Glycosyl residue composition and total carbohydrate of cell wall extracts from WT and PdGAUT4-KD lines
Glycosyl residue composition and total carbohydrate of cell wall extracts from WT and PdGAUT4-KD lines
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Glycosyl residue composition and total carbohydrate of cell wall extracts from WT and PdGAUT4-KD lines
Synthesis of carbohydrates from the carbon dioxide and water present in a closed circuit respiratory system traveling through space
Over hundreds of PDB structures of protein–sugar complexes, our work demonstrates the prevalence of CH–π stacking interactions, and energetic analysis shows that numerous orientations allow for highly favorable interaction strengths.
Climate uncertainty is intensifying the need for greater plasticity in carbohydrate reserve utilization to support winter survival and spring growth in woody perennials. In poplar, the single-copy SUT4, which encodes a tonoplast-localized sucrose transporter, and the SUT5/SUT6 genome duplicates, which encode plasma membrane-localized transporters, are expressed year-round, with SUT4 showing the highest expression during cool seasons. Given its role in vacuolar sucrose efflux and winter-predominant expression, SUT4 may play a key role in modulating seasonal carbohydrate dynamics. While SUT4-knockdown and knockout effects have been studied under greenhouse conditions, their impact under field conditions remains unexplored. Here, we report a field-based study comparing CRISPR knockout mutants of winter-expressed SUT4 and SUT5/SUT6 in Populus tremula x alba. We show that sut4, but not sut5/6, mutants exhibited earlier autumn leaf senescence, delayed spring bud flush, reduced stem growth, and altered sugar partitioning in winter xylem and bark relative to controls. After 2 years in the field, all genotypes flowered before leaf flush in early spring; however, sut4 mutants produced sterile ovules despite developing normal-looking catkins. Metabolic profiling revealed disrupted sucrose and raffinose dynamics in elongating sut4 catkins. This was accompanied by transcriptomic signatures of elevated stress and downregulation of proanthocyanidin biosynthesis and circadian clock genes. These findings highlight the critical role of SUT4 in coordinating sugar allocation, stress responses, and seasonal development in poplar.
Correction to: Nature Communicationshttps://doi.org/10.1038/s41467-024-53784-3, published online 4 November 2024 In the version of this article initially published, Table 1 did not include the properties of the taxa being proposed or refer directly to another location in the main manuscript describing the properties. As such, the original manuscript did not comply with Rule 27 (2)(c) of the ICNP. Also, Table 1 listed the order Fervidibacterales as the nomenclatural type for the class Fervidibacteria, which violates latest emended version of Rule 15 stating that the nomenclatural type for a class must be a genus. Below we provide a modification of Table 1 containing protologues with these errors corrected. We have also changed the order of the taxa in the table to meet the most common ordering. (Table presented.) Taxon names proposed under the ICNP Proposed taxon Etymology Description Genus Fervidibacter Fer.vi.di.bac’ter. L. masc. adj. fervidus, hot, steaming; N.L. masc. n. bacter, a rod; N.L. masc. n. Fervidibacter, a hot rod Thermophilic or hyperthermophilic inhabitants of freshwater thermal environments. All members are likely polysaccharide-degrading chemoheterotrophs with numerous carbohydrate-active enzymes encoded in their genomes. Aerobic, with high-affinity and/or low-affinity terminal oxidases present in the genomes. The oxidative pentose phosphate pathway and the tricarboxylic acid cycle are complete in genomes belonging to the genus. Gram-stain-negative and diderm cell envelope structure. Ovoid- to rod-shaped morphology. Spores are not formed. The genus is a distinct phylogenetic lineage in the family Fervidibacteraceae, the order Fervidibacterales, and the class Fervidibacteria in the phylum Armatimonadota. The type species is Fervidibacter sacchariT. Species Fervidibacter sacchari sac’cha.ri. N.L. gen. n. sacchari, of sugar Hyperthermophilic, microaerophilic, facultatively anaerobic, and grows chemoheterotrophically on monosaccharides and polysaccharides. Cells are ovoid- to rod-shaped, Gram-stain negative, and are 0.9–1.3 µm in width and 1.6–3.6 µm in length. Grows between 65 and 87.5 °C and an optimum temperature of 80 °C, and a pH range of 6.5–8.6 with an optimum pH of 7.5. Grows at an optimum O2 concentration of 5–10%. Grows on D-arabinose, D-galactose, D-glucose, D-rhamnose, D-ribose, D-xylose, chondroitin sulfate, colloidal chitin, galactan, gellan gum, guar gum, karaya gum, locust bean gum, xantham gum, xyloglucan, β-glucan, glycogen, starch, AFEX-pretreated corn stover, miscanthus, sugarcane bagasse, acetate and casamino acids. Grows weakly on xyloglucan under fermentation conditions. The major fatty acids (>10%) are C16:0, C18:0 and/or cyclo-C17:0, and iso-C16:0. The major respiratory quinones (>10%) are MK-8 and MK-9. The isolate and genomes of the species have been recovered from geothermal springs in the Great Basin, Nevada, USA. GC content of genomes range between 51–52%. Subunits for both the high-affinity and low-affinity terminal oxidases are encoded in the genomes. Genomes also encode a Group 3d [NiFe] hydrogenase, which produces hydrogen as an electron sink for NAD+ regeneration. The type strain PD1T (= JCM 39283T = DSM 113467T) was isolated from Great Boiling Spring in Nevada, USA. Family Fervidibacteraceae Fer.vi.di.bac.te.ra’ce.ae. N.L. masc. n. Fervidibacter type genus of the family; L. suff. -aceae ending to denote a family; N.L. fem. pl. n. Fervidibacteraceae the family of the genus Fervidibacter Thermophilic or hyperthermophilic inhabitants of freshwater thermal environments. All members are likely polysaccharide-degrading chemoheterotrophs with numerous carbohydrate-active enzymes encoded in their genomes. Aerobic, with high-affinity and/or low-affinity terminal oxidases present in the genomes. The oxidative pentose phosphate pathway and the tricarboxylic acid cycle are complete in genomes belonging to the family. The family is a distinct phylogenetic lineage in the order Fervidibacterales and the class Fervidibacteria in the phylum Armatimonadota. The type genus is Fervidibacter. Order Fervidibacterales Fer.vi.di.bac.te.ra’les. N.L. masc. n. Fervidibacter type genus of the order; L. suff. -ales ending to denote an order; N.L. fem. pl. n. Fervidibacterales the order of the genus Fervidibacter Thermophilic or hyperthermophilic inhabitants of freshwater thermal environments. All members are likely polysaccharide-degrading chemoheterotrophs with numerous carbohydrate-active enzymes encoded in their genomes. Aerobic or strictly anaerobic. Phylogenomic placement of this lineage within the Fervidibacteria and relative evolutionary divergence supports delineation of this lineage as an order within the class Fervidibacteria and phylum Armatimonadota. The type genus is Fervidibacter. Class Fervidibacteria Fer.vi.di.bac.te’ri.a. N.L. masc. n. Fervidibacter type genus of the type order of the class; L. suff. -ia ending to denote a class; N.L. neut. pl. n. Fervidibacteria the class of the order Fervidibacterales Thermophilic or hyperthermophilic inhabitants of freshwater thermal environments. All members are likely polysaccharide-degrading chemoheterotrophs with numerous carbohydrate-active enzymes encoded in their genomes. Aerobic or strictly anaerobic. Phylogenomic placement of this lineage within the Armatimonadota and relative evolutionary divergence supports delineation of this lineage as a class within the Armatimonadota. The type genus is Fervidibacter. The error has not been corrected in the PDF or HTML versions of the Article.
Catalytic activation of cellulose ethers occurs via hydroxyl-stabilized cleavage of inter-monomer glycosidic bonds. Cooperativity between two hydroxyl groups lowers the ether cleavage transition state necessary to break apart long carbohydrate chains to initiate small molecule formation as fuel precursors. Metals existing with lignocellulosic materials including alkaline earth metals (Ca 2+ , Mg 2+ ) or alkali (Na + , K + ) also can catalyze ether scission cooperatively. By bonding with carbohydrate hydroxyl groups, a metal cation disrupt the hydrogen bonding network and free carbohydrate functional groups to react; a second metal cation stabilizes the carbohydrate ether transition state and enhances the rate of polymer scission. In this work, we expanded our initial understanding of metal-catalyzed glycoside ether scission. Within polysaccharides such as cellulose, two ether groups exist: one between monomers (glycosidic linkages) and one within a pyran ring. The hydroxyl-group hydrogen bonding network and bound metal ions form low energy binding states that interact with both ether oxygens simultaneously. Based on this interaction, our primary hypothesis was that the competition between stabilizing the two ether scission transition states determines the extent of the major pathways. Metals that disrupt the hydrogen bonding network of the C6 of sugars and stabilize the glycosidic ether promote transglycosylation to levoglucosan; in contrast, metals that stabilize the pyran ether oxygen promote sugar ring fragmentation to furans such as furfural. Varying characteristics of metal cation catalysts and configurations of bound polysaccharide chains dictate the relative rates of ether scission.
To render the resulting biomass more attractive and amenable for utilization as the basis for low-carbon intensity bioproducts, single-celled algae need to be biochemically and metabolically poised to assimilate and store the delivered carbon in the fastest and most efficient manner. Accelerating biochemical carbon storage, as primarily carbohydrates or lipids, is critical to achieve the high carbon capture potential that is assigned to algae. To guide strain optimization and engineering for maximizing carbon capture and storage, it is essential to elucidate the link between carbon metabolism and biomass composition. Most published metabolomics work in algae remains largely restricted to ideal and simplified environmental conditions in model organisms, thereby limiting their translation to outdoor implementation. In this work, we utilize 13 C isotopic labeling to characterize distinct intracellular metabolic fluxes before, during, and after nitrogen depletion-induced compositional shifts in Scenedesmus obliquus UTEX 393. The results indicate that a transition to carbohydrates is characterized by diverting flux to starch instead of replenishing the Calvin cycle for CO 2 fixation whereas the subsequent transition to lipids is fueled by NADPH produced by upregulating the phosphoenolpyruvate carboxylase (PEPC)–malic enzyme (ME) cycle flux. Our work highlights bottlenecks to carbohydrate- and lipid-rich biomass and can guide implementable strategies to control the fate of fixed carbon in S. obliquus.
Glomalin, a substance produced by arbuscular mycorrhizal (AM) fungi, haswell-documented benefits for plant and soil health, including water retention and soil aggre-gation. Glomalin quantification has been performed by enzyme-linked immunosorbent assay(ELISA) using a monoclonal antibody, MAb32B11, that has been described as targeting a heatshock protein 60 (RiHSP60). In this study, we re-examined the molecular nature of the antigen recognized byMAb32B11. MAb32B11 did not cross-react with the RiHSP60 polypeptide. Glomalin extracts of Rhizo-phagus irregularis showed strong and dose-dependent cross-reactivity with MAb32B11 evenwhen protein levels were undetectable, raising doubts about the proteinaceous nature of theantigen. Protease treatments of glomalin extracts did not affect the ELISA signal. However,treatment with periodate, which degrades polysaccharides, significantly reduced the signal. Astrong correlation between carbohydrate content and the ELISA signal was observed in glo-malin extracts. These findings indicate that MAb32B11 recognizes a carbohydrate, likely originating fromcell walls of AM fungi. Further analysis of glomalin extracts using size exclusion chromatogra-phy suggests that the epitope of MAb32B11 is a complex carbohydrate in the size range of511–600 kDa. Understanding the true nature of glomalin will enhance our ability to quantifyit accurately and leverage its agricultural benefits.
The plant secondary cell wall, a complex matrix composed of cellulose, hemicellulose, and lignin, is crucial for the mechanical strength and water-proofing properties of plant tissues, and serves as a primary source of biomass for biorenewable energy and biomaterials. Structural analysis of these polymers and their interactions within the secondary cell wall has been heavily relying on 13 C-based solid-state NMR techniques. In this study, we explore the application of 1 H-detected solid-state NMR techniques for rapid, high-resolution structural characterization of polysaccharides and lignin, demonstrated on the stems of hardwood eucalyptus. We explored the use of synthesized 2D spectra to resolve central 1 H resonances and the combined application of 3D hCCH and hCHH experiments for complete resonance assignment and unambiguous identification of lignin-carbohydrate interactions. Our findings emphasize the central role of acetylated three-fold xylan conformers, rather than two-fold, in stabilizing the carbohydrate-lignin interface, with glucuronic acid sidechains in eucalyptus glucuronoxylan colocalizing with lignin, revised cellulose-lignin interactions involving uncoated microfibril surfaces, and pectin-lignin interactions indicative of early-stage lignification. These results present a novel approach for rapid structural analysis of lignocellulosic biomaterials without the need for solubilization or extraction.
Transforming agricultural waste into biofuels and bioproducts is crucial to advancing a low-carbon bioeconomy. However, the inherent variability in the composition and quality introduces uncertainties in the conversion efficiency and poses challenges in process development. Through integrating a high-throughput conversion system, material characterization techniques, and advanced data analysis tools, this study investigates the variability of corn stover and its subsequent impacts on carbohydrate conversion. The findings reveal that indoor storage substantially reduces the moisture and ash content and soil contamination, while other properties remain largely unchanged. Self-degradation due to microbial activity during storage decreases the carbohydrate content of corn stover but enhances glucose and xylose yields. A negative correlation is observed between sugar yields and lignin content across samples with varying ash and moisture content. The inhibitory effect of lignin diminishes in self-degraded samples likely due to the disrupted cell wall structure. Although self-degradation slightly increases cellulose crystallinity, no strong correlation was observed between the crystallinity and sugar yield. Hot water pretreatment under mild conditions effectively mitigates inherent variability, consistently improving the sugar yield from corn stover by up to 50%. By elucidating the feedstock variability and its impact on convertibility, these findings offer valuable insights into appropriate feedstock handling and management, highlighting potential strategies to address variability challenges.
Glycosyltransferases (GTs) catalyze the formation of glycosidic linkages to produce almost all complex carbohydrates. This project used a multi-disciplinary, high-throughput (HTP) biochemical and computational biology approach focused on duckweed as a model energy crop, to study carbohydrate metabolic processes. To achieve this, developed and carried out out high-throughput (HTP) functional characterization of plant glycosyltransferases (GTs) role of enzymatic microenvironments be assessed through a combined proteomic and computational biology approach, and the combined data was used to populate deep-learning frameworks to predict plant GT function. Functional validation achieved through this research is being used to assign gene function and study plant processes at the systems level to efficiently link the genome sequence with gene function. Together, the combined approaches used within this study provide a foundation for how computational prediction, in combination with high-throughput functional validation, can be used to study plant processes at the systems level and translate knowledge gained to efficiently link genome sequence with gene function in a species agnostic manner.
Anaerobic gut fungi of the phylum Neocallimastigomycota are microbes proficient in valorizing low-cost but difficult-to-breakdown lignocellulosic plant biomass. Characterization of different fungal life stages and how they contribute to biomass breakdown are critical for biotechnological applications, yet we lack foundational knowledge about the transcriptional, metabolic, and enzyme secretion behavior of different life stages of anaerobic gut fungi: zoospores, germlings, immature thalli, and mature zoosporangia. A Miracloth-based technique was developed to enrich cell pellets with zoospores - the free-swimming, flagellated, young life stage of anaerobic gut fungi. By contrast, fungal mats contained relatively more vegetative, encysted, mature sporangia that form films. Global gene expression profiles were compared from two sample types (zoospore-enriched cell pellets vs. mature mats) harvested from the anaerobic gut fungal strain Neocallimastix californiae G1. Despite cultures being grown on glucose, the fungal zoospore-enriched samples were transcriptionally primed to encounter plant matter substrate, as evidenced by upregulation of catabolic carbohydrate-active enzymes and putative carbohydrate transporters. Furthermore, we report significant differential gene expression for gene annotation groups, including putative secondary metabolites and transcription factors. Understanding global gene expression differences between the fungal zoospore-enriched cells and mature fungi aid in characterizing fungal development, unmasking gene function, and guiding cultivation conditions and engineering targets to promote enzyme secretion.
As the most accessible and abundant renewable resource on earth, lignocellulosic biomass mainly consists of cellulose, hemicelluloses, and lignin with a small amount of protein, pectin, minerals, and extractives (e.g., tannins, lipids, and resins). Lignocellulosic biomass has gained extensive attention in industry and research owing to its renewability, availability, and low cost. However, achieving efficient fractionation of lignocellulose components and all-component utilization in a green and cost-effective manner remains a challenge dueto biomass recalcitrance. Deep eutectic solvents (DESs) have received considerable attention because they are biocompatible, inexpensive, biodegradable, have low toxicity, and are easy to prepare and recycle; these characteristics strongly depend on individual components involved in DESs preparation. This review systematically summarizes recent progress in the fractionation of carbohydrates (cellulose and hemicelluloses) and lignin from biomass using DESs, with particular emphasis on the effects of DES types and pretreatment parameters on fractionation efficiency. The subsequent conversion and upgrading of the DES-fractionated products (i.e., carbohydrates and lignin) are comprehensively analyzed. Finally, the challenges and future prospects of lignocellulose biomass fractionation using DESs are proposed in view of the existing limitations. This review provides an in-depth understanding of lignocellulose biomass fractionation during DESs processing, offering insights to improve current pretreatment methods and/or to explore new pretreatment methods aimed at mitigating the global energy crisis.
Abstract In photosynthetic organisms, light acts as an environmental signal to control their development and physiology, as well as energy source to drive the conversion of CO 2 into carbohydrates used for growth or storage. The main storage carbohydrate in green algae is starch, which accumulates during the day and is broken down at night to meet cellular energy demands. The signaling role of light quality in the regulation of starch accumulation remains unexplored. Here, we identify PHOTOTROPIN-MEDIATED SIGNALING KINASE 1 (PMSK1) as a key regulator of starch metabolism inChlamydomonas reinhardtii. In its phosphorylated form (PMSK1-P), it activates GLYCERALDEHYDE-3-PHOSPHATE DEHYDROGENASE (GAP1), promoting starch biosynthesis. We show that blue light, perceived by PHOTOTROPIN, induces PMSK1 dephosphorylation that in turn represses GAP1 mRNA levels and reduces starch accumulation. These findings reveal a previously uncharacterized blue light-mediated signaling pathway that advances our understanding of photoreceptor-controlled carbon metabolism in microalgae.
Abstract Background Cellulose, an abundant biopolymer, has great potential to be utilized as a renewable fuel feedstock through its enzymatic degradation into soluble sugars followed by sugar fermentation into liquid biofuels. However, crystalline cellulose is highly resistant to hydrolysis, thus industrial-scale production of cellulosic biofuels has been cost-prohibitive to date. Mechanistic studies of enzymes that break down cellulose, called cellulases, are necessary to improve and adapt such biocatalysts for implementation in biofuel production processes. Thermobifida fusca Cel6B ( Tf Cel6B) is a promising candidate for industrial use due to its thermostability and insensitivity to pH changes. However, mechanistic studies probing Tf Cel6B hydrolytic activity have been limited to ensemble-scale measurements. Results We utilized optical tweezers to perform single-molecule, nanometer-scale measurements of enzyme displacement during cellulose hydrolysis by Tf Cel6B. Records featured forward motility on the order of 0.17 nm s −1 interrupted by backward motions and long pauses. Processive run lengths were on the order of 5 nm in both forward and backward directions. Motility records also showed rapid bidirectional displacements greater than 5 nm. Single-enzyme velocity and bulk ensemble activity were assayed on multiple crystalline cellulose allomorphs revealing that the degree of crystallinity and hydrogen bonding have disparate effects on the single-molecule level compared to the bulk scale. Additionally, we isolated and monitored the catalytic domain of Tf Cel6B and observed a reduction in velocity compared to the full-length enzyme that includes the carbohydrate-binding module. Applied force has little impact on enzyme velocity yet it readily facilitates dissociation from cellulose. Preliminary measurements at elevated temperatures indicated enzyme velocity strongly increases with temperature. Conclusions The unexpected motility patterns of Tf Cel6B are likely due to previously unknown mechanisms of processive cellulase motility implicating irregularities in cellulose substrate ultrastructure. While Tf Cel6B is processive, it has low motility at room temperature. Factors that most dramatically impact enzyme velocity are temperature and the presence of its native carbohydrate-binding module and linker. In contrast, substrate ultrastructure and applied force did not greatly impact velocity. These findings motivate further study of Tf Cel6B for its engineering and potential implementation in industrial processes.
Lignocellulolytic enzymes remain one of the primary cost constraints in second-generation (2G) ethanol biorefineries. Achieving efficient hydrolysis of structural carbohydrates with minimal enzyme dosage, maintaining slurry fermentability for industrially relevant ethanol titers, and maximizing ethanol yield per ton of biomass are among the major challenges in 2G processes. In this study, we optimized the dosages of pre-commercial cellulase (NS22257) and hemicellulase (NS22244) on pilot-scale, hydrothermally pretreated lignocellulosic substrates. Enzyme dosages were evaluated at three levels: 20 mg of cellulase with 7.25 mg of hemicellulase (ED-1), 40 mg with 14.5 mg (ED-2), and 60 mg with 21.75 mg (ED-3). As expected, the highest sugar yields were obtained with ED-3; however, for sweet sorghum, oilcane, and miscanthus, sugar yields from ED-2 and ED-3 were not significantly different (p < 0.05). For example, sweet sorghum produced 123.78 ± 1.54 g L−1 and 125.76 ± 0.46 g L−1 of total sugars (glucose and xylose) with ED-2 and ED-3, respectively. Although energycane exhibited a statistically significant difference between ED-2 and ED-3, the incremental gain with ED-3 was modest, increasing sugar release by only 9.02 g L−1 relative to ED-2. Importantly, ED-1 resulted in sugar yields of 88.88 ± 3.64 to 106.86 ± 1.21 g L−1, sufficient to achieve ethanol titers ≥40 g L−1, the threshold required for industrial relevance. A semi-integrated bioprocess validated this outcome, producing 42.09 ± 2.38 g L−1 ethanol and an estimated yield of 213.38 L of ethanol per dry ton of pretreated biomass, requiring only 20.83 L of cellulase and 6.25 L of hemicellulase per ton. Remarkably, these enzyme dosages were approximately tenfold lower than those reported in prior studies.
Oil sorghum (OS) has been developed by engineering grain (TX430) and sweet (Ramada) genetic backgrounds to accumulate triacylglycerols (TAG) in vegetative tissues as an energy-dense feedstock for sustainable aviation fuel (SAF) and other biofuels. This study evaluated two TX430 OS lines (TxHO-2, TxHO-3) and two Ramada OS lines (RmHO-1, RmHO-2) alongside wild-type (WT) lines in NE and IL over 2 years (2023–2024) to quantify genotype × environment effects on agronomic performance and TAG accumulation. Across four environments, TX430 OS lines showed average TAG concentrations of 15.0 g kg−1 in leaves and 12.8 g kg−1 in stems, approximately 19-fold higher than WT. Ramada OS lines accumulated 26.1 g kg−1 in leaves and 12.3 g kg−1 in stems, approximately 25-fold and 13-fold increases over WT, respectively. OS lines in TX430 exhibited an 18% reduction in biomass (8.4 vs. 9.9 Mg ha−1 for WT), while Ramada OS lines had similar WT biomass (18.3 vs. 19.9 Mg ha−1 for WT). Among TX430 OS lines, TxHO-2 achieved the highest TAG yield (190 kg ha−1), while RmHO-1 led the Ramada lines (335 kg ha−1) due to higher biomass and similar TAG concentration. Enhanced TAG accumulation increased N, P, and K removal in TX430 lines but not in Ramada lines. Structural carbohydrate and ash concentration were unaffected. Overall, results confirm vegetative lipid accumulation as a viable strategy for high-biomass sorghum, supporting its potential as a dual-purpose feedstock for SAF. Future work should focus on minimizing biomass yield penalties and improving nutrient use efficiency in oil sorghum systems.