Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Biomimetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Abbr. Final report: Self-assembled molecular containers as artificial water channels: towards biomimetic desalination membranes

Global water scarcity demands advances in desalination technologies that can deliver more fresh water with less energy. Current reverse osmosis membranes are fundamentally limited by a trade-off between how much water they can pass and how well they block salts. To address this challenge, we developed a bottom-up strategy to design and test artificial water channels that mimic the efficiency of biological proteins but are built from robust synthetic molecules. Over two years, we synthesized and evaluated more than twenty molecular channel candidates, including supramolecular macrocycles and nanographene pores with atomically precise structures. We showed that small chemical modifications allow direct control over pore size and chemistry, which in turn govern water permeability and salt rejection. In collaboration with university partners, we reported the first experimental demonstration of water transport through a nanographene pore, bridging a long-standing gap between simulation and experiment. Several of the artificial channels we developed achieved water–salt selectivity beyond conventional polymer membranes, highlighting their potential for next-generation desalination and precision separations.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Growth in heterogeneous, evolving macromolecular networks: toward functional, biomimetic material

This report summarizes research carried out by the Balazs and Matyjaszewski Labs at Pitt and CMU, respectively, during 2025-26, supported by the DOE grant. It has produced the following 3 research articles and 2 review publications that acknowledged grant ER45998: 1. Computational Modeling of Hyperbranched Polymers 2. Synthesis of Structurally Tailored Networks 3. Sustainable and Oxygen-Tolerant Catalysis 4. A review paper on Current Status and Outlook for ATRP 5. A review paper on Future Directions for Atom Transfer Radical Polymerization

Balazs, Anna (ORCID:0000000255552692)↗
DOE OSTI2024

Dynamic Implications of Noncovalent Interactions in Amphiphilic Single-Chain Polymer Nanoparticles

Single-chain polymer nanoparticles (SCNPs) combine the chemical diversity of synthetic polymers with the intricate structure of biopolymers, generating versatile biomimetic materials. The mobility of polymer chain segments at length scales similar to secondary structural elements in proteins is critical to SCNP structure and thus function. However, the influence of noncovalent interactions used to form SCNPs (e.g., hydrogen-bonding and biomimetic secondary-like structure) on these conformational dynamics is challenging to quantitatively assess. To isolate the effects of noncovalent interactions on SCNP structure and conformational dynamics, we synthesized a series of amphiphilic copolymers containing dimethylacrylamide and monomers capable of forming these different interactions: (1) di(phenylalanine) acrylamide that forms intramolecular β-sheet-like cross-links, (2) phenylalanine acrylamide that forms hydrogen-bonds but lacks a defined local structure, and (3) benzyl acrylamide that has the lowest propensity for hydrogen-bonding. Each SCNP formed folded structures comparable to those of intrinsically disordered proteins, as observed by size exclusion chromatography and small angle neutron scattering. The dynamics of these polymers, as characterized by a combination of dynamic light scattering and neutron spin echo spectroscopy, was well described using the Zimm with internal friction (ZIF) model, highlighting the role of each noncovalent interaction to additively restrict the internal relaxations of SCNPs. These results demonstrate the utility of local scale interactions to control SCNP polymer dynamics, guiding the design of functional biomimetic materials with refined binding sites and tunable kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Toward Computation-Guided Design of Tunable Organic-Inorganic CdS Quantum Dot Binary Superlattices

Combining the advantages of structural programmability in sequence-defined biomimetic molecules and the controllable packing geometry in nanoparticle superlattices, we demonstrate a self-assembled organic-inorganic superlattice whose structure can be altered with the slightest change in the sequence of the organic counterpart. Here, oleate-coated CdS quantum dots (QDs) form a square-packed superlattice with a 1:1 molar equivalence of a di-block amphiphilic peptoid (Nbrpe6Dig) in chloroform. In contrast, no apparent structure is observed in the organic solvent alone. Based on theoretical evidence, we show that the assembly is a binary superlattice where both the CdS QDs and the peptoids serve as building blocks and further predict a correlation between the superlattice structure and the peptoid sequence. The computationally guided prediction is validated by experiments where superlattice transformation is observed with modified peptoids. The mechanism identified in our work inspires new ways to control and tune organic-inorganic hybrid nanomaterial self-assembly.

Qi, Xin↗
DOE OSTI2025

Strategies for fabricating aligned nano- and microfiber scaffolds: an overview for cell culture applications

The rapidly growing demand for cell manufacturing and in vitro tissue fabrication has led to the development of various technologies for biomimetic artificial extracellular matrix (ECM), including three major materials: hydrogels, fibrous scaffolds, and decellularized tissues. The latter two materials are closer to the biomimetic goal of replicating natural ECM. The scalability of the scaffolds made of decellularized tissues is limited. The development of 3D fibrous ECM is at the initial stage owing to the recent advantages of novel nanofiber spinning technologies. These novel technologies brought about simultaneous control over a range of critical characteristics, such as fiber diameter, length, material, draw ratio, spacing, and alignment into well-controlled 3D constructs. There is still a long way to go in designing 3D fibrous scaffolds based on cell response studies. The primary objective of this review is to provide an analysis of the recent progress in novel nano- and microfiber spinning methods and uncover their potential for precise fiber alignment into 3D structures.

Peranidze, Kristina [University of Georgia, Athens↗
DOE OSTI2024

Defining the Mechanism of Proton Pumping in Heme-Copper Oxidases

During this award, progress was made in two distinct areas of science, one was within the context of bioinorganic chemistry and another in the context of biomimetic, small molecule chemistry. The overarching goals of this work was to understand the fundamental mechanistic drivers for biological reactions specifically, proton transfer reactions. In the biochemical sphere, this goal was investigated through investigation of the bacterial proton pump, ubiquinol oxidase (UbO). Further work in the bioinorganic space was completed in collaboration with the Bandarian group on a novel natural peptide product. While in the biomimetic space, this work was explored through a computational collaborative study with the Riordan group relating to proton coupled electron transfers in iron complexes as relating to the heme active site in proton pumping enzymes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Unveiling the nanoscale architectures and dynamics of protein assembly with in situ atomic force microscopy

Proteins play a vital role in different biological processes by forming complexes through precise folding with exclusive inter- and intra-molecular interactions. Understanding the structural and regulatory mechanisms underlying protein complex formation provides insights into biophysical processes. Furthermore, the principle of protein assembly gives guidelines for new biomimetic materials with potential applications in medicine, energy, and nanotechnology. Atomic force microscopy (AFM) is a powerful tool for investigating protein assembly and interactions across spatial scales (single molecules to cells) and temporal scales (milliseconds to days). It has significantly contributed to understanding nanoscale architectures, inter- and intra-molecular interactions, and regulatory elements that determine protein structures, assemblies, and functions. This review describes recent advancements in elucidating protein assemblies with in situ AFM. We discuss the structures, diffusions, interactions, and assembly dynamics of proteins captured by conventional and high-speed AFM in near-native environments and recent AFM developments in the multimodal high-resolution imaging, bimodal imaging, live cell imaging, and machine-learning-enhanced data analysis. These approaches show the significance of broadening the horizons of AFM and enable unprecedented explorations of protein assembly for biomaterial design and biomedical research.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ion Transport in Self-Assembled Peptoid Membranes with Carbon Nanotube Porin Channels

Artificial membranes that combine high ionic selectivity with mechanical robustness remain a key challenge for next-generation separation technologies. Here, we report ion transport measurements in biomimetic membranes composed of crystalline peptoid nanosheets co-assembled with carbon nanotube porins (CNTPs). Pure peptoid sheets formed defect-free, ion-impermeable membranes, which were then suspended over small SiN x nanopore apertures for ion transport measurements. Incorporation of CNTPs into the peptoid sheet matrix made these membranes ion permeable, with ion conductance values consistent with ion transport through individual and multiple carbon nanotube channels. In conclusion, the modularity and molecular order of peptoid membranes, combined with the exceptional conductance properties of CNTPs, position this platform as a versatile framework for assembling programmable, selective, and robust nanofluidic membranes that can bridge the performance gap between biological and synthetic membrane materials.

Biotechnology↗
DOE OSTI2025

Hemicellulose Modulates Nanoscale Lignin Architecture in Synthetic Plant Cell Walls

Cellulose, hemicellulose, and lignin─the most abundant biopolymers on Earth─compose the structural matrix of plant biomass, providing renewable resources critical to bioenergy and sustainable materials. Despite their importance, the nanoscale mechanochemical processes underlying lignocellulose assembly during plant secondary cell wall formation remain poorly understood, hindering advancements in biomass conversion technologies. Here, in this study, we synthesize a biomimetic model system comprising cellulose–hemicellulose nanofibrils (CHN) to examine guaiacyl lignin polymerization in a physiologically relevant context. Using advanced nanocharacterization─scattering-type scanning near-field optical microscopy (s-SNOM) with infrared nanospectroscopy coupled to solid-state nuclear magnetic resonance (NMR)─we reveal that hemicellulose presence considerably modulates lignin deposition and alters its interunit bond distribution. Specifically, hemicellulose-rich environments dramatically reduce lignin deposition by approximately 50% and yield highly condensed lignin structures characterized by severely reduced β–O–4′ linkages (<2%) and suppressed β–β′ linkages. Conversely, cellulose-alone scaffolds support notably higher β–O–4′ content (∼10%), resulting in a more uniform nanoscale lignin coating. Our work helps explain how accessible hemicellulose sites, both sterically and chemically, direct radical coupling during lignification, fundamentally reshaping lignin’s nanoscale architecture. These findings deepen our mechanistic understanding of plant cell wall biosynthesis and inform strategies aimed at enhancing biomass deconstruction efficiency for sustainable bioenergy applications.

NMR↗
DOE OSTI2026

Polymorphism in Self-Assembly of Short Peptoid Sequences

Due to various applications enabled by diverse morphologies of self-assembled sequence-defined polymers, controlling the self-assembly of synthetic peptidomimetics into designed morphologies has emerged as a promising route for the development of bioinspired functional materials. Herein, we report morphological control over the assembly of a series of short peptoids, or poly-N-substituted glycines, that contain asymmetric hydrophobic domains. We demonstrate that the inherent flexibility of amphiphilic peptoid bilayers drives assembly polymorphism, resulting in the coexistence of nanosheets, twisted ribbons, and nanofibers three distinct morphologies. By tuning peptoid molecular interactions through variations in sequence design, solution pH, and temperature, we demonstrate precise control over the twisting and folding of peptoid bilayers, enabling the formation of well-defined nanosheets and nanohelices. Molecular dynamics simulations further unravel how the introduction of asymmetric hydrophobic domains enables the flexibility of peptoid bilayers and results in peptoid assembly polymorphism. By tuning peptoid molecular interactions through heating, we further demonstrate the transformation of nanosheets into nanohelices. We envision that our mechanistic investigation of peptoid assembly polymorphism provides a strong foundation for leveraging peptoid sequences and chemistries to achieve controlled molecular interactions, driving the creation of biomimetic materials with tailored morphologies and functionalities.

assembly polymorphism↗
DOE OSTI2024

A molecular view of peptoid-induced acceleration of calcite growth

The extensive deposits of calcium carbonate (CaCO 3 ) generated by marine organisms constitute the largest and oldest carbon dioxide (CO 2 ) reservoir. These organisms utilize macromolecules like peptides and proteins to facilitate the nucleation and growth of carbonate minerals, serving as an effective method for CO 2 sequestration. However, the precise mechanisms behind this process remain elusive. In this study, we report the use of sequence-defined peptoids, a class of peptidomimetics, to achieve the accelerated calcite step growth kinetics with the molecular level mechanistic understanding. By designing peptoids with hydrophilic and hydrophobic blocks, we systematically investigated the acceleration in step growth rate of calcite crystals using in situ atomic force microscopy (AFM), varying peptoid sequences and concentrations, CaCO 3 supersaturations, and the ratio of Ca 2+ / HCO 3 − . Mechanistic studies using NMR, three-dimensional fast force mapping (3D FFM), and isothermal titration calorimetry (ITC) were conducted to reveal the interactions of peptoids with Ca 2+ and HCO 3 − ions in solution, as well as the effect of peptoids on solvation and energetics of calcite crystal surface. Our results indicate the multiple roles of peptoid in facilitating HCO 3 − deprotonation, Ca 2+ desolvation, and the disruption of interfacial hydration layers of the calcite surface, which collectively contribute to a peptoid-induced acceleration of calcite growth. These findings provide guidelines for future design of sequence-specific biomimetic polymers as crystallization promoters, offering potential applications in environmental remediation (such as CO 2 sequestration), biomedical engineering, and energy storage where fast crystallization is preferred.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Unraveling the Molecular Origin of Prey-Wrapping Spider Silk's Unique Mechanical Properties and Assembly Process Using NMR

Prey wrapping spider silk's unique mechanical properties are investigated confirming the silk's high degree of extensibility and superior toughness compared to other types of spider silk. For the first time, the pre-spinning dope phase is studied in isotope-enriched intact aciniform (AC) silk glands using solution NMR that reveals a combination of α-helical domains linked by disordered random coil chains consistent with previously proposed “beads-on-a-string” models. The model is further refined through the AlphaFold2 protein structure prediction tool. Finally, extensive magic angle spinning (MAS) solid-state (SS) NMR data for isotopically-enriched fibers is used to refine the structural model for AC silk from two species, A. aurantia and A. argentata. The SSNMR data shows that the AC silk fibers are highly α-helical, coiled-coil in structure but, also exhibit significant β-sheet components that can be traced back to the Gly-rich disordered linker regions in the pre-spinning dope phase that are converted to β-sheet structures during fiber formation. This combination of mechanical and structural characterization enhances the understanding of AC silk's liquid-to-solid transition and structure-mechanics relationship. In conclusion, these prey wrap silk results and models will provide the basis for the design of biomimetic materials inspired by the AC spider silk system.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mechanical and Light Activation of Materials for Chemical Production

Abstract Mechanical expansion and contraction of pores within photosynthetic organisms regulate a series of processes that are necessary to manage light absorption, control gas exchange, and regulate water loss. These pores, known as stoma, allow the plant to maximize photosynthetic output depending on environmental conditions such as light intensity, humidity, and temperature by actively changing the size of the stomal opening. Despite advances in artificial photosynthetic systems, little is known about the effect of such mechanical actuation in synthetic materials where chemical reactions occur. It is reported here on a hybrid hydrogel that combines light‐activated supramolecular polymers for superoxide production with thermal mechanical actuation of a covalent polymer. Superoxide production is important in organic synthesis and environmental remediation, and is a potential precursor to hydrogen peroxide liquid fuel. It is shown that the closing of pores in the hybrid hydrogel results in a substantial decrease in photocatalysis, but cycles of swollen and contracted states enhance photocatalysis. The observations motivate the development of biomimetic photosynthetic materials that integrate large scale motion and chemical reactions.

Đorđević, Luka [Department of Chemical Sciences Un↗
DOE OSTI2025

Shape‐Evolving Structured Liquids

Migration, division, and reconfiguration - functions essential to living systems - are driven by active processes. Developing synthetic mimics is an outstanding challenge. Lipid bilayers that bound natural systems are locally deformed by active species, e.g., microtubules, but the resulting non-equilibrium shapes relax when active species motion ceases, and the shape changes lack immediate control. A fully synthetic system is described, driven by active particles encapsulated by a reconfigurable nanoparticle-surfactant membrane that undergoes shape fluctuations reminiscent of living cells. These shape changes are preserved after particle activity stops. Surfactant concentration tunes the interfacial tension over three orders of magnitude, making on-demand shape evolution possible. Directional migration, division, and reconfiguration across multiple scales are possible, leading to a new class of biomimetic, reconfigurable, and responsive materials, paving the way for autonomous synthetic machines.

Kim, Paul Y↗
DOE OSTI2026

Synaptic Functionality and Neuromorphic Information Processing in Membrane Ion Channel Junctions

The human brain performs complex memory and computational tasks with high energy efficiency by regulating ion transport through membrane channels. These signaling mechanisms have been inspiring the development of nanofluidic memristors that emulate synaptic behavior. Here, in this study, we describe a membrane ion channel synapse (MICS), constructed from aqueous droplets linked by gramicidin A channels, that achieves neuromorphic functionality. MICS exhibits memristive ion transport with hysteretic current–voltage behavior arising from voltage-dependent channel formation and ion transport dynamics. MICS emulates a range of synaptic behaviors including associative learning. We further demonstrate its application in reservoir computing by performing handwritten digit classification and tic-tac-toe game and explore the system parameters that improve the computational performance. This droplet-based biomimetic synapse offers a potentially scalable and energy-efficient platform for next-generation neuromorphic computing systems.

Droplet interface bilayer↗
DOE OSTI2023

Dynamic Oscillation and Motion of Oil‐in‐Water Emulsion Droplets

The interplay of interfacial tensions on droplets results in a range of self‐powered motions that mimic those of living systems and serve as a tunable model to understand their complex non‐equilibrium behavior. Spontaneous shape deformations and oscillations are crucial features observed in nature but difficult to incorporate in synthetic artificial systems. Here, we report sessile oil‐in‐water emulsions that exhibit rapid oscillating behavior. The oscillations depend on the nature and concentration of the surfactant, the chemical composition of the oil, and the wettability of the solid substrate. The rapid changes in the contact angle per oscillation are observed using side‐view optical microscopy. We propose that the changes in the interfacial tension of the oil droplets is due to the partitioning of the surfactant into the oil phase and the movement of self‐emulsified oil out of the parent droplets giving rise to the rhythmic variation in droplet contact‐line. The ability to control and understand droplet oscillation can help model similar oscillations in out‐of‐equilibrium systems in nature and reproduce biomimetic behavior in artificial systems for various applications, such as microfluidic lab‐on‐a‐chip and adaptive materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Fuel‐Driven π‐Conjugated Superstructures to Form Transient Conductive Hydrogels

Despite advances in creating dissipative materials with transient properties, such as hydrogels and active droplets, their application remains confined to temporal changes in structural properties. Developing out-of-equilibrium materials whose electronic functions are parameterized by a chemical reaction cycle is challenging. Yet, this class of materials is required to construct biomimetic materials. In contrast to traditional chemical reaction cycles that exploit molecularly dissolved building blocks at thermodynamic equilibrium, we show that fiber structures derived from reactive naphthalene diimide (NDI) building blocks can be used as resting states to form far-from-equilibrium conductive hydrogels after the addition of chemical fuels. Upon fueling the NDI-derived fibers, a dual-component activation and deactivation pathway is deduced by kinetic analysis and is absent when using a molecularly dissolved resting state. Investigating the solid-state morphologies of the structures formed throughout the fuel-driven reaction cycle using cryo-EM reveals that the resting thermodynamic fibers evolve to transient thicker fibrils and layered superstructures. We show that the transient redox-active hydrogels exhibit a nearly threefold increase in electrical conductivity upon fuel consumption before reverting to their original value over hours. In conclusion, these far-from-equilibrium materials are potential candidates in applications such as programmable biorobotics and chemical computing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Data‐Driven Engineering of Thermostable Collagen‐Mimetic Peptoid Triple Helices

Collagen-mimetic peptides (CMPs) are engineered molecules designed to replicate the triple-helical structure of natural collagen. A repeating x–y-Gly sequence is the defining motif of CMPs and is critical to their triple-helical structure and stability. Substitutions to the residues occupying the x and y positions present a means to modulate the CMP structure and properties. Peptoid residues—N-substituted glycine derivatives—present an attractive potential substitution due to their thermal stability, proteolytic resistance, biocompatibility, and diverse palette of non-natural side chains, but also tend to introduce a high degree of backbone flexibility that can diminish the stability of the triple helix. In this work, we report a computational active learning cycle comprising molecular dynamics simulation, Gaussian process regression, and Bayesian optimization to computationally identify a number of promising peptoid substitutions predicted to stabilize the desired quaternary structure through side chain interactions and produce stable peptoid-based collagen-like triple helices. To experimentally test the computational predictions, a top candidate identified by the screen was synthesized and imaged using scanning electron microscopy to resolve fibril-like bundles consistent with collagen-like triple helices. This work predicts a number of CMP peptoid substitutions capable of forming stable triple-helical structures, presents a generalizable design strategy for engineering desired peptoid structures, and opens new avenues for the design of peptoid-based biomimetic materials.

active learning↗