silica nanopore can repeatedly cleave polymer chains and produce value-added hydrocarbon products, offer a potential solution for billions of tons of waste plastics. As the chain stays longer near the Pt catalysts, it would have a higher chance of getting cut, and therefore the molecular weight distribution of the product could be affected by the adsorption behavior of virgin chains (long polymers) versus cleaved chains (short polymers) into the nanopores. Further, this work reports a model study to understand the competitive adsorption behavior of the two different molecular weight polymers that are mixed, mimicking the reaction medium in the intermediate stage of the catalytic reaction. This study employs small-angle neutron scattering (SANS), which takes advantage of contrast differences between hydrogenous and deuterated polystyrenes to experimentally observe the relative composition of the two polymers in the silica nanopores. Our results reveal preferential adsorption of longer chains in the silica nanopores, which is consistent with the theoretical prediction in the literature for the case of the enthalpic attraction between polymers and pore walls.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2004

Organics on Fe-Silicate Grains: Potential Mimicry of Meteoritic Processes?

Currently, it is unknown what exact process or combination of processes produced organics that are found in meteorites or are detected in comets and nebulas. One particular process that forms organics involves Fischer-Tropsch type (FTT) reactions. Fischer-Tropsch type reactions produce hydrocarbons by hydrogenating carbon monoxide via catalytic reactions. The overall reaction is shown. The products of these reactions have been studied using natural catalysts and calculations of the efficiency of FTT synthesis in the Solar Nebula suggest that these types of reactions could make significant contributions to the composition of material near three AU. We use FTT synthesis to coat amorphous Fesilicate grains with organic material to simulate the chemistry in the early Solar Nebula. We used lab-synthesized amorphous Fe-silicate grains for the catalyst because they might better simulate the starting materials found in protostellar nebulas. A brief description of the synthesis of these grains is given in Experiments. This work is different from previous studies because we focus here on the carbonaceous material deposited on the grains. In our experiments, we roughly simulate a model of the nebular environment where grains are successively transported from hot to cold regions of the nebula. In other words, the starting cold regions of the nebula. In other words, the starting gases and FTT products are continuously circulated through the grains at high temperature with intervals of cooling. Overall, organics generated in this manner could represent the carbonaceous material incorporated into comets and meteorites. We present the analyses of the organics produced using pyrolysis gas chromatography mass spectrometry (GCMS) and compare the results with those organics found in the Murchison meteorite.

Johnson, N. M.↗
DOE OSTI2025

Elucidating the Role of Electric Fields in Fe Oxidation via an Environmental Atom Probe

Abstract We quantify the effects of intensely applied electric fields on the Fe oxidation mechanism. The specimen are pristine Fe single crystals exposing a variety of surface structures identified by field ion microscopy. These crystals are simultaneously exposed to low pressures of pure oxygen gas, on the order of 10 −7 mbar, while applying intense electric fields on their surface of several tens of volts per nanometer. The local composition of the different surface structures is probed directly and in real time using an Environmental Atom Probe and successfully compared with first principles‐based models. We found that rough Fe{244} and Fe{112} facets are more reactive toward oxygen than compact Fe{024} and Fe{011} facets. Results demonstrate that the influence of an electric field on the oxidation kinetics depends on the timescales that are involved as the system evolves toward equilibrium. The initial oxidation kinetics show that strong increases in electric fields facilitate the formation of an oxide. However, as one approaches equilibrium, high field values mitigate this formation. Ultimately, this study elucidates how high externally applied electric fields can be used to dynamically exploit reaction dynamics at the nanoscale towards desired products in a catalytic reaction at mild reaction conditions.

Lambeets, Sten V. [Physical and Computational Scie↗
DOE OSTI2025

Elucidating the Role of Electric Fields in Fe Oxidation via an Environmental Atom Probe

We quantify the effects of intensely applied electric fields on the Fe oxidation mechanism. The specimen are pristine Fe single crystals exposing a variety of surface structures identified by field ion microscopy. These crystals are simultaneously exposed to low pressures of pure oxygen gas, on the order of 10 −7 mbar, while applying intense electric fields on their surface of several tens of volts per nanometer. The local composition of the different surface structures is probed directly and in real time using an Environmental Atom Probe and successfully compared with first principles-based models. We found that rough Fe{244} and Fe{112} facets are more reactive toward oxygen than compact Fe{024} and Fe{011} facets. Results demonstrate that the influence of an electric field on the oxidation kinetics depends on the timescales that are involved as the system evolves toward equilibrium. The initial oxidation kinetics show that strong increases in electric fields facilitate the formation of an oxide. However, as one approaches equilibrium, high field values mitigate this formation. Ultimately, this study elucidates how high externally applied electric fields can be used to dynamically exploit reaction dynamics at the nanoscale towards desired products in a catalytic reaction at mild reaction conditions.

09 BIOMASS FUELS↗
NASA NTRS2007

Catalytic Ignition and Upstream Reaction Propagation in a Platinum Tube

A challenge for catalytic combustion in monolithic reactors at elevated temperatures is the start-up or "light-off" from a cold initial condition. In this work, we demonstrate a concept called "back-end catalytic ignition that potentially can be utilized in the light-off of catalytic monoliths. An external downstream flame or Joule heating raises the temperature of a small portion of the catalyst near the outlet initiating a localized catalytic reaction that propagates upstream heating the entire channel. This work uses a transient numerical model to demonstrate "back-end" ignition within a single channel which can characterize the overall performance of a monolith. The paper presents comparisons to an experiment using a single non-adiabatic channel but the concept can be extended to the adiabatic monolith case. In the model, the time scales associated with solid heat-up are typically several orders of magnitude larger than the gas-phase and chemical kinetic time-scales. Therefore, the model assumes a quasi-steady gas-phase with respect to a transient solid. The gas phase is one-dimensional. Appropriate correlations, however, account for heat and mass transfer in a direction perpendicular to the flow. The thermally-thin solid includes axial conduction. The gas phase, however, does not include axial conduction due to the high Peclet number flows. The model includes both detailed gas-phase and catalytic surface reactions. The experiment utilizes a pure platinum circular channel oriented horizontally though which a CO/O2 mixture (equivalence ratios ranging from 0.6 to 0.9) flows at 2 m/s.

Struk, P. M.↗
DOE OSTI2025

Redistribution of Ru in Fe 2 O 3 –Ru Nanocatalysts through an Oxidative Pretreatment Improves Reverse Water–Gas Shift Activity

We have synthesized Fe–Ru nanoparticles via a solvothermal method to create catalysts for the reverse water–gas shift reaction and demonstrated the impact of reductive and oxidative pretreatments on both catalytic performance and structure. Catalytic testing showed improved activity after exposure to O 2 at 600 °C. In contrast, the activity became lower if then exposed to H 2 at 600 °C. Environmental scanning transmission electron microscopy and scanning electron microscopy showed that exposure to O 2 at 600 °C changes the morphology and completely oxidizes Fe into Fe 2 O 3 . Exposure to H 2 at elevated temperature caused Ru coalescence at the surface of the nanoparticle, forming clusters which decreased the optimization of Ru. Reoxidation of the particles exposed to H 2 , however, caused a redistribution of Ru that appears beneficial in maximizing Ru exposure and synergy with Fe oxide, with no major changes in the morphology and oxide structure. Furthermore, our diagnostics demonstrate the complex and reversible rearrangements possible in these multicomponent particles and the benefits of oxidative pretreatment to enhance or regenerate Fe–Ru catalysts in other important catalytic reactions such as Fischer–Tropsch synthesis.

Fe−Ru nanoparticles↗
DOE OSTI2025

In-situ probing of the Fischer-Tropsch reaction on Co single crystal surfaces up to 1 bar

The surface chemistry of the Fischer-Tropsch catalytic reaction over Co has still several unknows. Here, we report an in-situ X-ray photoelectron spectroscopy study of Co$(0001)$ and Co$(10\bar{1}4)$, and in-situ high energy surface X-ray diffraction of Co$(0001)$ during the Fischer-Tropsch reaction at 0.15 bar - 1 bar and 406 K - 548 K in a H 2 /CO gas mixture. We find that these Co surfaces remain metallic under all conditions and that the coverage of chemisorbed species ranges from 0.4–1.7 monolayers depending on pressure and temperature. The adsorbates include CO on-top, C/-C x H y and various longer hydrocarbon molecules, indicating a rate-limiting direct CO dissociation pathway and that only hydrocarbon species participate in the chain growth. The accumulation of hydrocarbon species points to the termination step being rate-limiting also. Furthermore, we demonstrate that the intermediate surface species are highly dynamic, appearing and disappearing with time delays after rapid changes in the reactants’ composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1987

Reaction rate oscillations during catalytic CO oxidation: A brief overview

It is not the intent here to present a comprehensive review of the dynamic behavior of the catalytic oxidation of CO. This reaction is one of the most widely studied in the field of catalysis. A review paper by Engel and Ertl has examined the basic kinetic and mechanistic aspects, and a comprehensive paper by Razon and Schmitz was recently devoted to its dynamic behavior. Those interested in further study of the subject should consult these reviews and a number of general review papers on catalytic reaction dynamics. The goal is to present a brief overview of certain interesting aspects of the dynamic behavior of this reaction and to discuss a few questions and issues, which are still the subject of study and debate.

Tsotsis, T. T.↗
DOE OSTI2025

Size‐Controlled Cobalt Nanoplates and Their Impact on Oxygen Evolution Catalysis

Controlling the size of nanoparticles is important in catalytic reactions, not only for tuning the surface area but also for modifying the electronic structure. However, achieving precise size control in 2D structures remains challenging. In this work, we demonstrate precise size control of cobalt nanoplates, ranging from 19 nm to 80 nm, which is achieved by tuning the ratio of two surfactants used in the synthesis. The 19 nm of Co nanoplates exhibit higher oxygen evolution reaction activity due to a higher proportion of {10$\overline{1}$1} to {0001} facets. In conclusion, this size control allows systematic investigation into how nanoplate dimensions influence catalytic performance in the oxygen evolution reaction, offering new insights into structure-activity relationships of cobalt nanocatalysts.

defect↗