Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BURNING PROCESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Two Piece Compaction Die Design

Compaction dies used to create europium oxide and tantalum control plates were modeled using ANSYS 11.0. Two-piece designs were considered in order to make the dies easier to assemble than the five-piece dies that were previously used. The two areas of concern were the stresses at the interior corner of the die cavity and the distortion of the cavity wall due to the interference fit between the two pieces and the pressure exerted on the die during the compaction process. A successful die design would have stresses less than the yield stress of the material and a maximum wall distortion on the order of 0.0001 in. Design factors that were investigated include the inner corner radius, the value of the interference fit, the compaction force, the size of the cavity, and the outer radius and geometry of the outer ring. The results show that for the europium oxide die, a 0.01 in. diameter wire can be used to create the cavity, leading to a 0.0055 in. radius corner, if the radial interference fit is 0.003 in. For the tantalum die, the same wire can be used with a radial interference fit of 0.001 in. Also, for the europium oxide die with a 0.003 in. interference fit, it is possible to use a wire with a diameter of 0.006 in. for the wire burning process. Adding a 10% safety factor to the compaction force tends to lead to conservative estimates of the stresses but not for the wall distortion. However, when the 10% safety factor is removed, the wall distortion is not affected enough to discard the design. Finally, regarding the europium oxide die, when the cavity walls are increased by 0.002 in. per side or the outer ring is made to the same geometry as the tantalum die, all the stresses and wall distortions are within the desired range. Thus, the recommendation is to use a 0.006 in. diameter wire and a 0.003 in. interference fit for the europium oxide die and a 0.01 in. diameter wire and a 0.001 in. interference fit for the tantalum die. The dies can also be made to have the same outer geometry if desired.

42 ENGINEERING↗

MULTI-INSTRUMENT X-RAY OBSERVATIONS OF THERMONUCLEAR BURSTS WITH SHORT RECURRENCE TIMES

Type I X-ray bursts from low-mass X-ray binaries result from a thermonuclear runaway in the material accreted onto the neutron star. Although typical recurrence times are a few hours, consistent with theoretical ignition model predictions, there are also observations of bursts occurring as promptly as 10 minutes or less after the previous event. We present a comprehensive assessment of this phenomenon using a catalog of 3387 bursts observed with the BeppoSAX/WFCs and RXTE/PCA X-ray instruments. This catalog contains 136 bursts with recurrence times of less than 1 hr, that come in multiples of up to four events, from 15 sources. Short recurrence times are not observed from the so-called ultra-compact binaries, indicating that hydrogen-burning processes play a crucial role. As far as the neutron star spin frequency is known, these sources all spin fast at over 500 Hz; the rotationally induced mixing may explain burst recurrence times of the order of 10 minutes. Short recurrence time bursts generally occur at all mass accretion rates where normal bursts are observed, but for individual sources the short recurrence times may be restricted to a smaller interval of accretion rate. The fraction of such bursts is roughly 30%. We also report the shortest known recurrence time of 3.8 minutes.

79 ASTRONOMY AND ASTROPHYSICS↗

Spherical flame characteristics of heptane/iso-butanol mixture droplets

Experimental data and detailed numerical modelling are presented on the burning characteristics of a model gasoline/biofuel mixture consisting of n-heptane and iso-butanol. A droplet burning in an environment that minimises the influence of buoyant and forced convective flows in the standard atmosphere is used to promote one-dimensional gas transport to facilitate numerical modelling of the droplet burning process. The numerical model includes a detailed combustion kinetic mechanism, unsteady gas and liquid transport, multicomponent diffusion inside the droplet, variable properties, and non-luminous radiative heat transfer from the flame. The numerical simulation was validated by experimental measurements in the standard atmosphere which showed good agreement with the evolutions of droplet and flame diameters. The iso-butanol concentration had a strong effect on formation of particulates. Above ~20% (volume) iso-butanol, flame luminosity was significantly diminished anddecreased with increasing iso-butanol concentration, while CO2 emissions as a representative greenhouse gas were not strongly influenced by the iso-butanol loading. The soot shell was located near a 1350 K isotherm for concentrations up to 20% (volume) iso-butanol, suggesting this value as a possible soot inception temperature for the mixture droplet. The combustion rate decreased with increasing iso-butanol concentration which was attributed to iso-butanol's higher liquid density. No evidence of a low temperature burning regime, or of extinction, was found (in experiments and simulations) for the small droplet sizes investigated.

Dalili, Alireza↗

Near-zero emissions combustor system for syngas and biofuels

A multi-institutional plasma combustion team was awarded a research project from the DOE/NNSA GIPP (Global Initiative for Prolifereation Prevention) office. The Institute of High Current Electronics (Tomsk, Russia); Leonardo Technologies, Inc. (an American-based industrial partner), in conjunction with the Los Alamos National Laboratory are participating in the project to develop novel plasma assisted combustion technologies. The purpose of this project is to develop prototypes of marketable systems for more stable and cleaner combustion of syngas/biofuels and to demonstrate that this technology can be used for a variety of combustion applications - with a major focus on contemporary gas turbines. In this paper, an overview of the project, along with descriptions of the plasma-based combustors and associated power supplies will be presented. Worldwide, it is recognized that a variety of combustion fuels will be required to meet the needs for supplying gas-turbine engines (electricity generation, propulsion), internal combustion engines (propulsion, transportation), and burners (heat and electricity generation) in the 21st Century. Biofuels and biofuel blends have already been applied to these needs, but experience difficulties in modifications to combustion processes and combustor design and the need for flame stabilization techniques to address current and future environmental and energy-efficiency challenges. In addition, municipal solid waste (MSW) has shown promise as a feedstock for heat and/or electricity-generating plants. However, current combustion techniques that use such fuels have problems with achieving environmentally-acceptable air/exhaust emissions and can also benefit from increased combustion efficiency. This project involves a novel technology (a form of plasma-assisted combustion) that can address the above issues. Plasma-assisted combustion (PAC) is a growing field that is receiving worldwide attention at present. The project is focused on research necessary to develop a novel, high-efficiency, low-emissions (near-zero, or as low as reasonably achievable), advanced combustion technology for electricity and heat production from biofuels and fuels derived from MSW. For any type of combustion technology, including the advanced technology of this project, two problems of special interest must be addressed: developing and optimizing the combustion chambers and the systems for igniting and sustaining the fuel-burning process. For MSW in particular, there are new challenges over gaseous or liquid fuels because solid fuels must be ground into fine particulates ({approx} 10 {micro}m diameter), fed into the advanced combustor, and combusted under plasma-assisted conditions that are quite different than gaseous or liquid fuels. The principal idea of the combustion chamber design is to use so-called reverse vortex gas flow, which allows efficient cooling of the chamber wall and flame stabilization in the central area of the combustor (Tornado chamber). Considerable progress has been made in design ing an advanced, reverse vortex flow combustion chamber for biofuels, although it was not tested on biofuels and a system that could be fully commercialized has never been completed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bayesian estimation of the $S$ factor and thermonuclear reaction rate for 16 O(p, γ) 17 F

The 16 O(p, γ) 17 F reaction is the slowest hydrogen-burning process in the CNO mass region. Its thermonuclear rate sensitively impacts predictions of oxygen isotopic ratios in a number of astrophysical sites, including AGB stars. The reaction has been measured several times at low bombarding energies using a variety of techniques. The most recent evaluated experimental rates have a reported uncertainty of about 7.5% below 1 GK. However, the previous rate estimate represents a best guess only and was not based on rigorous statistical methods. We apply a Bayesian model to fit all reliable 16 O(p, γ) 17 F cross section data, and take into account independent contributions of statistical and systematic uncertainties. The nuclear reaction model employed is a single-particle potential model involving a Woods-Saxon potential for generating the radial bound state wave function. The model has three physical parameters, the radius and diffuseness of the Woods-Saxon potential, and the asymptotic normalization coefficients (ANCs) of the final bound state in 17 F. Here, we find that performing the Bayesian S -factor fit using ANCs as scaling parameters has a distinct advantage over adopting spectroscopic factors instead. Based on these results, we present the first statistically rigorous estimation of experimental 16 O(p, γ) 17 F reaction rates, with uncertainties (±4.2%) of about half the previously reported values.

6 ≤ A ≤ 19↗

Experimental study and demonstration of pilot-scale, dry feed, oxy-coal combustion under pressure

In this paper, we discuss how pressurized oxy-combustion is a promising technology for low-carbon, fossil fuel utilization. It has the potential of improved efficiency and economics compared with conventional atmospheric pressure oxy-combustion. Washington University in St. Louis has proposed a new pressurized oxy-combustion process, namely Staged Pressurized Oxy-Combustion, which has the potential to improve further the plant efficiency, operational flexibility, and economics. This process burns pulverized coal in a pressurized, oxy-combustion environment, which has not been demonstrated in a pilot-scale system before. To address this gap, a 100 kWth pressurized oxy-combustion facility was designed and constructed. This facility has a unique burner and furnace design featuring a co-axial, low-mixing flow field, which is drastically different from conventional coal-fired boiler designs where strong mixing is sought by introducing swirl or recirculating flows. This work aims to present the first pilot-scale experimental results of a dry-feed, pressurized oxy-combustion system. The tests focused on exploring flame stability and shape, char burnout, and fine particulate matter formation. Testing results suggest that the burner has excellent flame stability. The flame shape is consistent with the design philosophy and agrees with large eddy simulations. Importantly, complete char combustion can be achieved with an oxygen mole fraction in the flue gas of only 0.8%, as opposed to a required value of ~3% for conventional atmospheric pressure air-fired or oxyfuel combustion, which reduces the costs of both oxygen generation upstream and oxygen removal downstream. The testing results show promise for dry-feed, pressurized oxy-combustion, and the new burner and furnace design.

01 COAL, LIGNITE, AND PEAT↗

Numerical and experimental studies on effects of moisture content on combustion characteristics of simulated municipal solid wastes in a fixed bed

Highlights: • The effects of moisture content on the burning process of MSW are investigated. • A two-dimensional mathematical model was built to simulate the combustion process. • Temperature distributions, process rates, gas species were measured and simulated. • The The conversion ratio of C/CO and N/NO in MSW are inverse to moisture content. - Abstract: In order to reveal the features of the combustion process in the porous bed of a waste incinerator, a two-dimensional unsteady state model and experimental study were employed to investigate the combustion process in a fixed bed of municipal solid waste (MSW) on the combustion process in a fixed bed reactor. Conservation equations of the waste bed were implemented to describe the incineration process. The gas phase turbulence was modeled using the k–ε turbulent model and the particle phase was modeled using the kinetic theory of granular flow. The rate of moisture evaporation, devolatilization rate, and char burnout was calculated according to the waste property characters. The simulation results were then compared with experimental data for different moisture content of MSW, which shows that the incineration process of waste in the fixed bed is reasonably simulated. The simulation results of solid temperature, gas species and process rate in the bed are accordant with experimental data. Due to the high moisture content of fuel, moisture evaporation consumes a vast amount of heat, and the evaporation takes up most of the combustion time (about 2/3 of the whole combustion process). The whole bed combustion process reduces greatly as MSW moisture content increases. The experimental and simulation results provide direction for design and optimization of the fixed bed of MSW.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energetic ions in ITER plasmas

This paper discusses the behaviour and consequences of the expected populations of energetic ions in ITER plasmas. It begins with a careful analytic and numerical consideration of the stability of Alfvén Eigenmodes in the ITER 15 MA baseline scenario. The stability threshold is determined by balancing the energetic ion drive against the dominant damping mechanisms and it is found that only in the outer half of the plasma (r/a>0.5) can the fast ions overcome the thermal ion Landau damping. This is in spite of the reduced numbers of alpha-particles and beam ions in this region but means that any Alfvén Eigenmode-induced redistribution is not expected to influence the fusion burn process. The influence of energetic ions upon the main global MHD phenomena expected in ITER's primary operating scenarios, including sawteeth, neoclassical tearing modes and Resistive Wall Modes, is also reviewed. Fast ion losses due to the non-axisymmetric fields arising from the finite number of toroidal field coils, the inclusion of ferromagnetic inserts, the presence of test blanket modules containing ferromagnetic material, and the fields created by the Edge Localised Mode (ELM) control coils in ITER are discussed. The greatest losses and associated heat loads onto the plasma facing components arise due to the use of the ELM control coils and come from neutral beam ions that are ionised in the plasma edge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of residual plasma drift velocity on the post-arc sheath expansion of vacuum circuit breakers

The residual plasma in the inter-contact region of a vacuum circuit breaker moves towards the post-arc cathode at current zero, because the residual plasma mainly comes from the cathode spots during the arc burning process. In the most previous theoretical researches on the post-arc sheath expansion process of vacuum circuit breakers, only the thermal motion of residual plasma was taken into consideration. Alternately, the residual plasma was even assumed to be static at the moment of current zero in some simplified models. However, the influence of residual plasma drift velocity at current zero on the post-arc sheath expansion process was rarely investigated. In this paper, this effect is investigated by a one-dimensional particle-in-cell model. Simulation results indicate that the sheath expands slower with higher residual plasma drift velocity in the initial sheath expansion stage. However, with the increase of residual plasma drift velocity, the overall plasma density in the inter-contact region decreases faster, and the sheath expansion velocity increases earlier. Consequently, as a whole, it needs shorter time to expel the residual plasma from the inter-contact region. Furthermore, if the residual plasma drift velocity is high enough, the sheath expansion process ceases before it develops to the post-arc anode. Besides, the influence of the collisions between charges and neutrals is investigated as well in terms of the density of metal vapor. It shows that the residual plasma drift velocity takes remarkable effect only if the density of the metal vapor is relatively low, which corresponds to the circumstance of low-current interruptions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of water molecule isotopomer concentrations in a discharge of inert gas with addition of H{sub 2}O and D{sub 2} vapours by the method of external-cavity diode laser spectroscopy

Discharge plasma in inert gases with added water vapours and deuterium is studied by using the optimised diode laser spectroscopy with an external cavity. Formation of a spectrally dense grid of cavity transverse mode eigenfrequencies allows one to determine the parameters of Doppler broadening for absorption lines, a kinetic temperature of molecules, and their statistical sums. By using these parameters and the value of an absorption coefficient, correlations of concentrations are found for H{sub 2}O and HDO isotopomers at various ratios of plasma-forming gas components. An important contribution of initial gas molecules adsorbed on walls into the formation of plasma composition is stressed. It is found that the ratio of H{sub 2}O and HDO concentrations is the same at various ratios of H{sub 2}O and D{sub 2} concentrations in plasma-forming gases and is constant during the discharge burning process. (laser applications and other topics in quantum electronics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

USING THE X-RAY MORPHOLOGY OF YOUNG SUPERNOVA REMNANTS TO CONSTRAIN EXPLOSION TYPE, EJECTA DISTRIBUTION, AND CHEMICAL MIXING

Supernova remnants (SNRs) are a complex class of sources, and their heterogeneous nature has hindered the characterization of their general observational properties. To overcome this challenge, in this paper, we use statistical tools to analyze the Chandra X-ray images of Galactic and Large Magellanic Cloud SNRs. We apply two techniques, a power-ratio method (a multipole expansion) and wavelet-transform analysis, to measure the global and local morphological properties of the X-ray line and thermal emission in 24 SNRs. We find that Type Ia SNRs have statistically more spherical and mirror-symmetric thermal X-ray emission than core-collapse (CC) SNRs. The ability to type SNRs based on thermal emission morphology alone enables, for the first time, the typing of SNRs with weak X-ray lines and those with low-resolution spectra. Based on our analyses, we identify one source (SNR G344.7-0.1) as originating from a CC explosion that was of unknown origin previously; we also confirm the tentative Type Ia classifications of G337.2-0.7 and G272.2-3.2. Although the global morphology is indicative of the explosion type, the relative morphology of the X-ray line emission within SNRs is not: all sources in our sample have well-mixed ejecta, irrespective of stellar origin. In particular, we find that 90% of the bright metal-line-emitting substructures are spatially coincident and have similar scales, even if the metals arise from different burning processes. Moreover, the overall X-ray line morphologies within each SNR are the same, with <6% differences. These findings reinforce observationally that hydrodynamical instabilities can efficiently mix ejecta in Type Ia and CC SNRs. The only exception is W49B, which can be attributed to its jet-driven/bipolar explosive origin. Based on comparative analyses across our sample, we describe several observational constraints that can be used to test hydrodynamical models of SNR evolution; notably, the filling factor of X-ray emission decreases with SNR age.

79 ASTRONOMY AND ASTROPHYSICS↗

SODIUM-OXYGEN ANTICORRELATION AMONG HORIZONTAL BRANCH STARS IN THE GLOBULAR CLUSTER M4

The horizontal branch (HB) morphology of globular clusters (GCs) is mainly governed by metallicity. The second parameter problem, well known since the 1960s, states that metallicity alone is not enough to describe the observed HB morphology of many GCs. Despite many efforts to resolve this issue, the second parameter phenomenon still remains without a satisfactory explanation. We have analyzed blue-HB, red-HB, and RR-Lyrae stars in the GC M4 and studied their Fe, Na, and O abundances. Our goal is to investigate possible connections between the bimodal HB of M4 and the chemical signatures of the two stellar populations recently discovered among red giants of this cluster. We obtained FLAMES-UVES/GIRAFFE spectra of a sample of 22 stars covering the HB from the red to the blue region. While iron has the same abundance in both the red-HB and blue-HB segments, the red-HB is composed of stars with scaled-solar sodium abundances, while the blue-HB stars are all sodium enhanced and oxygen depleted. The RR-Lyrae are Na-poor, as the red-HB stars, and O-rich. This is what we expect if the blue-HB consists of a second generation of stars formed from the ejecta produced by an earlier stellar population through high-temperature hydrogen-burning processes that include the CNO, NeNa, and MgAl cycles and are therefore expected to be He-rich. According to this scenario, the sodium and oxygen pattern detected in the blue-HB and red-HB segments suggests helium as the second parameter that rules the HB morphology in M4.

79 ASTRONOMY AND ASTROPHYSICS↗

Convective potential and fuel availability complement near-surface weather in regulating global wildfire activity

Wildfires are favored by hot, dry, windy, rainless conditions—this knowledge about fire weather informs both short-term forecast and long-term prediction of wildfire activity. Yet, wildfires rely on the availability of ignition and fuel, which are underrepresented in fire forecast and prediction practices. By analyzing satellite measurements and atmospheric reanalysis, here we show that near-surface weather only partially captures wildfire occurrence and intensity across the daily to seasonal timescales. Beyond near-surface weather, convection and fuel abundance play a complementary role in regulating burning processes. Specifically, enhanced atmospheric convection is identified for over 40% of the low-human-impact regions and 61% of global burnable areas during wildfire ignition and spreading periods. Meanwhile, 56% of shrublands and 54% of grasslands see higher fuel load with actual occurrence of fire. Our results highlight the role of convection and fuel in wildfire forecast, prompting a revisit of wildfire prediction under intertwined atmospheric and terrestrial changes.

54 ENVIRONMENTAL SCIENCES↗

Multi-Dimensional Modeling of Nova with Realistic Nuclear Physics

This contract covered the period from 03/09/2010 to 09/30/2010. Over this period, we adapted the low Mach number hydrodynamics code MAESTRO to perform simulations of novae. A nova is the thermonuclear runaway of an accreted hydrogen layer on the surface of a white dwarf. As the accreted layer grows in mass, the temperature and density at the base increase to the point where hydrogen fusion can begin by the CNO cycle - a burning process that uses carbon, nitrogen, and oxygen to complete the fusion of four hydrogen nuclei into one helium-4 nucleus. At this point, we are running initial models of nova, exploring the details of the convection. In the follow-on contract to this one, we will continue this investigation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Combustion of petroleum-based transportation fuels and their blends with biofuels: a new approach for developing surrogates and understanding the effects of blending

Accurate and versatile reaction mechanisms are necessary to simulate combustion of transportation fuels blended with biofuels for improving fuel efficiency, reducing fuel consumption and mitigating the formation and emissions of combustion products harmful to the atmosphere. This project involved a combined effort of simulation and experimentation of liquid fuel burning using a combustion configuration amenable to numerical modeling with a level of detail not previously achieved for blends of biofuels with gasoline certification and surrogate fuels. The configuration of an isolated droplet burning under conditions where gas transport arises solely from fuel evaporation was selected as the platform for experiments and numerical modeling. The spherical symmetry and one-dimensional gas transport that results enabled simulating the droplet burning process with an precedented level of detail. Processes associated with unsteady gas and liquid transport, formation of particulate and gaseous products, radiation, multicomponent phase equilibrium at the droplet surface and moving boundary effects from droplet evaporation, were incorporated in a single numerical framework. The numerical model was based on the open source code OPENSmoke++ (OS) adapted to incorporate the effects noted above. In addition to simulation, an experimental design was developed for the isolated droplet configuration to acquire the data needed for validating the numerical model. Several broad accomplishments of the project were the following: demonstrating generally excellent agreement between measured and simulated combustion parameters for the fuel blends examined that included mixtures of heptane and isobutanol as a model system, and surrogates comprised of up to seven miscible components mixed with ethanol or isobutanol as representative biofuel additives; using a new approach to validate reaction mechanisms of biofuel blends which incorporated fuel evaporation into the process along with developing an experimental design for acquiring data to compare with simulations; and showing that a wealth of information could be obtained on the combustion physics of biofuels from experiments requiring volumes on the order of only nanoliters at a time thus opening the way to evaluating biofuels synthesized by new processes early in development.

02 PETROLEUM↗

The Exposure Rate Conversion Factor for Nuclear Fallout

Nuclear fallout is comprised of approximately 2000 radionuclides. About 1000 of these radionuclides are either primary fission products or activated fission products that are created during the burn process. The exposure rate one meter above the surface produced by this complex mixture of radionuclides varies rapidly with time since many of the radionuclides are short-lived and decay numerous times before reaching a stable isotope. As a result, the mixture of radionuclides changes rapidly with time. Using a new code developed at the Lawrence Livermore National Laboratory, the mixture of radionuclides at any given point in time can be calculated. The code also calculates the exposure rate conversion factor (ECF) for all 3864 individual isotopes contained in its database based on the total gamma energy released per decay. Based on the combination of isotope mixture and individual ECFs, the time-dependent variation of the composite exposure rate conversion factor for nuclear fallout can be easily calculated. As example of this new capability, a simple test case corresponding to a 10 kt, uranium-plutonium fuel has been calculated. The results for the time-dependent, composite ECF for this test case are shown in Figure 1. For comparison, we also calculated the composite exposure rate conversion factor using the conversion factors found in Federal Guidance Report No.12 (FGR-12) published by ORNL, which contains the conversion factors for approximately 1000 isotopes. As can be noted from Figure 1, the two functions agree reasonably well at times greater than about 30 minutes. However, they do not agree at early times since FGR-12 does not include all of the short-lived isotopes that are produced in nuclear fallout. It should also be noted that the composite ECF at one hour is 19.7 R/hr per Ci/m{sup 2}. This corresponds to 3148 R/hr per 1 kt per square mile, which agrees reasonably well with the value of 3000 R/hr per 1 kt per square mile as quoted by Glasstone. We have also tabulated the top 50 contributors to the exposure rate at various points in time following a detonation. These major contributors are given in Table 1.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

A luminous peculiar type IA supernova SN 2011HR: More like SN 1991T or SN 2007if?

Photometric and spectroscopic observations of a slowly declining, luminous Type Ia supernova (SN Ia) SN 2011hr in the starburst galaxy NGC 2691 are presented. SN 2011hr is found to peak at M{sub B} = −19.84±0.40 mag, with a postmaximum decline rate Δm{sub 15}(B) = 0.92 ± 0.03 mag. From the maximum-light bolometric luminosity, L = (2.30±0.90)×10{sup 43} erg s{sup −1}, we estimate the mass of synthesized {sup 56}Ni in SN 2011hr to be M({sup 56}Ni) = 1.11±0.43 M{sub ⊙}. SN 2011hr appears more luminous than SN 1991T at around maximum light, and the absorption features from its intermediate-mass elements (IMEs) are noticeably weaker than those of the latter at similar phases. Spectral modeling suggests that SN 2011hr has IMEs of ∼0.07 M{sub ⊙} in the outer ejecta, which is much lower than the typical value of normal SNe Ia (i.e., 0.3–0.4 M{sub ⊙}) and is also lower than the value of SN 1991T (i.e., ∼0.18 M{sub ⊙}). These results indicate that SN 2011hr may arise from a Chandrasekhar-mass white dwarf progenitor that experienced a more efficient burning process in the explosion. Nevertheless, it is still possible that SN 2011hr may serve as a transitional object connecting the SN 1991T-like SNe Ia with a superluminous subclass like SN 2007if given that the latter also shows very weak IMEs at all phases.

79 ASTRONOMY AND ASTROPHYSICS↗

Sub-sonic thermal explosions investigated by radiography

This paper reviews the past 5 years of experiments utilizing radiographic techniques to study defiagration in thermal explosions in HMX based formulations. Details of triggering and timing synchronization are given. Radiographic images collected using both protons and x-rays are presented. Comparisons of experiments with varying size, case confinement, binder, and synchronization are presented. Techniques for quantifying the data in the images are presented and a mechanism for post-ignition burn propagation in a thermal explosion is discussed. From these experiments, we have observed a mechanism for sub-sonic defiagration with both gas phase convective and solid phase conductive burning. The convective front velocity is directly measured from the radiographic images and consumes only a small fraction of the HE. It lights the HE as it passes beginning the slower solid state conductive burn process. This mechanism is used to create a model to simulate the radiographic results and a comparison will be shown.

36 MATERIALS SCIENCE↗