Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bi”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Anisotropic Structural Collapse of Mg 3 Sb 2 and Mg 3 Bi 2 at High Pressure

Alloys between Mg 3 Sb 2 and Mg 3 Bi 2 have recently been shown to be exceptional thermoelectric materials due in part to their anomalously low thermal conductivity. In the present study, in situ high-pressure synchrotron X-ray diffraction was used to investigate the structure and bonding in Mg 3 Sb 2 and Mg 3 Bi 2 at pressures up to 50 GPa. Our results confirm prior predictions of isotropic in-plane and out-of-plane compressibility but reveal large disparities between the bond strength of the two distinct Mg sites. Using single-crystal diffraction, we show that the octahedral Mg–Sb bonds are significantly more compressible than the tetrahedral Mg–Sb bonds in Mg 3 Sb 2 , which lends support to prior arguments that the weaker octahedral Mg bonds are responsible for the anomalous thermal properties of Mg 3 Sb 2 and Mg 3 Bi 2 . Further, we report the discovery of a displacive and reversible phase transition in both Mg 3 Sb 2 and Mg 3 Bi 2 above 7.8 and 4.0 GPa, respectively. Furthermore, the transition to the high-pressure structure involves a highly anisotropic volume collapse, in which the out-of-plane axis compresses significantly more than the in-plane axes. Single-crystal diffraction at high pressure was used to solve the monoclinic high-pressure structure ( C 2/ m ), which is a distorted variant of the ambient-pressure structure containing four unique Mg coordination environments.

36 MATERIALS SCIENCE↗

Twofold symmetry of proximity-induced superconductivity in Bi 2 Te 3 / Bi 2 Sr 2 CaCu 2 O 8 + δ heterostructures revealed by scanning tunneling microscopy

We observe proximity-induced superconductivity in in situ prepared heterostructures constructed by topological insulator Bi 2 Te 3 thin films and high-temperature cuprate superconductors Bi 2 Sr 2 CaCu 2 O 8+δ . The superconducting gap maximum is about 7.6 meV on the surface of Bi 2 Te 3 thin films with a thickness of two quintuple layers, and the gap value decreases with an increase in the film thickness. Moreover, the quasiparticle interference data show clear evidence of a twofold symmetric superconducting gap with gap minima along one pair of the principal crystalline axes of Bi 2 Te 3 . This gap form is consistent with the Δ 4y notation of the topological superconductivity proposed in such systems. Our results provide fruitful information on the possible topological superconductivity induced by the proximity effect in high-temperature superconducting cuprates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Shallow core levels, or how to determine the doping and T c of Bi 2 Sr 2 CaCu 2 O 8 + δ and Bi 2 Sr 2 CuO 6 + δ without cooling

In this study, determining the doping level in high-temperature cuprate superconductors is crucial for understanding the origin of superconductivity in these materials and for unlocking their full potential. However, accurately determining the doping level remains a significant challenge due to a complex interplay of factors and limitations in various measurement techniques. In particular, in Bi 2 Sr 2 CuO 6+δ and Bi 2 Sr 2 CaCu 2 O 8+δ , where the mobile carriers are introduced by non-stoichiometric oxygen δ, the determination has been extremely problematic. Here, we study the doping dependence of the electronic structure of these materials in angle-resolved photoemission and find that both the doping level, p, and the superconducting transition temeprature, T c can be precisely determined from the binding energy of the Bi 5d core-levels. The measurements can be performed at room temperature, enabling the determination of p and T c without cooling the samples. This should be very helpful for further studies of these materials

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Time-Sequenced Flow Field Prediction in an Optima Spark-Ignition Direct-Injection Engine Using Bidirectional Recurrent Neural Network (bi-RNN) with Long Short-Term Memory

To further improve the energy conversion efficiency of internal combustion engine, the transient and complex air flow movement inside the cylinder needs to be better understood and controlled. Although the in-cylinder flow fields are highly stochastic with strong cycle-to-cycle fluctuations, machine learning can still provide an efficient way to learn and regress the complex flow movement process inside the cylinder. In this work, a bidirectional recurrent neural network (bi-RNN) model with long short-term memory was applied to predict the in-cylinder flow fields at different time steps using training data from mull-cycle particle image velocimetry (PIV) measurements. To evaluate the agreement between the true and predicted flow fields, structure and magnitude comparison indices are calculated both globally and locally. The comparison results show that the bi-RNN model can accurately predict the bulk flow and vortex motions from early intake stroke to compression stroke. This work demonstrates that the machine learning model has the potential to predict the underlying dynamics of the interaction between in-cylinder flows and provides a reliable way to improve temporal resolution in PIV flow data to better reveal transient in-cylinder flow features.

Bi-RNN model↗

Opposite current-induced spin polarizations in bulk-metallic Bi 2 Se 3 and bulk-insulating Bi 2 Te 2 Se topological insulator thin flakes

One of the most fundamental and exotic properties of three-dimensional (3D) topological insulators (TIs) is spin-momentum locking (SML) of their topological surface states (TSSs), promising for potential applications in future spintronics. However, other possible conduction channels, such as a trivial two-dimensional electron gas (2DEG) with strong Rashba-type spin-orbit interaction (SOI) and bulk-conducting states that may possess a spin Hall effect (SHE), can coexist in 3D TIs, making determining the origin of the current-induced spin polarization (CISP) difficult. Here, we directly compared the CISP between bulk-insulating Bi 2 Te 2 Se (BTS221) and bulk-metallic Bi2Se3 thin flakes using spin potentiometry. In the bulk-insulating BTS221, the observed CISP has a sign consistent with the expected helicity of the SML of the TSS, but an opposite sign to its calculated bulk spin Hall conductivity. However, compared to BTS221, an opposite CISP is observed in the bulk-metallic Bi2Se3, consistent with both the expectations of its Rashba-Edelstein effect of the band-bending induced 2DEG and bulk intrinsic spin Hall Effect (SHE). If one assumes a representative occupation of the Rashba band of 3×10 13 cm –2 in Bi 2 Se 3 with a relevant relaxation time of 100 fs, the contribution to the CISP could be more dominated by the bulk intrinsic SHE. Our results provide an electrical way to distinguish the TSS from other possible conducting channels in spin transport measurements on 3D TIs, and open ways for the potential applications in charge-spin conversion devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Properties of Pb(1-x)Bi(x)/Ba2YCu3O(x) composites - Reaction of Ba2YCu3O(x) with Pb and Bi

This paper describes experiments conducted with a purpose of fabricating superconducting composites from Pb, Bi, and Ba2YCu3O(x), together the results of SEM examinations and energy dispersive spectroscopy performed on products. Results showed a limited utility of Pb and Pb(1-x)Bi(x) as matrices for ceramic superconductors. It was found that cold pressing followed by sintering at 200 C resulted in a composite which excluded flux below 90 K but did not show zero electrical resistance until the metal superconducting transition. Processing at 400 or 950 C resulted in oxygen depleted perovskite and/or metal oxides; these materials displayed greatly degraded superconducting properties. Finally, processing at 800 C resulted in high Tc only for composites containing more than 90 wt pct ceramic.

Hepp, A. F.↗

The oxygen content of the high-temperature superconducting compound Bi(2+x)Sr(3-y)CayCu2O(8+d) with respect to varying Ca and Bi contents

The oxygen content of Bi(2+x)Sr(3-y)Cu2O(8+d) (2212 phase) has been determined as a function of its cation concentration. With increasing Ca and Bi content the oxygen content increases and T(sub c) decreases. The oxygen content of Ca rich 2212 phase increases with decreasing annealing temperatures. The study shows that the T(sub c) of the 2212 phase primarily is controlled by its cation concentration.

Majewski, P.↗

Oxygen Vacancies Enriched Bi Based Catalysts for Enhancing Electrocatalytic CO2 Reduction to Formate

The practical application of CO2 conversion through electrochemical reduction is still hindered by the lack of high performance and cost-effective catalysts. It is thus imperative to explore feasible strategies for scalable fabrication of catalysts for CO2 reduction to targeting products with high efficiency. Herein, for the first time, a hybrid of BiOx encapsulated in carbon thin layer is developed as high active electrocatalyst for CO2 conversion, which is synthesized by pyrolysis using Bi MOF as precursor and sacrificial template. The carbon layer overcoating BiOx catalyst exhibits superior performance for CO2 reduction to formate, achieving a maximum Faradaic efficiency of 89.3 % and a maximum current density of 37.8 mA cm-2. It is found that the as-prepared BiOx catalyst is enriched with oxygen vacancies stabilized by the encapsulating carbon layer. Both the carbon layer and oxygen vacancies improve the charge transfer of the catalyst, in favor of the high formate current density. The defects of oxygen vacancies play a vital role in CO2 adsorption and activation and thereby further enhancing the electrocatalytic ability for formate production.

oxygen vacancy, bismuth, carbon coating, CO2 elect↗

Compositional Tuning of Magnetic Properties in a Series of Transition Metal Site-Deficient UCo x Bi 2 and UNi x Bi 2 Phases

Varying the electronic structure of topological materials through aliovalent substitution is a primary approach to tuning their physical properties. Unlike substitution, metal site deficiency intrinsic to some structure types, including HfCuSi 2 -type, has rarely been employed for controlling the properties of topological phases. In this report, we describe the synthesis and characterization of two new series of compounds, UCoxBi 2 and UNixBi 2 , which demonstrate the variation of transition metal content through synthetic conditions. Magnetic measurements reveal the dependence between the extent of transition metal incorporation and the magnetism of the resulting phase. DFT calculations demonstrated the ability to model their formation and predict the stability ranges of transition metal-site deficient compounds.

Crystal structure↗

HOTCFGM-2D: A Coupled Higher-Order Theory for Cylindrical Structural Components with Bi-Directionally Components with Bi-Directionally Graded Microstructures

The objective of this two-year project was to develop and deliver to the NASA-Glenn Research Center a two-dimensional higher-order theory, and related computer codes, for the analysis and design of cylindrical functionally graded materials/structural components for use in advanced aircraft engines (e.g., combustor linings, rotor disks, heat shields, brisk blades). To satisfy this objective, two-dimensional version of the higher-order theory, HOTCFGM-2D, and four computer codes based on this theory, for the analysis and design of structural components functionally graded in the radial and circumferential directions were developed in the cylindrical coordinate system r-Theta-z. This version of the higher-order theory is a significant generalization of the one-dimensional theory, HOTCFGM-1D, developed during the FY97 for the analysis and design of cylindrical structural components with radially graded microstructures. The generalized theory is applicable to thin multi-phased composite shells/cylinders subjected to steady-state thermomechanical, transient thermal and inertial loading applied uniformly along the axial direction such that the overall deformation is characterized by a constant average axial strain. The reinforcement phases are uniformly distributed in the axial direction, and arbitrarily distributed in the radial and circumferential direction, thereby allowing functional grading of the internal reinforcement in the r-Theta plane. The four computer codes fgmc3dq.cylindrical.f, fgmp3dq.cylindrical.f, fgmgvips3dq.cylindrical.f, and fgmc3dq.cylindrical.transient.f are research-oriented codes for investigating the effect of functionally graded architectures, as well as the properties of the multi-phase reinforcement, in thin shells subjected to thermomechanical and inertial loading, on the internal temperature, stress and (inelastic) strain fields. The reinforcement distribution in the radial and circumferential directions is specified by the user. The thermal and inelastic properties of the individual phases can vary with temperature. The inelastic phases are presently modeled by the power-law creep model generalized to multi-directional loading (within fgmc3dq.cylindrical.f and fgmc3dq.cylindrical.transient.f for steady-state and transient thermal loading, respectively), and incremental plasticity and GVIPS unified viscoplasticity theories (within the steady-state loading versions fgmp3dq.cylindrical.f and fgmgvips3dq.cylindrical.f).

Pindera, Marek-Jerzy↗