Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Adjoint Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

More about the lattice Hamiltonian for Adjoint QCD 2

In our earlier work [1], we introduced a lattice Hamiltonian for Adjoint QCD 2 using staggered Majorana fermions. We found the gauge invariant space of states explicitly for the gauge group SU(2) and used them for numerical calculations of observables, such as the spectrum and the expectation value of the fermion bilinear. In this paper, we carry out a more in-depth study of our lattice model, extending it to any compact and simply-connected gauge group G. We show how to find the gauge invariant space of states and use it to study various observables. We also use the lattice model to calculate the mixed ’t Hooft anomalies of Adjoint QCD 2 for arbitrary G. We show that the matrix elements of the lattice Hamiltonian can be expressed in terms of the Wigner 6j-symbols of G. For G = SU(3), we perform exact diagonalization for lattices of up to six sites and study the low-lying spectrum, the fermion bilinear condensate, and the string tension. We also show how to write the lattice strong coupling expansion for ground state energies and operator expectation values in terms of the Wigner 6j-symbols. For SU(3) we carry this out explicitly and find good agreement with the exact diagonalizations, and for SU(4) we give expansions that can be compared with future numerical studies.

confinement↗
DOE OSTI2026

Directional dependence of equilibrated TLD-400 chips in multiple radiation fields

Fielding of thermoluminescent dosimeters (TLDs) for measurement of photon radiation dose in experiments is the standard practice for γ-irradiation facilities, pulsed power x-ray facilities, and reactor facilities at Sandia National Laboratories (SNL). Due to the high-dose experimental conditions and the mixed ( 1 n, γ) fields in these facilities, SNL radiation metrologists have historically used CaF 2 :Mn TLDs (also known as TLD-400). Recent inquiries to the radiation metrology staff have raised concerns that the aluminum-equilibrated TLD-400 chips may exhibit a directionally dependent response. The metrologists were asked whether the dose measured by the chip may be impacted by the angle of incidence on the equilibrated TLD. To provide a thorough answer to this query, a set of adjoint Monte Carlo radiation transport calculations was performed for three different equilibrated TLDs as well as bare TLD chips using the Integrated Tiger Series (ITS) code. The key feature of the adjoint calculations performed in this study is that each photon escaping the modeled geometry was tallied into angular bins to provide information on both the energy and angular dependence of the equilibrated chip. After the adjoint Monte Carlo calculations were completed, the resulting energy-dependent response function for each angular bin was convolved with multiple photon energy spectra representing various radiation facilities at SNL. The radiation facilities selected for analysis span a range of photon energies from approximately 1 keV up to approximately 20 MeV. Thus, the presented results are applicable to a wide variety of radiation facilities around the world. Although the bare TLD-400 chip was expected to display the largest variation due to the photon angle of impact on the dosimeter, the dosimeter with the thinnest aluminum equilibrator (SNL thin equilibrated TLD-400) was determined to have the biggest differential between the impact angle with the maximum dose ( D max ) and the impact angle with the minimum dose ( D min ). However, the SNL normal equilibrated TLD-400 chip demonstrated a dramatic reduction in that differential between maximum and minimum dose angles. The reduction in this differential is one of the dominant factors in experimenters’ choice to field these dosimeters at SNL radiation facilities. The results from the PNNL (Hanford) energy-flattening field capsule are consistent with the previous publications. The differential dose responses due to the photon impact angle indicate that experimenters should strive to field their TLD-400 dosimeters in a consistent manner to avoid additional uncertainty in the measurements based on dosimeter orientation.

Adjoint radiation transport↗
DOE OSTI2025

Shear and bulk viscosity for a pure glue theory using an effective matrix model

At nonzero temperatures, the deconfining phase transition can be analyzed using an effective matrix model to characterize the change in holonomy. The model includes gluons and two-dimensional ghost fields in the adjoint representation, or “teens.” As ghosts, the teen fields are responsible for the decrease of the pressure as 𝑇 →𝑇 𝑑 , with 𝑇 𝑑 the transition temperature for deconfinement. Using the solution of this matrix model for a large number of colors, the parameters of the teen fields are adjusted so that the expectation value of the Polyakov loop is close to the values from the lattice. The shear, 𝜂, and bulk, 𝜁, viscosities are computed at nonzero holonomy to leading logarithmic order in weak coupling. In the pure glue theory, the value of the Polyakov loop is relatively large in the deconfined phase, ≈1/2 at 𝑇 𝑑 . Consequently, if 𝑠 is the entropy density, while 𝜂/𝑠 decreases as 𝑇 →𝑇 𝑑 , it is still well above the conformal bound. In contrast, 𝜁/𝑠 is largest at 𝑇 𝑑 , comparable to 𝜂/𝑠, then falls off rapidly with increasing temperature and is negligible by ∼2⁢𝑇 𝑑 .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

An efficient surrogate model of secondary electron formation and evolution

This work extends the adjoint-deep learning framework for runaway electron (RE) evolution, developed by McDevitt et al. [Phys. Plasmas 32, 042503 (2025)], to account for large-angle collisions. By incorporating large-angle collisions, the framework allows the avalanche of REs to be captured, an essential component of RE dynamics. This extension is accomplished by using a Rosenbluth–Putvinski approximation to estimate the distribution of secondary electrons generated by large-angle collisions. By evolving both the primary and multiple generations of secondary electrons, the present formulation can capture both the detailed temporal evolution of a RE population beginning from an arbitrary initial momentum space distribution, along with providing approximations to the saturated growth and decay rates of the RE population. Predictions of the adjoint-deep learning framework are verified against a traditional RE solver, with good agreement present across a broad range of parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Earth System Reanalysis in Support of Climate Model Improvements

Recent climate model developments, established through increased model resolution, have led to substantial improvements in model simulations of the time-evolving, coupled Earth system and its subcomponents. However, regardless of resolution, climate models will always produce climate features and variability that differ from the real world and will be prone to biases. This is due to many remaining uncertainties, such as in parametric and structural model uncertainty, in the initial conditions prescribed, and in the prescribed (scenario) forcing which varies on decadal to centennial timescales. Further model improvements are expected to arise specifically from improved representation of physical processes realized through model-data fusion. This will create an unprecedented opportunity to better exploit a large array of Earth observations, from in situ measurements to weather radars and satellite observations, as the resolved scales of the models approach those of the observations. For this, climate DA will be the central tool to bring models and observations into consistency, by improving initial conditions, inferring uncertain model parameters and structure, and quantifying uncertainty. Generally, there will be advantages and complementarities of adjoint-based smoother approaches, ensemble-based filter approaches, or new ML-inspired approaches. Yet, the ever-increasing model resolution will present growing challenges arising from computational cost, calling for new ways of performing data assimilation and model optimization. Using the complementarity in a hybrid approach, blending tools and concepts from variational, ensemble and ML methods might be what is required in the future. In this context ML could be important to handle non-linear responses, and to better approximate non-Gaussian distributions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

LATTE: Los Alamos TravelTime package based on Eikonal equation

This Fortran code focuses on traveltime computation and tomography based on eikonal equation. Specifically, the package provides three major functionalities: (1) forward modeling of traveltime from single-point or ensemble source based on factorized eikonal equation, (2) adjoint-state first-arrival traveltime tomography based on picked first arrival traveltime using steepest descent, conjugate gradient, or limited-memory BFGS inversion scheme, and (3) adjoint-state joint transmission-reflection tomography based on picked first-arrival and reflection traveltimes. The package applies to forward modeling and tomography based on traveltime in 2D and 3D isotropic regular-grid models. We name this package LATTE – Los Alamos TravelTime package based on Eikonal equation. * The code is for accompanying a journal paper under preparation. The paper will be submitted via LA-UR separately later.

Gao, Kai↗
DOE OSTI2025

Hidden amplitude zeros from the double-copy map

Recently, Arkani-Hamed proposed the existence of zeros in scattering amplitudes in certain quantum field theories including the cubic adjoint scalar theory Tr ( ϕ 3 ) , the S U ( N ) nonlinear sigma model and Yang-Mills theory. These hidden zeros are special kinematic points where the amplitude vanishes and factorizes into a product of lower-point amplitudes, similar to factorization near poles. In this paper, we show a close connection between the existence of such zeros and the double-copy map. In fact, compatibility with the Bern-Carrasco-Johansson relations requires the presence of these zeros. We also show that these zeros extend via the Kawai-Lewellen-Tye relations to special Galileon amplitudes and their corrections, evincing that these hidden zeros are also present in permutation-invariant amplitudes. Published by the American Physical Society 2025

Bartsch, Christoph (ORCID:0000000174296682)↗
DOE OSTI2024

Small circle expansion for adjoint QCD 2 with periodic boundary conditions

We study 1 + 1-dimensional SU(N) gauge theory coupled to one adjoint multiplet of Majorana fermions on a small spatial circle of circumference L. Using periodic boundary conditions, we derive the effective action for the quantum mechanics of the holonomy and the fermion zero modes in perturbation theory up to order (gL) 3 . When the adjoint fermion mass-squared is tuned to g 2 N/(2π), the effective action is found to be an example of supersymmetric quantum mechanics with a nontrivial superpotential. We separate the states into the ℤN center symmetry sectors (universes) labeled by p = 0, . . . , N – 1 and show that in one of the sectors the supersymmetry is unbroken, while in the others it is broken spontaneously. These results give us new insights into the (1, 1) supersymmetry of adjoint QCD 2 , which has previously been established using light-cone quantization. When the adjoint mass is set to zero, our effective Hamiltonian does not depend on the fermions at all, so that there are 2 N−1 degenerate sectors of the Hilbert space. This construction appears to provide an explicit realization of the extended symmetry of the massless model, where there are 2 2N−2 operators that commute with the Hamiltonian. We also generalize our results to other gauge groups G, for which supersymmetry is found at the adjoint mass-squared g 2 h ∨ /(2π), where h ∨ is the dual Coxeter number of G.

effective field theories↗
DOE OSTI2025

Evaluation of PBR Spent Fuel Criticality and Dose Rate Compliance for Storage and Transportation

Spent tri-structural isotropic (TRISO)–based fuels have a strong track record in storage and transportation without documented incidents. This work seeks to reduce uncertainty to aid in more informed spent fuel management of TRISO-based fuels by modeling both fresh and spent pebble bed reactor (PBR) fuel and comparing the results to the regulatory standards from 10 CFR 71. SCALE was used for all modeling due to it having fast and accurate methods for handling PBR fuel modeling, as well as having an efficient method for shielding calculations in monaco with automated variance reduction using importance calculations (MAVRIC), which utilizes the consistent adjoint-driven importance sampling (CADIS) and the forward-weighted consistent adjoint-driven importance sampling (FW-CADIS) methods. KENO-VI was used for all criticality calculations, TSUNAMI was used for uncertainty quantification on k-effective, TRITON and the Oak Ridge isotope generation code (ORIGEN) were both used for depletion of the fuel, and MAVRIC was used for shielding calculations. For criticality assessments, this study focused on the requirement that the value of the neutron multiplication factor, k-effective (k-eff), would not exceed a peak value of 0.95, including uncertainty, with 95% confidence. Criticality was initially examined by modeling fresh fuel from three different designs—HTR-10 fuel, PBMR-400 fuel, and demonstration fuel representative of a TRISO-fueled modern high-temperature gas reactor (HTGR) design, henceforth referred to as Demo HTGR—and placing them into various sized containers with conditions described in 10 CFR 71 to quantify the peak k-eff state. When the peak value of 0.95 k-eff was exceeded, mitigation methods were examined in those scenarios. Burnup credit, pebble displacement in areas of strong neutron multiplication, and random pebble replacement using pebbles of various compositions and replacement fractions were examined. In summary, the criticality of PBR fuels can be well accounted for by restricting container size, taking credit for burnup, or by displacing/replacing pebbles. Uncertainty of the k-eff due to nuclear data uncertainties was recorded at ~0.6644%Δk/k, or roughly 664% mil (pcm). The nuclear data–induced uncertainty was relatively small and should not require significant modification in the design to be accounted for. Revisions to the evaluated nuclear data file values have been shown to have a larger impact than nuclear data–induced uncertainty. For dose rate aspects, U.S. Nuclear Regulatory Commission regulations require a maximum dose rate of 10 millirem per hour (mrem/h) at 2 meters. In examining the dose rate behavior of spent PBR fuel, the representative Demo HTGR fuel was modeled exclusively due to it possessing the highest target burnup of the examined fuels. Equilibrium cycle modeling methods were used to produce a higher-fidelity discharge isotopic composition than simple assumptions, such as reflected pebbles. The discharge composition was used as a source term in the fixed-source transport shielding calculations, and dose rates were calculated at 2 m for the shortest possible cooling time. The low concentration of fuel material led to dose rates that were in line with regulatory limits, despite the high burnup when compared to traditional light water reactor fuels. In conclusion, the methods employed in this study would require more work to further verify and validate and are limited to the criticality and dose rate analyses performed.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Inverse design for waveguide dispersion with a differentiable mode solver

Inverse design of optical components based on adjoint sensitivity analysis has the potential to address the most challenging photonic engineering problems. However, existing inverse design tools based on finite-difference-time-domain (FDTD) models are poorly suited for optimizing waveguide modes for adiabatic transformation or perturbative coupling, which lies at the heart of many important photonic devices. Among these, dispersion engineering of optical waveguides is especially challenging in ultrafast and nonlinear optical applications involving broad optical bandwidths and frequency-dependent anisotropic dielectric material response. In this work, we develop gradient back-propagation through a general-purpose electromagnetic eigenmode solver and use it to demonstrate waveguide dispersion optimization for second harmonic generation with maximized phase-matching bandwidth. This optimization of three design parameters converges in eight steps, reducing the computational cost of optimization by ∼100x compared to exhaustive search and identifying new designs for broadband optical frequency doubling of laser sources in the 1.3–1.4 µm wavelength range. Furthermore, we demonstrate that the computational cost of gradient back-propagation is independent of the number of parameters, as required for optimization of complex geometries. This technique enables practical inverse design for a broad range of previously intractable photonic devices.

Gray, Dodd (ORCID:000000030469599X)↗
DOE OSTI2026

Multipoint Aerostructural Optimization of Wind Turbine Rotors Using a Coupled Blade‐Resolved Aerostructural Solver

Physics‐based design optimization workflows thread the needle between computational cost limitations and simulation complexity, often compromising between modeling detail and the range of operating design conditions. Multipoint aerostructural optimization of wind turbine rotors has so far been confined to low‐fidelity analyses or to high‐fidelity studies with simplified structural models, leaving the most complex design trade‐offs unexplored. We close this gap by performing the first tightly coupled gradient‐based multipoint aerostructural rotor optimization using 3D aerodynamic and structural solvers with discrete coupled adjoints. The optimizer simultaneously varies blade planform, airfoil shapes, and structural thickness through more than 270 design variables, minimizing a weighted combination of rotor mass and power across multiple wind speeds. Applied to a modified DTU 10‐MW benchmark under conservative structural and aerodynamic constraints, our multipoint optimization reduces rotor mass by up to 36% and increases power by 12%–15% across the main operating conditions; biasing the objective toward power yields power gains up to 18% and a 17% mass reduction. For a nominal wind distribution, 3‐point rotor designs accounting for low RPM and high thrust conditions capture dominant trade‐offs and outperform single‐point designs. Adding two off‐design points changes individual‐condition power by less than 3% but leaves the weighted average within 0.5%, and the mass‐power bias has a stronger effect on the final design than the operating‐point weighting itself. Our framework extends naturally to richer load cases and site‐specific wind distributions, providing a basis for high‐fidelity multipoint design earlier in industrial workflows.

17 WIND ENERGY↗
DOE OSTI2024

A physics-constrained deep learning surrogate model of the runaway electron avalanche growth rate

A surrogate model of the runaway electron avalanche growth rate in a magnetic fusion plasma is developed. This is accomplished by employing a physics-informed neural network (PINN) to learn the parametric solution of the adjoint to the relativistic Fokker–Planck equation. The resulting PINN is able to evaluate the runaway probability function across a broad range of parameters in the absence of any synthetic or experimental data. This surrogate of the adjoint relativistic Fokker–Planck equation is then used to infer the avalanche growth rate as a function of the electric field, synchrotron radiation and effective charge. Predictions of the avalanche PINN are compared against first principle calculations of the avalanche growth rate with excellent agreement observed across a broad range of parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Anomalies of 4d SpinG theories

Abstract We consider ’t Hooft anomalies of four-dimensional gauge theories whose fermion matter content admits Spin G (4) generalized spin structure, withGeither gauged or a global symmetry. We discuss methods to directly computew 2 ∪w 3 ’t Hooft anomalies involving Stiefel-Whitney classes of gauge and flavor symmetry bundles that such theories can have on non-spin manifolds, e.g.M 4 = ℂℙ 2 . Such anomalies have been discussed for SU(2) gauge theory with adjoint fermions, where they were shown to give an effect that was originally found in the Donaldson-Witten topological twist of$$ \mathcal{N} $$ N = 2 SYM theory. We directly compute these anomalies for a variety of theories, including generalGgauge theories with adjoint fermions, SU(2) gauge theory with fermions in general representations, and Spin(N) gauge theories with fundamental matter. We discuss aspects of matching these and other ’t Hooft anomalies in the IR phase where global symmetries are spontaneously broken, in particular for generalG gauge theory withN f adjoint Weyl fermions. For example, in the case ofN f = 2 we discuss anomaly matching in the IR phase consisting of$$ {h}_{G_{\textrm{gauge}}}^{\vee } $$ h G gauge ∨ copies of a ℂℙ 1 non-linear sigma model, including for thew 2 w 3 anomalies when formulated with$$ {\textrm{Spin}}_{\textrm{SU}{(2)}_{\textrm{global}}}(4) $$ Spin SU 2 global 4 structure.

Physics↗
DOE OSTI2025

Quantification of regional net CO 2 flux errors in the Orbiting Carbon Observatory-2 (OCO-2) v10 model intercomparison project (MIP) ensemble using airborne measurements

Inverse model intercomparison projects (MIPs) provide a chance to assess the uncertainties in inversion estimates arising from various sources. However, accurately quantifying ensemble CO 2 flux errors remains challenging and often relies on the ensemble spread. This study proposes a method for quantifying the errors in regional net surface–atmosphere CO 2 flux estimates from models taken from the Orbiting Carbon Observatory-2 (OCO-2) v10 MIP by using independent airborne CO 2 measurements for the period 2015–2017. We first calculate the root mean square error (RMSE) between the ensemble mean of posterior CO 2 concentrations and airborne observations and then isolate the CO 2 concentration errors caused solely by the ensemble mean of posterior net fluxes by subtracting the observation, representation, and transport errors from seven regions. Our analysis reveals that the flux errors projected onto CO 2 space account for 55 %–85 % of the regional average RMSE over the 3 years, ranging from 0.88 to 1.91 ppm. In five regions, the error estimates based on observations exceed those computed from the ensemble spread of posterior fluxes by a factor of 1.33–1.93, implying an underestimation of the actual flux errors, while their magnitudes are comparable in two regions. The adjoint sensitivity analysis identifies that the underestimation of flux errors is prominent where the magnitudes of fossil fuel emissions exceed those of terrestrial-biosphere fluxes by a factor of 3–31 over the 3 years. This suggests the presence of systematic biases in the inversion estimates associated with errors in the prescribed fossil fuel emissions common to all models. Our study emphasizes the value of airborne measurements for quantifying regional errors in ensemble net CO 2 flux estimates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

CADIS and FW-CADIS Variance Reduction in Gamma Transport for Predicting Prompt Forensics Signatures

The goal of prompt nuclear forensics is to determine the characteristics of a nuclear detonation based on the signatures available almost immediately after the explosion. An important characteristic is the reaction time history (RTH), a measure of the device’s rate of neutron multiplication. The RTH can be estimated by observation of the gamma radiation emitted from the detonation, which can be detected directly or observed indirectly as Teller light. Gamma transport simulations used to predict these radiation fields are often modeled stochastically using the Monte Carlo N-Particle (MCNP) code, which can be a computationally demanding task due to the number of particle histories needed to achieve statistical convergence. In an attempt to improve the efficiency of these calculations, we evaluate two variance reduction techniques: Consistent Adjoint-Driven Importance Sampling (CADIS) and Forward-Weighted Consistent Adjoint-Driven Importance Sampling (FW-CADIS). These methods use a deterministically calculated adjoint flux to create weight windows and source biasing that guide MCNP sampling. We study the utility of CADIS and FW-CADIS for their use in MCNP gamma transport for nuclear forensics prediction simulations. Furthermore, the results demonstrate that both CADIS and FW-CADIS improve the accuracy for forensics-focused simulations, with CADIS being most beneficial in direct detection and FW-CADIS being ideal for computing a global Teller light source.

CADIS↗
DOE OSTI2025

LATTE: open-source, high-performance traveltime computation, tomography and source location in acoustic and elastic media

Traveltime-based tomography and source location are fundamental approaches for imaging subsurface structures and understanding the spatiotemporal distribution of seismicity from local to global scales. We present an open-source, high-performance framework integrating eikonal equation solvers and adjoint-state theory for traveltime computation, velocity tomography, source location and joint tomography-location in 2-D/3-D acoustic and elastic media. We introduce novel regularization schemes based on total generalized p-variation, structural similarity and multitask machine learning to enhance the fidelity and interpretability of inverted models and source locations. Key features of our implementation also include the ability to leverage both absolute-difference and double-difference traveltime misfits for high-fidelity velocity tomography and source parameter estimation; support for traveltime computation and inversion in diverse 2-D/3-D scenarios with arbitrary source and receiver distributions; and a perturbation-based optimal step-size estimation method to reduce computational costs. In addition, our implementation employs shared-memory and distributed-memory parallelization to provide an efficient solution for traveltime computation, tomography, and source location. In conclusion, we validate the efficacy and accuracy of our approach through multiple synthetic data examples.

58 GEOSCIENCES↗
DOE OSTI2026

Optimized Tandem Catalyst Patterning for CO 2 Reduction Flow Reactors

Tandem catalysis involves two or more catalysts arranged in proximity within a single reaction vessel, with the aim of synergistically aligning the catalysts’ reaction pathways to maximize overall system performance. This study presents a proof of concept showing the integration of continuum transport modeling with design optimization in a simplified two-dimensional flow reactor setup for electrochemical CO 2 reduction. Ag catalysts provide the CO 2 ⟶ CO reaction capability, and Cu catalysts provide the CO ⟶ high-value products reaction capability. Given a set of input parameters, the optimization algorithm uses adjoint methods to modify the Ag/Cu surface patterning in order to maximize the current density toward high-value products, such as ethylene. The optimized designs yield significant performance enhancement especially at more negative applied voltages (i.e., stronger surface reactions) and for larger numbers of patterning sections. For an applied voltage of −1.7 V vs. SHE, the 12-section optimized design increases the current density toward ethylene by up to 65% compared to the unoptimized 2-section design. For the optimized cases, observed differences in the production and consumption of CO (the key intermediate species) and minimized zones of low CO reactant surface concentration on Cu sections explain the improved reactor performance.

CO2 reduction↗
DOE OSTI2025

Cascading from $\mathscr{N}$ = 2 supersymmetric Yang–Mills theory to confinement and chiral symmetry breaking in adjoint QCD

We argue that adjoint QCD in 3 + 1 dimensions, with any SU(N) gauge group and two Weyl fermion flavors (i.e. one adjoint Dirac fermion), confines and spontaneously breaks its chiral symmetries via the condensation of a fermion bilinear. We flow to this theory from pure $\mathscr{N}$ = 2 SUSY Yang–Mills theory with the same gauge group, by giving a SUSY-breaking mass M to the scalars in the $\mathscr{N}$ = 2 vector multiplet. This flow can be analyzed rigorously at small M, where it leads to a deconfined vacuum at the origin of the $\mathscr{N}$ = 2 Coulomb branch. The analysis can be extended to all M using an Abelian dual description that arises from the N multi-monopole points of the $\mathscr{N}$ = 2 theory. At each such point, there are N −1 hypermultiplet Higgs fields h$^{i=1,2}_m$, which are SU(2) R doublets. We provide a detailed study of the phase diagram as a function of M, by analyzing the semi-classical phases of the dual using a combination of analytic and numerical techniques. The result is a cascade of first-order phase transitions, along which the Higgs fields h i m successively turn on, and which interpolates between the Coulomb branch at small M, where all h$^{i}_m$ = 0, and a maximal Higgs branch, where all h$^{i}_m$ ≠ 0, at sufficiently large M. We show that this maximal Higgs branch precisely matches the confining and chiral symmetry breaking phase of two-flavor adjoint QCD, including its broken and unbroken symmetries, its massless spectrum, and the expected large-N scaling of various observables. The spontaneous breaking pattern SU(2) R → U(1) R , consistent with the Vafa–Witten theorem, is ensured by an intricate alignment mechanism for the h$^{i}_m$ in the dual, and leads to a CP 1 sigma model of increasing radius along the cascade.

D’Hoker, Eric [Univ. of California, Los Angeles, C↗