Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BeF2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

30 records · Page 2

Thermophysical properties of FLiBe using moment tensor potentials

Fluoride salts are prospective materials for applications in some next-generation nuclear reactors and their thermophysical properties at various conditions are of interest. Experimental measurement of the properties of these salts is often difficult and, in some cases, unfeasible due to challenges from high temperatures, impurity control, and corrosivity. Therefore, accurate theoretical methods are needed for fluoride salt property prediction. In this work, we used moment tensor potentials (MTP) to approximate the potential energy surface of eutectic FLiBe (66.6% LiF – 33.3% BeF2) predicted by the ab initio (DFT-D3) method. Here, we then used the developed potential and molecular dynamics to obtain several thermophysical properties of FLiBe, including radial distribution functions, density, self-diffusion coefficients, thermal expansion, specific heat capacity, bulk modulus, viscosity, and thermal conductivity. Our results show that the MTP potential approximates the potential energy surface accurately and the overall approach yields very good agreement with experimental values. The converged fitting can be obtained with less than 600 configurations generated from DFT calculations, which data can be generated in just 1200 core hours on today's typical processors. The MTP potential is faster than many machine learning potentials and about one order of magnitude slower than widely used empirical molten salt potentials such as Tosi/Fumi.

36 MATERIALS SCIENCE↗

Steady RANS methodology for calculating pressure drop in an in-line molten salt compact crossflow heat exchanger

We report the development of molten salt cooled reactors (MSR) and fluoride-salt cooled high temperature reactors (FHR) requires the use of advanced design tools for the primary heat exchanger design. Due to geometric and flow characteristics, compact (pitch to diameter ratios equal to or less than 1.25) heat exchangers with a crossflow flow arrangement can become desirable for these reactors. Unfortunately, the available experimental data is limited for compact tube bundles or banks in crossflow. Computational Fluid Dynamics can be used to alleviate the lack of experimental data in these tube banks. Previous computational efforts have been primarily focused on large S/D ratios (larger than 1.4) using unsteady Reynolds averaged Navier-Stokes and Large Eddy Simulation frameworks. These approaches are useful, but have large computational requirements that make comprehensive design studies impractical. A CFD study was conducted with steady RANS in an effort to provide a starting point for future design work. The study was performed for an in-line tube bank geometry with FLiBe (LiF-BeF2), a frequently selected molten salt, as the working fluid. Based on the estimated pressure drops, the pressure and velocity distributions in the domain, an appropriate meshing strategy was determined and presented. Periodic boundaries in the spanwise direction transverse flow were determined to be an appropriate boundary condition for reduced computational domains. The domain size was investigated and a minimum of 2-flow channels for a domain is recommended to ensure the behavior is accounted for. Finally, the standard low Re κ-ε (Lien) turbulence model was determined to be the most appropriate for steady RANS of this case at the time of writing.

42 ENGINEERING↗

The LIBRA Experiment: Investigating Robust Tritium Accountancy in Molten FLiBe Exposed to a D-T Fusion Neutron Spectrum

The Liquid Immersion Blanket: Robust Accountancy (LIBRA) experiment will be a first-of-a-kind experiment to explore and develop the liquid immersion blanket (LIB) concept. The LIB is a radically simple molten–LiF-BeF2 (FLiBe)–salt tritium breeding blanket for deuterium-tritium (D-T)–fueled fusion power plants (FPPs) achieving a high tritium breeding ratio (TBR) in neutronics models. However, tritium breeding in FLiBe is inherently difficult to study experimentally. As a result, the coupled issues of FLiBe radiochemistry and tritium (T) transport are poorly understood. LIBRA approaches this challenge by simulating an FPP blanket environment using a D-T neutron generator and ≈ 1000 kg of FLiBe. LIBRA will investigate T breeding, containment, and extraction, coupled with FLiBe redox control and radiochemistry. The primary goal of LIBRA is to demonstrate robust T accountancy in blanket prototypical conditions. Here, T accountancy encompasses accurate predictions of T breeding in the FLiBe; detection and measurement of all T bred in LIBRA; and speciation of the T extracted from the FLiBe. Initial neutronics simulations of LIBRA indicate that a global TBR of ~ 1 is possible, where the TBR is defined as the number of tritons bred and extracted from FLiBe relative to the number of neutrons produced by D-T fusion reactions in the neutron generator. In this paper, we present the LIBRA concept and its scientific goals in the context of T breeding experiments. We also consider the potential impact of the LIB on the future fusion power industry, motivating further development of FLiBe-based T breeding research activities such as LIBRA.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Compatibility of Type 304H Stainless Steel in Static Molten FLiBe for Inertial Confinement Fusion Reactors: Role of Impurities and Redox Control

Molten fluoride salts, such as FLiBe (LiF-BeF2), are promising candidates for tritium breeding and heat transfer in fusion reactors, but corrosion of structural materials remains a major challenge. This study investigates the corrosion behavior of austenitic stainless steel 304H in purified and NiF2-containing FLiBe at 500°C and 600°C, focusing on the effects of impurities and redox control. Exposure to purified FLiBe resulted in the concurrent depletion of Cr, Mn, and Fe, with corrosion at 500 °C dominated by the combined oxide formation and elemental dissolution, while at 600°C elemental depletion was predominant. The addition of a controlled NiF2 impurity significantly accelerated corrosion at both temperatures, demonstrating the sensitivity of 304H to the salt redox state. Beryllium additions were effective in mitigating corrosion for both baseline and NiF2-containing FLiBe; minimal depletion of Cr, Mn, and Fe occurred with Be additions as low as 2.5 mg (147 wppm), and no NiBe intermetallics formed at 5 mg (294 wppm), indicating that small Be inventories can provide substantial protection without deleterious phase formation. Thermodynamic equilibrium and coupled thermodynamic-kinetic analyses at the salt-alloy interface suggested low corrosion rates in systems with limited hydrogen fluoride (HF) generation, highlighting the importance of salt redox control. Estimates for a Be addition rate were calculated for the HYLIFE-II fusion reactor that can mitigate corrosion-induced degradation, assuming complete conversion of tritium to tritium fluoride (TF). Overall, 304H shows reasonable compatibility with FLiBe under optimized redox conditions. These results provide quantitative guidance for material selection and salt management in fusion blanket and heat exchanger systems and motivate validation under flowing, nonisothermal, and irradiated conditions.

Pillai, Rishi [ORNL] (ORCID:0000000243688197)↗

Materials Data on Be2Ni(NF7)2 by Materials Project

(BeF2)2Ni(NF5)2 crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of four beryllium fluoride molecules and two Ni(NF5)2 clusters. In each Ni(NF5)2 cluster, Ni2+ is bonded in an octahedral geometry to six F1- atoms. There are four shorter (1.76 Å) and two longer (2.26 Å) Ni–F bond lengths. N4+ is bonded in a trigonal non-coplanar geometry to three F1- atoms. There is two shorter (1.39 Å) and one longer (1.50 Å) N–F bond length. There are five inequivalent F1- sites. In the first F1- site, F1- is bonded in a single-bond geometry to one N4+ atom. In the second F1- site, F1- is bonded in a single-bond geometry to one Ni2+ atom. In the third F1- site, F1- is bonded in a single-bond geometry to one N4+ atom. In the fourth F1- site, F1- is bonded in a distorted bent 120 degrees geometry to one Ni2+ and one N4+ atom. In the fifth F1- site, F1- is bonded in a single-bond geometry to one Ni2+ atom.

36 MATERIALS SCIENCE↗

Materials Data on Be(NF2)2 by Materials Project

BeF2(NF)2 crystallizes in the orthorhombic Pnma space group. The structure is zero-dimensional and consists of four beryllium fluoride molecules and eight monofluoroamine molecules.

36 MATERIALS SCIENCE↗

Enhanced molten salt purification by electrochemical methods: feasibility experiments with flibe

Molten salts are considered within the Very High Temperature Reactor program as heat transfer media because of their intrinsically favorable thermo-physical properties at temperatures starting from 300 C and extending up to 1200 C. In this context two main applications of molten salt are considered, both involving fluoride-based materials: as primary coolants for a heterogeneous fuel reactor core and as secondary heat transport medium to a helium power cycle for electricity generation or other processing plants, such as hydrogen production. The reference design concept here considered is the Advanced High Temperature Reactor (AHTR), which is a large passively safe reactor that uses solid graphite-matrix coated-particle fuel (similar to that used in gas-cooled reactors) and a molten salt primary and secondary coolant with peak temperatures between 700 and 1000 C, depending upon the application. However, the considerations included in this report apply to any high temperature system employing fluoride salts as heat transfer fluid, including intermediate heat exchangers for gas-cooled reactor concepts and homogenous molten salt concepts, and extending also to fast reactors, accelerator-driven systems and fusion energy systems. The most important initial requirement for heat transfer test of molten salt systems is the establishment of reference coolant materials to use in the experiments. An earlier report produced within the same project (INL/EXT-10-18297) highlighted how thermo-physical properties of the materials that directly impact the heat transfer behavior are strongly correlated to the of composition and impurities concentration of the melt. It is therefore essential to establish laboratory techniques that can measure the melt composition, and to develop purification methods that would allow the production of large quantities of coolant with the desired purity. A companion report titled ‘An experimental test plan for the characterization of molten salt thermo-chemistry properties in heat transport systems’ describes the options available to reach such objectives and contains extended references to published work. The report highlights how electrochemical methods are the most promising techniques for the development of instrumentation aimed at the measurement of melts composition and for enhanced purification systems. The purpose of this work is to summarize preliminary experimental activities performed at the INL Safety and Tritium Applied Research facility in support of the development of electrochemistry based instrumentation and purification systems. The experiments have been focused on the LiF-BeF2 eutectic (67 and 33 mol%, respectively), also known as flibe.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An experimental test plan for the characterization of molten salt thermochemical properties in heat transport systems

Molten salts are considered within the Very High Temperature Reactor program as heat transfer media because of their intrinsically favorable thermo-physical properties at temperatures starting from 300 C and extending up to 1200 C. In this context two main applications of molten salt are considered, both involving fluoride-based materials: as primary coolants for a heterogeneous fuel reactor core and as secondary heat transport medium to a helium power cycle for electricity generation or other processing plants, such as hydrogen production. The reference design concept here considered is the Advanced High Temperature Reactor (AHTR), which is a large passively safe reactor that uses solid graphite-matrix coated-particle fuel (similar to that used in gas-cooled reactors) and a molten salt primary and secondary coolant with peak temperatures between 700 and 1000 C, depending upon the application. However, the considerations included in this report apply to any high temperature system employing fluoride salts as heat transfer fluid, including intermediate heat exchangers for gas-cooled reactor concepts and homogenous molten salt concepts, and extending also to fast reactors, accelerator-driven systems and fusion energy systems. The purpose of this report is to identify the technical issues related to the thermo-physical and thermo-chemical properties of the molten salts that would require experimental characterization in order to proceed with a credible design of heat transfer systems and their subsequent safety evaluation and licensing. In particular, the report outlines an experimental R&D test plan that would have to be incorporated as part of the design and operation of an engineering scaled facility aimed at validating molten salt heat transfer components, such as Intermediate Heat Exchangers. This report builds on a previous review of thermo-physical properties and thermo-chemical characteristics of candidate molten salt coolants that was generated as part of the same project [1]. However, this work focuses on two materials: the LiF-BeF2 eutectic (67 and 33 mol%, respectively, also known as flibe) as primary coolant and the LiF-NaF-KF eutectic (46.5, 11.5, and 52 mol%, respectively, also known as flinak) as secondary heat transport fluid. At first common issues are identified, involving the preparation and purification of the materials as well as the development of suitable diagnostics. Than issues specific to each material and its application are considered, with focus on the compatibility with structural materials and the extension of the existing properties database.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Engineering Database of Liquid Salt Thermophysical and Thermochemical Properties

The purpose of this report is to provide a review of thermodynamic and thermophysical properties of candidate molten salt coolants, which may be used as a primary coolant within a nuclear reactor or heat transport medium from the Next Generation Nuclear Plant (NGNP) to a processing plant, for example, a hydrogen-production plant. Thermodynamic properties of four types of molten salts, including LiF-BeF2 (67 and 33 mol%, respectively; also known as FLiBe), LiF-NaF-KF (46.5, 11.5, and 52 mol%, also known as FLiNaK), and KCl-MgCl2 (67 and 33 mol%), and sodium nitrate-sodium nitrite-potassium nitrate (NaNO3–NaNO2–KNO3, (7-49-44 or 7-40-53 mol%) have been investigated. Limitations of existing correlations to predict density, viscosity, specific heat capacity, surface tension, and thermal conductivity, were identified. The impact of thermodynamic properties on the heat transfer, especially Nusselt number was also discussed. Stability of the molten salts with structural alloys and their compatibility with the structural alloys was studied. Nickel and alloys with dense Ni coatings are effectively inert to corrosion in fluorides but not so in chlorides. Of the chromium containing alloys, Hastelloy N appears to have the best corrosion resistance in fluorides, while Haynes 230 was most resistant in chloride. In general, alloys with increasing carbon and chromium content are increasingly subject to corrosion by the fluoride salts FLiBe and FLiNaK, due to attack and dissolution of the intergranular chromium carbide. Future research to obtain needed information was identified.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

FLiBe Radiative Heat Transfer

The liquid fluoride salt, FLiBe (2LiF-BeF2), has been proposed as a working fluid for Fluoride-Salt-Cooled High-Temperature Reactor (FHR) due to its desirable heat transport properties at high temperatures (500-700°C) as well as compatibility with graphite and several metals [1]. Due to the 4th power temperature dependence and the high temperature differences present in the various FHR heat exchangers (TCHX, DHX, and CTAH), radiative heat transfer in molten salt FLiBe may be important compared to natural or forced convection. Furthermore, because of the strong coupling between the temperature and velocity profiles, emission and absorption of radiation within the salt may significantly impact the thermal and hydrodynamic behavior of the fluid in the natural circulation systems of FHR. The present work investigates the significance of radiative transfer within the salt on the overall thermal energy conservation equation, and consequently the overall convective and radiative heat transfer coefficient. The purpose is to understand the radiative heat transfer effect on the steady-state energy equation for a moving salt in a 2D channel by computing a total Nusselt number that incorporates both radiation and convection. Moreover, the evolution of the thermal entrance region is of a particular importance because of the high heat transfer coefficients attainable and the effect on the potential onset of various salt physical phenomena, like freezing and supercooling, as well as on the design of the passive decay heat removal systems of FHR, which are mostly buoyancy-driven pipe flow systems.

Derdeyn, Will↗

INL Poster - Juan Barrera Salazar

Generation IV nuclear reactors introduce several advantages and benefits in terms of safety and efficiency when compared with their predecessors from previous generation. This is due, among many things, to the use of innovative forms of fuel and coolant, different from the conventional ones used in the last decades. Given that these upcoming designs utilize emerging technologies, the related instrumentation is also in the process of being developed; therefore, it is necessary to establish the sensitivity requirements and the effects of uncertainty on different properties of the components and elements of the reactor designs. This report presents the results of simulations that quantify the impacts of the uncertainties of four thermophysical properties of the refrigerant salt (LiF-BeF2) for the Kairos Power benchmark model (g-FHR) for steady state making use of the Sobol’ method through polynomial chaos surrogate modeling. The properties of the salt to which uncertainty was evaluated were density, dynamic viscosity, thermal conductivity and heat capacity. This study was carried out using the Griffin/Pronghorn multiphysics model under the computational resources of the Idaho National Laboratory (INL) High Performance Computing (HPC). The results indicate a weak dependence of the uncertainty of thermal conductivity on the quantities of core pressure drop and core outlet temperature.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗

Investigation of impurity driven corrosion behavior in molten 2LiF-BeF 2 salt

A 1000 -h corrosion experiment of 316H stainless steel at 700 °C investigated the role of metal fluoride impurities CrF 2 and FeF 2 in LiF-BeF 2 (66-34 mole %) (FLiBe) salt. Inductively coupled plasma-optical emission spectroscopy (ICP-OES) demonstrated the ability to measure changes in the concentration of these fluorides in FLiBe salt. Cyclic voltammetry (CV) showed the potential for real-time quantitative concentration measurement of corrosion products in the molten salt. Materials characterization revealed that both impurity species influence the dissolution of Cr from the alloy. The collective results from these analysis methods advance the understanding of the influence impurities have on materials corrosion.

2LiF-BeF2↗