Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boussinesq equation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Emergence of a nocturnal low-level jet from a broad baroclinic zone

An analytical model is presented for the generation of a Blackadar-like nocturnal low-level jet in a broad baroclinic zone. The flow is forced from below (flat ground) by a surface buoyancy gradient and from above (free atmosphere) by a constant pressure gradient force. Diurnally-varying mixing coefficients are specified to increase abruptly at sunrise and decrease abruptly at sunset. With attention restricted to a surface buoyancy that varies linearly with a horizontal coordinate, the Boussinesq-approximated equations of motion, thermal energy, and mass conservation reduce to a system of one-dimensional equations that can be solved analytically. Sensitivity tests with southerly jets suggest that (i) stronger jets are associated with larger decreases of the eddy viscosity at sunset (as in Blackadar theory), (ii) the nighttime surface buoyancy gradient has little impact on jet strength, and (iii) for pure baroclinic forcing (no free-atmosphere geostrophic wind), the nighttime eddy diffusivity has little impact on jet strength, but the daytime eddy diffusivity is very important and has a larger impact than the daytime eddy viscosity. The model was applied to a jet that developed in fair weather conditions over the Great Plains from southern Texas to northern South Dakota on 1 May 2020. The ECMWF Reanalysis v5 (ERA5) for the afternoon prior to jet formation showed that a broad north-south-oriented baroclinic zone covered much of the region. The peak model-predicted winds were in good agreement with ERA5 winds and lidar data from the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) central facility in north-central Oklahoma.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1990

Numerical simulation of 3-D Benard convection with gravitational modulation

In this numerical study, randomly and sinusoidally modulated gravitational fields imposed on three-dimensional Rayleigh-Benard convection are investigated in an effort to understand the effects of vibration (G-Jitter) on fluid systems. The time-dependent, Navier-Stokes equations and the energy equation with Boussinesq approximations are solved by a semi-implicit, pseudospectral procedure. An analysis of energy balances indicates that with increasing modulation amplitude, transition from synchronous to relaxation oscillation goes through the subharmonic response. Random modulations are found to be less stabilizing than sinusoidal and are shown to impose three-dimensionality on the flow for some parameter ranges both at terrestrial and zero base gravity conditions.

Biringen, S.↗
DOE OSTI2022

Isogeometric large-eddy simulations of turbulent particle-laden flows

In recent years, isogeometric analysis (IGA) has attracted significant attention from the computational mechanics community due to its ability to integrate design and analysis. Besides, IGA is also a higher-order discretization technique for solving partial differential equations, showing high approximation capability per degree of freedom. In this paper, we extend the application realm of IGA to particle-laden flows based on Eulerian–Eulerian description that couples Navier–Stokes equations with a density transport equation through a Boussinesq approximation. The coupled systems are solved by using quadratic non-uniform rational B-spline (NURBS) functions and a recently developed residual-based variational multiscale (VMS) formulation, which introduces coupling between the fine velocity scales and density equation residuals. We deploy the proposed approach to perform large-eddy simulations (LES) of dilute particle-laden flows over a flat surface at Reynolds number = 10,000. We compare the simulation results against direct numerical simulation (DNS) results from the literature. We find that combining VMS and IGA, the proposed approach enables accurate prediction of a wide range of flow/particle statistics with a relatively lower mesh resolution.

Mathematics↗
NASA NTRS2000

Measurement of the Surface Dilatational Viscosity of an Insoluble Surfactant Monolayer at the Air/Water Interface Using a Pendant Drop Apparatus

When a fluid interface with surfactants is at rest, the interfacial stress is isotropic (as given by the equilibrium interfacial tension), and is described by the equation of state which relates the surface tension to the surfactant surface concentration. When surfactants are subjected to shear and dilatational flows, flow induced interaction of the surfactants; can create interfacial stresses apart from the equilibrium surface tension. The simplest relationship between surface strain rate and surface stress is the Boussinesq-Scriven constitutive equation completely characterized by three coefficients: equilibrium interfacial tension, surface shear viscosity, and surface dilatational viscosity Equilibrium interfacial tension and surface shear viscosity measurements are very well established. On the other hand, surface dilatational viscosity measurements are difficult because a flow which change the surface area also changes the surfactant surface concentration creating changes in the equilibrium interfacial tension that must be also taken into account. Surface dilatational viscosity measurements of existing techniques differ by five orders of magnitude and use spatially damped surface waves and rapidly expanding bubbles. In this presentation we introduce a new technique for measuring the surface dilatational viscosity by contracting an aqueous pendant drop attached to a needle tip and having and insoluble surfactant monolayer at the air-water interface. The isotropic total tension on the surface consists of the equilibrium surface tension and the tension due to the dilation. Compression rates are undertaken slow enough so that bulk hydrodynamic stresses are small compared to the surface tension force. Under these conditions we show that the total tension is uniform along the surface and that the Young-Laplace equation governs the drop shape with the equilibrium surface tension replaced by the constant surface isotropic stress. We illustrate this technique using DPPC as the insoluble surfacant monolayer and measured for it a surface dilatational viscosity in the LE phase that is 20 surface poise.

Lorenzo, Jose↗
NASA NTRS1993

Evaluation of a distributed catchment scale water balance model

The validity of some of the simplifying assumptions in a conceptual water balance model is investigated by comparing simulation results from the conceptual model with simulation results from a three-dimensional physically based numerical model and with field observations. We examine, in particular, assumptions and simplifications related to water table dynamics, vertical soil moisture and pressure head distributions, and subsurface flow contributions to stream discharge. The conceptual model relies on a topographic index to predict saturation excess runoff and on Philip's infiltration equation to predict infiltration excess runoff. The numerical model solves the three-dimensional Richards equation describing flow in variably saturated porous media, and handles seepage face boundaries, infiltration excess and saturation excess runoff production, and soil driven and atmosphere driven surface fluxes. The study catchments (a 7.2 sq km catchment and a 0.64 sq km subcatchment) are located in the North Appalachian ridge and valley region of eastern Pennsylvania. Hydrologic data collected during the MACHYDRO 90 field experiment are used to calibrate the models and to evaluate simulation results. It is found that water table dynamics as predicted by the conceptual model are close to the observations in a shallow water well and therefore, that a linear relationship between a topographic index and the local water table depth is found to be a reasonable assumption for catchment scale modeling. However, the hydraulic equilibrium assumption is not valid for the upper 100 cm layer of the unsaturated zone and a conceptual model that incorporates a root zone is suggested. Furthermore, theoretical subsurface flow characteristics from the conceptual model are found to be different from field observations, numerical simulation results, and theoretical baseflow recession characteristics based on Boussinesq's groundwater equation.

Troch, Peter A.↗
DOE OSTI2024

The inviscid incompressible limit of Kelvin–Helmholtz instability for plasmas

The Kelvin–Helmholtz Instability (KHI) is an interface instability that develops between two fluids or plasmas flowing with a common shear layer. KHI occurs in astrophysical jets, solar atmosphere, solar flows, cometary tails, planetary magnetospheres. Two applications of interest, encompassing both space and fusion applications, drive this study: KHI formation at the outer flanks of the Earth’s magnetosphere and KHI growth from non-uniform laser heating in magnetized direct-drive implosion experiments. Here, we study 2D KHI with or without a magnetic field parallel to the flow. We use both the GAMERA code, which solves the compressible Euler equations, and the STRATOSPEC code, which solves the Navier-Stokes equations under the Boussinesq approximation, coupled with the magnetic field dynamics. GAMERA is a global three-dimensional MHD code with high-order reconstruction in arbitrary nonorthogonal curvilinear coordinates, which is developed for a large range of astrophysical applications. STRATOSPEC is a three-dimensional pseudo-spectral code with an accuracy of infinite order (no numerical diffusion). Magnetized KHI is a canonical case for benchmarking hydrocode simulations with extended MHD options. An objective is to assess whether or not, and under which conditions, the incompressibility hypothesis allows to describe a dynamic compressible system. For comparing both codes, we reach the inviscid incompressible regime, by decreasing the Mach number in GAMERA, and viscosity and diffusion in STRATOSPEC. Here, we specifically investigate both single-mode and multi-mode initial perturbations, either with or without magnetic field parallel to the flow. The method relies on comparisons of the density fields, 1D profiles of physical quantities averaged along the flow direction, and scale-by-scale spectral densities. We also address the triggering, formation and damping of filamentary structures under varying Mach number or Atwood number, with or without a parallel magnetic field. Comparisons show very satisfactory results between the two codes. The vortices dynamics is well reproduced, along with the breaking or damping of small-scale structures. We end with the extraction of growth rates of magnetized KHI from the compressible regime to the incompressible limit in the linear regime assessing the effects of compressibility under increasing magnetic field. The observed differences between the two codes are explained either from diffusion or non-Boussinesq effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1981

The three dimensional spherical model for the AGCE

The development of accurate numerical model of the atmospheric general circulation experiment (AGCE) is discussed. The model will serve both as a design and diagnostic tool for the AGCE, as well as for conducting numerical experiments which otherwise cannot be performed by AGCE. The code in its final form will solve the complete three dimensional nonlinear Navier-Stokes energy equations with the Boussinesq approximation. The code will allow for any thermal boundary conditions and any external forcing in the form of rotation and body forces and will allow for variable thermodynamic coefficients.

Antar, B. N.↗
NASA NTRS1983

Theoretical study of multiple equilibria in simple axisymmetric tropical circulations

The possibility that the asymmetric part of the atmospheric circulation can possess multiple equilibrium states is examined using a two-layer axisymmetric model involving balance equations on an equatorial beta plane. Mountains are excluded from consideration and a Newtonian cooling formulation represents thermal forcing. A temperature maximum at 25 deg N is selected to simulate summer conditions in the Northern Hemisphere. Steady-state solutions obtained are investigated for stability with regard to first and second y-mode perturbations. A single stable mode is found, together with two other quasi-stable states. Attention is given to numerically modeling multiple equilibria in symmetric circulations, and one steady-state is determined for the two-layer model. A model employing primitive equations with the Boussinesq approximation is also examined, and it also furnishes only one steady state. The reasons for the lack of multiple steady-states as derived by the models are discussed.

Goswami, B. N.↗
NASA NTRS1991

Time-accurate finite difference solutions to the incompressible Navier-Stokes/energy equations

Two new algorithms for solving coupled Navier-Stokes and energy equations are presented. The algorithms are compared with available Navier-Stokes solutions for the model problem of a driven-cavity-flow over a range of Reynolds numbers. It is noted that the algorithms represent two different implementations of the fractional step approach to the solution of the coupled Navier-Stokes and energy equations using the Boussinesq approximation.

Mirfakhraee, Ali↗
NASA NTRS1992

Direct simulation of the stably stratified turbulent Ekman layer

The Navier-Stokes equations and the Boussinesq approximation were used to compute a 3D time-dependent turbulent flow in the stably stratified Ekman layer over a smooth surface. The simulation data are found to be in very good agreement with atmospheric measurements when nondimensionalized according to Nieuwstadt's local scaling scheme. Results suggest that, when Reynolds number effects are taken into account, the 'constant Froud number' stable layer model (Brost and Wyngaard, 1978) and the 'shearing length' stable layer model (Hunt, 1985) for the dissipitation rate of turbulent kinetic energy are both valid. It is concluded that there is good agreement between the direct numerical simulation results and large-eddy simulation results obtained by Mason and Derbyshire (1990).

Coleman, G. N.↗
NASA NTRS1982

Time-dependent solutions of multimode convection equations

Truncated modal equations are used to study the time evolution of thermal convection. In the Boussinesq approximation these nonlinear equations are obtained by expanding the fluctuating velocity and temperature fields in a finite set of planforms of the horizontal coordinates. Numerical studies dealing with two or three modes with triad interactions are discussed. Rich time dependence was found in these cases: periodic and aperiodic solutions can be obtained, along with various steady solutions. Three-mode solutions reproduce the qualitative appearance of spoke-pattern convection as observed in experiments at high Prandtl numbers. Though the values of the periods of the time-dependent solutions do not agree with those of the experiments, their variation with Rayleigh number compares favorably. Except at the highest Rayleigh number considered (10,000,000), the theoretical Nusselt numbers agree well with experiment.

Toomre, J.↗
DOE OSTI2025

Numerical investigation of two-dimensional buoyancy-driven eddies in liquid metal magnetohydrodynamic flows in breeding blankets *

Abstract Lead–lithium flows are key features in the design of tokamak breeding blanket concepts such as the dual-coolant lead–lithium (DCLL). Since they flow under magnetic fields, they are affected by magnetohydrodynamic (MHD) effects. The neutron flux originating in the tokamak plasma heats the breeding blanket channels in a non-uniform manner, inducing buoyancy forces in the liquid metal. Buoyancy may become a source of quasi-two-dimensional (Q2D) turbulence, and the appearance of eddies may affect the transport of heat and tritium across the blanket. Blankets characterized by high-speed liquid metal flows (such as DCLL) will need ceramic insulating walls to reduce the MHD-related pressure drop in the channels. In our simulations, we have used the Q2D model proposed by Sommeria and Moreau (SM82) which is especially suitable for modeling electrically insulating channel flows. On top of that, we have modelled buoyancy forces in the momentum equation using the Oberbeck–Boussinesq approximation. In this work, we include a validation of the implemented Q2D model in buoyancy-driven cases and identify a thermohydraulic configuration that promotes the generation of eddies and the accumulation of tritium. We also show the results provided by our post-processing tool based on the bi-dimensional fast Fourier transform for eddy detection and characterization. We complete our investigation by performing an initial assessment of how eddies can accumulate tritium in the breeding blanket. We conclude by discussing the relevance of preventing accumulation of tritium within the blanket and suggest a possible solution.

Suarez, Daniel (ORCID:0000000251740100)↗
DOE OSTI2021

Thermodynamically consistent semi-compressible fluids: a variational perspective

This paper presents (Lagrangian) variational formulations for single and multicomponent semi-compressible fluids with both reversible (entropy-conserving) and irreversible (entropy-generating) processes. Semi-compressible fluids are useful in describing low-Mach dynamics, since they are soundproof. These models find wide use in many areas of fluid dynamics, including both geophysical and astrophysical fluid dynamics. Specifically, the Boussinesq, anelastic and pseudoincompressible equations are developed through a unified treatment valid for arbitrary Riemannian manifolds, thermodynamic potentials and geopotentials. By design, these formulations obey the 1st and 2nd laws of thermodynamics, ensuring their thermodynamic consistency. This general approach extends and unifies existing work, and helps clarify the thermodynamics of semi-compressible fluids. To further this goal, evolution equations are presented for a wide range of thermodynamic variables: entropy density s, specific entropy η, buoyancy b, temperature T, potential temperature θ and a generic entropic variable χ; along with a general definition of buoyancy valid for all three semicompressible models and arbitrary geopotentials. Finally, the elliptic equation for the pressure perturbation (the Lagrange multiplier that enforces semi-compressibility) is developed for all three equation sets in the case of reversible dynamics, and for the Boussinesq/anelastic equations in the case of irreversible dynamics; and some discussion is given of the difficulty in formulating it for the pseudoincompressible equations with irreversible dynamics.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1976

Studies of earth simulation experiments

The low gravity environment of earth orbit offers the potential for performing experiments involving baroclinic Geophysical Fluid Dynamics (GFD) on spherical surfaces. These experiments in turn have the potential for providing deeper understanding of large scale planetary and solar circulations. However, to perform these experiments, one requires an experimental technique whereby a radially directed body force can be generated to simulate a radial gravitational force field. One viable technique is the use of dielectric fluids with temperature dependent dielectric permittivity in a radially directed electric field. Application of the Boussinesq approximation to the equations of motion for this system and restrictions on the size of certain electrodynamic terms in the energy equations yields a set of equations which are analogous to the equations of motions of geophysical systems like the earth's atmosphere on term by term basis. The theoretical design of GFD experiments for performance in earth orbit are described along with results of preliminary tests of a prototype.

Hart, J. E.↗
NASA NTRS1989

Computational study of 3-D Benard convection with gravitational modulation

In this numerical study the effects of a modulated gravitational field on three-dimensional Rayleigh-Benard convection with heating from above or from below is investigated. The full, nonlinear, time-dependent, Boussinesq Navier-Stokes equations and the energy equation are solved by a semiimplicit, pseudo-spectral procedure. This study has been motivated by the need to better understand the effects of vibration (G-Jitter) on fluids systems especially in the low gravity environment.

Biringen, S.↗
NASA NTRS1991

GEOSIM: A numerical model for geophysical fluid flow simulation

A numerical model which simulates geophysical fluid flow in a wide range of problems is described in detail, and comparisons of some of the model's results are made with previous experimental and numerical studies. The model is based upon the Boussinesq Navier-Stokes equations in spherical coordinates, which can be reduced to a cylindrical system when latitudinal walls are used near the pole and the ratio of latitudinal length to the radius of the sphere is small. The equations are approximated by finite differences in the meridional plane and spectral decomposition in the azimuthal direction. The user can specify a variety of boundary and initial conditions, and there are five different spectral truncation options. The results of five validation cases are presented: (1) the transition between axisymmetric flow and baroclinic wave flow in the side heated annulus; (2) the steady baroclinic wave of the side heated annulus; (3) the wave amplitude vacillation of the side heated annulus; (4) transition to baroclinic wave flow in a bottom heated annulus; and (5) the Spacelab Geophysical Fluid Flow Cell (spherical) experiment.

Butler, Karen A.↗
NASA NTRS1987

The effects of adiabatic and viscous heatings on plumes

The influences of viscous and adiabatic heatings on the transient development of plumes have been assessed by employing the time-dependent convection equations in the extended-Boussinesq limit. Both temperature-dependent and temperature- and pressure-dependent viscosities are employed. For constant thermal expansion of coefficient, the vigor of plume flows is diminished with larger magnitudes of the thermal expansivity. This effect is caused by the local domination of adiabatic decompression over viscous heating inside the developing plume for both the Cartesian and axisymmetric domains. For deep mantle flows a thermal expansivity decreasing with depth is required for thin plume structures to exist. Values of the thermal expansivity contrast, which can promote plume growth, are in accord with estimates from recent studies in seismic equation of state.

Zhao, Wuling↗