Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIC 75”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Isotopic Abundances and Ratios in Arsenic Irradiated by High-Energy Neutrons

This document provides derivations of the 73 As, 74 As and 75 As isotopic abundances and ratios in an arsenic sample irradiated by high-energy (14 MeV) neutrons for 0 ≤ t ≤ T, where T is short compared to the natural decay times of the reaction products (t 1/2 ( 73 As) ~ 80.3 d, t 1/2 ( 74 As) ~ 17.8 d). The document also outlines the historic approach used to analyze arsenic data from experiments.

07 ISOTOPE AND RADIATION SOURCES↗

Extraction of selenium and arsenic with TOA-impregnated XAD-2 resin from HCl

Here the uptake of 75 Se and 73 As on trioctylamine-impregnated resin from HCl solutions was studied with batch uptake, kinetics, and column studies. Selenium-75 extracts well (D w ~ 900) at high HCl concentrations (≥ 10 M) with and no extraction of 73 As at any HCl concentration. The uptake kinetics were slow with low extraction (D w < 100) for time periods ≤ 15 min and no clear equilibrium achieved even after 24 h. Column studies were performed to characterize the separation of 75 Se and 73 As; 75Se is retained from conc. HCl while arsenic is eluted with high yields and high radiopurity.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Arsenic, lead, mercury and cadmium: Toxicity, levels in breast milk and the risks for breastfed infants

Metals are ubiquitous in nature, being found in all environmental compartments, and have a variety of applications in human activities. Metals are transferred by maternal blood to the fetus via the placenta, and exposure continues throughout life. For the general population, exposure comes mainly from water and food consumption, including breast milk. In this paper, we reviewed studies on the toxicity of arsenic, lead, mercury and cadmium, the toxic metals of most concern to human health, focusing on the potential risks to newborns and infants. A total of 75 studies published since 2000 reporting the levels of these metals in breast milk were reviewed. Lead was the metal most investigated in breast milk (43 studies), and for which the highest levels were reported (up to 1515 µg/L). Arsenic was the least investigated (18 studies), with higher levels reported for breast milk (up to 149 µg/L) collected in regions with high arsenic concentrations in water (>10 µg/L). Data from 34 studies on mercury showed that levels in breast milk were generally higher in populations with high fish consumption, where it may be present mainly as MeHg. Cadmium levels in breast milk were the lowest, with means <2 µg/L in most of the 29 studies reviewed. Results of risk assessments indicated that the intake of arsenic, lead and mercury by infants through breastfeeding can be considered a health concern in most regions of the world. Although the potential risks to infants are mostly outweighed by the benefits of breast milk consumption, it is essential that contaminants be continuously monitored, especially in the most critical regions, and that measures be implemented by health authorities to reduce exposure of newborns and infants to these metals, and thus avoid unnecessary health risks. - Highlights: • Review of 75 studies that analyzed arsenic, lead, mercury and/or cadmium levels. • Higher levels of arsenic found in India; of mercury found in Brazil. • Lead was the most detected in the studies; cadmium levels were the lowest. • Risk for breastfed babies cannot be excluded for arsenic, lead and mercury. • Risks are unavoidable, and outweighed by the benefits of breastfeeding.

54 ENVIRONMENTAL SCIENCES↗

New Arsenic Cross Section Calculations

This report presents calculations for the new arsenic cross section. Cross sections for 73,74,75 As above the resonance range were calculated with a newly developed Hauser-Feshbach code, CoH3.

42 ENGINEERING↗

Uptake of arsenic and selenium on iron-doped Pb resin

We report the uptake of the radioisotopes 73 As and 75 Se was characterized on Fe 3+ -doped Pb resin (Eichrom Technologies) from pH 1 to 12. There is good uptake of arsenic and selenium over a wide pH range (~ 1 to 10) with a decrease only at high pH (~ 12). Column experiments were performed to demonstrate the separations of these elements from solutions with near neutral pH values (~ 6 to 8) with high yields and high radiopurity. These separations may be relevant for a wide variety of applications especially isotope harvesting research.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Selective detection of heavy metal ions by self assembled chemical field effect transistors

Multiple layer-by-layer sensor material modifications were designed and implemented to achieve selectivity of semiconductor based chemical field effect transistors (ChemFETs) to particular heavy metal ions. The ChemFET sensors were fabricated and modified in three ways, with the intent to initially target first mercury and lead ions and then chromium ions, respectively. Sensor characterization was performed with the gate regions of the sensor elements exposed to different concentrations of target heavy metal ion solutions. A minimum detection level in the range of 0.1 ppm and a 10%–90% response time of less than 10 s were demonstrated. By combining layer-by-layer gold nanoparticles and lead ionophores, a sensor is produced that is sensitive and selective not only to chromium but also to Cr{sup 3+} and Cr{sup 6+}. This result supports the claim that high selectivity can be achieved by designing self-assembled bonding for lead, arsenic, chromium, cesium, mercury, and cadmium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Room temperature detection of NO{sub 2} using InSb nanowire

Room temperature detection of NO{sub 2} down to one part-per-million (ppm) using single crystalline n-type InSb nanowires (NWs) chemiresistive gas sensor is presented. These sensors were synthesized and fabricated by the combination of chemical vapor deposition and dielectrophoresis alignment techniques. The sensor devices showed an increase in resistance upon exposure to successive increments of NO{sub 2} concentration up to 10 ppm. The reduction in conductance of n-type InSb NWs when exposed to NO{sub 2} is made possible due to the charge transfer from the InSb NW surface to the adsorbed electron acceptor NO{sub 2} molecules. The demonstrated results suggest InSb NW as a promising candidate in sensing applications as well as being environmental friendly over existing arsenic and/or phosphorous-based III-V NW sensors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Composition determination of quaternary GaAsPN layers from single X-ray diffraction measurement of quasi-forbidden (002) reflection

GaAsPN layers with a thickness of 30 nm were grown on GaP substrates with metalorganic vapor phase epitaxy to study the feasibility of a single X-ray diffraction (XRD) measurement for full composition determination of quaternary layer material. The method is based on the peak intensity of a quasi-forbidden (002) reflection, which is shown to vary with changing arsenic content for GaAsPN. The method works for thin films with a wide range of arsenic contents and shows a clear variation in the reflection intensity as a function of changing layer composition. The obtained thicknesses and compositions of the grown layers are compared with accurate reference values obtained by Rutherford backscattering spectroscopy combined with nuclear reaction analysis measurements. Based on the comparison, the error in the XRD defined material composition becomes larger with increasing nitrogen content and layer thickness. This suggests that the dominating error source is the deteriorated crystal quality due to the nonsubstitutional incorporation of nitrogen into the crystal lattice and strain relaxation. The results reveal that the method overestimates the arsenic and nitrogen content within error margins of about 0.12 and about 0.025, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of the extremely arsenic-resistant Brevibacterium linens strain AE038-8 isolated from contaminated groundwater in Tucuman, Argentina

Brevibacterium linens AE038-8, isolated from As-contaminated groundwater in Tucumán (Argentina), is highly resistant to arsenic oxyanions, being able to tolerate up to 1 M As(V) and 75 mM As(III) in a complex medium. Strain AE038-8 was also able to reduce As(V) to As(III) when grown in complex medium but paradoxically it could not do this in a defined minimal medium with sodium acetate and ammonium sulfate as carbon and nitrogen sources, respectively. No oxidation of As(III) to As(V) was observed under any conditions. Here, three copies of the ars operon comprising arsenic resistance genes were found on B. linens AE038-8 genome. In addition to the well known arsC , ACR3 and arsR , two copies of the arsO gene of unknown function were detected.

54 ENVIRONMENTAL SCIENCES↗

Effects of carbon on phosphorus diffusion in SiGe:C and the implications on phosphorus diffusion mechanisms

The use of carbon (C) in SiGe base layers is an important approach to control the base layer dopant phosphorus (P) diffusion and thus enhance PNP heterojunction bipolar transistor (HBT) performance. This work quantitatively investigated the carbon impacts on P diffusion in Si₀.₈₂Ge₀.₁₈:C and Si:C under rapid thermal anneal conditions. The carbon molar fraction is up to 0.32%. The results showed that the carbon retardation effect on P diffusion is less effective for Si₀.₈₂Ge₀.₁₈:C than for Si:C. In Si₀.₈₂Ge₀.₁₈:C, there is an optimum carbon content at around 0.05% to 0.1%, beyond which more carbon incorporation does not retard P diffusion any more. This behavior is different from the P diffusion behavior in Si:C and the B in Si:C and low Ge SiGe:C, which can be explained by the decreased interstitial-mediated diffusion fraction f{sub I}{sup P,SiGe} to 95% as Ge content increases to 18%. Empirical models were established to calculate the time-averaged point defect concentrations and effective diffusivities as a function of carbon and was shown to agree with previous studies on boron, phosphorus, arsenic and antimony diffusion with carbon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Defects in Arsenic Implanted р{sup +}–n- and n{sup +}–p- Structures Based on MBE Grown CdHgTe Films

Complex studies of the defect structure of arsenic-implanted (with the energy of 190 keV) Cd{sub x}Hg{sub 1–x}Te (x = 0.22) films grown by molecular-beam epitaxy are carried out. The investigations were performed using secondary-ion mass spectroscopy, transmission electron microscopy, optical reflection in the visible region of the spectrum, and electrical measurements. Radiation donor defects were studied in n{sup +}–p- and n{sup +}–n-structures obtained by implantation and formed on the basis of p-type and n-type materials, respectively, without activation annealing. It is shown that in the layer of the distribution of implanted ions, a layer of large extended defects with low density is formed in the near-surface region followed by a layer of smaller extended defects with larger density. A different character of accumulation of electrically active donor defects in the films with and without a protective graded-gap surface layer has been revealed. It is demonstrated that p{sup +}–n- structures are formed on the basis of n-type material upon activation of arsenic in the process of postimplantation thermal annealing with 100% activation of impurity and complete annihilation of radiation donor defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the Current–Voltage Characteristics of New MnO{sub 2}/GaAs(100) and V{sub 2}O{sub 5}/GaAs(100) Heterostructures Subjected to Heat Treatment

Complex oxide films with a thickness of about 200 nm are formed during the thermal oxidation of GaAs with magnetron-deposited V{sub 2}O{sub 5} and MnO{sub 2} nanolayers. The electrical parameters of the films (reverse-bias breakdown voltage and current density) are determined by the method of current–voltage (I–V) characteristics at room temperature in the bias range from –5 to +5 V, and their composition and surface morphology are investigated. It is shown that V{sub 2}O{sub 5} facilitates the more intense (in comparison with MnO{sub 2}) chemical bonding of arsenic at the internal interface with the formation of As{sub 2}O{sub 5}. As a result, thermally oxidized V{sub 2}O{sub 5}/GaAs heterostructures exhibit higher breakdown voltages.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chalcogenide glass microlenses by inkjet printing

We demonstrate micrometer scale mid-IR lenses for integrated optics, using solution-based inkjet printing techniques and subsequent processing. Arsenic sulfide spherical microlenses with diameters of 10-350 {mu}m and focal lengths of 10-700 {mu}m have been fabricated. The baking conditions can be used to tune the precise focal length.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Uptake behavior of arsenic and selenium with sulfur-based extraction chromatography resins in HCl and HNO 3 media

Here, the uptake behavior of 73 As and 75 Se was studied in HCl and HNO3 media with CL resin, ethanethiol resin and dimethyl sulfide resin. In HCl solutions, there was high extraction of selenium on CL resin and ethanethiol resin but lower uptake on dimethyl sulfide resin; arsenic was only extracted by CL resin. From HNO 3 , selenium was extracted only by ethanethiol resin and CL resin and there was no uptake of arsenic on any resin. While the sulfur-based resins have high selenium uptake and selectivity, column separations are challenging due to the chemical instability of these resins.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

The Growth of InAs{sub x}Sb{sub 1 –x} Solid Solutions on Misoriented GaAs(001) Substrates by Molecular-Beam Epitaxy

The effect of a substrate misorientation degree from a singular face on the composition and morphology of layers of InAs{sub x}Sb{sub 1 –x} solid solutions obtained by molecular-beam epitaxy on a GaAs surface has been investigated. The substrates of GaAs wafers with the orientation (100) misoriented in the direction [110] by 0°, 1°, 2°, and 5° are used. The heterostructures are grown at temperatures of 310°C and 380°C (respectively, the lower and upper boundaries of the temperature range in which structurally perfect InAs{sub x}Sb{sub 1 –x} films form). The effect of the molecular form of arsenic (As{sub 2} or As{sub 4}) on the composition of the layers is studied. The composition and structural properties are investigated using high-resolution X-ray diffractometry (HRXRD) and atomic-force microscopy (AFM). It is established that, in the series of misorientation angles 0° → 5°, the arsenic fraction x increases consecutively when using fluxes of both As{sub 2} and As{sub 4} molecules. With the As{sub 2} molecular flux, the fraction x increases only a little (1.05 times) with increasing degree of misorientation, while, when using the As{sub 4} flux, the increase in x is 1.75 times. An increase in the growth temperature leads to growth in the arsenic fraction in the solid solution. The surface morphology improves with an increasing degree of misorientation at a low growth temperature and degrades at a high temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles core-level X-ray photoelectron spectroscopy calculation on arsenic defects in silicon crystal

We investigate the X-ray photoelectron spectroscopy (XPS) binding energies of As 3d in Si for various defects in neutral and charged states by first-principles calculation. It is found that the complexes of a substitutional As and a vacancy in charged and neutral states explain the experimentally observed unknown peak very well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impurity centers of tin in glassy arsenic chalcogenides

{sup 119}Sn atoms produced by radioactive decay of {sup 119}Sb impurity atoms in the structure of As{sub x}S{sub 1-x} and As{sub x}Se{sub 1-x} glasses are stabilized in the form of Sn{sup 2+} and Sn{sup 4+} ions at arsenic sites and correspond to ionized states of the amphoteric two-electron center with negative correlation energy (Sn{sup 2+} is an ionized acceptor, and Sn{sup 4+} is an ionized donor), whereas the neutral state of the Sn{sup 3+} center is unstable. The fraction of Sn{sup 4+} states increases with chalcogen content in glass. {sup 119}Sn atoms produced by radioactive decay of {sup 119m}Te impurity atoms in the structure of As{sub x}S{sub 1-x} and As{sub x}Se{sub 1-x} glasses are stabilized at chalcogen sites (they are electrically inactive) and arsenic sites, and the fraction of arsenic atoms decreases with the chalcogen content in glass.

36 MATERIALS SCIENCE↗

Eight-band k·p modeling of InAs/InGaAsSb type-II W-design quantum well structures for interband cascade lasers emitting in a broad range of mid infrared

Band structure properties of the type-II W-design AlSb/InAs/GaIn(As)Sb/InAs/AlSb quantum wells have been investigated theoretically in a systematic manner and with respect to their use in the active region of interband cascade laser for a broad range of emission in mid infrared between below 3 to beyond 10 μm. Eight-band k·p approach has been utilized to calculate the electronic subbands. The fundamental optical transition energy and the corresponding oscillator strength have been determined in function of the thickness of InAs and GaIn(As)Sb layers and the composition of the latter. There have been considered active structures on two types of relevant substrates, GaSb and InAs, introducing slightly modified strain conditions. Additionally, the effect of external electric field has been taken into account to simulate the conditions occurring in the operational devices. The results show that introducing arsenic as fourth element into the valence band well of the type-II W-design system, and then altering its composition, can efficiently enhance the transition oscillator strength and allow additionally increasing the emission wavelength, which makes this solution prospective for improved performance and long wavelength interband cascade lasers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗