Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Antiferroelectricity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

New examples of ferroelectric nematic materials showing evidence for the antiferroelectric smectic-Z phase

Abstract We present a new ferroelectric nematic material, 4-((4′-((trans)-5-ethyloxan-2-yl)-2′,3,5,6′-tetrafluoro-[1,1′-biphenyl]-4-yl)difluoromethoxy)-2,6-difluorobenzonitrile (AUUQU-2-N) and its higher homologues, the molecular structures of which include fluorinated building blocks, an oxane ring, and a terminal cyano group, all contributing to a large molecular dipole moment of about 12.5 D. We observed that AUUQU-2-N has three distinct liquid crystal phases, two of which were found to be polar phases with a spontaneous electric polarization P s of up to 6 µC cm –2 . The highest temperature phase is a common enantiotropic nematic (N) exhibiting only field-induced polarization. The lowest-temperature, monotropic phase proved to be a new example of the ferroelectric nematic phase (N F ), evidenced by a single-peak polarization reversal current response, a giant imaginary dielectric permittivity on the order of 10 3 , and the absence of any smectic layer X-ray diffraction peaks. The ordinary nematic phase N and the ferroelectric nematic phase N F are separated by an antiferroelectric liquid crystal phase which has low permittivity and a polarization reversal current exhibiting a characteristic double-peak response. In the polarizing light microscope, this antiferroelectric phase shows characteristic zig-zag defects, evidence of a layered structure. These observations suggest that this is another example of the recently discovered smectic Z A (SmZ A ) phase, having smectic layers with the molecular director parallel to the layer planes. The diffraction peaks from the smectic layering have not been observed to date but detailed 2D X-ray studies indicate the presence of additional short-range structures including smectic C-type correlations in all three phases—N, SmZ A and N F —which may shed new light on the understanding of polar and antipolar order in these phases.

36 MATERIALS SCIENCE↗

Electronic structure orientation as a map of in-plane antiferroelectricity in β'-In 2 Se 3

Antiferroelectric (AFE) materials are excellent candidates for sensors, capacitors, and data storage due to their electrical switchability and high-energy storage capacity. However, imaging the nanoscale landscape of AFE domains is notoriously inaccessible, which has hindered development and intentional tuning of AFE materials. Here, we demonstrate that polarization-dependent photoemission electron microscopy can resolve the arrangement and orientation of in-plane AFE domains on the nanoscale, despite the absence of a net lattice polarization. Through direct determination of electronic transition orientations and analysis of domain boundary constraints, we establish that antiferroelectricity in β'-In 2 Se 3 is a robust property from the scale of tens of nanometers to tens of micrometers. Ultimately, the method for imaging AFE domain organization presented here opens the door to investigations of the influence of domain formation and orientation on charge transport and dynamics.

36 MATERIALS SCIENCE↗

A combined theoretical and experimental study of the phase coexistence and morphotropic boundaries in ferroelectric-antiferroelectric-antiferrodistortive multiferroics

The physical nature of the ferroelectric (FE), ferrielectric (FEI) and antiferroelectric (AFE) phases, their coexistence and spatial distributions underpins the functionality of antiferrodistortive (AFD) multiferroics in the vicinity of morphotropic phase transitions. In this work, using Landau-Ginzburg-Devonshire (LGD) phenomenology and a semi-microscopic four sublattice model (FSM), we explore the behavior of different AFE, FEI, and FE long-range orderings and their coexistence at the morphotropic phase boundaries in FE-AFE-AFD multiferroics. These theoretical predictions are compared with the experimental observations for dense Bi 1-y R y FeO 3 ceramics, where R is Sm or La atoms with the fraction 0 ≤ y ≤ 0.25, as confirmed by the X-ray diffraction (XRD) and Piezoresponse Force Microscopy (PFM). These complementary measurements were used to study the macroscopic and nanoscopic transformation of the crystal structure with doping. The comparison of the measured and calculated AFE/FE phase fractions demonstrate that the LGD-FSM approach well describes the experimental results obtained by XRD and PFM for Bi 1-y R y FeO 3 . Hence, this combined theoretical and experimental approach provides further insight into the origin of the morphotropic boundaries and coexisting FE and AFE states in model rare-earth doped multiferroics.

36 MATERIALS SCIENCE↗

Correlating hidden local structural distortion with antiferroelectric-ferroelectric transition in PbZrO 3 -based perovskites

Externally stimulated antiferroelectric-ferroelectric (AFE-FE) transition makes AFE materials attractive for many applications ranging from energy storage to sensing. This transition-mediated macroscopic electrical characteristics have been extensively investigated, yet the underlying structural evolution remains poorly understood. Herein, we study the local- and long-range structural evolutions in the Nb-doped Pb(Zr,Sn,Ti)O 3 perovskites by in-situ X-ray total scattering and diffraction, which show three different types of AFE-FE transitions. The evolution of long-range structure from diffraction and local structure identified by atomic pair distribution function (PDF) are consistent well with the phase transition behavior indicated by macroscopic polarization/strain measurements, while discrepancies exist. Interestingly, frequently employed long-range structure picture that the uniform AFE pseudo-tetragonal to FE rhombohedral transformation is insufficient to understand the distinct composition-dependent AFE-FE transition behaviours. Instead, the reversibility of this transition correlates with the chemically sensitive local atomic displacements revealed by newly developed in-situ PDF. The critical electric field of transition is associated with the local structural differences between the AFE and FE state. The macroscopic electrostrains can be well estimated by the phase transition associated lattice strain and domain alignment from in-situ synchrotron XRD data, while the local strains calculated from in-situ PDFs are found to be much lower. Finally, these results provide a fresh insight into the AFE-FE transition, and advance the understanding of structure-property relationships in AFE materials.

36 MATERIALS SCIENCE↗

Atomic structural mechanism for ferroelectric-antiferroelectric transformation in perovskite NaNbO 3

Sodium niobate (NaNbO 3 or NN) is described as “the most complex perovskite system,” which exhibits transitions between, as well as coexistence of, several ferroelectrics (FE) and antiferroelectric (AFE) phases at different temperatures. Recently, solid solutions of NN with stabilized AFE phases(s) have gained attention for energy-related applications, such as high-density energy storage and electrocaloric cooling. A better understanding of the atomic mechanisms responsible for AFE/FE phase transitions in NaNbO 3 can enable a more rational design of its solid-solution systems with tunable functional properties. In this work, we have investigated changes in the average and local atomic structure of NN using a combination of x-ray/neutron diffraction and neutron pair-distribution function (PDF) analyses. The Rietveld refinement of the x-ray/neutron-diffraction patterns indicates a coexistence of the FE Q (P2 1 ma) and AFE P (Pbma) phases in the temperature range of 300 K ≤ T ≤ 615K, while PDF analysis indicated that the local structure (r < 8Å) is better described by a P2 1 ma symmetry. Above 615 K, the average structure transitions to an AFE R phase (Pmmn or Pnma), while PDF analysis shows an increased disordering of the octahedral distortions and Na displacements at the local scale. These results indicate that the average P/Q/R phase transitions in NN can be described as a result of complex ordering of distorted octahedral tilts at the nanoscale and off-centered displacements of the Na atoms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Substitution of Pb with (Li 1/2 Bi 1/2 ) in PbZrO 3 -based antiferroelectric ceramics

PbZrO 3 -based antiferroelectric (AFE) ceramics are promising dielectrics for high-energy-density capacitors due to their reversible phase transitions during charge–discharge cycles. In this work, a new composition series, [Pb 0.93–x La 0.02 (Li 1/2 Bi 1/2 ) x Sr 0.04 ][Zr 0.57 Sn 0.34 Ti 0.09 ]O 3 , with Li + and Bi 3+ substitution of Pb 2+ at x=0 , 0.04, 0.08, 0.12, 0.16 is investigated for the microstructure evolution, ferroelectric (FE) and dielectric properties. It is found that Li + and Bi 3+ substitution can significantly reduce the sintering temperature and simultaneously enhance the dielectric breakdown strength. An ultrahigh energy efficiency (94.0%) and a large energy density (3.22J/cm 3 ) are achieved in the composition of x = 0.12 with a low sintering temperature (1075°C).

36 MATERIALS SCIENCE↗

Mechanism of Antiferroelectricity in Polycrystalline ZrO 2

The size and electric field dependent induction of polarization in antiferroelectric ZrO 2 is the key to several technological applications that are unimaginable a decade ago. However, the lack of a deeper understanding of the mechanism hinders progress. Molecular dynamics simulations of polycrystalline ZrO 2 , based on machine-learned interatomic forces with near ab initio quality, shed light on the fundamental mechanism of the size effect on the transition fields. Stress in the oxygen sublattice is the most important factor. The so constructed interatomic forces allow the calculation of the transition fields as a function of the ZrO 2 film thickness and predict the ferroelectricity at large thickness. The simulation results are validated with electrical and piezo response force microscopy measurements. The results allow a clear interpretation of the properties of the double-hysteresis loops as well as the construction of the free energy landscape of ZrO 2 grains.

36 MATERIALS SCIENCE↗

Effect of Local Structural Distortions on Antiferroelectric–Ferroelectric Phase Transition in Dilute Solid Solutions of K x Na 1– x NbO 3

The fundamental principles that govern antiferroelectric (AFE)–ferroelectric (FE) transitions are not well understood for many solid solutions of perovskite compounds. For example, crystal chemical considerations based on the average Goldschmidt tolerance factor or ionic polarizability do not precisely predict the boundary between the AFE and FE phases in dilute solid solutions of alkali niobates, such as K x Na 1– x NbO 3 ( x ≤ 0.02). Here, based on detailed structural analysis from neutron total scattering experiments, we provide insights about how the relative local distortions around the A- and B-sites of the ABO 3 perovskite structure affect the AFE/FE order of the average crystallographic phases in K x Na 1– x NbO 3 . Specifically, we show that a higher (lower) ratio of B-site-centered distortions over A-site-centered distortions drives transition toward a long-range FE (AFE) phase, which is based on a competition between the long-range polarizing field of the Nb–O dipoles and the disordering effect of local distortions around the A-site. Our study provides a predictive tool for designing complex solid-solution perovskites with tunable (anti)ferroelectric polarization properties, which can be of interest for various energy-related applications such as high-density energy storage and solid-state cooling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Piezoelectric domain walls in van der Waals antiferroelectric CuInP2Se6

Polar van der Waals chalcogenophosphates exhibit unique properties, such as negative electrostriction and multi-well ferrielectricity, and enable combining dielectric and 2D electronic materials. Using low temperature piezoresponse force microscopy, we revealed coexistence of piezoelectric and non-piezoelectric phases in CuInP2Se6, forming unusual domain walls with enhanced piezoelectric response. From systematic imaging experiments we have inferred the formation of a partially polarized antiferroelectric state, with inclusions of structurally distinct ferrielectric domains enclosed by the corresponding phase boundaries. The assignment is strongly supported by optical spectroscopies and density-functional-theory calculations. Enhanced piezoresponse at the ferrielectric/antiferroelectric phase boundary and the ability to manipulate this entity with electric field on the nanoscale expand the existing phenomenology of functional domain walls. At the same time, phase-coexistence in chalcogenophosphates may lead to rational strategies for incorporation of ferroic functionality into van der Waals heterostructures, with stronger resilience toward detrimental size-effects.

36 MATERIALS SCIENCE↗

Observation of solid-state bidirectional thermal conductivity switching in antiferroelectric lead zirconate (PbZrO 3 )

Materials with tunable thermal properties enable on-demand control of temperature and heat flow, which is an integral component in the development of solid-state refrigeration, energy scavenging, and thermal circuits. Although gap-based and liquid-based thermal switches that work on the basis of mechanical movements have been an effective approach to control the flow of heat in the devices, their complex mechanisms impose considerable costs in latency, expense, and power consumption. As a consequence, materials that have multiple solid-state phases with distinct thermal properties are appealing for thermal management due to their simplicity, fast switching, and compactness. Thus, an ideal thermal switch should operate near or above room temperature, have a simple trigger mechanism, and offer a quick and large on/off switching ratio. In this study, we experimentally demonstrate that manipulating phonon scattering rates can switch the thermal conductivity of antiferroelectric PbZrO 3 bidirectionally by –10% and +25% upon applying electrical and thermal excitation, respectively. Our approach takes advantage of two separate phase transformations in PbZrO 3 that alter the phonon scattering rate in different manners. In this study, we demonstrate that PbZrO 3 can serve as a fast (<1 second), repeatable, simple trigger, and reliable thermal switch with a net switching ratio of nearly 38% from ~1.20 to ~1.65 W m –1 K –1 .

25 ENERGY STORAGE↗

Prediction of high strain polar phases in antiferroelectric PbZrO 3 from multiscale approach

PbZrO 3 is regarded as the first antiferroelectric and currently under intense reexamination. We propose a multiscale approach that combines classical and first principles density functional theory based simulations to explore polar phases in this material. Application of this approach to PbZrO 3 predicts three polar phases, none of which is the common $R3c$. The lowest energy polar phase - $Cc$ - is metastable at zero Kelvin but can be stabilized by application of electric field. Its structural and polarization response to the electric field is in good agreement with experimental data from the literature. The other two phases are $Ima2$ and $I4cm$ of orthorhombic and tetragonal symmetry, respectively, and predicted to stabilize at finite temperatures and under application of larger electric fields. These two phases exhibit very large strain which is of technological significance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗