Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CLOSED PLASMA DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Benefits and Challenges of the Use of High-Z Plasma Facing Materials in Fusion Devices

The use of high-Z plasma facing components requires intensive research in all areas, i.e. in plasma wall-interaction, in the physics of the confined plasma, diagnostic, and in material development. Only a few present day divertor tokamaks - mainly Alcator C-Mod and ASDEX Upgrade - gained experience with the refractory metals molybdenum and tungsten, respectively. ASDEX Upgrade was stepwise converted from graphite to tungsten PFCs and in parallel a reduction of the deuterium retention by almost a factor of ten has been observed due to the strong suppression of D co-deposition with carbon. The deuterium retained in W is in line with laboratory results. In order to diagnose W sources and the W content in the main plasma adequate spectroscopic methods had to be developed. As expected from the sputtering threshold of Mo and W, negligible erosion by the thermal divertor background plasma is found in ASDEX Upgrade and Alcator C-Mod under low temperature divertor conditions. However, erosion by fast particles and intrinsic impurities, which additionally might be accelerated in rectified electrical fields observed during ion cyclotron frequency heating, plays an important role. The Mo and W concentrations in the plasma centre are strongly affected by plasma transport and variations up to a factor of 50 are observed for similar influxes. However, it could be demonstrated that sawteeth and turbulent transport driven by central heating can suppress central accumulation. The inward transport of high-Z ions at the edge can be efficiently reduced by 'flushing' the pedestal region caused by frequent edge instabilities. Since with metal walls the edge radiation by low-Z impurities is reduced, it has to be substituted in a pure high-Z device by artificially injected low-Z impurities in order to keep the power load at an acceptable level. Experiments at ASDEX Upgrade suggest that a regime with benign erosion and favourable confinement can be achieved. Extrapolations to ITER and DEMO are difficult since the physics of plasma transport is not yet completely understood, the particle and energy fluxes are orders of magnitude higher and the technical boundary conditions in DEMO strongly differ from those of present day devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ICRF Mode Conversion Studies with Phase Contrast Imaging and Comparisons with Full-Wave Simulations

Waves in the ion cyclotron range of frequencies (ICRF) are widely used to heat toka-mak plasmas. In a multi-ion-species plasma, the FW converts to ion cyclotron waves (ICW) and ion Bernstein waves (IBW) around the ion-ion hybrid resonance (mode conversion). The mode converted wave is of interest as an actuator to optimise plasma performance through flow drive and current drive. Numerical simulations are essential to describe these processes accurately, and it is important that these simulation codes be validated. On Alcator C-Mod, direct measurements of the mode converted waves have been performed using Phase Contrast Imaging (PCI), which measures the line-integrated electron density fluctuations. The results were compared to full-wave simulations AORSA and TORIC. AORSA is coupled to a Fokker-Planck code CQL3D for self-consistent simulation of the wave electric field and the minority distribution function. The simulation results are compared to PCI measurements using synthetic diagnostic. The experiments were performed in D-H and D-{sup 3}He plasmas over a wide range of ion species concentrations. The simulations agreed well with the measurements in the strong absorption regime. However, the measured fluctuation intensity was smaller by 1-2 orders of magnitudes in the weakly abosorbing regime, and a realistic description of the plasma edge including dissipation and antenna geometry may be required in these cases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analyzing the Radiation Properties of High-Z Impurities in High-Temperature Plasmas

Most tokamak-based reactor concepts require the use of noble gases to form either a radiative mantle or divertor to reduce conductive heat exhaust to tolerable levels for plasma facing components. Predicting the power loss necessary from impurity radiation is done using electron temperature-dependent 'cooling-curves' derived from ab initio atomic physics models. We present here a technique to verify such modeling using highly radiative, argon infused discharges on Alcator C-Mod. A novel x-ray crystal imaging spectrometer is used to measure spatially resolved profiles of line-emissivity, constraining impurity transport simulations. Experimental data from soft x-ray diodes, bare AXUV diodes and foil bolometers are used to determine the local emissivity in three overlapping spectral bands, which are quantitatively compared to models. Comparison of broadband measurements show agreement between experiment and modeling in the core, but not over the entire profile, with the differences likely due to errors in the assumed radial impurity transport outside of the core. Comparison of Ar{sup 16+} x-ray line emission modeling to measurements suggests an additional problem with the collisional-radiative modeling of that charge state.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast-ions on Alcator C-Mod: Comparisons between Simulation and Experiment for Equilibrium and Evolving Distributions

Analysis of fast-ion distributions >100 T{sub e} is important for both ITER and a fusion reactor, as both will have a significant population of fusion-born alpha particles. Furthermore, energetic ions may display transport properties that differ from the bulk plasma. It is imperative to benchmark current simulation codes with measurements of highly energetic fast-ions on current devices. Experimental measurements of ICRF heated H-minority plasmas on Alcator C-Mod are performed with an upgraded Compact Neutral Particle Analyzer (CNPA). The CNPA consists of vertically-viewing photodiode detectors with viewing chords from r/a = {approx}0.18 to 0.6 and energies from 150 keV to 1.5 MeV. The CNPA measurements are compared to the output of a synthetic diagnostic that has been added to the Fokker-Planck solver CQL3D. CQL3D is coupled with the full-wave solver AORSA to evolve a self-consistent fast-ion distribution. Good agreement is obtained between simulation and experiment for fast ion distributions that are in steady-state (df/dt = 0). However, there are discrepancies between the experimental and simulated results for the time-dependent evolution of the fast-ion distribution. A possible explanation of the discrepancy is due to violation of certain assumptions of quasi-linear theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Minority Ion Measurements During ICRF Experiments in Alcator C-Mod

ICRF is the primary auxiliary heating in C-Mod where both H or {sup 3}He minority and mode conversion regimes are utilized. For transport analysis, the power deposition profile is critical and measuring the resulting fast ion distribution provides a direct means to constrain and validate ICRF simulations used to calculate power deposition. In mode conversion, measurement of the minority ion density, temperature, and velocity profiles is critical for the wave physics and may provide some insight into the fundamental physics of flow drive. Using active charge exchange, the He{sup +1} 4686A or H 6563A line is observed to find whether fast ion and relevant thermal ion measurements are practical. Results of these experiments yield fast ion and thermal ion measurements in D(He). A new analysis technique to extract information from high noise fast ion spectra is developed. A development path for improved D({sup 3}He) and D(H) is indicated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Studies of Intermittency-like Phenomena in Plasma turbulence at IPR

The observation of intermittency in the turbulent scrape-off layer plasma of ADITYA tokamak was first reported about one and a half decade ago. In the last decade or so, several aspects of intermittency-like phenomena have been observed on tokamaks and other fusion devices throughout the world. A review of the research carried out at the Institute for Plasma Research (IPR) is presented, which closely follow the research trend on intermittency-like phenomena in plasmas worldwide. We also present our analysis of particle flux data in order to test the recently proposed fluctuation theorem, which states that the probability of 'entropy consuming' flux events falls off exponentially with the averaging time. This theorem, proposed in the context of small systems, is applied to macroscopic system like tokamak edge plasma by invoking an 'effective temperature' of the bath of drift waves from which, plasma objects take energy and carry out work of transporting matter

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Temporal limits of a rapidly swept Langmuir probe

The finite, electrostatically achievable, temporal resolution of plasma properties from a turbulent discharge is limited by an array of effects wherein the theory of Langmuir probes breaks down. Formulations for the particle transit time, sheath formation time, plasma-probe resonance, polarization current, sheath capacitance, stray capacitance, and mutual capacitance effects are all evaluated for time-resolved operation of a Langmuir probe. The resulting time scales serve to place a theoretical bound on the maximum rate of a rapidly swept Langmuir probe as analyzed with typical thin-sheath collisionless probe theory. For plasma typical to the plume of a Hall effect thruster [xenon plasma, n{sub e}=(1-1000)x10{sup +15} m{sup -3}, and T{sub e}=1-20 eV], upper limits of 0.01-70 kHz are observed for a noncapacitive compensated Langmuir probe. With a high-speed dual Langmuir probe (HDLP) (a regular probe plus a null compensation probe), the upper probing frequency limits are increased to 0.04-11 MHz limited by sheath capacitance in the far and near field, and polarization effects for closer internal measurements. For a typical tokamak edge plasma (with HDLP), the thermally equilibrated hotter species (typically T{sub e}approx =T{sub i}approx =10 to 20 eV) and lighter ions together lend higher limiting rates of ion transit, sheath formation, and sheath capacitance effects (in excess of 20 MHz), but the fully magnetized plasma complicates the collected probe current, limiting the allowable sweep rate to <1 MHz (for a magnetic field of 2 T). Thus we find that the upper rate of Langmuir probe sweeping is in the low megahertz range for both electric thruster and fusion plasma device diagnostics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear simulation of toroidal Alfven eigenmode with microturbulence-induced radial diffusion

It is shown analytically and numerically that microturbulence-induced diffusivity can affect nonlinear saturation of energetic particle driven modes in the similar way as collisional pitch angle scattering does. Introducing a simple diffusion operator to the code, our numerical results have shown that a single toroidal Alfven eigenmode (TAE) can saturate at a steady state with sufficiently high diffusion rate. The calculated saturation level scales with the radial diffusion rate by the same scaling of pitch angle scattering. A criterion is derived to judge the importance of microturbulence-induced radial diffusion effect comparing to the collisional pitch angle scattering effect. According to the criterion, we find that the microturbulence-induced diffusion has a stronger effect than the Coulomb collision on the TAE saturation in present tokamak devices and future burning plasmas [International Thermonuclear Experimental Reactor (ITER)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Territorial characteristics of low frequency electrostatic fluctuations in a simple magnetized torus

This paper presents an experimental investigation of turbulence in simple toroidal plasma devices without rotational transform. It is argued that Rayleigh-Taylor (flute interchange) mode may be one of the source mechanisms for the observed turbulence but is not sufficient to explain its observed global characteristics. Taking BETA device as an example, we show that pure Rayleigh-Taylor mode cannot explain (i) the observation of mode maximum at the location other than where density scale length is minimum, (ii) the comparable value of amplitude level of fluctuations in good curvature region, and (iii) the decrease in the mode amplitude with increasing magnetic field. Investigations have revealed that there exists not only poloidal plasma flow but also that it is sheared. Including this effect explains the first observation. However, modification brought about by velocity shear in the Rayleigh-Taylor mode still does not explain our second and third observations. We have taken an approach that since Rayleigh-Taylor is not excited in a good curvature region, it cannot be the source of turbulence there. Nor is it defensible to say that turbulence born in a bad curvature region is carried over through ExB rotation to the good curvature region. Consequently, we have invoked cross-field Simon-Hoh instability for this region. Experimental evidence supporting our proposal is presented. This paper concludes that toroidal devices have simultaneous existence of different self-consistent sources of turbulence in different regions of the device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

RF Plasma Heating in the PFRC-2 Device: Motivation, Goals and Methods

The motivation for using radio frequency, odd-parity rotating magnetic fields for heating field-reversed-configuration (FRC) plasmas is explained. Calculations are presented of the expected electron and ion temperatures in the PFRC-2 device, currently under construction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Equilibrium properties of the plasma sheath with a magnetic field parallel to the wall

Motivated by the magnetized target fusion (MTF) experiment [R. E. Siemon et al., Comments Plasma Phys. Controlled Fusion 18, 363 (1999)], a systematic investigation of the force balance and equilibrium plasma flows was carried out using analytical theory and the particle-in-cell code VPIC[K. J. Bowers et al., Phys. Plasmas 15, 055703 (2008)] for a one-dimensional plasma sheath with a magnetic field parallel to the wall. Initially uniform full Maxwellian plasma consisting of equal temperature collisionless electrons and ions is allowed to interact with a perfectly absorbing wall. The analysis of the steady-state force balance of the entire plasma as well as its individual components illuminates the roles that the hydrodynamic, magnetic, and electric forces play. In particular, when rho{sub thi}<lambda{sub D}, the magnetic force balances the divergence of the pressure tensor. As the magnetic field is decreased, the electric force becomes prominent in areas where quasineutrality breaks, which can be a substantial part of the sheath. Its importance depends on the relation between three parameters, namely, electron and ion thermal Larmor radii and plasma Debye length: rho{sub the}, rho{sub thi}, and lambda{sub D}. The relative importance of the electron and ion current in the magnetic or Lorentz force term can be understood through the analysis of the two-fluid force balance. It reveals that the current is carried primarily by the electrons. This is due to the direction of the electric field that helps confine the ions, but not the electrons, which are forced to carry a large current to confine themselves magnetically. In the regimes where the electric field is negligible, the ions also need the current for confinement, but in these cases the divergence of ion pressure tensor is much smaller than that of the electrons. Consequently the ion current is also smaller. The study of the electron and ion flow parallel to the wall clarifies this picture even further. In the regime of strong magnetic field, the particle average velocity parallel to the wall u{sub y} is purely diamagnetic. However, since the ion number density is very low near the wall, they do not produce considerable contribution to the current. In the rho{sub thi}<lambda{sub D} regime, u{sub y} consists of two parts: diamagnetic and E-vectorxB-vector drifts. Since the direction of the former depends on the particle charge while the latter does not (at least to lowest order), the drifts for the electrons add, while for the ions they mostly cancel each other. Although the primary motivation for this research is MTF, the analytical and computational results presented in this paper can also be applicable to the plasma sheath in the conventional magnetic confinement devices, in particular, near the first wall of tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Scaling of the plasma sheath in a magnetic field parallel to the wall

Motivated by the magnetized target fusion [R. E. Siemon et al., Comments Plasma Phys. Controlled Fusion 18, 363 (1999)] experiment, a systematic investigation of the scaling of a one-dimensional plasma sheath with a magnetic field parallel to the wall was carried out using analytical theory and the particle-in-cell code VPIC [K. J. Bowers et al., Phys. Plasmas 15, 055703 (2008)]. Starting with a uniform Maxwellian distribution in three-dimensional velocity space, plasma consisting of collisionless electrons, and ions of the same temperature interacts with a perfectly absorbing wall. A much larger ion Larmor radius causes the wall to be charged positively, creating an electric field that tends to repel the ions and attract the electrons, which is the opposite of the conventional Bohm sheath [D. Bohm, Characteristics of Electrical Discharges in Magnetic Fields (McGraw-Hill, New York, 1949)]. This manifests in the form of gyro-orbit modification by this spatially varying electric field, the degree of which is found to intricately depend on the relation between three parameters: electron and ion thermal Larmor radii and plasma Debye length: rho{sub the}, rho{sub thi}, and lambda{sub D}. Furthermore, the study of the sheath width scaling through the analysis of the full width at half max of electric field, x{sub Eh}, elucidates three distinct types of behavior of x{sub Eh}, corresponding to three different regimes: rho{sub thi}<lambda{sub D}, rho{sub the}<lambda{sub D}<rho{sub thi}, and lambda{sub D}<rho{sub the}. In addition to the sheath width, the scaling of the wall potential phi{sub Wall}, as well as the role of the ion mass and charge Z are investigated. The results of this analytical and computational approach can also be useful in studying the plasma sheath in the conventional magnetic confinement devices, in particular at the first wall of tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Turbulence in solar wind and laboratory plasmas

Recent studies of plasma turbulence based on measurements within solar wind and laboratory plasmas has been discussed. Evidences for the presence of a turbulent energy cascade, using the Yaglom's law for MHD turbulence, has been provided through data from the Ulysses spacecraft. This allows, for the first time, a direct estimate of the turbulent energy transfer rate, which can contribute to the in situ heating of the solar wind. The energy cascade has been evidenced also for ExB electrostatic turbulence in laboratory magnetized plasmas using measurements of intermittent transport (bursty turbulence) at the edge of the RFX-mod reversed field pinch plasma device. Finally the problem of the dispersive region of turbulence in solar wind above the ion-cyclotron frequency, where a spectral break is usually observed, and the problem of dissipation in a collisionless fluid as the solar wind, are briefly discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hydrogen emissions from peripheral plasmas in local island divertor and helical divertor configurations

Superdense core plasmas with a highly peaked electron density profile have been obtained in reduced recycling discharges in the Large Helical Device [O. Motojima et al., Phys. Plasmas 6, 1843 (1999)]. The polarization separation spectroscopy technique has been applied to characterize H{alpha} emissions in the peripheral region of superdense core plasmas. Fitting positions of the high intensity H{alpha} line are located just outside of the last closed flux surface in the local island divertor configuration. In the helical divertor configuration, high intensity emissions are observed around the inner and outer X points and along the divertor legs. In both configurations the hydrogen atoms have an inward velocity along the lines of sight.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tritium diagnostics in a fusion reactor

Methods for controlling tritium in a fusion reactor are reviewed. The characteristic features of the interaction of tritium with surfaces are considered, as well as its diffusive properties and its levels and saturation depths for a number of radioactive materials. New properties of boundary layers and new diffusive properties in the polycrystalline structure of metals are revealed. Unique measurements of the diffusive properties of tritium in stainless steel at room temperature are carried out. It is found that the main contribution to the diffusion process comes from the intergranular tritium flux. The capture of tritium by metals in the ITER device is calculated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Production of High Energy Tail Electrons by Electron Bernstein Waves during the Current Start-up Discharges in the LATE Device

Toroidal plasma current is started and ramped up by injecting microwave power in the electron cyclotron range of frequency without induction in the LATE device. Radial scanning with hard X-ray pulse height analysis reveals the production of high energy electrons with average energy {approx}100 keV in the radial region from R = 28 cm to 40.5 cm, which are heated by electron Bernstein wave. The radial profile of photon counts in the energy range from 25 to 200 keV is very similar to that of perpendicular pressure obtained by magnetic measurement and equilibrium analysis, suggesting that a significant portion of trapped electrons exists outside the last closed flux surface. The plasma current inside the LCFS is carried mainly by passing electrons, while some portion of the outside current may be generated as a result of the toroidal precession of trapped electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Understanding and predicting the dynamics of tokamak discharges during startup and rampdown

Understanding the dynamics of plasma startup and termination is important for present tokamaks and for predictive modeling of future burning plasma devices such as ITER. We report on experiments in the DIII-D tokamak that explore the plasma startup and rampdown phases and on the benchmarking of transport models. Key issues have been examined such as plasma initiation and burnthrough with limited inductive voltage and achieving flattop and maximum burn within the technical limits of coil systems and their actuators while maintaining the desired q profile. Successful rampdown requires scenarios consistent with technical limits, including controlled H-L transitions, while avoiding vertical instabilities, additional Ohmic transformer flux consumption, and density limit disruptions. Discharges were typically initiated with an inductive electric field typical of ITER, 0.3 V/m, most with second harmonic electron cyclotron assist. A fast framing camera was used during breakdown and burnthrough of low Z impurity charge states to study the formation physics. An improved 'large aperture' ITER startup scenario was developed, and aperture reduction in rampdown was found to be essential to avoid instabilities. Current evolution using neoclassical conductivity in the CORSICA code agrees with rampup experiments, but the prediction of the temperature and internal inductance evolution using the Coppi-Tang model for electron energy transport is not yet accurate enough to allow extrapolation to future devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗