Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CLAYS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Specific molecular design of polycarboxylate polymers exhibiting optimal compatibility with clay contaminants in concrete

Highlights: • Allyl ether-based PCEs with short side chain length and low side chain density presented superior clay resistance. • PCEs with medium side chain density exhibited best clay robustness when compared at the absolute dosed quantities. • The proportion of PCE being intercalated into the layered structure of clay was quantified. It is widely recognized that the dispersing ability of polycarboxylate superplasticizers (PCEs) could be hindered due to the presence of clay contaminants in concrete. In this study, a series of allyl ether-based polycarboxylate superplasticizers possessing short polyethylene glycol side chains was successfully synthesized and probed for their clay tolerance. The resulting PCE polymers were characterized via Size Exclusion Chromatography (SEC) to obtain their molecular properties. Thereafter, their dispersing ability was probed in the absence and presence of sodium bentonite. Allyl ether-based polycarboxylate (APEG) polymers possessing short side chains were found to exhibit enhanced clay resistance as compared to that of conventional MPEG PCEs holding long pendant chains. The mode of interaction between APEG PCEs and bentonite was investigated via sorption and XRD measurements. The data revealed that APEG PCEs possessing a lower side chain density intercalate less into the interlayer space of bentonite than those exhibiting higher side chain density.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Low-dimensional physics of clay particle size distribution and layer ordering

Abstract Clays are known for their small particle sizes and complex layer stacking. We show here that the limited dimension of clay particles arises from the lack of long-range order in low-dimensional systems. Because of its weak interlayer interaction, a clay mineral can be treated as two separate low-dimensional systems: a 2D system for individual phyllosilicate layers and a quasi-1D system for layer stacking. The layer stacking or ordering in an interstratified clay can be described by a 1D Ising model while the limited extension of individual phyllosilicate layers can be related to a 2D Berezinskii–Kosterlitz–Thouless transition. This treatment allows for a systematic prediction of clay particle size distributions and layer stacking as controlled by the physical and chemical conditions for mineral growth and transformation. Clay minerals provide a useful model system for studying a transition from a 1D to 3D system in crystal growth and for a nanoscale structural manipulation of a general type of layered materials.

42 ENGINEERING↗
DOE OSTI2022

Molecular-level understanding of metal ion retention in clay-rich materials

Clay minerals retain or adsorb metal ions in the Earth’s critical zone. Rocks, sediments and soils rich in clay minerals can concentrate rare earth elements (REEs) in ion adsorption-type deposits (IADs) and are similarly effective at metallic contaminant remediation. However, the molecular-scale chemical and physical mechanisms of metal ion retention remain only partly understood. Here, we describe the nature, location and energy requirements of metal retention at clay mineral surfaces. Retention originates mainly from electrostatic interactions during cation exchange at low pH and chemical bonding in surface complexation and precipitation at neutral and high pH. Surface complexation can induce surface redox reactions and precipitation mechanisms including neoformation of clay mineral layered structures. In IADs, outer-sphere adsorption is the major retention mechanism of REE ions. By contrast, the use of clay minerals in pollution control relies on various mechanisms that can coexist, including cation exchange, surface complexation and nucleation growth. To more effectively leverage clay mineral–metal interactions in resource recovery and contaminant remediation, complex mechanisms such as surface precipitation and redox reactions must be better understood; for instance, by utilizing advances in quantum mechanical calculations, close combination between synchrotron and simulation techniques, and upscaling of molecular-level information in macroscopic thermokinetic predictive models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Synthesis and Characterization of Copolymers and Nanocomposites from Limonene, Styrene and Organomodified-Clay Using Ultrasonic Assisted Method

In the present work, we report a simple synthesis method for preparation of copolymers and nanocomposites from limonene and styrene using clay as a catalyst. The copolymerization reaction is carried out by using a proton exchanged clay as a catalyst called Mag-H+. The effect of temperature, reaction time and amount of catalyst were studied, and the obtained copolymer structure (lim-co-sty) is characterized by Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance spectroscopy (1H-NMR) and differential scanning calorimetry (DSC). The molecular weight of the obtained copolymer is determined by gel permeation chromatography (GPC) and is about 4500 g·mol−1. The (lim-co-sty/Mag 1%, 3%, 7% and 10% by weight of clay) nanocomposites were prepared through polymer/clay mixture in solution method using ultrasonic irradiation, in the presence of Mag-CTA+ as green nano-reinforcing filler. The Mag-CTA+ is organophilic silicate clay prepared through a direct exchange process, using cetyltrimethylammonuim bromide (CTAB). The prepared lim-co-sty/Mag nanocomposites have been extensively characterized by FT-IR spectroscopy, X-ray diffraction (XRD), scanning electronic microscopy (SEM) and transmission electronic microscopy (TEM). TEM analysis confirms the results obtained by XRD and clearly show that the obtained nanocomposites are partially exfoliated for the lower amount of clay (1% and 3% wt) and intercalated for higher amounts of clay (7% and 10% wt). Moreover, thermogravimetric analysis (TGA) indicated an enhancement of thermal stability of nanocomposites compared with the pure copolymer.

Derdar, Hodhaifa↗
DOE OSTI2020

A model for discrete fracture-clay rock interaction incorporating electrostatic effects on transport

Abstract A model based on the code CrunchClay is presented for a fracture-clay matrix system that takes electrostatic effects on transport into account. The electrostatic effects on transport include those associated with the development of a diffusion potential as captured by the Nernst-Planck equation, and the formation of a diffuse layer bordering negatively charged clay particles within which partial anion exclusion occurs. The model is based on a dual continuum formulation that accounts for diffuse layer and bulk water pore space, providing a more flexible framework than is found in the classical mean electrostatic potential models. The diffuse layer model is obtained by volume averaging ion concentrations in the Poisson-Boltzmann equation, but also includes the treatment of longitudinal transport within this continuum. The calculation of transport within the bulk and diffuse layer porosity is based on a new formulation for the Nernst-Planck equation that considers averaging of diffusion coefficients and accumulation factors at grid cell interfaces. Equations for function residuals and the associated Jacobian matrix are presented such that the system of nonlinear differential-algebraic equations can be solved with Newton’s method. As an example, we consider a 2D system with a single discrete fracture within which flow and advective transport occurs that is coupled to diffusion in the clay-rich matrix. The simulation results demonstrate the lack of retardation for anions (e.g., 36 Cl − ) of the contaminant plume within the fracture flow system because they are largely excluded from the charged clay rock, while the migration of cations (e.g., 90 Sr ++ ) is more strongly attenuated. The diffusive loss of divalent cations in particular from the fracture is accentuated by their accumulation in the diffuse layer within the clay-rich matrix.

58 GEOSCIENCES↗
DOE OSTI2025

UR 2 : Ultra-rapid reactivity test for real-time, low-cost quality control of calcined clays

To reduce cement's carbon footprint, there is growing interest in commercial adoption of sustainable SCMs such as calcined clays. However, the existing ASTM standard (R 3 test, C1897) to test the reactivity of such clays takes up to 7 days and cannot be used for real-time quality control in an industrial setting. We address this issue by introducing a 5-min Ultra-Rapid Reactivity (UR 2 ) test. By dissolving 47 clay specimens in 4 M NaOH solutions at 90°C, we report that a dissolution index of 1.54Al + Si correlates strongly to the 7-day R 3 heat (R 2 = 0.92, RMSE = 94.1 J/g). This dissolution index also correlates to the 28-day compressive strength for 14 clay mixtures (R 2 = 0.94, RMSE = 1.7 MPa). This UR 2 test relies on colorimetry and can be conducted via off-the-shelf, low-cost cameras. Overall, our new UR 2 test opens a pathway for real-time, low-cost quality control of calcined clays.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Pore-scale CFD simulations of clay mobilization in natural porous media due to fresh water injection

The present work investigates mechanisms of permeability impairment as a result of low-salinity fluid injection into brine-saturated porous media containing dispersible clays. Here, we present a computational fluid dynamics model at the pore-scale to simulate detachment, migration and straining of fine particles in porous media. The model uses an immersed boundary method to simulate the motion of clay fines in a fluid. In addition to the hydrodynamic forces, we model the Derjaguin-Landau-Verwey-Overbeek forces (DLVO) between clay fines and grains. Our simulations show the impact of the injected fluid's salinity and velocity on the concentration of clay fines retained on the grain surface. We see clay particles dislodging from the grain surface in clusters of up to 12 particles. Our simulation results also demonstrate clogging of narrow pore spaces by the detached particles from the grain surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Control of the Structural Charge Distribution and Hydration State upon Intercalation of CO 2 into Expansive Clay Interlayers

Numerous experimental investigations indicated that expansive clays such as montmorillonite can intercalate CO 2 preferentially into their interlayers and therefore potentially act as a material for CO 2 separation, capture, and storage. However, an understanding of the energy–structure relationship during the intercalation of CO 2 into clay interlayers remains elusive. Here, in this study, we use metadynamics molecular dynamics simulations to elucidate the energy landscape associated with CO 2 intercalation. Our free energy calculations indicate that CO 2 favorably partitions into nanoconfined water in clay interlayers from a gas phase, leading to an increase in the CO 2 /H 2 O ratio in clay interlayers as compared to that in bulk water. CO 2 molecules prefer to be located at the centers of charge-neutral hydrophobic siloxane rings, whereas interlayer spaces close to structural charges tend to avoid CO 2 intercalation. The structural charge distribution significantly affects the amount of CO 2 intercalated in the interlayers. These results provide a mechanistic understanding of CO 2 intercalation in clays for CO 2 separation, capture, and storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Direct Ink-Write Printing of Ceramic Clay with an Embedded Wireless Temperature and Relative Humidity Sensor

This research presents a simple method to additively manufacture Cone 5 porcelain clay ceramics by using the direct ink-write (DIW) printing technique. DIW has allowed the application of extruding highly viscous ceramic materials with relatively high-quality and good mechanical properties, which additionally allows a freedom of design and the capability of manufacturing complex geometrical shapes. Clay particles were mixed with deionized (DI) water at different ratios, where the most suitable composition for 3D printing was observed at a 1:5 w/c ratio (16.2 wt.%. of DI water). Differential geometrical designs were printed to demonstrate the printing capabilities of the paste. In addition, a clay structure was fabricated with an embedded wireless temperature and relative humidity (RH) sensor during the 3D printing process. The embedded sensor read up to 65% RH and temperatures of up to 85 °F from a maximum distance of 141.7 m. The structural integrity of the selected 3D printed geometries was confirmed through the compressive strength of fired and non-fired clay samples, with strengths of 70 MPa and 90 MPa, respectively. This research demonstrates the feasibility of using the DIW printing of porcelain clay with embedded sensors, with fully functional temperature- and humidity-sensing capabilities.

42 ENGINEERING↗
DOE OSTI2021

Effectiveness of PCE superplasticizers in calcined clay blended cements

Highlights: • Cements containing 0–40 wt% of a calcined clay rich in meta kaolin were studied. • The calcined clay decreases fluidity of the blended cements considerably. • In cement, the calcined clay adsorbs a large amount of Ca{sup 2+} ions. • A common HPEG polycarboxylate superplasticizer fluidizes OPC/CC blends best. • A zwitterionic PCE also fluidizes well and adsorbs in similar amounts as HPEG. The impact of a calcined clay (CC) rich in meta kaolin (~50 wt%) present in composite cements at 0–40% substitution rate for the clinker was studied relative to the dispersing force of different PCE superplasticizers. It was found that CC increases the water demand of the blended cements considerably (+85% for the 60:40 blend vs. neat OPC). Furthermore, PCEs which fluidize OPC best also provide optimal performance in CC blended cements, but require much higher dosages (in OPC/CC 60:40, 4–6 times as compared to neat OPC). In all systems, HPEG-PCE produced superior dispersing performance over anionic MPEG-PCEs. A mechanistic study involving zeta potential measurements revealed that the initially negatively charged calcined clay surface adsorbs huge amounts of Ca{sup 2+} ions from the pore solution, thus facilitating adsorption of anionic PCE superplasticizers. The results signify that commercially available PCE products can effectively fluidize OPC/CC blended cements.

36 MATERIALS SCIENCE↗
DOE OSTI2023

What dictates soft clay-like lithium superionic conductor formation from rigid salts mixture

Abstract Soft clay-like Li-superionic conductors, integral to realizing all-solid-state batteries, have been recently synthesized by mixing rigid-salts. Here, through computational and experimental analysis, we clarify how a soft clay-like material can be created from a mixture of rigid-salts. Using molecular dynamics simulations with a deep learning-based interatomic potential energy model, we uncover the microscopic features responsible for soft clay-formation from ionic solid mixtures. We find that salt mixtures capable of forming molecular solid units on anion exchange, along with the slow kinetics of such reactions, are key to soft-clay formation. Molecular solid units serve as sites for shear transformation zones, and their inherent softness enables plasticity at low stress. Extended X-ray absorption fine structure spectroscopy confirms the formation of molecular solid units. A general strategy for creating soft clay-like materials from ionic solid mixtures is formulated.

25 ENERGY STORAGE↗
DOE OSTI2025

Relationship between clay minerals and microorganisms in underground hydrogen storage reservoirs: a mini review

Hydrogen (H 2 ) will play a vital role in the global shift towards sustainable energy systems. Due to the high cost and challenges associated with storing hydrogen in large quantities for industrial applications, Underground Hydrogen Storage (UHS) in geological formations has emerged as a promising solution. Clay minerals, abundant in subsurface environments, play a critical role in UHS by providing low permeability, cation exchange capacity, and stability, essential for preventing hydrogen leakage. However, microorganisms in the subsurface, particularly hydrogenotrophic species, interact with clay minerals in ways that can affect the integrity of these storage systems. Microbes form biofilms on clay surfaces, which can cause pore clogging and reduce the permeability of the reservoir, potentially stabilizing H 2 storage and limiting injectivity. Microbial-induced chemical weathering, through the production of organic acids and redox reactions, can degrade clay minerals, releasing metal ions and destabilizing the storage site. These interactions raise concerns about the long-term storage capacity of UHS, as microbial processes could lead to H 2 loss and caprock degradation, compromising the storage system’s effectiveness. This mini review aims to cover the current understanding of the interactions between clay minerals and microorganisms and how these dynamics can affect the safe and sustainable deployment of UHS .

Clark, Allison↗
DOE OSTI2020

A study of rare earth ion-adsorption clays: The speciation of rare earth elements on kaolinite at basic pH

Synthesized rare earth ion-adsorption clays (La, Ce, Nd, Dy and Y, ~ 400 ppm each) were prepared from kaolinite at various basic pH in open-air conditions. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma mass spectrometry (ICP-MS) were used to characterize the effect of pH on the adsorption mechanism of rare earth elements (REEs) on kaolinite. The crystal structure of kaolinite by XRD analysis is not altered after REE adsorption, suggesting that REEs are bound to the surface of kaolinite. Elemental analysis by XPS and ICP-MS show that the surface concentration of REEs on kaolinite is pH dependent, and a local maximum of the surface concentration is achieved at pH 10. Three characteristics of the La 3d 5/2 XPS photoemission feature were measured and compared to those of standard La compounds to probe the speciation of REEs, and electrostatically bound hydroxides such as REE(OH) 2 + are identified as the primary species on the surface of kaolinite. Finally, compared to the typical ion-adsorption clays with intrinsic acidic pH, clays synthesized at basic pH exhibit similarly high rare earth ion-exchange efficiency with ammonium sulfate (AS), suggesting that rare earth ion-adsorption clays can exist in both acidic and basic environments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Combined Effects of Fe(III)-Bearing Clay Minerals and Organic Ligands on U(VI) Bioreduction and U(IV) Speciation

Reduction of U(VI) to U(IV) drastically reduces its solubility and has been proposed as a method for remediation of uranium contamination. However, much is still unknown about the kinetics, mechanisms, and products of U(VI) bioreduction in complex systems. In this work, U(VI) bioreduction experiments were conducted with Shewanella putrefaciens strain CN32 in the presence of clay minerals and two organic ligands: citrate and EDTA. In reactors with U and Fe(III)-clay minerals, the rate of U(VI) bioreduction was enhanced due to the presence of ligands, likely because soluble Fe 3+ - and Fe 2+ -ligand complexes served as electron shuttles. In the presence of citrate, bioreduced U(IV) formed a soluble U(IV)-citrate complex in experiments with either Fe-rich or Fe-poor clay mineral. In the presence of EDTA, U(IV) occurred as a soluble U(IV)-EDTA complex in Fe-poor montmorillonite experiments. However, U(IV) remained associated with the solid phase in Fe-rich nontronite experiments through the formation of a ternary U(IV)-EDTA-surface complex, as suggested by the EXAFS analysis. Our study indicates that organic ligands and Fe(III)-bearing clays can significantly affect the microbial reduction of U(VI) and the stability of the resulting U(IV) phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Structural Implications of Interfacial Hydrogen Bonding in Hydrated Wyoming-Montmorillonite Clay

Montmorillonite (MMT) clay - a layered porous nanomaterial used as seals in engineered waste containment barriers for spent nuclear fuel - adopts discrete hydration/swelling states depending upon surrounding water and ion activities and confining pressure. The structure of nanoconfined water and charge-balancing counterions in the clay mineral interlayers dictate the swelling and mechanical behavior of MMT, so a molecular model for this clay with high structural fidelity is required to accurately predict the reliability of long-term nuclear waste storage. Here, we present a molecular model for MMT that is based on high resolution transmission electron microscopy of Wyoming-MMT single crystals. Imaging data unambiguously show a cis-vacant arrangement of structural hydroxyl groups in the octahedral sheet, whereas existing molecular models assume a centrosymmetric trans-vacant configuration for MMT. Furthermore, using atomistic simulations, we find that the cis-vacant arrangement of structural hydroxyl groups significantly affects the structure of adsorbed water yielding a larger population of hydrogen bonds with bridging oxygens on the tetrahedral sheet and weak hydrogen bonding between the hydroxyl groups in the octahedral sheet and water in the clay mineral interlayers. As a result, water adsorbed in the interlayer is more "ice-like", with stronger ordering and lower density, although the diffusivity of the interlayer species is not significantly diminished. Our improved structural model for MMT provides insight into the energetics of water adsorption, which ultimately dictates its pore- to macro-scale swelling, transport, and fracture properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Fast Advective Water Flow through Nanochannels in Clay Interlayers: Implications for Moisture Transport in Soils and Unconventional Oil/Gas Production

Water flow in nanometer or sub-nanometer hydrophilic channels bears special importance in diverse fields of science and engineering. However, the nature of such water flow remains elusive. In this work, we report our molecular-modeling results on water flow in a sub-nanometer clay interlayer between two montmorillonite layers. We show that a fast advective flow can be induced by evaporation at one end of the interlayer channel, that is, a large suction pressure created by evaporation (~818 MPa) is able to drive the fast water flow through the channel (~0.88 m/s for a 46 Å-long channel). Scaled up for the pressure gradient to a 2 μm particle, the velocity of water is estimated to be about 95 μm/s, indicating that water can quickly flow through a μm-sized clay particle within seconds. The prediction seems to be confirmed by our thermogravimetric analysis of bentonite hydration and dehydration processes, which indicates that water transport at the early stage of the dehydration is a fast advective process, followed by a slow diffusion process. The possible occurrence of a fast advective water flow in clay interlayers prompts us to reassess water transport in a broad set of natural and engineered systems such as clay swelling/shrinking, moisture transport in soils, water uptake by plants, water imbibition/release in unconventional hydrocarbon reservoirs, and cap rock integrity of supercritical CO 2 storage.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Electronic Structure and Mechanical Properties of Solvated Montmorillonite Clay Using Large-Scale DFT Method

Montmorillonite clay (MMT) has been widely used in engineering and environmental applications as a landfill barrier and toxic waste repository due to its unique property as an expandable clay mineral that can absorb water easily. This absorption process rendered MMT to be highly exothermic due to electrostatic interactions among molecules and hydrogen bonds between surface atoms. A detailed study of a large supercell model of structural clay enables us to predict long-term nuclear waste storage. Herein, a large solvent MMT model with 4071 atoms is studied using ab initio density functional theory. The DFT calculation and analysis clarify the important issues, such as bond strength, solvation effect, elasticity, and seismic wave velocities. These results are compared to our previous study on crystalline MMT (dry). The solvated MMT has reduced shear modulus (G), bulk modulus (K), and Young’s modulus (E). We observe that the conduction band (CB) in the density of states (DOS) of solvated MMT model has a single, conspicuous peak at –8.5 eV. Moreover, the atom-resolved partial density of states (PDOS) summarizes the roles played by each atom in the DOS. These findings illuminate numerous potential sophisticated applications of MMT clay.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Recycling of Pretreated Polyolefin-Based Ocean-Bound Plastic Waste by Incorporating Clay and Rubber

Plastic waste found in oceans has become a major concern because of its impact on marine organisms and human health. There is significant global interest in recycling these materials, but their reclamation, sorting, cleaning, and reprocessing, along with the degradation that occurs in the natural environment, all make it difficult to achieve high quality recycled resins from ocean plastic waste. To mitigate these limitations, various additives including clay and rubber were explored. In this study, we compounded different types of ocean-bound (o-HDPE and o-PP) and virgin polymers (v-LDPE and v-PS) with various additives including a functionalized clay, styrene-multi-block-copolymer (SMB), and ethylene-propylene-based rubber (EPR). Physical observation showed that all blends containing PS were brittle due to the weak interfaces between the polyolefin regions and the PS domains within the polymer blend matrix. Blends containing clay showed rough surfaces and brittleness because of the non-uniform distribution of clay particles in the polymer matrix. To evaluate the properties and compatibility of the blends, characterizations using differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and small-amplitude oscillatory shear (SAOS) rheology were carried out. The polymer blend (v-LDPE, o-HDPE, o-PP) containing EPR showed improved elasticity. Incorporating additives such as rubber could improve the mechanical properties of polymer blends for recycling purposes.

42 ENGINEERING↗