Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AMPEROMETRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Aluminum doped nickel oxide thin film with improved electrochromic performance from layered double hydroxides precursor in situ pyrolytic route

Electrochromic materials with unique performance arouse great interest on account of potential application values in smart window, low-power display, automobile anti-glare rearview mirror, and e-papers. In this paper, high-performing Al-doped NiO porous electrochromic film grown on ITO substrate has been prepared via a layered double hydroxides(LDHs) precursor in situ pyrolytic route. The Al{sup 3+} ions distributed homogenously within the NiO matrix can significantly influence the crystallinity of Ni-Al LDH and NiO:Al{sup 3+} films. The electrochromic performance of the films were evaluated by means of UV–vis absorption spectroscopy, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and chronoamperometry(CA) measurements. In addition, the ratio of Ni{sup 3+}/Ni{sup 2+} also varies with Al content which can lead to different electrochemical performances. Among the as-prepared films, NiO film prepared from Ni-Al (19:1) LDH show the best electrochromic performance with a high transparency of 96%, large optical modulation range (58.4%), fast switching speed (bleaching/coloration times are 1.8/4.2 s, respectively) and excellent durability (30% decrease after 2000 cycles). The improved performance was owed to the synergy of large NiO film specific surface area and porous morphology, as well as Al doping stifled the formation of Ni{sup 3+} making bleached state more pure. This LDHs precursor pyrolytic method is simple, low-cost and environmental benign and is feasible for the preparation of NiO:Al and other Al-doped oxide thin film. - Graphical abstract: The ratio of Ni{sup 3+}/Ni{sup 2+} varies with Al content which can lead to different electrochemical performances. Among the as-prepared films, NiO film prepared from Ni-Al (19:1) LDH show the best electrochromic performance with a high transparency of 96%, large optical modulation range, fast switching speed and excellent durability. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancement of methanol electrocatalytic oxidation on platinized WO{sub 3}–TiO{sub 2} composite electrode under visible light irradiation

Highlights: ► A ternary composite catalyst of Pt–WO{sub 3}–TiO{sub 2} has been synthesized. ► The introduction of WO{sub 3} extends its absorption edge to visible light region. ► The electrode displays high electrocatalytic activity. ► With visible light irradiation, its electrocatalytic activity increases 70%. - Abstract: A ternary composite catalyst of Pt–WO{sub 3}–TiO{sub 2} has been successfully prepared by a chemical method. The prepared composite was systematically characterized by UV–vis diffuse reflectance absorption spectra (DRS), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM). The electrocatalytic properties of Pt–WO{sub 3}–TiO{sub 2} for methanol oxidation in an alkaline medium were evaluated by the cyclic voltammetry (CV) and chronoamperometry (CA) with or without visible light irradiation. Compared with the pure TiO{sub 2}, the introduction of WO{sub 3} extends its absorption edge to visible light region. Under visible light illumination, the Pt–WO{sub 3}–TiO{sub 2} composite catalyst exhibits higher electrocatalytic activity toward methanol oxidation in comparison with its counterpart, the pure Pt–TiO{sub 2} catalyst.

36 MATERIALS SCIENCE↗

MoS{sub 2} nanosheet functionalized with Cu nanoparticles and its application for glucose detection

Graphical abstract: - Highlights: • First report on decorating MoS{sub 2} nanosheet with Cu nanoparticles by chemical reduction. • Cu nanoparticles were uniformly decorated on MoS{sub 2} nanosheet. • Glucose biosensor based on copper nanoparticles-MoS{sub 2} nanosheet hybrid is fabricated. • The biosensor exhibits high sensitivity. - Abstract: For the first time, Cu nanoparticles were evenly decorated on MoS{sub 2} nanosheet by chemical reduction. The as-prepared Cu-MoS{sub 2} hybrid was characterized by atomic force microscope (AFM), Raman spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD) and then used to fabricate a non-enzymatic glucose sensor. The performance of our sensor was investigated by cyclic voltammetry and amperometric measurement in alkaline media. Electrochemical tests showed that Cu-MoS{sub 2} hybrid exhibited synergistic electrocatalytic activity on the oxidation of glucose with a high sensitivity of 1055 μA mM{sup −1} cm{sup −2} and a linear range up to 4 mM.

36 MATERIALS SCIENCE↗

Non-enzymatic hydrogen peroxide biosensor based on rose-shaped FeMoO{sub 4} nanostructures produced by convenient microwave-hydrothermal method

Graphical abstract: A non-enzymatic H{sub 2}O{sub 2} sensor with high selectivity and sensitivity based on rose-shaped FeMoO{sub 4} synthesized by the convenient microwave-assisted hydrothermal method, was fabricated. - Highlights: • Rose-shaped FeMoO{sub 4} is synthesized within 10 min via microwave-assisted hydrothermal approach. • Non-enzymatic hydrogen peroxide biosensor based on FeMoO{sub 4} nanomaterials is fabricated. • The biosensor exhibits good performance. - Abstract: In this work, we demonstrated a simple, rapid and reliable microwave-assisted hydrothermal approach to synthesize the uniform rose-shaped FeMoO{sub 4} within 10 min. The morphologies of the synthesized materials were characterized by X-ray powder diffraction and scanning electron microscopy. Moreover, a non-enzymatic amperometric sensor for the detection of hydrogen peroxide (H{sub 2}O{sub 2}) was fabricated on the basis of the FeMoO{sub 4} as electrocatalysis. The resulting FeMoO{sub 4} exhibited high sensitivity and good stability for the detection of H{sub 2}O{sub 2}, which may be attributed to the rose-shaped structure of the material and the catalytic property of FeMoO{sub 4}. Amperometric response showed that the modified electrode had a good response for H{sub 2}O{sub 2} with a linear range from 1 μM to 1.6 mM, a detection limit of 0.5 μM (S/N = 3), high selectivity and short response time. Additionally, good recoveries of analytes in real milk samples confirm the reliability of the prepared sensor in practical applications.

36 MATERIALS SCIENCE↗

Efficient electrocatalytic performance of thermally exfoliated reduced graphene oxide-Pt hybrid

Highlights: • Synthesis of Pt–RGO nanohybrids of very high electrochemically active surface area. • Electrocatalytic activity-cum-stability: ∼10 times that of commercial Pt-C catalyst. • TEM confirms narrow size distribution and excellent dispersion of Pt nanoparticles. • SAED and XRD indicate (1 1 1) orientation of Pt nanoparticles. • Methanol oxidation EIS reveal decrease in charge transfer resistance with potential - Abstract: High quality thermally exfoliated reduced graphene oxide (RGO) nanosheets decorated with platinum nanocrystals have been synthesized using a simple environmentally benign process. The electrocatalytic behaviour of the Pt–RGO nanohybrid for methanol oxidation was studied using cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy. High resolution transmission electron microscopy shows uniform dispersion of Pt nanoparticles of ∼2–4 nm size. X-ray diffraction and selected area diffraction studies reveal (1 1 1) orientation of the platinum nanoparticles. The cyclic voltammetry and chronoamperometry results indicate higher catalytic activity and stability for Pt–RGO compared to commercial Pt-C. The electrochemical active surface area of Pt–RGO (52.16 m{sup 2}/g) is found to be 1.5 times that of commercial Pt-C. Impedance spectroscopy shows different impedance behaviour at different potential regions, indicating change in methanol oxidation reaction mechanism with potential. The reversal of impedance pattern to the second quadrant, at potentials higher than ∼0.40 V, indicates change in the rate determining reaction.

36 MATERIALS SCIENCE↗

Amperometric sensing of hydrogen peroxide using glassy carbon electrode modified with copper nanoparticles

In this paper, fabrication of glassy carbon electrode (GCE) modified with nano copper particles is discussed. The modified electrode has been tested for the non-enzymatic electrochemical detection of hydrogen peroxide (H{sub 2}O{sub 2}). The copper nanoparticles (Cu NPs) were prepared employing a simple chemical reduction method. The presence of Cu NPs was confirmed through UV–visible (UV–vis) absorption spectroscopy and X-ray diffraction (XRD) analysis. The size and morphology of the particles were investigated using transmission electron microscopy (TEM). The electrochemical properties of the fabricated sensor were studied via cyclic voltammetry (CV), chronoamperometry and electrochemical impedance spectroscopy (EIS). The electrochemical sensor displayed excellent performance features towards H{sub 2}O{sub 2} detection exhibiting wide linear range, low detection limit, swift response time, good reproducibility and stability.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A novel rapid synthesis of Fe{sub 2}O{sub 3}/graphene nanocomposite using ferrate(VI) and its application as a new kind of nanocomposite modified electrode as electrochemical sensor

Highlights: • A novel rapid synthesis of rGO–Fe{sub 2}O{sub 3} nanocomposite was developed using Fe(VI). • Fe(VI) as an environmentally friendly oxidant was introduced for GO synthesis. • Synthesized rGO–Fe{sub 2}O{sub 3} nanocomposite was applied as electrochemical sensor. • A non-enzymatic sensor was developed for H{sub 2}O{sub 2}. - Abstract: In this study, a novel, simple and sensitive non-enzymatic hydrogen peroxide electrochemical sensor was developed using reduced graphene oxide/Fe{sub 2}O{sub 3} nanocomposite modified glassy carbon electrode. This nanocomposite was synthesized by reaction of sodium ferrate with graphene in alkaline media. This reaction completed in 5 min and the products were stable and its deposition on the surface of electrode is investigated. It has been found the apparent charge transfer rate constant (ks) is 0.52 and transfer coefficient (α) is 0.61 for electron transfer between the modifier and glassy carbon electrode. Electrochemical behavior of this electrode and its ability to catalyze the electro-reduction of H{sub 2}O{sub 2} has been studied by cyclic voltammetry and chronoamperometry at different experimental conditions. The analytical parameters showed the good ability of electrode as a sensor for H{sub 2}O{sub 2} amperometric reduction.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of Pt/rGO catalysts with two different reducing agents and their methanol electrooxidation activity

Highlights: • Pt/rGO catalysts were successfully synthesized using either NaBH{sub 4} or ethylene glycol. • Synthesis using NaBH{sub 4} could improve electrocatalytic towards methanol oxidation of Pt/rGO catalyst. • 40%Pt/rGO synthesized using NaBH{sub 4} showed the best electrocatalytic performance. - Abstract: The synthesis processes of Platinum (Pt) on reduced graphene oxide (rGO) catalysts from graphene oxide (GO) using two reducing agents including sodium borohydride and ethylene glycol is reported. Structure and morphology of Pt/rGO catalysts are characterized by X-ray powder diffraction, transmission electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy. Electrocatalytic methanol oxidation properties of these catalysts are evaluated by cyclic voltammetry and chronoamperometry. The results show that catalyst synthesized using sodium borohydride has a higher metallic Pt content and an improved catalytic performance in comparison to catalyst synthesized using ethylene glycol. Moreover, effect of Pt loading amount on electrocatalytic methanol oxidation performance of catalysts synthesized using sodium borohydride is systematically investigated. The optimal Pt loading amount on graphene is determined to be 40%.

36 MATERIALS SCIENCE↗

Ultrasensitive and selective non-enzymatic electrochemical glucose sensor based on hybrid material of graphene nanosheets/graphene nanoribbons/nickel nanoparticle

Highlights: • Nickel nanoparticles incorporated graphene nanosheets/graphene nanoribbons (GS/GNR/Ni) composite was synthesized by in-situ chemical reduction route and the as prepared GS/GNR/Ni modified glassy carbon electrode (GCE) was applied to detect glucose. • The fabricated GS/GNR/Ni/GCE modified electrode exhibits outstanding performance for non-enzymatic glucose sensing with sensitivity (2.3 mA/mM cm{sup 2}), linear range (5 nM - 5 mM) and detection limit (2.5 nM). • GS/GNR/Ni/GCE modified electrode exhibited a high selectivity towards glucose against the interferents, such as ascorbic acid (AA), uric acid (UA), dopamine and sucrose. - Abstract: A fast, highly sensitive and selective non-enzymatic electrochemical glucose sensor based on graphene sheet/graphene nanoribbon/nickel nanoparticles (GS/GNR/Ni) hybrid material modified electrode was fabricated. The hybrid material was synthesized via facile in-situ chemical reduction and characterized by X-ray diffraction, transmission electron microscopy, Raman spectroscopy, cyclic voltammetry and electrochemical impedance spectroscopy. The GS/GNR/Ni/GCE showed high electrochemical activity towards the oxidation of glucose in a 0.1 M NaOH solution. At an applied potential of +0.5 V, it displayed wide linear amperometric response towards glucose from the range of 5 nM–5 mM, with a detection limit of 2.5 nM and sensitivity of 2.3 mA/mM cm{sup 2}. Moreover, the modified electrode was relatively insensitive to commonly interfering species such as dopamine, ascorbic acid, sucrose, uric acid and Cl{sup −} ions. The fabricated sensor with better reproducibility, good long term stability, makes it a promising electrode for the development of effective glucose sensor.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and electrochemical properties of silver dendrites and silver dendrites/rGO composite for applications in paracetamol sensing

Highlights: • Synthesis of Ag dendrites and GO/Ag dendrites composites by Galvanic Replacement method. • Ag dendrites are wrapped over graphene sheets. • High sensitivity (10.046 μA cm{sup −2} mM{sup -1)} and lower limit of detection of 0.025 μM for sensing of Paracetamol. - Abstract: Electrochemical sensors are one of the important applications of electrochemistry. In this paper, synthesis, characterization and application of Silver Dendrites and Silver Dendrites/rGO sensors for simple and fast determination of Paracetamol are described. Silver dendrites and their composite with graphene oxide were synthesized by galvanic replacement method. The synthesized samples were characterized by XRD, SEM and TEM. XRD reveals the FCC structure of silver and TEM images show the formation of dendritic silver wrapped in the graphene sheets. The Electrochemical paracetamol sensing properties of these samples were tested using cyclic voltammetry and chronoamperometry. The silver dendrites exhibit a sensitivity of 2.807 × 10{sup 5}μA/mM/g and a lower detection limit of 2.5 μM, whereas, the composite with graphene oxide exhibits a high sensitivity of 2.511 × 10{sup 6}μA /mM/g with a lower detection limit of 0.025 μM.

36 MATERIALS SCIENCE↗

Waterborne carbon nanotube ink for the preparation of electrodes with applications in electrocatalysis and enzymatic biosensing

Highlights: • A water-based carbon nanotube ink was prepared and applied by rod coating as a single layer onto a flexible substrate. • The printed layer was conductive, flexible and showed electrocatalytic behavior. • The printed layer could be used as an enzymatic biosensor. • The effect of oxygen plasma on electrical and electrochemical properties was studied. • The fabrication of electrodes is fast and can be upscaled. - Abstract: Conductive inks with optimal properties for amperometric sensor fabrication are key materials for low cost and high performance electrodes printed on flexible substrates. In this work, electrodes made with a carbon nanotube (CNT) waterborne ink were prepared and characterized. The electrodes showed mechanical stability and electrocatalytic behavior. Moreover, they were used for the immobilization of horseradish peroxidase (HRP) and their performance as enzymatic biosensors was assessed. Oxygen plasma treatment was used to generate carboxylic functionalities for enzyme immobilization. Its effect on the electrodes was investigated in order to optimize their performance. These electrodes were fabricated with an ink that provides a potentially simple route for roll-to-roll biosensor printing.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Brain-implantable multifunctional probe for simultaneous detection of glutamate and GABA neurotransmitters

We report Glutamate (GLU) and gamma-aminobutyric acid (GABA) are neurotransmitters (NTs) with an essential role in signal transmission in the brain. Brain disorders, such as epilepsy, Alzheimer's and Parkinson's diseases, and traumatic brain injury can be linked to imbalances in the GLU-GABA homeostasis that occurs in sub-second to seconds time frames. Current measurement techniques can detect these two NT concentrations simultaneously only in vitro. The present work reports on the fabrication of a silicon multifunctional biosensor microarray probe for sub-second simultaneous GLU-GABA detection in real-time, with excellent analyte sensitivity and selectivity and in vivo capabilities. The novel Si probes feature four surface-functionalized platinum ultramicroelectrodes (UMEs) for simultaneous amperometric detection of GLU and GABA with a sentinel, and a built-in microfluidic channel for the introduction of neurochemicals in the proximity of the UMEs. The microchannel also allows functioning of an On-Demand In-situ Calibrator that runs in-situ biosensor calibration. The probe exhibited excellent robustness at insertion in agarose-gel brain-tissue-mimicking test, and remarkably high hydrogen peroxide sensitivity (a by-product of GLU-GABA enzyme biosensor) with values on the order of 5000 nA μM -1 cm -2 and maximum sensitivities of 204 ± 15 nA μM -1 cm -2 and 37 ± 7 nA μM -1 cm -2 for GLU and GABA, respectively. Furthermore, the limit of detection of the biosensors reached as low as 7 nM, 165 nM and 750 nM for H 2 O 2 , GLU and GABA, respectively and a temporal resolution of hundreds of milliseconds during in vivo studies using freely moving rats.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nickel recovery from electronic waste II Electrodeposition of Ni and Ni–Fe alloys from diluted sulfate solutions

Highlights: • Ni can be recovered from EG wastes as pure Ni or as Ni–Fe alloys. • The control of the experimental conditions gives a certain alloy composition. • Unusual deposits morphology shows different nucleation mechanisms for Ni vs Fe. • The nucleation mechanism was progressive for Ni and instantaneous for Fe and Ni–Fe. - Abstract: This study focuses on the electrodeposition of Ni and Ni–Fe alloys from synthetic solutions similar to those obtained by the dissolution of electron gun (an electrical component of cathode ray tubes) waste. The influence of various parameters (pH, electrolyte composition, Ni{sup 2+}/Fe{sup 2+} ratio, current density) on the electrodeposition process was investigated. Scanning electron microscopy (SEM) and X-ray fluorescence analysis (XRFA) were used to provide information about the obtained deposits’ thickness, morphology, and elemental composition. By controlling the experimental parameters, the composition of the Ni–Fe alloys can be tailored towards specific applications. Complementarily, the differences in the nucleation mechanisms for Ni, Fe and Ni–Fe deposition from sulfate solutions have been evaluated and discussed using cyclic voltammetry and potential step chronoamperometry. The obtained results suggest a progressive nucleation mechanism for Ni, while for Fe and Ni–Fe, the obtained data points are best fitted to an instantaneous nucleation model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced Field Emission From The Gold- Polyaniline (Au-PANI) Nanocomposite

The gold-polyaniline nanocomposite was synthesized by electrochemical route in two steps. In the first step polyaniline film was deposited by cyclic voltammetry on the ITO coated glass substrate, and then synthesis of gold-polyaniline nanocomposite via chronoamperometry. The synthesized gold-polyaniline nanocomposite film was characterized using scanning electron microscope (SEM), X-ray diffraction (XRD), Ultra-violet spectroscopy (UV-vis) and Fourier Transform Infrared Spectrometry (FTIR). The SEM analysis shows well adherent gold nanoparticles on the surface of polyaniline nanofibers. The XRD and UV-Vis spectra indicate formation of gold nanoparticles. From the field emission studies, the value of the turn on field, corresponding to 1 nA emission current, is found to be 0.65 V/{mu}m and emission current density of 1 {mu}A/cm{sup 2} has been drawn at an applied field of 1.1 V/{mu}m. These values are observed to be superior than the reported ones. The field emission current stability investigated at 1 {mu}A over duration of more than four hours is found to be good. The observed field emission characteristics suggest the gold polyaniline nanocomposite as promising material for field emission based applications.

36 MATERIALS SCIENCE↗

Direct laser immobilization of photosynthetic material on screen printed electrodes for amperometric biosensor

This letter demonstrates the direct laser printing of photosynthetic material onto low cost nonfunctionalized screen printed electrodes for the fabrication of photosynthesis-based amperometric biosensors. The high kinetic energy of the transferred material induces direct immobilization of the thylakoids onto the electrodes without the use of linkers. This type of immobilization is able to establish efficient electrochemical contact between proteins and electrode, stabilizing the photosynthetic biomolecule and transporting electrons to the solid state device with high efficiency. The functionality of the laser printed biosensors was evaluated by the detection of a common herbicide such as Linuron.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A hydrogen peroxide electrochemical sensor based on silver nanoparticles decorated three-dimensional graphene

A facile strategy has been developed to synthesize sliver nanoparticles (Ag NPs) decorated three-dimensional graphene (3DG) through hydrothermal process. The AgNPs-3DG composites are directly fabricated into a free standing sensing electrode for electrochemical detection of hydrogen peroxide (H{sub 2}O{sub 2}) in phosphate buffered solutions. Various techniques equipments including scanning electron microscopy, X-ray diffraction, and Raman spectroscopy are used to characterize the morphology and structure of the as-prepared composite. The electrochemical experiments reveal the AgNPs-3DG based biosensor exhibits fast amperometric sensing, low detection limitation, wide linear responding range, and perfect selectivity for non-enzyme H{sub 2}O{sub 2} detection, indicating the well synergistic effect of Ag NPs high electrocatalytic activity and 3DG high conductivity and large surface area.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

3D dendritic α-Fe{sub 2}O{sub 3} nano-architectures: Synthesis and its application on electrochemical non-enzymatic H{sub 2}O{sub 2} sensing

In this manuscript we have successfully synthesized a large scale 3D dendritic α-Fe{sub 2}O{sub 3} hierarchical structure via a hydrothermal reaction. The crystallinity, composition, purity, morphology of the synthesized α-Fe{sub 2}O{sub 3} are characterized by powder X-ray diffraction (PXRD), field emission scanning electron microscopic (FESEM), energy dispersive X-ray spectroscopic (EDS). FESEM image reveals that the individual α-Fe{sub 2}O{sub 3} dendrite consists of a long central trunk with secondary and tertiary branches. For electrochemical H{sub 2}O{sub 2} sensing we have carried out cyclic voltammetry (CV), amperometric i-t measurement. It has been found that the current density vs. H{sub 2}O{sub 2} concentration calibration curve is linear in nature. The present study reveals that the dendritic α-Fe{sub 2}O{sub 3} hierarchical structure exhibits very sensitive electrochemical sensing capability towards H{sub 2}O{sub 2} reduction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrazine sensing properties of microwave synthesized graphene/ZnO composites

This paper reports the synthesis of graphene/ ZnO nanocomposite using microwave method and its application in sensing of hydrazine. The morphological characteristics of the samples are studied using Scanning Electron Microscope (SEM). The formation of the composite is further confirmed by the X-ray Diffraction (XRD). Energy Dispersive X-ray Analysis (EDAX) shows the presence of carbon indicating the presence of graphene. The hydrazine sensing property of the electrode is studied using cyclic voltammometry (CV) and Chronoamperometry (CA) studeis.

77 NANOSCIENCE AND NANOTECHNOLOGY↗