Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BaNd”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

An L-Band Brightness Temperature Disaggregation Method Using S-Band Radiometer Data for the Water Cycle Observation Mission (WCOM)

The Water Cycle Observation Mission (WCOM) will build upon previous L and C band passive microwave soil moisture satellite missions. WCOM will consist of a passive microwave synthetic aperture radiometer operating at L, S, and C bands. The WCOM requirements for passive soil moisture are to estimate soil moisture in the top 5 cm of soil layer with an error less than 0.04 cu m/cu m, at 15 km resolution and with a 3-day revisit. A new set of algorithms for these multi-frequency platforms will need to be developed for estimating the data products at the desired resolution. To accomplish this, a brightness temperature (TB) downscaling methodology is developed that uses passive S-band TB (30 km) to downscale L-band TB (50 km) and to estimate soil moisture at a 30 km resolution, based on the linear relationships between the passive signals of L-band and S-band. To test this downscaling method, analysis was performed using PALS data from the Soil Moisture Experiments in 2002 (SMEX02). For this study, 4 km L-band observations were downscaled to 800 m. The root mean square errors (RMSE) between the downscaled TBL at 800m with the observed TBL at 800m are 2.63 K and 1.60 K for H and V polarizations respectively. The results also showed that it was possible to use these disaggregated TB to estimate soil moisture to meet the mission requirement of 0.04 cu m/cu m. These results showed that we can obtain higher resolution soil moisture from L band passive TB with a high accuracy (<0.04 cu m/cu m) by using S-band information.

Disaggregation↗
NASA NTRS1984

Assessment of Thematic Mapper Band-to-band Registration by the Block Correlation Method

The design of the Thematic Mapper (TM) multispectral radiometer makes it susceptible to band-to-band misregistration. To estimate band-to-band misregistration a block correlation method is employed. This method is chosen over other possible techniques (band differencing and flickering) because quantitative results are produced. The method correlates rectangular blocks of pixels from one band against blocks centered on identical pixels from a second band. The block pairs are shifted in pixel increments both vertically and horizontally with respect to each other and the correlation coefficient for each shift position is computed. The displacement corresponding to the maximum correlation is taken as the best estimate of registration error for each block pair. Subpixel shifts are estimated by a bi-quadratic interpolation of the correlation values surrounding the maximum correlation. To obtain statistical summaries for each band combination post processing of the block correlation results performed. The method results in estimates of registration error that are consistent with expectations.

Card, D. H.↗
NASA NTRS1986

Report on holographic tests at S-band and K-band on the DSS-63 64 metre antenna

High resolution holographic tests were carried out on DSS-63 at S-band and K-band during May l985. These tests followed a mechanical retrofit which involved the addition of structural bracing to the backing structure. Geosynchronous satellite beacons were used as sources for the tests. At a resolution of 0.4m the S-band and K-band tests revealed rms deviations of the surface to be 2.73mm and 1.53mm, respectively. The difference between these two results is thought to be due mainly to contamination of the S-band surface error map by expected and generally predictable subreflector diffraction effects. The S-band map is also known to be contaminated by diffraction from the subreflector support struts and has a higher noise level than the K-band map. A list of corrections to be applied to the reflector panels is derived from the K-band map. These corrections are predicted to reduce the rms deviation from 1.53mm to 0.86mm at 0.4m resolution. Comparison with results obtained before the mechanical retrofit suggests the major effect of the added structural bracing to be reduction of a third order deformation of the reflector about its axis.

Godwin, M. P.↗
NASA NTRS1984

Venus banded terrain - Tectonic models for band formation and their relationship to lithospheric thermal structure

Two classes of tectonic models for the formation of band structure on Venus mountain ranges are quantitatively evaluated: folding models and extensional models. The characteristics of banded terrain on Ishtar Terra are reviewed, particularly the evidence for a tectonic origin and such important details of band geometry as the spacing between adjacent bands. The tectonic models are tested against these observed features, and it it shown that both classes of models are possible explanations of banded terrain as long as the outer elastic-brittle layer of the Venus crust is at most a few kilometers thick. A general assessment is given of hypotheses for the origin of banded terrain and of the relationship between mechanical models for band formation and the thermal structure of the Venus lithosphere.

Solomon, S. C.↗
NASA NTRS1993

Spectral imaging of the 3.3 and 11.3 micron emission bands in NGC 1333 - Discovery of spatially separate band emissions

Spectral images in the 3.3 and 11.3 micron IR emission band around the star SVS 3 in NGC 1333 indicate that the two bands have their origin in different locations, rendering them useless in estimates of the sizes of the molecules emitting the bands. This is in keeping with the emission bands' generation by a mixture of variously sized polycyclic aromatic hydrocarbons (PAHs) whose smallest species have been dehydrogenated in the vicinity of SVS 3. Hot bands and overtone/combination bands may account for the 3.4-micron band, rather than molecular side-groups of the PAHs.

Bregman, Jesse↗
NASA NTRS1996

First Results of the TOPSAR C-Band / L-Band Interferometer: Calibration and Differential Penetration

The NASA/JPL TOPSAR instrument recently was extended from a single wavelength C-band dual aperture synthetic aperture radar (SAR) interferometer to include a second wavelength at the L-band. Adding the second wavelength invites comparison of wavelength-diverse effects in topographic mapping of surfaces, with the principal goal of understanding the penetration of the radar signals in vegetation canopies, and determining the inferred topographic height. A first analysis of these data was conducted at two sites. Elkhorn Slough near Monterey, California presented flat, vegetation free terrain required for calibrating the radar interferometer parameters. A second site stretching from San Jose to Santa Cruz, California, which is heavily vegetated, provided the first test case for wavelength diverse penetration studies. Preliminary results show that: (a) the interferometer calibration determined at Elkhorn Slough is extenable to Laurel Quad and gives confidence in the C- and L-band height measurements; (b) Clear differences were observed between the C- and L-band heights associated with vegetation, with the C-band derived topographic heights generally higher than those from L-band. The noise level in the L-band interferometer is presently the limiting factor in penetration studies.

Rosen, Paul A.↗
NASA NTRS2005

Multi-Band and Broad-Band Infrared Detectors Based on III-V Materials for Spectral Imaging Instruments

Quantum well infrared photodetector technology has shown remarkable success by realizing large-format focal plane arrays in both broad-bands and in multi-bands. The spectral response of these detectors based on the III-V material system are tailorable within the mid and long wavelength IR bands (similar to 3-25 mu m) and possibly beyond. Multi-band and broad-band detector arrays have been developed by vertically integrating stacks of multi quantum wells tailored for response in different wavelengths bands. Each detector stack absorbs photons within the specified wavelength band while allowing the transmission other photons, thus efficiently permitting multiband detection. Flexibility in many design parameters of these detectors allows for tuning and tailoring the spectral shape according to application requirements, specifically for spectral imaging instruments.

quantum well devices↗
NASA NTRS1980

Shuttle Ku-band and S-band communications implementation study

Various aspects of the shuttle orbiter S-band network communication system, the S-band payload communication system, and the Ku-band communication system are considered. A method is proposed for obtaining more accurate S-band antenna patterns of the actual shuttle orbiter vehicle during flight because the preliminary antenna patterns using mock-ups are not realistic that they do not include the effects of additional appendages such as wings and tail structures. The Ku-band communication system is discussed especially the TDRS antenna pointing accuracy with respect to the orbiter and the modifications required and resulting performance characteristics of the convolutionally encoded high data rate return link to maintain bit synchronizer lock on the ground. The TDRS user constraints on data bit clock jitter and data asymmetry on unbalanced QPSK with noisy phase references are included. The S-band payload communication system study is outlined including the advantages and experimental results of a peak regulator design built and evaluated by Axiomatrix for the bent-pipe link versus the existing RMS-type regulator. The nominal sweep rate for the deep-space transponder of 250 Hz/s, and effects of phase noise on the performance of a communication system are analyzed.

Dodds, J. G.↗
NASA NTRS1981

A High Resolution Spectroscopic Study of the Nu2 Band of Hydrogen Sulfide and the 1-0 Band of Hydrogen Iodide

A tunable diode laser spectrometer was constructed and used to study: (1) the effects of centrifugal distortion on the transition frequencies and strengths of the nu sub 2 band of H2S, and (2) nuclear quadrupole hyperfine structure in the 1-0 band of HI. A total of 126 line frequencies and 94 line strengths in the nu sub 2 band of H2S were measured. The average accuracy of the line frequency measurements was + or - 0.0016 cm. The line strengths were measured to an average accuracy of about 3 percent. The effect of the finite spectral width of the diode laser on the measurement of line strengths is discussed. The observed H2S line frequencies were fit to Watson's AS and NS reduced Hamiltonian in both the Ir and IIIr coordinate representations in order to determine the best set of rotation distortion constants for the upper state of the nu sub 2 band. Comparisons of the observed line strengths in this band to rigid rotor line strengths are also presented. Nuclear quadrupole hyperfine structure in the low J lines of the 1-0 band of HI was observed. The upper vibrational state nuclear quadrupole coupling constant, determined from the observed splittings, was -1850 MHz + or - 12 MHz or 1.2 percent + or - 0.7 percent larger than the ground state coupling constant.

Strow, L. L.↗
NASA NTRS1981

Band parameters of N2O and CO2 determined by whole band analysis

Whole band analysis, a method of obtaining band parameters from spectra by nonlinear least squares fitting of calculated to observed spectra, has been applied to bands of N2O and CO2. The retrieved N2 broadened widths of the 02(0)00 - 00(0) and 12(0)0 - 00(0)0 bands of N2O suggest that the air broadened widths on the AFGL listing are about 10% high. The intensities and (C-12)(O-16)2 broadened widths of the 20002-00001 and 21102-01101 bands of (C-12)(O-16)(O-18) and the 20002-00001 band of (C-12)(O-16)(O-17) have also been determined.

Hawkins, R. L.↗
NASA NTRS1984

Investigation of TM Band-to-band Registration Using the JSC Registration Processor

The JSC registration processor performs scene-to-scene (or band-to-band) correlation based on edge images. The edge images are derived from a percentage of the edge pixels calculated from the raw scene data, excluding clouds and other extraneous data in the scene. Correlations are performed on patches (blocks) of the edge images, and the correlation peak location in each patch is estimated iteratively to fractional pixel location accuracy. Peak offset locations from all patches over the scene are then considered together, and a variety of tests are made to weed out outliers and other inconsistencies before a distortion model is assumed. Thus, the correlation peak offset locations in each patch indicate quantitatively how well the two TM bands register to each other over that patch of scene data. The average of these offsets indicate the overall accuracies of the band-to-band registration. The registration processor was also used to register one acquisition to another acquisition of multitemporal TM data acquired over the same ground track. Band 4 images from both acquisitions were correlated and an rms error of a fraction of a pixel was routinely obtained.

Yao, S. S.↗
NASA NTRS1984

Propane absorption band intensities and band model parameters from 680 to 1580/cm at 296 and 200 K

Band intensities and profiles have been measured for the propane absorption bands from 680 to 1580/cm at 296 and 200 K. This work was stimulated by the discovery of several propane bands in the spectrum of Titan by the Voyager 1 spacecraft. The low temperature laboratory data show that the bands become narrower and the Q branches of the bands somewhat stronger than they are at room temperature. Random band model parameters were determined over the entire region from the 42 spectra obtained at room temperature.

Giver, L. P.↗
NASA NTRS1993

Infrared radiation parameterizations for the minor CO2 bands and for several CFC bands in the window region

Fast and accurate parameterizations have been developed for the transmission functions of the CO2 9.4- and 10.4-micron bands, as well as the CFC-11, CFC-12, and CFC-22 bands located in the 8-12-micron region. The parameterizations are based on line-by-line calculations of transmission functions for the CO2 bands and on high spectral resolution laboratory measurements of the absorption coefficients for the CFC bands. Also developed are the parameterizations for the H2O transmission functions for the corresponding spectral bands. Compared to the high-resolution calculations, fluxes at the tropopause computed with the parameterizations are accurate to within 10 percent when overlapping of gas absorptions within a band is taken into account. For individual gas absorption, the accuracy is of order 0-2 percent. The climatic effects of these trace gases have been studied using a zonally averaged multilayer energy balance model, which includes seasonal cycles and a simplified deep ocean. With the trace gas abundances taken to follow the Intergovernmental Panel on Climate Change Low Emissions 'B' scenario, the transient response of the surface temperature is simulated for the period 1900-2060.

Kratz, David P.↗
NASA NTRS2015

Validation of S-NPP VIIRS Day-Night Band and M Bands Performance Using Ground Reference Targets of Libya 4 and Dome C

This paper provides methodologies developed and implemented by the NASA VIIRS Calibration Support Team (VCST) to validate the S-NPP VIIRS Day-Night band (DNB) and M bands calibration performance. The Sensor Data Records produced by the Interface Data Processing Segment (IDPS) and NASA Land Product Evaluation and Algorithm Testing Element (PEATE) are acquired nearly nadir overpass for Libya 4 desert and Dome C snow surfaces. In the past 3.5 years, the modulated relative spectral responses (RSR) change with time and lead to 3.8% increase on the DNB sensed solar irradiance and 0.1% or less increases on the M4-M7 bands. After excluding data before April 5th, 2013, IDPS DNB radiance and reflectance data are consistent with Land PEATE data with 0.6% or less difference for Libya 4 site and 2% or less difference for Dome C site. These difference are caused by inconsistent LUTs and algorithms used in calibration. In Libya 4 site, the SCIAMACHY spectral and modulated RSR derived top of atmosphere (TOA) reflectance are compared with Land PEATE TOA reflectance and they indicate a decrease of 1.2% and 1.3%, respectively. The radiance of Land PEATE DNB are compared with the simulated radiance from aggregated M bands (M4, M5, and M7). These data trends match well with 2% or less difference for Libya 4 site and 4% or less difference for Dome C. This study demonstrate the consistent quality of DNB and M bands calibration for Land PEATE products during operational period and for IDPS products after April 5th, 2013.

radiance↗
NASA NTRS1996

Natural Radio Source and Spacecraft Signal Measurements at Ka-Band (32.0 GHz) and X-Band (8.4 GHz) Using a 34-Meter Beam-Waveguide Antenna

From Intro.: NASA'a Deep Space Network (DSN) Technology Program at the Jet Propulsion Laboratory (JPL) is evaluating the use of the Ka-Band frequency allocation band (31.8 GHz to 32.3 GHz) for deep space to Earth telecommunications...This paper addresses the three current Ka-Band and X-Band activities, 1)KaAp, 2)SURSAT-1, and 3)KaBLE-II's upcoming Ka-Band experiments aboard Mars Global Surveyor.

Deep Space Network DSN Ka-Band Ka frequency↗