Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Astroparticle physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Low-energy calibration of SuperCDMS HVeV cryogenic silicon calorimeters using Compton steps

Cryogenic calorimeters for low-mass dark matter searches have achieved sub-eV energy resolutions, driving advances in both low-energy calibration techniques and our understanding of detector physics. The energy deposition spectrum of gamma rays scattering off target materials exhibits step-like features, known as Compton steps, near the binding energies of atomic electrons. Here, we demonstrate a successful use of Compton steps for sub-keV calibration of cryogenic silicon calorimeters, utilizing four SuperCDMS High-Voltage eV-resolution detectors operated with 0 V bias across the crystal. This new calibration at 0 V is compared with the established high-voltage calibration using optical photons. The comparison indicates that the detector response at 0 V is about 30% weaker than expected, highlighting challenges in detector response modeling for low-mass dark matter searches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Stacked reverberation mapping of high-redshift quasars in DESI. I. Feasibility analysis

The broad-line region of quasars has long been probed by reverberation mapping techniques that measure time lags between continuum and broad emission-line variations. Stacked reverberation mapping has been proposed as a less observationally expensive alternative to traditional methods. This ensemble approach also reduces biases from small-number statistics. The Dark Energy Spectroscopic Instrument (DESI) is conducting the most extensive spectroscopic survey of quasars to date. We create mock light curves emulating expected DESI quasar observations at redshifts $1.48\lt z\lt 5.2$ and luminosities $44.68 \le \log \lambda L_{1350 \mathring{\rm A}{}} / \mathrm{erg\, s^{-1}} \le 45.99$ to test stacked reverberation mapping feasibility using sparse spectroscopic data paired with well-sampled photometric data. The pipeline, using the lag estimation code JAVELIN (Just Another Vehicle for Estimating Lags In Nuclei), successfully recovers the simulated C IV lags within 1σ of the true values using spectroscopic light curves composed of only a few spectral epochs (2–10) with irregular cadences. We investigate how observational factors, including C IV flux error magnitude, number of stacked quasars, and spectral epoch count, affect performance. This work motivates a pathway for future stacked reverberation mapping projects with large-scale spectroscopic surveys of quasars having $\ge 2$ spectroscopic observations. Our results suggest an economical alternative for constraining and extending the radius–luminosity relation to higher redshifts and luminosities. Subsequently, this relation can be employed more reliably in single-epoch black hole mass measurements and quasar cosmology in these distant regimes.

quasars: general, quasars: supermassive black hole↗
DOE OSTI2026

Cosmological constraints from a joint DESI DR1 Full-Shape and DR2 BAO

We present a cosmological analysis combining full-shape (FS) clustering measurements from the Dark Energy Spectroscopic Instrument (DESI) DR1 with baryon acoustic oscillation (BAO) measurements from DESI DR2. To achieve a robust combination that accounts for the correlation between the two data releases, we employ the ShapeFit compression method and estimate the joint covariance using EZmocks. This compressed approach inherently mitigates the prior volume effects that have previously dominated Bayesian constraints from DESI data with minimal external priors. Consequently, we obtain — for the first time within a Bayesian framework — reliable DESI-only constraints on extensions to ΛCDM using only a Big Bang Nucleosynthesis prior on the baryon density and a wide prior on the spectral index. In flat ΛCDM, we find Ω m = 0.3035 ± 0.0085, h = 0.6876 ± 0.0059, and σ 8 = 0.822 ± 0.034. For the w 0 w a CDM dynamical dark energy model, we measure w 0 = -0.49 ± 0.25 and w a = -1.52 ± 0.77, improving constraints by ∼ 30% relative to the analogous DR1 measurement and reducing the discrepancy with ΛCDM to 1.4σ when compared to BAO only analyses. We also report competitive limits on the sum of neutrino masses and spatial curvature. This work demonstrates that the ShapeFit compression provides a prior-robust and computationally efficient pathway to constrain beyond-ΛCDM physics with large-scale structure.

baryon acoustic oscillations↗
DOE OSTI2025

Modelling the impact of quasar redshift errors on the full-shape analysis of correlations in the Lyman-α forest.

In preparation for the first cosmological measurements from the full shape of the Lyman-α (Lyα) forest from DESI, we must carefully model all relevant systematics that might bias our analysis. It was shown in Youles et al. (2022) that random quasar redshift errors produce a smoothing effect on the mean quasar continuum in the Lyα forest region. This, in turn, gives rise to spurious features in the Lyα autocorrelation and its cross-correlation with quasars. Using synthetic data sets based on the DESI survey, we confirm that the impact on BAO measurements is small, but that a bias is introduced to parameters which depend on the full shape of our correlations. We combine a model of this contamination in the cross-correlation (Youles et al. 2022) with a new model we introduce here for the auto-correlation. These are parametrised by 3 parameters, which, when included in a joint fit to both correlation functions, successfully eliminate any impact of redshift errors on our full-shape constraints. We also present a strategy for removing this contamination from real data, by removing ∼0.3% of correlating pairs.

cosmology↗
DOE OSTI2026

DESI DR2 Galaxy luminosity functions

We present galaxy luminosity functions (LFs) for the Dark Energy Spectroscopic Instrument (DESI) DR2 Bright Galaxy Survey (BGS) in the g, r, z, and $w1$ bands over $0.002\lt z\lt 0.6$. Our analysis uses updated k-corrections and evolutionary corrections, including new polynomial kcorrection fits derived from BGS Year 1 data that supersede earlier GAMA-based prescriptions. Exploiting the statistical power of DESI, we measure LFs to very faint magnitudes, reaching $^{0.1}M_r-5\log h\sim -10$. Independent measurements from the North and South survey regions show excellent agreement around the LF knee, but the very small statistical uncertainties reveal that simple analytic forms fail to capture the full LF shape. The bright end departs from a pure exponential decline, while the faint end exhibits complex, non-powerlaw behaviour, including a pronounced upturn at $^{0.1}M_r-5\log h\gtrsim -15$, which is stronger for red galaxies than for blue. We show that our LFs are largely complete for galaxies with surface brightness $\mu _{50}\lt 25$, and that an apparent steepening fainter than $-13$ is driven primarily by local overdensity and fragmentation of large galaxies. A systematic North–South offset at the brightest magnitudes is traced to red galaxies and may reflect shallower North photometry underestimating extended earlytype profiles, although this remains inconclusive. We therefore also provide LFs based on model Petrosian magnitudes. Redshift splitting reveals small but significant residuals, indicating limitations of a simple global evolutionary model. Using the redshift limits of J. Loveday et al. (2012), we find excellent agreement with GAMA, with substantially reduced statistical errors. These measurements provide a precise reference for studies of environmental and population-dependent LFs and for testing galaxy formation models.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Measurement of the mean number of muons with energies above 500 GeV in air showers detected with the IceCube Neutrino Observatory

We present a measurement of the mean number of muons with energies larger than 500 GeV in near-vertical extensive air showers initiated by cosmic rays with primary energies between 2.5 and 100 PeV. The measurement is based on events detected in coincidence between the surface and in-ice detectors of the IceCube Neutrino Observatory. Air showers are recorded on the surface by IceTop, while a bundle of high-energy muons (TeV muons) from the shower can subsequently produce a tracklike event in the IceCube in-ice array. Results are obtained assuming the hadronic interaction models Sibyll 2.1, QGSJet-II.04, and EPOS-LHC. The measured number of TeV muons is found to be in agreement with predictions from air-shower simulations. The results have also been compared to a measurement of low-energy muons by IceTop, indicating an inconsistency between the predictions for low- and high-energy muons in simulations based on the EPOS-LHC model.

Abbasi, R. [Loyola University Chicago]↗
DOE OSTI2026

Evidence for a Spectral Break or Curvature in the Spectrum of Astrophysical Neutrinos from 5 TeV to 10 PeV

Here, we report improved measurements of the all flavor astrophysical neutrino spectrum with IceCube by combining complementary neutrino samples in two independent analyses. Both analyses show evidence of a harder spectrum at energies below ∼ 30 TeV compared to higher energies where the spectrum is well characterized by a power law. The spectrum is better described by a log parabola or a broken power law, the latter being the preferred model. Both, however, reject a single power law over an energy range 5 TeV–10 PeV with a significance > 4⁢𝜎, providing new constraints on properties of cosmic neutrino sources.

Abbasi, R. [Loyola University Chicago] (ORCID:0000↗
DOE OSTI2025

Measurement of ω meson production in pp collisions at $\sqrt{s}$ = 13 TeV

The p T -differential cross section of ω meson production in pp collisions at $\sqrt{s}$ =13 TeV at midrapidity (|y| < 0.5) was measured with the ALICE detector at the LHC, covering an unprecedented transverse-momentum range of 1.6 < p T < 50 GeV/c. The meson is reconstructed via the ω → π + π − π 0 decay channel. The results are compared with various theoretical calculations: PYTHIA8.2 with the Monash 2013 tune overestimates the data by up to 50%, whereas good agreement is observed with Next-to-Leading Order (NLO) calculations incorporating ω fragmentation using a broken SU(3) model. The ω/π 0 ratio is presented and compared with theoretical calculations and the available measurements at lower collision energies. The presented data triples the p T ranges of previously available measurements. A constant ratio of C ω/π0 = 0.578 ± 0.006 (stat.) ± 0.013 (syst.) is found above a transverse momentum of 4 GeV/c, which is in agreement with previous findings at lower collision energies within the systematic and statistical uncertainties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Particle production as a function of charged-particle flattenicity in 𝑝⁢𝑝 collisions at $\sqrt{s}$ = 13 TeV

This paper reports the first measurement of the transverse momentum (𝑝 T ) spectra of primary charged pions, kaons, (anti)protons, and unidentified particles as a function of the charged-particle flattenicity in pp collisions at $\sqrt{s}$ =13 TeV. Flattenicity is a novel event shape observable that is measured in the pseudorapidity intervals covered by the V0 detector, 2.8 < 𝜂 < 5.1 and −3.7 < 𝜂 < −1.7. According to QCD-inspired phenomenological models, it shows sensitivity to multiparton interactions and is less affected by biases toward larger 𝑝 T due to local multiplicity fluctuations in the V0 acceptance than multiplicity. The analysis is performed in minimum-bias (MB) as well as in high-multiplicity events up to 𝑝 T = 20 GeV/⁢𝑐. The event selection requires at least one charged particle produced in the pseudorapidity interval |𝜂| < 1. The measured 𝑝 T distributions, average 𝑝 T , kaon-to-pion and proton-to-pion particle ratios, presented in this paper, are compared to model calculations using pythia 8 based on color strings and EPOS LHC. The modification of the 𝑝 T -spectral shapes in low-flattenicity events that have large event activity with respect to those measured in MB events develops a pronounced peak at intermediate 𝑝 T (2 < 𝑝 T < 8 GeV/𝑐), and approaches the vicinity of unity at higher 𝑝 T . The results are qualitatively described by pythia, and they show different behavior than those measured as a function of charged-particle multiplicity based on the V0M estimator.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Measurement of the production cross section of prompt $\Xi ^0_{\textrm{c}}$ baryons in p–Pb collisions at $\sqrt{s_{{\textrm{NN}}}}=5.02$ TeV

The transverse momentum (p T ) differential production cross section of the promptly produced charm-strange baryon $\Xi ^0_{\textrm{c}}$ (and its charge conjugate $\Xi ^0_{\textrm{c}}$) is measured at midrapidity via its hadronic decay into π + $\Xi$ – in p–Pb collisions at a centre-of-mass energy per nucleon–nucleon collision $\sqrt{s_{{\textrm{NN}}}}=5.02$ TeV with the ALICE detector at the LHC. The $\Xi ^0_{\textrm{c}}$ nuclear modification factor (R pPb ), calculated from the cross sections in pp and p–Pb collisions, is presented and compared with the R pPb of Λ$^{+}_{c}$ baryons. The ratios between the p T -differential production cross section of $\Xi ^0_{\textrm{c}}$ baryons and those of D 0 mesons and Λ$^{+}_{c}$ baryons are also reported and compared with results at forward and backward rapidity from the LHCb Collaboration. The measurements of the production cross section of prompt $\Xi ^0_{\textrm{c}}$ baryons are compared with a model based on perturbative QCD calculations of charm-quark production cross sections, which includes only cold nuclear matter effects in p–Pb collisions, and underestimates the measurement by a factor of about 50. This discrepancy is reduced when the data is compared with a model that includes string formation beyond leading-colour approximation or in which hadronisation is implemented via quark coalescence. The p T -integrated cross section of prompt $\Xi ^0_{\textrm{c}}$-baryon production at midrapidity extrapolated down to p T = 0 is also reported. These measurements offer insights and constraints for theoretical calculations of the hadronisation process. Additionally, they provide inputs for the calculation of the charm production cross section in p–Pb collisions at midrapidity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

The role of charm and unflavored mesons in prompt atmospheric lepton fluxes

The all-sky very-high-energy (10 4 − 10 6 GeV) atmospheric muon flux measured by IceCube shows a spectral hardening at the highest energies, indicating the presence of a prompt component. IceCube has also measured the atmospheric muon neutrino flux at high energy. However, since this flux is dominated by astrophysical neutrinos, only an upper bound can be placed on the prompt atmospheric ν μ + $\overline{ν}$ μ contribution. In this work, we provide a new evaluation of the prompt atmospheric muon flux including an intrinsic charm component in the cosmic ray-air interactions. The latter enhances the forward production of $\overline{D}$ 0 , D – and Λc, which subsequently decay into final states containing muons and muon neutrinos. We show how the increase in the prompt muon flux due to intrinsic charm is accompanied by a corresponding enhancement in the prompt muon neutrino flux. We implement different intrinsic charm production models in MCEq to calculate the resulting lepton fluxes. We discuss the challenges of achieving predictions that are simultaneously consistent with both IceCube’s high-energy atmospheric muon flux measurements and IceCube upper bounds on the prompt muon neutrino flux, and we quantify the resulting discrepancies. As possible solutions, we explore scaling of the unflavored meson contributions to the prompt atmospheric muon flux to assess how such adjustments can reconcile these differences. The tensions emphasized in our work call for a refinement of the hadronic interaction models, especially the production of unflavored mesons, and for new experimental data sensitive to unflavored meson and heavy flavor production with reliable estimates of the associated uncertainties. We suggest that the energy and zenith angle dependence of muon and neutrino flux ratios from future neutrino telescope measurements may help to disentangle different scenarios.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Performance of the CMS high-level trigger during LHC Run 2

The CERN LHC provided proton and heavy ion collisions during its Run 2 operation period from 2015 to 2018. Proton-proton collisions reached a peak instantaneous luminosity of 2.1 $\times$ 10$^{34}$ cm$^{-2}$s$^{-1}$, twice the initial design value, at $\sqrt{s}$ = 13 TeV. The CMS experiment records a subset of the collisions for further processing as part of its online selection of data for physics analyses, using a two-level trigger system: the Level-1 trigger, implemented in custom-designed electronics, and the high-level trigger, a streamlined version of the offline reconstruction software running on a large computer farm. This paper presents the performance of the CMS high-level trigger system during LHC Run 2 for physics objects, such as leptons, jets, and missing transverse momentum, which meet the broad needs of the CMS physics program and the challenge of the evolving LHC and detector conditions. Sophisticated algorithms that were originally used in offline reconstruction were deployed online. Highlights include a machine-learning b tagging algorithm and a reconstruction algorithm for tau leptons that decay hadronically.

high energy physics↗
DOE OSTI2024

Performance of the CMS high-level trigger during LHC Run 2

The CERN LHC provided proton and heavy ion collisions during its Run 2 operation period from 2015 to 2018. Proton-proton collisions reached a peak instantaneous luminosity of 2.1× 10 34 cm -2 s -1 , twice the initial design value, at √(s)=13 TeV. The CMS experiment records a subset of the collisions for further processing as part of its online selection of data for physics analyses, using a two-level trigger system: the Level-1 trigger, implemented in custom-designed electronics, and the high-level trigger, a streamlined version of the offline reconstruction software running on a large computer farm. This paper presents the performance of the CMS high-level trigger system during LHC Run 2 for physics objects, such as leptons, jets, and missing transverse momentum, which meet the broad needs of the CMS physics program and the challenge of the evolving LHC and detector conditions. Sophisticated algorithms that were originally used in offline reconstruction were deployed online. Highlights include a machine-learning b tagging algorithm and a reconstruction algorithm for tau leptons that decay hadronically.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Development of the CMS detector for the CERN LHC Run 3

Since the initial data taking of the CERN LHC, the CMSexperiment has undergone substantial upgrades and improvements. Thispaper discusses the CMS detector as it is configured for the thirddata-taking period of the CERN LHC, Run 3, which started in2022. The entire silicon pixel tracking detector was replaced. A newpowering system for the superconducting solenoid was installed. Theelectronics of the hadron calorimeter was upgraded. All the muonelectronic systems were upgraded, and new muon detector stationswere added, including a gas electron multiplier detector. Theprecision proton spectrometer was upgraded. The dedicated luminositydetectors and the beam loss monitor were refurbished. Substantialimprovements to the trigger, data acquisition, software, andcomputing systems were also implemented, including a new hybridCPU/GPU farm for the high-level trigger.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

The ATLAS experiment at the CERN Large Hadron Collider: a description of the detector configuration for Run 3

The ATLAS detector is installed in its experimental cavern at Point 1 of the CERN Large Hadron Collider. During Run 2 of the LHC, a luminosity of ℒ = 2 × 10 34 cm -2 s -1 was routinely achieved at the start of fills, twice the design luminosity. For Run 3, accelerator improvements, notably luminosity levelling, allow sustained running at an instantaneous luminosity of ℒ = 2 × 10 34 cm -2 s -1 , with an average of up to 60 interactions per bunch crossing. The ATLAS detector has been upgraded to recover Run 1 single-lepton trigger thresholds while operating comfortably under Run 3 sustained pileup conditions. A fourth pixel layer 3.3 cm from the beam axis was added before Run 2 to improve vertex reconstruction and b-tagging performance. New Liquid Argon Calorimeter digital trigger electronics, with corresponding upgrades to the Trigger and Data Acquisition system, take advantage of a factor of 10 finer granularity to improve triggering on electrons, photons, taus, and hadronic signatures through increased pileup rejection. The inner muon endcap wheels were replaced by New Small Wheels with Micromegas and small-strip Thin Gap Chamber detectors, providing both precision tracking and Level-1 Muon trigger functionality. Trigger coverage of the inner barrel muon layer near one endcap region was augmented with modules integrating new thin-gap resistive plate chambers and smaller-diameter drift-tube chambers. Tile Calorimeter scintillation counters were added to improve electron energy resolution and background rejection. Upgrades to Minimum Bias Trigger Scintillators and Forward Detectors improve luminosity monitoring and enable total proton-proton cross section, diffractive physics, and heavy ion measurements. These upgrades are all compatible with operation in the much harsher environment anticipated after the High-Luminosity upgrade of the LHC and are the first steps towards preparing ATLAS for the High-Luminosity upgrade of the LHC. This paper describes the Run 3 configuration of the ATLAS detector.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Higgs Inflation and the Electroweak Gauge Sector

Abstract We introduce a method that allows the Higgs to be the inflaton. The Higgs is considered as a pseudo‐Nambu‐Goldstone (pNG) boson of a global coset symmetry , which is spontaneously breaks at an energy scale . A suitable Chern−Simons (CS) interaction is given to it, with representing the dimensionless CS coupling strength and an decay constant. As a result, slow‐roll inflation occurs via ‐induced friction down a steep sinusoidal potential. To obey electroweak symmetry, the lowest‐order CS interaction is required to be quadratic in the Higgs, with the coupling strength . Higher‐order interaction terms keep the full Lagrangian nearly invariant under the approximate pNG shift symmetry. Employing the simplest symmetry coset , ‐folds of inflation occur when . Successfully explaining inflation necessitates small values of the decay constant, ; this in turn requires large , which is ruled out by electric dipole measurements. Although the electroweak hierarchy problem while achieving successful inflation, the real benefit is found in providing a different path to identifying the Higgs as the inflaton, outside the standard modified‐gravity framework.

Alexander, Stephon [Brown Center for Theoretical P↗
DOE OSTI2024

Performance of CMS muon reconstruction from proton-proton to heavy ion collisions

The performance of muon tracking, identification, triggering, momentum resolution, and momentum scale has been studied with the CMS detector at the LHC using data collected at √(s$_{NN}$) = 5.02 TeV in proton-proton (pp) and lead-lead(PbPb) collisions in 2017 and 2018, respectively, and at √(s$_{NN}$) = 8.16 TeV in proton-lead (pPb) collisions in 2016. Muon efficiencies, momentum resolutions, and momentum scales are compared by focusing on how the muon reconstruction performance varies from relatively small occupancy pp collisions to the larger occupancies of pPb collisions and, finally, to the highest track multiplicity PbPb collisions. We find the efficiencies of muon tracking, identification, and triggering to be above 90% throughout most of the track multiplicity range. The momentum resolution and scale are unaffected by the detector occupancy. The excellent muon reconstruction of the CMS detector enables precision studies across all available collision systems.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

The track-length extension fitting algorithm for energy measurement of interacting particles in liquid argon TPCs and its performance with ProtoDUNE-SP data

This paper introduces a novel track-length extension fitting algorithm for measuring the kinetic energies of inelastically interacting particles in liquid argon time projection chambers (LArTPCs). The algorithm finds the most probable offset in track length for a track-like object by comparing the measured ionization density as a function of position with a theoretical prediction of the energy loss as a function of the energy, including models of electron recombination and detector response. The algorithm can be used to measure the energies of particles that interact before they stop, such as charged pions that are absorbed by argon nuclei. The algorithm's energy measurement resolutions and fractional biases are presented as functions of particle kinetic energy and number of track hits using samples of stopping secondary charged pions in data collected by the ProtoDUNE-SP detector, and also in a detailed simulation. Additional studies describe the impact of the dE/dx model on energy measurement performance. The method described in this paper to characterize the energy measurement performance can be repeated in any LArTPC experiment using stopping secondary charged pions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗