Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ASH CONTENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Relationship of Coke Reactivity and Critical Coke Properties

The gasification reactions of five metallurgical cokes were studied using a thermogravimetric analyzer at 1273 K and 1673 K in CO{sub 2}-CO-N{sub 2} gas mixture. The results show that these cokes showed different reactivities in the gasification reactions. Properties that potentially influence coke reactivity including ash content, catalytic index, surface area, and crystallite size were measured and correlated with reactivity. The results indicate that reactivity had a good correlation with ash content, catalytic index, and crystallite size. The effect of surface area on coke reactivity was marginal. Coke reactivity was positively affected by catalytic index but inversely affected by ash content. Although crystallite size inversely affected reactivity, the reaction rate at the initial stage was more predominantly influenced by the mineral matter. Therefore, the influence of surface area and crystallite size was overshadowed by the impact of ash content and catalytic index at the initial stage of reaction.

36 MATERIALS SCIENCE↗

Pyrolysis of waste animal fats in a fixed-bed reactor: Production and characterization of bio-oil and bio-char

Highlights: • Produced bio-fuels (bio-oil and bio-char) from some animal fatty wastes. • Investigated the effects of main parameters on pyrolysis products distribution. • Determined the suitable conditions for the production of the maximum of bio-oil. • Characterized bio-oils and bio-chars obtained from several animal fatty wastes. - Abstract: Several animal (lamb, poultry and swine) fatty wastes were pyrolyzed under nitrogen, in a laboratory scale fixed-bed reactor and the main products (liquid bio-oil, solid bio-char and syngas) were obtained. The purpose of this study is to produce and characterize bio-oil and bio-char obtained from pyrolysis of animal fatty wastes. The maximum production of bio-oil was achieved at a pyrolysis temperature of 500 °C and a heating rate of 5 °C/min. The chemical (GC–MS analyses) and spectroscopic analyses (FTIR analyses) of bio-oil showed that it is a complex mixture consisting of different classes of organic compounds, i.e., hydrocarbons (alkanes, alkenes, cyclic compounds…etc.), carboxylic acids, aldehydes, ketones, esters,…etc. According to fuel properties, produced bio-oils showed good properties, suitable for its use as an engine fuel or as a potential source for synthetic fuels and chemical feedstock. Obtained bio-chars had low carbon content and high ash content which make them unattractive for as renewable source energy.

09 BIOMASS FUELS↗

Identification of biomass fractions responsible for wear on biomass processing equipment

Abstract: There is a current problem in the DOE supported Integrated Bio refineries where metal parts, including grinder blades and pneumatic ducting, are wearing out too early in the lifetime of the equipment. Repairing and replacing the equipment leads to unexpected equipment costs and the complete shutdown of the affected production lines.. It is believed that the ash content of the biomass is the likely cause of the wear on the metals. To address this ongoing problem, INL staff are analyzing the wear of metals caused by interactions with biomass . A sandblaster was modified to shoot ground biomass at metal coupons to simulate the wear that is occurring in the bio refineries. This system was able to test several variables including which biomass causes erosive and abrasive wear, impingement angle, particle densities of the biomass, and how the quantity of mass impacts the wear of the metals. Coupon mass loss after blasting was used to evaluate the wear caused by different biomass fractions. It was determined that the bark fraction of biomass caused the most wear and the whitewood fraction caused the least wear. Coupon mass loss in logging residues was found to be positively correlated with ash content, indicating that the ash content in the biomass is responsible for wear. It was also found that hand separated forest residues, sodium, aluminum and iron were positively correlated with wear, while silicon showed no correlation with wear.

09 BIOMASS FUELS↗

Performance and Emissions Control of Commercial-Scale Biochar Production Unit

Abstract. Two commercial biochar production machines – a single-auger unit and a larger dual-auger version – were operated to evaluate feedstock specifications, biochar quality, throughput rates, and emissions profiles. Biochar was produced from woody biomass feedstocks of various species, contamination levels, comminution methods, and moisture contents. Feedstocks with ash content exceeding 15% dry basis or moisture content exceeding 25% wet basis were observed to decrease fixed carbon content of biochar and to increase the labor effort required to operate the machine. The dual-auger version of the machine was able to process 380 kg h -1 of biomass feedstock (dry basis) to produce 63 kg h -1 of biochar with a mean electricity demand of 4.5 kW. Average CO, propane, NO x , and SO 2 emission rates from the flare of this machine were measured to be 160, 120, 51, and 43 g h -1 , respectively, with total particulate matter (PM), PM 10 , and PM 2.5 emission rates of 380, 40, and 4.5 g h -1 , respectively. Results from these experiments indicate that high-quality biochar can be produced from a variety of feedstocks, including forest residuals, as long as the ash and moisture content are within the specifications. Future research and development should focus on increasing the throughput of the machine, implementing an automated control system to reduce the operational effort, and improving safety and product consistency. Keywords: Biochar, Biomass, Biomass conversion technology, Carbon sequestration, Forest residuals, Gasification, Pyrolysis.

Agriculture↗

The use of commercial and industrial waste in energy recovery systems - A UK preliminary study

Highlights: > Commercial and industrial waste samples collected. > Samples analysed for calorific value, moisture, ash and elemental composition. > Values similar to those of municipal solid waste and refuse derived fuel. > Sampled waste could be used in current energy recovery systems with minimal retrofitting. > Sampled waste could account 6.5% towards the UK's 2020 renewable electricity target if all qualifying waste is used. - Abstract: With 2020 energy targets set out by the EU fast approaching, the UK is trying to source a higher proportion of its energy from renewable resources. Coupled with this, a growing population and increasing trends in consumer demand have resulted in national waste loads increasing. A possible solution to both issues is energy-from-waste (EfW) technologies. Many studies have focused on municipal solid waste (MSW) as a potential feedstock, but appear to overlook the potential benefits of commercial and industrial waste (C and IW). In this study, samples of C and IW were collected from three North West waste management companies and Lancaster University campus. The samples were tested for their gross and net calorific value, moisture content, ash content, volatile matter, and also elemental composition to determine their suitability in EfW systems. Intra-sample analysis showed there to be little variation between samples with the exception two samples, from waste management site 3, which showed extensive variation with regards to net calorific value, ash content, and elemental analysis. Comparisons with known fuel types revealed similarities between the sampled C and IW, MSW, and refuse derived fuel (RDF) thereby justifying its potential for use in EfW systems. Mean net calorific value (NCV) was calculated as 9.47 MJ/kg and concentrations of sulphur, nitrogen, and chlorine were found to be below 2%. Potential electrical output was calculated using the NCV of the sampled C and IW coupled with four differing energy generation technologies. Using a conventional incinerator with steam cycle, total electrical output was calculated as 24.9 GWh, based on a plant operating at 100,000 tpa. This value rose to 27.0 GWh when using an integrated gasification combined cycle. A final aspect of this study was to deduce the potential total national electrical output if all suitable C and IW were to be used in EfW systems. Using incineration coupled with a steam turbine, this was determined to be 6 TWh, 1.9% of the national demand thereby contributing 6.5% towards the UK's 2020 renewable electricity target.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Wear and Why? How Ash Elements Can Help Define Wear Profiles of Biomass Feedstocks

Biomass feedstocks have been shown to cause high wear rates on biomass processing equipment, including grinders, pneumatic conveyance systems, and screw feeders. Previously, wear rates were positively correlated with ash concentrations. Physical and chemical properties, including ash content, vary across the anatomy of plants in biomass feedstocks. To better understand biomass tissues that cause the most wear, anatomical fractions of pine forest residues were tested for wear properties. Fractions were tested in the Accelerated Wear Testing Apparatus using steel coupon mass loss to evaluate wear rates. Extrinsic ash was extracted and characterized. Total ash content of the forest residue was 0.80wt%. Anatomical fractions showed varied amounts of ash with highest concentrations in bark and needles (2.33wt%, 3.52wt%, respectively). The wear rate of the forest residue was 2.36mg loss per kg biomass. Low ash fractions, including whitewood and cambium, caused little wear. Bark had lower ash than the needles but resulted in more wear (8.63 vs 5.57mg loss per kg biomass). Bark contained the most extrinsic ash and largest ash particle size, while needles contained the least extrinsic ash and smallest ash particle size. These findings indicate that total ash content (intrinsic plus extrinsic), soil contamination, and elemental analysis can provide information related to wear properties of biomass materials; however, these analyses do not fully explain the differences observed in the wear rates of bark and needles. Additional testing is to determine other parameters of importance.

Lacey, Jeffrey A.↗

Development of a sintering process for recycling oil shale fly ash and municipal solid waste incineration bottom ash into glass ceramic composite

Highlights: • Glass ceramic composite is prepared from oil shale fly ash and MSWI bottom ash. • A novel method for the production of glass ceramic composite is presented. • It provides simple route and lower energy consumption in terms of recycling waste. • The vitrified slag can promote the sintering densification process of glass ceramic. • The performances of products decrease with the increase of oil shale fly ash content. - Abstract: Oil shale fly ash and municipal solid waste incineration bottom ash are industrial and municipal by-products that require further treatment before disposal to avoid polluting the environment. In the study, they were mixed and vitrified into the slag by the melt-quench process. The obtained vitrified slag was then mixed with various percentages of oil shale fly ash and converted into glass ceramic composites by the subsequent sintering process. Differential thermal analysis was used to study the thermal characteristics and determine the sintering temperatures. X-ray diffraction analysis was used to analyze the crystalline phase compositions. Sintering shrinkage, weight loss on ignition, density and compressive strength were tested to determine the optimum preparation condition and study the co-sintering mechanism of vitrified amorphous slag and oil shale fly ash. The results showed the product performances increased with the increase of sintering temperatures and the proportion of vitrified slag to oil shale fly ash. Glass ceramic composite (vitrified slag content of 80%, oil shale fly ash content of 20%, sintering temperature of 1000 °C and sintering time of 2 h) showed the properties of density of 1.92 ± 0.05 g/cm{sup 3}, weight loss on ignition of 6.14 ± 0.18%, sintering shrinkage of 22.06 ± 0.6% and compressive strength of 67 ± 14 MPa. The results indicated that it was a comparable waste-based material compared to previous researches. In particular, the energy consumption in the production process was reduced compared to conventional vitrification and sintering method. Chemical resistance and heavy metals leaching results of glass ceramic composites further confirmed the possibility of its engineering applications.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Air gasification of biogas-derived digestate in a downdraft fixed bed gasifier

Highlights: • Air gasification of digestate with high ash content was studied in detail. • Compared to original biomass, less tar was observed in digestate gasification process. • Improved molar ratio of H{sub 2}/CO potential for chemical synthesis was gained at 800 °C. • The by-products (biochar and ash) can be land applied as fertilizer. - Abstract: Digestate is a byproduct from biomass anaerobic digestion process. Gasification of dried digestate to produce gasesous product might be a promising route. In this work, air gasification of digestate with high ash content was performed in a downdraft fixed bed gasifier at temperature varying from 600 °C to 800 °C and air equivalence ratio (ER) ranging from 0.25 to 0.30. The ash melting properties were firstly detected by the Intelligent Ash Melting Point Test, and the by-products (biochar and ash) were analyzed. The results showed that no ash slagging was observed and therefore it is feasible to operate digestate gasification under 800 °C and ER ranging from 0.25 to 0.30. High temperature favored gas production, 800 °C is proposed for digestate gasification in the present study. ER with a medium value improved gas quality and cold gas efficiency (CGE), and the optimal LHV of 4.78 MJ/N m{sup 3} and CGE of 67.01% were obtained with ER of 0.28. High ER favored the increase of gas yield and decrease of tar concentration, and the optimal gas yield of 2.15 N m{sup 3}/kg and tar concentration of 1.61 g/N m{sup 3} were achieved with ER of 0.30. Improved molar ratio of H{sub 2}/CO varying from 1.03 to 1.08 was obtained at 800 °C, indicating gaseous product has the potential for chemical synthesis processes (1 < H{sub 2}/CO < 2). The byproducts biochar and ash could be applied on land as fertilizer.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Impact of Tree Age and Anatomical Fraction on Forest Residue Pyrolysis and Hydrotreating

Utilization of cost-advantaged biomass and waste resources to produce clean, domestic biofuels will be a key factor in decarbonizing transportation in the United States. This study investigates how the distribution of anatomical fractions (stem wood, bark, needles, branches) from pine forest residues of different ages impacts pyrolysis and hydrotreating processes, including product composition, carbon efficiency, economics, and overall sustainability. Commercially sourced 13- and 23-year-old loblolly pine residues were chosen to represent available resources; whole tree thinnings, and tops and branches from merchantable timber, respectively. Detailed characterization of the residue samples, product distributions, bio-oil, char, and gas characterization data are presented for 13 experiments, including the individual fractions, blends, and air-classified samples to reduce ash content. Pyrolysis mass balances averaged 97 +/- 3%. As expected, bio-oil yields were lower for the bark, needles, and blends with high proportions of these (53-56% dry basis), and highest for the debarked stem wood (67-71% dry basis). Lower yields were attributed to the high ash content of the needles, but also to the high lignin content in the bark (>50%), which is hypothesized to have led to increased char formation during pyrolysis. Higher-oil yield was generally correlated with total volatiles, hydrogen, oxygen, glucan, and mannan; somewhat correlated with xylan and acetyl content; and negatively correlated with total carbon, fixed carbon, nitrogen, sulfur, and extractives. Air classification of the residues was effective in reducing ash content (1.5% to 0.64%), extractives (~7% to 2%), and sulfur (0.04% to 0.02%), resulting in a small increase in yield, a significant increase in the GC-detectable proportion of oil (27% to 34%) and a net economic benefit. These experimental results were used to conduct technoeconomic and life cycle analyses, which are also summarized here.

biofuels↗

Application of air classification and formulation to manage feedstock cost, quality and availability for bioenergy

Biomass such as agricultural residues, energy crops and yard waste has significant potential to be used as renewable feedstocks for production of fuels, chemicals and energy. However, in a given location, biomass availability, cost and quality can vary markedly. Strategies to manage these traits must be identified and implemented so that consistent low-cost and high-quality feedstocks can be delivered to biorefineries year round. In this study, we examine air classification as a method to mitigate high ash concentrations in corn stover, switchgrass, and grass clippings. Formulation techniques were then used to produce blends that met ash quality and biomass quantity specifications at the lowest possible cost for biopower and biochemical conversion applications. It was found that air classification can separate the biomass into light fractions which contain concentrated amounts of elemental ash components introduced through soil contamination such as sodium, alumina, silica, iron and titania; and heavy fractions that are depleted in these components and have relatively lower total ash content. Light fractions of corn stover and grass clippings were found to be suitable for combustion applications since they had less propensity to slag than the whole biomass material. The remaining heavy fractions of corn stover or grass clippings could then be blended with switchgrass to produce blends that met the 5% total ash specifications suggested for biochemical conversions. However, ternary blends of the three feedstocks were not possible due to the high ash content of grass clippings. Lastly, it was determined that air classification by itself was not suitable to prepare these feedstocks for pyrolysis due to high ash content.

09 BIOMASS FUELS↗

Pre-Combustion Technique for Desulphurization of Waterberg Coalfield: Biological Treatment - 18444

The current study evaluates a microbial desulphurization of medium - sulphur type coal containing total sulphur (1.45 wt.%) and pyritic sulphur (≥ 0.51 wt. %) as a pre-combustion technique. Coal sample containing particle size in the range of - 0.85 mm was used in the experiments with bacteria isolated from nearby stockpiles of newly commissioned South African National Power Utility's (Eskom's) Medupi Power Station. After a stipulated hydraulic retention time (HRT), the coal samples were filtered, washed, dried and analyzed for total sulphur, ash content and calorific values. The calorific value of the coal significantly improved from 20.42 MJ/Kg to 24.16 MJ/Kg on the 5. day. The process removed up to 72% of the total sulphur content in the coal samples at a HRT of day 9. Furthermore, ash content reduced by 16%. This study provides a novel breakthrough of an alternative microbial desulphurization process of Waterberg steam coal as a further pre-treatment technique in order to meet stringent environmental emissions standards for SO{sub 2}. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of Curing Temperature and Composition on the Performance Properties of Saltstone - 12473

When freshly mixed Saltstone is placed into a vault at the Savannah River Site, the heat of hydration produced during curing causes the temperature of the grout to increase. It is not uncommon for the temperature of the grout to increase by 30 to 50 deg. C above the starting temperature depending on the vault size and location, environmental conditions and pour schedule. For example, temperatures measured by thermocouples in one cell have exceeded 70 deg. C. The elevated temperatures, once reached, can extend for weeks or even months. Recent studies at Savannah River National Laboratory (SRNL) have shown that curing simulated Saltstone mixes at elevated temperatures can lead to reduced compressive strength and dynamic Young's modulus as well as increased total porosity when compared to the same grout mixes cured at 20 deg. C. Samples cured at 60 deg. C can have hydraulic conductivities approximately 600 times greater than samples cured at 20 deg. C. Previous studies have shown that the 60 deg. C cured mix had a dynamic Young's modulus that was half that of the mix cured at 20 deg. C. However, high temperature curing may not always have negative effects on the performance properties of the grout. These results indicate that higher curing temperatures can significantly alter the performance properties that are inputs for the Saltstone Performance Assessment. The Saltstone formulation (mix design) must produce a grout waste form that meets both placement and performance properties. A statistically designed set of mixes was developed to determine key process and compositional factors that affect the performance properties of Saltstone grout. A total of 27 mixes were batched and tested. There are eight baseline mixes that contain high and low values of aluminate concentration, varying w/p ratio, and varying fly ash content in the premix. Each of the eight mixes was cured at 22, 40 and 60 deg. C. The three additional reference mixes batched at the beginning, middle and end of testing showed good reproducibility throughout the study. The results of varying the operational and compositional factors on the performance properties of Saltstone grout are: - The Young's modulus is inversely affected by the curing temperature of the grout. - The aluminate content of the salt solution increases the Young's modulus of the Saltstone for samples cured at 20 and 40 deg. C. - All grouts cured at 60 deg. C have low Young's moduli and the composition of the grout mix did not have any positive effects on the performance properties after curing at this temperature. - The fly ash content in the premix had not discernible effect on the Young's modulus. - The water to premix ratio does not affect the Young's modulus. - Grouts made with the high aluminate salt solution have lower hydraulic conductivities than those made with the low aluminate simulant. - Temperature has an inverse effect on the hydraulic conductivity. - In general, increasing the water to premix ratio and the fly ash content will increase the hydraulic conductivity. - The porosity and cured density of the Saltstone grout are primarily a factor of the water to premix ratio of the grout formulation. The correlation between hydraulic conductivity and Young's modulus investigated in previous studies was evaluated further in this report. The current data as well as data from previous studies was fitted by a second degree polynomial function with a 77.1 % R-squared value. This model can be used to estimate the hydraulic conductivity of a sample based its Young's modulus for a limited range (E values up to 7 GPa). More data points should be included to further define the relationship between these performance properties are high Young's moduli and low hydraulic conductivities. The Young's modulus should still be measured on grouts formulated in future studies to be used as screening method for samples to be sent for hydraulic conductivity measurements. Saltstone grout has a complicated microstructure that is affected by the composition of the salt solution, the dry feed mixture composition, and the conditions under which it cures. The performance properties investigated are interrelated, which can make it difficult to determine individual relationships between various factors. Porosity is a large factor in determining both the Young's modulus and the hydraulic conductivity of the samples. Although the cured density is a straightforward measurement, it is not a significant performance property that needs further investigation. The porosity measurement provides similar and more meaningful data in relation to other performance properties. Based on the results of this study, the aluminate content of the salt solution does have an effect on the Young's modulus and the hydraulic conductivity and its effects should continue to be investigated. However, a new projection of aluminate contents should be used since projections change over time. The variability of fly ash in the premix did not prove to be a contributing factor that effects the performance properties of Saltstone and does not need to be included in future studies unless significant deviations from the baseline mix are proposed. The water to premix ratio has a significant effect on the performance properties of interest and the effects of varying this factor need further investigation. It is recommended that smaller ranges of w/p are investigated in order to provide data that is more relevant to the Saltstone being placed in the vaults. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Distribution of rare earth elements in fly ash derived from the combustion of Illinois Basin coals

This study examined rare earth element (REE) trends for Illinois Basin coal-sourced fly ashes, with the goal of understanding the elemental composition and resource potential for various fly ash fractions. Illinois Basin coals have a high volatile C through A bituminous rank with a moderate ash content (slightly>12% ash (dry basis)), about 3% sulfur, and, in general, lower concentrations of hazardous and other trace elements than many Central Appalachian coals. Fly ash from the combustion of Illinois Basin coals tends to have a high Fe 2 O 3 content owing to the amount of pyrite in the feed coals. The rare earth element (REE) concentrations in Illinois Basin coal-sourced fly ashes are less than that for fly ashes from the combustion of Central Appalachian coals. The Upper continental crust-corrected fly ashes show an H-type enrichment, a positive Eu N /Eu N * , and, in some cases, a sharp Gd peak. For comparison, a suite of fly ashes from the combustion of a blend of eastern Kentucky coals had an H-type enrichment, a positive Eu N /Eu N * , but only a minimal Gd peak. In contrast, fly ash from the combustion of the Fire Clay coal, a REE-rich coal, had a negative Eu N /Eu N * and a sharp Gd peak. Finally, these results highlight the importance of feed coal composition on trace element contents of respective combustion fly ash fractions and also the unique REE enrichment patterns of the Illinois Basin fly ashes relative to the better studied fly ashes of eastern Kentucky and Central Appalachia.

01 COAL, LIGNITE, AND PEAT↗

A Field Survey of Rare Earth Element Concentrations in Process Streams Produced by Coal Preparation Plants in the Eastern USA

I this work, a field study was undertaken to experimentally measure the concentrations of rare earth elements (REEs) contained in the process streams generated by a group of 20 coal preparation plants located in the eastern USA. For each site, representative samples of clean coal product, coarse refuse, and fine refuse were collected. Each sample was then partitioned into preselected size and density classes by wet screening/sieving and float-sink testing. The resultant products were dried and subjected to laboratory analyses to determine ash contents and rare earth element concentrations including Yttrium and Scandium. A detailed analysis of the database generated by this exercise showed that coal-based products from these preparation plants contained significant quantities of rare earth elements. In particular, the coarse refuse streams currently discarded by the 20 plants examined were found to contain a sufficient tonnage of REEs to satisfy the current domestic demand for these important elements. The data also showed a strong positive correlation between ash content and REE concentration, which suggested that the primary association of REEs in eastern USA bituminous coal sources is likely within fractions containing inorganic impurities. This association was well described using a simple power equation relating ash content and REE concentration. The ratio of heavy-to-light rare earth elements was discovered to be significantly higher in organically rich fractions of clean coal, suggesting that mineral impurities intimately associated with carbonaceous matter have elevated concentrations of heavy rare earth elements. A similar trend was observed for a grouping of rare earth elements (Y, Nd, Eu, Tb, and Dy) that are likely subject to near-term supply shortages. Finally, the database showed that a linear correlation existed between La for many REEs of interest, although there were several notable exceptions for some high-value REEs (Lu, Pr, and Tb).

01 COAL, LIGNITE, AND PEAT↗

Effect of ash in paper sludge on enzymatic hydrolysis

The valorization of paper sludge is a high-potential process to develop renewable fuels and chemicals, which can be integrated with pulp and paper mills. Calcium carbonate is the main ash component in sludge, which plays a role in buffering pH and potentially lowering the conversion during enzymatic hydrolysis. Therefore, it is important to investigate the effect of ash on sugar yields and examine pH change to introduce efficient and economical enzymatic hydrolysis of sludge. Carbohydrate conversion was enhanced when the ash was removed by fractionation. On the other hand, the highest sugar recovery was obtained when the sludge contained 20% ash content. The pH change during enzymatic hydrolysis was influenced by ash and explained why sludge-derived hydrolysate showed lower carbohydrate conversion. Therefore, a high shear process with the increased acid amount is suggested to prohibit the negative effect of ash and enhance the accessibility of cellulase to fibers. Finally, this study highlights the feasibility of using wet waste streams generated by the paper industry.

09 BIOMASS FUELS↗

Influence of the Feedstock on Catalytic Fast Pyrolysis with a Solid Acid Catalyst

Abstract At RTI, we are developing a catalytic fast pyrolysis process with a new solid acid catalyst, the performance of which has been evaluated in a pilot‐scale reactor using loblolly pine. More robust technology development requires a deeper understanding of the influence of the feedstock properties of process performance defined by the organic liquid yield and composition. Seven types of woody and herbaceous biomass were tested in a 2.54 cm diameter fluidized‐bed reactor. This study shows that the product distribution and biocrude composition vary widely with different feedstocks. The yield of organic biocrude is in the range of 14.0–20.8 wt % for the tested feedstocks. The yields of incondensable gases and carbonaceous solids vary significantly from feedstock to feedstock, which may be because of the variation of the ash content in the feedstock. A feedstock with a higher ash content generates more gases; specifically more CO 2 but not necessarily more CO. The chemical composition, which includes lignin, hemicellulose, and cellulose, also affects the biocrude composition and the yield of gases. We also demonstrated a positive correlation between the cellulose content and CO yield and a negative correlation between the hemicellulose content and CO yield.

Wang, Kaige↗

Sources of biomass feedstock variability and the potential impact on biofuels production

In this study, terrestrial lignocellulosic biomass has the potential to be a carbon neutral and domestic source of fuels and chemicals. However, the innate variability of biomass resources, such as herbaceous and woody materials, and the inconsistency within a single resource due to disparate growth and harvesting conditions, presents challenges for downstream processes which often require materials that are physically and chemically consistent. Intrinsic biomass characteristics, including moisture content, carbohydrate and ash compositions, bulk density, and particle size/shape distributions are highly variable and can impact the economics of transforming biomass into value-added products. For instance, ash content increases by an order of magnitude between woody and herbaceous feedstocks (from ~0.5 to 5 %, respectively) while lignin content drops by a factor of two (from ~30 to 15 %, respectively). This increase in ash and reduction in lignin leads to biofuel conversion consequences, such as reduced pyrolysis oil yields for herbaceous products as compared to woody material. In this review, the sources of variability for key biomass characteristics are presented for multiple types of biomass. Additionally, this review investigates the major impacts of the variability in biomass composition on four conversion processes: fermentation, hydrothermal liquefaction, pyrolysis, and direct combustion. Finally, future research processes aimed at reducing the detrimental impacts of biomass variability on conversion to fuels and chemicals are proposed.

09 BIOMASS FUELS↗

Liberation and release of rare earth minerals from Middle Kittanning, Fire Clay, and West Kentucky No. 13 coal sources

Here, a laboratory REE release test procedure was designed to better understand the association and liberation characteristics of rare earth elements (REEs) from coal-based material, such as coal middlings and refuse. For this particular study, three samples of mixed-phase, middling material was collected from three coal preparation plants operating in three different coal basins and coal seams, namely Fire Clay, Middle Kittanning, and West Kentucky #13. In these release tests, the mixed-phase material was first ground in a laboratory ball mill for a designated amount of time and subsequently decarbonized using staged flotation. The REE content of the high ash tailings and low ash concentrate was determined, and the process was repeated for various target grind sizes down to the micron range. The results indicate that smaller grind sizes produce increased REE concentrations in the high ash tailings, and this result is predominantly driven by the increased ash content in the decarbonized tailings. The grinding characteristics of the Fire Clay coal source showed that more energy is needed to achieve the desired particle size reduction; however further size reduction of this sample resulted in a significantly higher ash and REE content in the tailings material due to improved liberation. For the Middle Kittanning and West Kentucky #13 sources, the grinding and release data indicates that the mineral matter is liberated at a coarser particle size, and micronizing the coals only produces marginal improvements in rare earth mineral liberation and recovery.

01 COAL, LIGNITE, AND PEAT↗