Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Annulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Unsteady Full Annulus Simulations of a Transonic Axial Compressor Stage

Two recent research endeavors in turbomachinery at NASA Glenn Research Center have focused on compression system stall inception and compression system aerothermodynamic performance. Physical experiment and computational research are ongoing in support of these research objectives. TURBO, an unsteady, three-dimensional, Navier-Stokes computational fluid dynamics code commissioned and developed by NASA, has been utilized, enhanced, and validated in support of these endeavors. In the research which follows, TURBO is shown to accurately capture compression system flow range-from choke to stall inception-and also to accurately calculate fundamental aerothermodynamic performance parameters. Rigorous full-annulus calculations are performed to validate TURBO s ability to simulate the unstable, unsteady, chaotic stall inception process; as part of these efforts, full-annulus calculations are also performed at a condition approaching choke to further document TURBO s capabilities to compute aerothermodynamic performance data and support a NASA code assessment effort.

Herrick, Gregory P.↗
NASA NTRS1973

Performance of transonic fan stage with weight flow per unit annulus area of 208 kilograms per second per square meter (42.6 (lb/sec)/sq ft)

Performance was obtained for a 50-cm-diameter compressor designed for a high weight flow per unit annulus area of 208 (kg/sec)/sq m. Peak efficiency values of 0.83 and 0.79 were obtained for the rotor and stage, respectively. The stall margin for the stage was 23 percent, based on equivalent weight flow and total-pressure ratio at peak efficiency and stall.

Urasek, D. C.↗
NASA NTRS1973

Performance of transonic fan stage with weight flow per unit annulus area of 198 kilograms per second per square meter (40.6(lb/sec)/sq ft)

The overall and blade-element performance are presented for an air compressor stage designed to study the effect of weight flow per unit annulus area on efficiency and flow range. At the design speed of 424.8 m/sec the peak efficiency of 0.81 occurred at the design weight flow and a total pressure ratio of 1.56. Design pressure ratio and weight flow were 1.57 and 29.5 kg/sec (65.0 lb/sec), respectively. Stall margin at design speed was 19 percent based on the weight flow and pressure ratio at peak efficiency and at stall.

Kovich, G.↗
NASA NTRS1976

Effects of four inlet and outlet tip-annulus-area blockage configurations on the performance of an axial-flow fan rotor

An axial-flow fan rotor was tested with four configurations of tip-annulus-area blockage to speeds as high as 0.8 of design speed. The rotor performance with the four blockage configurations is compared with the unblocked rotor performance and with blockage configurations previously investigated. The blockage configurations enable the rotor to operate in a stable condition, to much lower flows than the unblocked rotor, with no evidence of rotating stall. The blockage configurations were effective in reducing rotor torque and weight flow but were accompanied by reductions in pressure ratio and efficiency.

Osborn, W. M.↗
NASA NTRS1976

On the flow in an annulus surrounding a whirling cylinder

When fluid in an annulus between two cylinders is set in motion by whirling movements of one or both of the cylinders, dynamic forces are imposed by the fluid on the cylinders. Knowledge of these forces is frequently important, indeed often critical, to the engineer designing rotor systems or journal bearings. Quite general solutions of the Navier-Stokes equations are presented for this problem and are limited only by restrictions on the amplitude of the whirl motion. From these solutions, the forces are derived under a wide variety of circumstances, including large and small annular widths, high and low Reynolds numbers, and the presence and absence of a mean flow created by additional net rotation of one or both of the cylinders.

Brennen, C.↗
NASA NTRS1982

Vacillations due to wave interference - Applications to the atmosphere and to annulus experiments

It is noted that vacillations in zonally averaged flows can arise from wave interference between coexisting waves with the same zonal wavenumber but different phase speeds. It is shown that the appropriate baroclinic instability problem for the annulus does yield multiple instabilities which can produce vacillations via interference. It is also shown that the interference of traveling Rossby waves with stationary forced waves can lead to vacillations whose amplitudes and periods are consistent with the observed index cycle.

Lindzen, R. S.↗
NASA NTRS1982

Three-dimensional flow field in the tip region of a compressor rotor passage. I - Mean velocity profiles and annulus wall boundary layer

A rotating three-sensor, hot-wire probe has been used along with rotor blade static pressure measurements to investigate the complex inviscid and viscid effects in the annulus wall flowfield, including the three components of mean velocity, turbulence intensity, and turbulence stress inside the rotor blade passage. It is found that the tip leakage flow originates near quarter-chord, with peak values occurring near mid-chord. The leakage flow, which is in the form of a jet within the blade row, is augmented by the blade rotation and travels further away from the suction surface than that observed in stationary blade rows and cascades. This leakage flow tends to roll up between the mid-passage and the pressure surface near the tip region; the vortex formation does not occur within the passage in this particular case.

Lakshminarayana, B.↗
NASA NTRS1982

Measurement of interstage fluid-annulus dynamical properties

The work described in this paper is part of an Electric Power Research Institute sponsored effort to improve rotor vibrational performance on power plant feed water pumps. A major objective of this effort is to reduce vibration levels by devising inter-stage sealing configurations with optimized damping capacity, realizing that the typical multi-stage centrifugal pump has several ore inter-stage fluid annuli than it has journal bearings. Also, the fluid annuli are distributed between the journal bearings where vibration levels are highest and can therefore be 'exercised' more as dampers than can the bearings. Described in this paper is a test apparatus which has been built to experimentally determine fluid-annulus dynamical coefficients for various configurations of inter-stage sealing geometry.

Adams, M. L.↗
NASA NTRS1983

A linear analysis of the transition curve for the baroclinic annulus

A primitive equation linear model is shown to be capable of quantitatively predicting the neutral curve for a baroclinic annulus. Flows unstable to small nonaxisymmetric perturbations are assumed to lie on the nonaxisymmetric side of a transition curve, while the stable flows are on the axisymmetric side. The stability in the presence of perturbations is tested with linearized hydrostatic primitive equations. Attention is given to the fastest growing eigenmodes, demonstrating that the linear and nonlinear wave have similar structures at a particular point in the nonaxisymmetric regime. All the waves are similar to the Eddy wave except at the extreme to the transition curve, where the waves maintain little structure with height. The eddy kinetic energy is baroclinic with a potential energy suppresed by the large static stability of the basic state. Eddy dissipation is noted to be significant near all boundaries.

Miller, T. L.↗
NASA NTRS1989

Transition to two-dimensional turbulent convection in a rapidly rotating annulus

Convection in a rapidly rotating, differentially heated annulus with sloping top and bottom lids is investigated using a semianalytical model. A relatively simple two-dimensional structure is preserved in the experimentally observed flow under rapid rotation, with temporal complexity increasing with the Rayleigh number. The model is, therefore, two-dimensional and exibits a sequence of bifurcations from steadily drifting, azimuthally periodic convection columns (thermal Rossby waves) through vacillation and a period-doubling cascade, to aperiodic weakly turbulent solutions. The results obtained here agree to within a few percent with an earlier limited-resolution two-dimensional model.

Lin, R.-Q.↗
NASA NTRS1990

Numerical simulation of solidification in a horizontal cylindrical annulus charged with an aqueous salt solution

A computational study of solidification of a binary Na2CO3 solution in a horizontal cylindrical annulus is performed using a continuum formulation with a control-volume based, finite-difference scheme. The initial conditions were selected to facilitate the study of counter thermal and solutal convection, accompanied by extensive mushy region growth. Numerical results are compared with experimental data with mixed success. Qualitative agreement is obtained for the overall solidification process and associated physical phenomena. However, the plume thickness calculated for the solutally-driven convective upflow is substantially smaller than the observed value. Evolution of double-diffusive layers is predicted, but over a time scale much smaller than that observed experimentally. Good agreement is obtained between predicted and measured results for solid growth, but the mushy region thickness is significantly overpredicted.

Neilson, D. G.↗
NASA NTRS1991

Hysteresis and the transition between axisymmetric flow and wave flow in the baroclinic annulus

A numerical model is employed to establish the transitions between axisymmetric flow and wave flow in the rotating, differentially heated annulus experiments of Fein for both rigid lid and free surface cases. It is shown that, for most of the transitions, the method of computing a steady axisymmetric flow and then testing its linear stability to wave disturbance results in good agreement with the experiments. Implications for the investigation of the dynamics of the earth's atmosphere are considered.

Miller, Timothy L.↗
NASA NTRS1991

Liquid annulus

It is shown that the specific impulse varies with the square root of the temperature and inversely with the square root of the molecular weight of the propellant. Typical values for specific impulse corresponding to various rocket concepts are shown. The Liquid Annulus core concept consists of a fuel element which will be arranged in a moderator block. The advantages as seen for the system are: high specific impulse; structural material will all run at low temperature; and lower fission product inventory because of evaporation. It is felt that this concept is worth at least a first look because of the promise of very high specific impulse. Because of the low thrust, one would probably need a cluster of engines. This is not necessarily bad because there would be some redundancy, but because of the low thrust one might have to refuel while running. Depending on the fuel vaporization, material can be included in the uranium that is injected as one is running along.

Ludewig, Hans↗