Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Acidic electrolysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

High-performance multiblock PEMs containing a highly acidic fluorinated-hydrophilic domain for water electrolysis

The present paper describes the design and evaluation of novel hydrophilic–hydrophobic poly(arylene ether sulfone) (PAES) multiblock copolymers for their synergistic effects upon transport properties and their potential use in proton exchange membrane water electrolysis. The multiblock copolymers are prepared via a coupling reaction between (i) a hydrophilic segment consisting of a disulfonated quinone fluorinated biphenyl group that contains fluorine moieties next to the sulfonated groups to increase the acidity, and (ii) hydrophobic segments composed of non-sulfonated biphenyl sulfone to provide dimensional stability. Two different lengths (molecular weights; 5k and 10k, where k represents 10 3 g mol -1 ) of hydrophobic segments are used to investigate the effects of the membrane properties compared with those of Nafion® and PAES random copolymer (i.e., BPSH40). Atomic force microscopy images of the BPSH40 and multiblock membranes are shown to agree closely with a mesoscale simulation, thus confirming the importance of the morphological effect upon the transport properties. Furthermore, the multiblock copolymer with a higher proportion of hydrophilic segments (10 k–5k) was shown to provide enhanced performance (3.41 A cm -2 at 1.9 V) compared to the multiblock copolymer with equal proportions of hydrophilic and hydrophobic segments (10 k–10 k) due to the greater continuity of nano-sized ionic channels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Comparing Advanced Bipolar Membranes for High-Current Electrodialysis and Membrane Electrolysis

Advanced bipolar membranes (BPMs) with low water-dissociation overpotential (ηwd) may enable new electrochemical technologies for electrolysis, fuel cells, acid–base synthesis, brine remediation, lithium-battery recycling, and cement production. However, these advanced BPMs have only been demonstrated in BPM water electrolysis (BPMWE) configurations where the BPM is under static compression by the porous-transport layers. It is important to study these BPMs in applications like electrodialysis where large degrees of static compression are not possible. We present a BPM electrodialysis (BPMED) platform to measure water-dissociation overpotential (ηwd) and compare BPMWE and BPMED systems. We show advanced BPMs with half the ηwd compared to commercial BPMs for BPMED while maintaining ∼90% current efficiency from 0.05–0.5 A cm–2. The BPMED ηwd values are, however, about 0.2 V higher at 0.5 A cm–2 than those for BPMWE. Regardless, these results show that BPMs developed and optimized in BPMWE applications are well-suited for next-generation high-current-density BPMED technologies.

Vulpin, Olivia T↗
NASA NTRS1986

Concerning the electrosynthesis of hydrogen peroxide and peroxodisulfates. Section 2: Optimization of electrolysis cells using an electrolyzer for peroxodisulfuric acid as an example

The model is presented of an electrolyzer for peroxodisulfuric acid, and it is analyzed mathematically. Its application for engineering and economic optimization is investigated in detail. The mathematical analysis leads to conclusions concerning the change in position of the optimum with respect to the various target functions due to changes of the individual design-caused and economic parameters.

Schleiff, M.↗
DOE OSTI2022

Comparative Technoeconomic Analysis of Pathways for Electrochemical Reduction of CO 2 with Methanol to Produce Methyl Formate

Electrochemical CO 2 reduction has promise as a technology that could help society reach carbon neutrality while producing valuable fuels and chemicals. Herein, the electrochemical synthesis of methyl formate, a product not observed in aqueous CO 2 electrolysis, has been analyzed by a rigorous technoeconomic model to evaluate its commercial viability. Methyl formate synthesis has been demonstrated with high faradaic efficiency through the electroreduction of CO 2 in methanol. Four competing approaches were analyzed: (1) Electroreduction of captured CO 2 in a dual CH 3 OH/H 2 O electrolyzer, (2) Direct electroreduction of flue gas CO 2 in a dual CH 3 OH/H 2 O electrolyzer, (3) Electroreduction of captured CO 2 in a CH 3 OH/CH 3 OH electrolyzer, and (4) Electroreduction of captured CO 2 in a H 2 O/H 2 O electrolyzer with a downstream CH 3 OH reactor. Sensitivity analyses, cost contour plots, and comparison plots were generated. The dual methanol/water electrolysis approach was the most cost-competitive, with a levelized cost of methyl formate below the present market price. Here, the all-methanol electrolysis route was more expensive due to increased methanol consumption and greater distillation costs. Methyl formate production through aqueous CO 2 electrolysis to formic acid with a secondary esterification reaction was by far the most expensive approach, primarily due to the energy-intensive nature of distilling formic acid from water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Achieving high hydrogen productivities of 20 L/L-day via microbial electrolysis of corn stover fermentation products

Microbial electrolysis cells have the potential to generate renewable hydrogen from underused waste streams, however current devices have not reached very large productivity targets using real waste products at any scale. This study used a waste from fermented corn stover known as corn stover fermentation product to reach performance metrics that could be commercialized, if adequately scaled. Average current densities in MECs with mature biofilms reached 17.9 +/- 1.6 A/m 2 at an organic loading rate of 30 grams of chemical oxygen demand per liter of anode volume per day (g/L-day), reaching a maximum current density of 27.2 +/- 2.9 A/m 2 . Hydrogen productivities reached 20.2 +/- 2.0 L of H 2 per L anode volume per day (L/L-day). These represent the highest current densities and highest hydrogen productivities using a complex feedstock in a microbial electrolysis cell. Organic acids and sugars present in untreated substrate were converted at high percentages in MECs, with most above 90% conversion, at organic loading rates of 10, 20, and 30 g/L-day. The effect of periodic high liquid flow rates through the anode on performance was assessed. These tests, called pulsing, showed that hydrogen productivities and current densities increased most dramatically as flow was pulsed every hour at a baseline flow rate of 0.3 mL/min. These productivities show promise for high performance systems, if adequate scale up can be achieved.

09 BIOMASS FUELS↗
NASA NTRS1983

The definition of the process of electrochemical impregnation of nickel electrodes

Electrochemical impregnation was studied during a series of experiments designed to define the optimal conditions for the fabrication of dimensionally stable cell anodes of Ni-H2 and Ni-Cd systems. The influence of various parameters, such as current and duration of electrolysis, temperature and acidity of the chemical bath, the concentrations of Ni and Co as well as the use of ethanol was determined. Results show that the electrochemical impregnation process as defined is industrially feasible and it is suggested that Ni-H2 and Ni-Cd type electrodes be produced in sufficient quantity to further evaluate their performance characteristics.

Antoine, P.↗
NASA NTRS2003

Alternative Electrochemical Systems for Ozonation of Water

Electrochemical systems that are especially well suited for the small-scale generation of ozone and ozonated water for local use have been invented. These systems can operate with very little maintenance, and the only inputs needed during operation are electric power and water. Ozonated water produced by these systems can be used in diverse industrial applications: A few examples include sterilization in the brewing industry, general disinfection, and treatment of sewage and recycled water. The basic principle of operation admits of several alternative system configurations. The heart of the system is a stack of electrolytic cells, each containing a proton-exchange membrane (which serves as a solid electrolyte) sandwiched between a catalytic anode and a catalytic cathode. Preferably, the proton-exchange membrane is made of a perfluorinated sulfonic acid polymer. During electrolysis, a mixture of O2 and O3 gases is generated at the anode and H2 is generated at the cathode. Some of the O3 generated at the anode becomes dissolved in the water. The proportion of O3 in the O2/O3 mixture can be maximized by the selection of suitable electrode materials and the use of a high overpotential. Although the proton-exchange membrane conducts protons, it does not conduct electrons. It is also impermeable by gases; consequently, it maintains separation between the O2/O3 mixture evolved at the anode and the H2 evolved at the cathode.

Andrews, Craig C.↗
DOE OSTI2024

Ruthenium-lead oxide for acidic oxygen evolution reaction in proton exchange membrane water electrolysis

Developing an active and stable anode catalyst for the proton exchange membrane water electrolyzer (PEM-WE) is a critical objective to enhance the economic viability of green hydrogen technology. However, the expensive iridium-based electrocatalyst remains the sole practical material with industrial-level stability for the acidic oxygen evolution reaction (OER) at the anode. Ruthenium-based catalysts have been proposed as more cost-effective alternatives with improved activity, though their stability requires enhancement. The current urgent goal is to reduce costs and noble metal loading of the OER catalyst while maintaining robust activity and stability. Here, in this study, we design a Ru-based OER catalyst incorporating Pb as a supporting element. This electrocatalyst exhibits an OER overpotential of 201 mV at 10 mA.cm -2 , simultaneously reducing Ru noble metal loading by similar to 40%. Normalization of the electrochemically active surface area unveils improved intrinsic activity compared to the pristine RuO 2 catalyst. During a practical stability test in a PEM-WE setup, our developed catalyst sustains stable performance over 300 h without notable degradation, underscoring its potential for future applications as a reliable anodic catalyst.

Electrocatalysis↗
DOE OSTI2023

Impact of Electrolyte Composition on Bulk Electrolysis of Furfural over Platinum Electrodes

Partial oxidation of furanic biomass derivatives such as furfural is of interest for the sustainable production of chemicals including furoic acid, maleic acid, and 2,5-furandicarboxylic acid (FDCA). The oxidative bulk electrolysis of furfural is here investigated on platinum electrodes in acidic media. The effects of potential, concentration, pH, and supporting anion are studied, and selectivity trends are coupled with attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) to illuminate adsorbate structures that influence the catalysis. Increasing potential is found to shift selectivity from primarily C 5 products to C 4 products, coincident with oxidation of the Pt surface. Selectivity changes are also observed moving from pH 1 to pH 4, with an increase in C 5 products at higher pH. Furthermore, changing from the weakly adsorbing perchlorate anion to the specifically-adsorbing phosphate anion results in a number of changes that manifest differently depending on potential and pH. Selectivity to furoic acid is found to be highest above the pKa of phosphoric acid due to the strongly adsorbed phosphate ions suppressing flat-lying configurations of furfural that lead to C−C cleavage. These results point toward opportunities to use electrolyte engineering to tune selectivity and optimize surface conditions to disfavor binding of inhibitory products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Design for Carbon Conversion Product Pathways with Nuclear Power Plant Integration (PCC)

Coal is a globally abundant resource that historically has been used for power generation via combustion. As the power industry replaces coal with cleaner methods of generation, energy rich coal could be used in other chemical and fuel applications. This study presents a coal utilization option in which coal combustion is replaced with a carbon-free nuclear power plant and the coal is upgraded to valuable products for a variety of markets. Coal is prepared for conversion first by the pyrolysis process, which will optimize solid, liquid, and gaseous products based on the market size and potential product value, maximizing the monetary value of coal. This process is designed using bituminous coal from the Appalachian region as a basis to provide a pathway to preserve or transition coal-related jobs and create new jobs associated with the clean energy transition. Process modeling will be used to determine each component’s sensitivities, costs, inputs, and outputs Advanced and light-water reactors are considerations to supply the heat, steam, and electricity to the process. This paper focuses on the technical and market analysis used to determine the optimal processes and product pathways for the carbon refinery. Product pathways are on activated carbon, formic acid synthesis, and methanol synthesis for further upgrading to marketable chemical and polymer products.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS2009

Lunar Oxygen Production and Metals Extraction Using Ionic Liquids

Initial results indicate that ionic liquids are promising media for the extraction of oxygen from lunar regolith. IL acid systems can solubilize regolith and produce water with high efficiency. IL electrolytes are effective for water electrolysis, and the spent IL acid media are capable of regeneration.

Marone, Matthew↗
DOE OSTI2024

Vanadium Substitution Dictates H Atom Uptake at Lindqvist-type Polyoxotungstates

Understanding how modification of molecular structures changes the thermochemistry of H atom uptake can provide design criteria for the formation of highly active catalysts for reductive transformations. Herein, we describe the effect of doping an atomically precise polyoxotungstate with vanadium on proton-coupled electron transfer (PCET) reactivity. The Lindqvist-type polyoxotungstate [W 6 O 19 ] 2– displays reversible redox chemistry, which was found to be unchanged in the presence of acid, indicating an inability to couple reduction with protonation. However, the incorporation of a single vanadium center into the structure significantly changes the reactivity, and the potential required for one-electron reduction of [VW 5 O 19 ] 3– was shown to vary with the strength of the acid added. Construction of a potential-pK a diagram allowed assessment of the thermodynamics of H atom uptake, indicating BDFE(O–H) ≈ 64 kcal/mol, while chemical synthesis of the reduced/protonated derivative (TBA) 3 [VW 5 O 19 H] was used to probe the position of protonation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Ir–Ru Particles Enable Low-Loading Acidic Oxygen Evolution for Integrated Solar Devices

Integrated photoelectrochemical (PEC) devices for water splitting represent a compelling pathway for sustainable hydrogen production, directly converting solar energy into chemical fuels. While alkaline systems have achieved state-of-the-art solar-to-hydrogen (STH) efficiencies above 20% using earth-abundant catalysts, acidic PEC architectures provide unique advantages for compact device integration, fast proton transport, and stable operation under highly dynamic solar conditions. Proton-exchange membrane (PEM)-based configurations enable high current densities, low gas crossover, and rapid ionic response, making them especially well-suited for intermittent, bias-free PEC operation, despite alkaline electrolysis being more technologically mature. A critical limitation of acidic PEC systems remains, the oxygen evolution reaction (OER), which currently relies on scarce and costly iridium catalysts, restricting scalability. Here, in this study, we report a series of low-iridium mixed-metal oxide catalysts synthesized via a surfactant-assisted borohydride reduction method. An optimized Ir 0.5 Ru 0.5 O x catalyst exhibits exceptional intrinsic activity (>400 A g –1 Ir at 1.55 V vs RHE) in 0.1 M HClO 4 and maintains stable operation for over 10 days in an integrated PEC flow-cell. Sustained hydrogen production is achieved at 1.65 V with a total iridium loading of only 0.1 mg cm –2 , substantially below commercial PEM benchmarks. These results demonstrate a viable pathway toward scalable, high-performance acidic PEC hydrogen technologies.

Acidic electrolysis↗
DOE OSTI2022

Electrodeposited Sn–Cu@Sn dendrites for selective electrochemical CO 2 reduction to formic acid

Large-scale CO 2 electrolysis can be applied to store renewable energy in chemicals. Recent developments in gas diffusion electrodes now enable a commercially relevant current density. However, the low selectivity of the CO 2 reduction reaction (CO 2 RR) still hinders practical applications. The selectivity of the CO 2 RR highly depends on the electrocatalyst. Sn catalysts are considered promising cathode materials for the production of formic acid. The selectivity of Sn catalysts can be regulated by controlling their morphology or alloying them with secondary metals. In this work, we enhanced the selectivity of CO 2 reduction to formic acid by synthesizing Sn–Cu@Sn dendrites that have a core@shell architecture. The Sn–Cu@Sn dendrites were prepared by a scalable electro-deposition method. The electronic structure was modified to suppress a reaction pathway for CO production on the Sn surface. Notably, the Sn shell inhibited the cathodic corrosion of Cu during the CO 2 RR. On a gas diffusion electrode, the Sn–Cu@Sn dendrites exhibited 84.2% faraday efficiency to formic acid for 120 h with high stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

An Acid-Free, Temperature-Based Cation Contamination Removal Strategy for PEM Water Electrolysis

It is widely understood that the durability and reliability of polymer electrolyte membrane (PEM) water electrolyzers are heavily dependent on feedwater purity, with cation contaminants that originate from incomplete water purification and balance of plant materials significantly harming electrolyzer performance. However, contamination remains a challenge and a common cause of failure at the stack level, indicating the need for strategies to recover the performance of contaminated cells. In this study, we investigate the effects of temperature on the uptake, electrochemical impacts, and removal of contaminant calcium and iron cations. Lower operating temperatures increase the sensitivity of the cell performance to contaminant cations, while also decreasing cation uptake and promoting contaminant removal. Computational charge transfer modelling shows that lower temperature increases the concentration of contaminant at the cathode and facilitates their removal from the cell. By testing single cells under scenarios designed to mimic stack temperature dynamics, we investigate low-temperature operation as an approach to stack-relevant contaminant recovery. Together, these results demonstrate that the low-temperature recovery approach is a promising approach for acid-free contamination recovery for PEM water electrolysis to promote stack reliability and durability.

08 HYDROGEN↗
DOE OSTI2026

Engineering CoO x ‑Based Self-Supported Anodes for Pure-Water-Fed Anion-Exchange-Membrane Electrolysis

Commercial membrane electrolyzers rely on acidic fluorocarbon membranes and ionomers, requiring the use of expensive IrO x -based oxygen-evolution catalysts. Anion-exchange-membrane water electrolyzers (AEMWEs) operate in an alkaline environment, enabling the use of non-precious-metal catalysts. Here, we study and engineer CoO x -based catalyst-coated anodes deposited via hydrothermal synthesis directly onto porous transport layers both with and without thermal annealing. The self-supported, nanoneedle-structured Co3O4 anode, formed by annealing the as-synthesized cobalt carbonate hydroxide, Co­(CO3) x (OH) y , outperforms the baseline Co3O4 nanoparticle ink-based anode in pure-water-fed AEMWE due to the improved catalyst-layer continuity and thus number of electroactive Co species. The as-synthesized and unannealed Co­(CO3) x (OH) y , however, appears to undergo substantial conversion to a more-active CoO x (OH) y phase predominantly at the surface, with nominal Co3+ present and higher electrical conductivity, lowering the cell voltage to ∼200 mV at 1.0 A·cm–2 in pure-water-fed AEMWE compared to the conventional Co3O4 nanoparticle anodes. We analyze the differences in electrode electrochemical response between pure-water and KOH feed modes, finding distinct activation and degradation modes. The Co­(CO3) x (OH) y anode shows significant activation and slower degradation linked to the conversion to oxyhydroxide. We propose catalyst layer designs that promote both hydroxide and electron transport, alongside interfacial engineering strategies to obtain high performance while mitigating anode degradation.

anion-exchange-membrane water electrolysis↗