Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AMMONOLYSIS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Synthesis, surface chemistry and pseudocapacitance mechanisms of VN nanocrystals derived by a simple two-step halide approach

Chloroamide precursors generated via a simple two-step ammonolysis reaction of transition metal chloride in the liquid phase at room temperature were heat treated in ammonia at moderate temperature to yield nano-sized VN crystallites. Grain growth inhibited by lowering the synthesis temperature (≈400°C) yielded agglomerated powders of spherical crystallites of cubic phase of VN with particle sizes as small as 6nm in diameter. X-ray diffraction, FTIR, mass spectroscopy (MS), and nuclear magnetic resonance (NMR) spectroscopy assessed the ammonolysis and nitridation reaction of the VCl 4 -NH 3 system. X-ray Rietveld refinement, the BET technique and high-resolution transmission microscopy (HRTEM), energy dispersive x-ray (EDX) and thermogravimetric analysis (TGA) helped assess the crystallographic and microstructural nature of the VN nanocrystals. The surface chemistry and redox reaction leading to the gravimetric pseudo-capacitance value of (≈855 F/g) measured for the VN nanocrystals was determined and validated using FTIR, XPS and cyclic voltammetry analyses.

Choi, Daiwon (ORCID:000000024779742X)↗
NASA NTRS1972

Gallium nitride optoelectronic devices

The growth of bulk gallium nitride crystals was achieved by the ammonolysis of gallium monochloride. Gallium nitride single crystals up to 2.5 x 0.5 cm in size were produced. The crystals are suitable as substrates for the epitaxial growth of gallium nitride. The epitaxial growth of gallium nitride on sapphire substrates with main faces of (0001) and (1T02) orientations was achieved by the ammonolysis of gallium monochloride in a gas flow system. The grown layers had electron concentrations in the range of 1 to 3 x 10 to the 19th power/cu cm and Hall mobilities in the range of 50 to 100 sq cm/v/sec at room temperature.

Chu, T. L.↗
NASA NTRS1990

Studies on the use of supercritical ammonia for ceramic nitride synthesis and fabrication

The extractability of ammonia halides (including ammonium thiocyanate) formed as byproducts from the synthesis of Si(NH)2 via ammonolysis of the corresponding silicon tetrahalides using supercritical NH3 as the extraction medium was investigated. It was found that the NH4SCN byproduct of ammonolysis of Si(SCN)4 can be almost completely extracted from the insoluble Si(NH)2 forming a promising system for the synthesis of pure Si(NH)2, one of the best precursors for Si3N4. In addition it was found that Si3N4, AlN, BN, and Si(NH)2 are insoluble in SC ammonia. Also discussed are design considerations for a supercritical ammonia extraction unit.

Cornell, Linda↗
DOE OSTI2011

Rare earth-activated aluminum nitride powders and method of making

Rare earth-activated aluminum nitride powders are made using a solution-based approach to form a mixed hydroxide of aluminum and a rare earth metal, the mixed hydroxide is then converted into an ammonium metal fluoride, preferably a rare earth-substituted ammonium aluminum hexafluoride ((NH4)3Al1-xRExF6), and finally the rare earth-activated aluminum nitride is formed by ammonolysis of the ammonium metal fluoride at a high temperature. The use of a fluoride precursor in this process avoids sources of oxygen during the final ammonolysis step which is a major source of defects in the powder synthesis of nitrides. Also, because the aluminum nitride is formed from a mixed hydroxide co-precipitate, the distribution of the dopants in the powder is substantially homogeneous in each particle.

Han, Bing↗
DOE OSTI2019

N, N’-disubstitutedphenyl-4-ethoxyl benzene-1, 3-disulfonamides: design, synthesis, and evaluation of anti-platelet aggregation activity

According to the bio-isosterism theory, a series of N, N’-disubstitutedphenyl-4-ethoxylbenzene-1, 3-disulfonamides (5a-p) were designed and synthesized by two steps of reactions including chlorosulfonation and ammonolysis. The structures of all compounds have been confirmed by IR, {sup 1}H-NMR, {sup 13}C-NMR, and ESI-MS spectra. The in vitro anti-platelet aggregation activities were evaluated by Born’s test induced by adenosine diphosphate (ADP) and arachidonic acid (AA), respectively. The biological evaluation results revealed that compound 5h had the lowest IC{sub 50} value (0.32 μM) and the highest inhibition rate (40.9 %) that of three positive control agents clopidogrel (0.41 μM, 23.5 %), aspirin (0.53 μM, 28.9 %), and picotamide (0.76 μM, 32.7 %). Afterwards, compounds with higher activities were selected to further study in vitro cytotoxicity via cell counting kit-8 (CCK-8) assay. The cytotoxicity results indicated that compound 5h had simultaneously the lowest cytotoxicity, while other compounds had no significant relationship between the anti-platelet activities and cytotoxicities. Based on above in vitro anti-platelet activity data, the SAR (Structure Activity Relationship) of the target compounds was preliminarily summarized. In general, N, N’-disubstitutedphenyl-4-ethoxylbenzene-1, 3-disulfonamides have the potential of further study and very likely become safer and more effective anti-platelet agents.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2010

Bixbyite- and anatase-type phases in the system Sc-Ta-O-N

The aim of our study was to modify the basis compound ss-TaON, which crystallizes in the monoclinic baddeleyite-type, by incorporation of appropriate dopant ions, in order to obtain anion-deficient cubic fluorite-type phases, which are of interest as solids with mobile nitrogen ions. For this purpose, scandium-doped tantalum oxide nitrides were prepared by ammonolysis of amorphous oxide precursors. An unexpected variety of phases with different structural features was observed: bixbyite-type phases of general composition Sc{sub x}Ta{sub 1-x}(O,N){sub y} with 0.33{<=}x{<=}1 and 1.7{<=}y{<=}1.9, yellow colored metastable anatase-type phases such as Sc{sub 0.1}Ta{sub 0.9}O{sub 1.2}N{sub 0.8} or Sc{sub 0.15}Ta{sub 0.85}O{sub 1.3}N{sub 0.7} and, additionally, anosovite-type phases Sc{sub x}Ta{sub 3-x}O{sub 2x}N{sub 5-2x} with 0{<=}x{<=}1.05. Selected phases were investigated by UV/vis spectroscopy. Anatase- and anosovite-type compounds show brilliant colors. In the anatase-type phase, a possible anion ordering was examined by theoretical methods. Additionally, energy calculations on phase stability were performed for Sc{sub x}Ta{sub 1-x}O{sub 1+2x}N{sub 1-2x} in the baddeleyite, rutile, and anatase structure types with varying amounts of dopants. - Graphical abstract: New anatase- and bixbyite-type phases obtained as single-phase samples in the system Sc-Ta-O-N.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Mesoporous VN prepared by solid-solid phase separation

We recently reported a simple route to prepare mesoporous, conducting nitrides from Zn containing ternary transition metal oxides. Those materials result from the condensation of atomic scale voids created by the loss of Zn by evaporation, the replacement of 3 oxygen anions by 2 nitrogen anions, and in most cases the loss of oxygen to form water on the reduction of the transition metal. In this report, we present a different route to prepare mesoporous VN from K containing vanadium oxides. In this case, ammonolysis results in a multiphase solid product that contains VN, and other water soluble compounds such as KOH or KNH{sub 2}. On removing the K containing products by washing with degassed water, only mesoporous VN remains. VN materials with different pore sizes (10 nm-20 nm) were synthesized at 600 Degree-Sign C by varying the reaction time, while larger pores are obtained at higher temperatures (50 nm at 800 Degree-Sign C). - Graphical Abstract: The synthesis process of mesoporous VN from solid-solid separation. Highlights: Black-Right-Pointing-Pointer Mesoporous VN has been prepared by solid-solid phase separation. Black-Right-Pointing-Pointer Mesoporous VN was characterized by Rietveld refinement of PXRD, SEM and nitrogen physisorption. Black-Right-Pointing-Pointer VN materials with different pore sizes (10 nm-50 nm) were synthesized.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Magnetic core/shell-type composites composed of coarse FePt particles coated with finely powdered iron nitride

Highlights: • Magnetic core/shell-type composites were prepared on α″-Fe{sub 16}N{sub 2}-like compound with FePt core. • α″-Fe{sub 16}N{sub 2}-like compound grew epitaxially on the FePt core. • Magnetic coupling increased the magnetic coercivity of α″-Fe{sub 16}N{sub 2}-like compound. - Abstract: Although α″-Fe{sub 16}N{sub 2}-like compounds exhibit enhanced magnetization compared to α-Fe, it is important to increase their magnetic coercivity to obtain new hard magnetic materials for electric vehicle application. In the present work, coarse FePt particles were coated with finely powdered Fe{sub 3}O{sub 4} produced by the hydrolysis of Fe(acac){sub 3} in benzyl alcohol. This Fe{sub 3}O{sub 4} coating layer was subsequently reduced under hydrogen and then nitrided by ammonolysis at 150 °C to obtain a dual-phase mixture of an α″-Fe{sub 16}N{sub 2}-like compound (referred to herein as “α″-Fe{sub 16}N{sub 2}”) and residual α-Fe. The (“α″-Fe{sub 16}N{sub 2}” + α-Fe){sub 1-x}/(FePt){sub x} composite particles for which x = 0.2, 0.4 or 0.6 generated smooth magnetization hysteresis curves, and the magnetic coercivity of these materials increased with increases in the proportion of FePt. Magnetic coupling was clearly evident between the core and shell regions in the composite powder for which x = 0.6, as demonstrated by a plot of the Wohlfarth interaction against the magnetic field. Transmission electron microscopy images confirmed magnetic coupling between the coarse FePt particles (several hundred nm in diameter) and the coating of fine mixed particles (several tens of nm in diameter) of “α″-Fe{sub 16}N{sub 2}” and α-Fe. The “α″-Fe{sub 16}N{sub 2}” crystals forming the particle shell were found to grow epitaxially, aligning their c-axes parallel to that of the tetragonal FePt.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

The impact of carbon coating on the synthesis and properties of α"–Fe 16 N 2 powders

This study presents the preparation of carbon composite Fe 16 N 2 powders, and the influence of a protective carbon coating on the yield and magnetic properties of Fe 16 N 2 . Nanoparticle precursors with and without carbon were reacted under ammonia gas flow to produce Fe 16 N 2 . X-ray diffraction indicates that the powders contain typically 50-60% Fe 16 N 2 , with the remaining phases being unreacted iron, Fe 4 N or Fe 3 N. Transmission electron microscopy demonstrates that the carbon coating is effective atnd reducing the level of sintering of Fe nanoparticles during the reduction stage prior to ammonolysis to form Fe nanoparticles. In situ TEM was used to observe loss of ordering in the nitrogen sublattice of carbon composite Fe 16 N 2 powders in the range of 168 °C to 200 °C. Magnetic susceptibility measurements show maximum values for saturation magnetization in the range of 232 emu/g -1 , and for coercivity near 930 Oe, for samples measured up to 2T applied field at 300K.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Composition-induced structural, electrical, and magnetic phase transitions in AX-type mixed-valence cobalt oxynitride epitaxial thin films

Synthesis of mid- to late-transition metal oxynitrides is generally difficult by conventional thermal ammonolysis because of thermal instability. In this letter, we synthesized epitaxial thin films of AX-type phase-pure cobalt oxynitrides (CoO{sub x}N{sub y}) by using nitrogen-plasma-assisted pulsed laser deposition and investigated their structural, electrical, and magnetic properties. The CoO{sub x}N{sub y} thin films with 0 ≤ y/(x + y) ≤ 0.63 grown on MgO (100) substrates showed a structural phase transition from rock salt (RS) to zinc blend at the nitrogen content y/(x + y) ∼ 0.5. As the nitrogen content increased, the room-temperature electrical resistivity of the CoO{sub x}N{sub y} thin films monotonically decreased from the order of 10{sup 5} Ω cm to 10{sup −4} Ω cm. Furthermore, we observed an insulator-to-metal transition at y/(x + y) ∼ 0.34 in the RS-CoO{sub x}N{sub y} phase, which has not yet been reported in Co{sup 2+}/Co{sup 3+} mixed-valence cobalt oxides with octahedral coordination. The low resistivity in the RS-CoO{sub x}N{sub y} phase, on the 10{sup −3} Ω cm order, may have originated from the intermediate spin state of Co{sup 3+} stabilized by the lowered crystal field symmetry of the CoO{sub 6−n}N{sub n} octahedra (n = 1, 2,…5). Magnetization measurements suggested that a magnetic phase transition occurred in the RS-CoO{sub x}N{sub y} films during the insulator-to-metal transition. These results demonstrate that low-temperature epitaxial growth is a promising approach for exploring novel electronic functionalities in oxynitrides.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Transformation of 2D group-III selenides to ultra-thin nitrides: enabling epitaxy on amorphous substrates

Here, the experimental realization of two-dimensional (2D) gallium nitride (GaN) has enabled the exploration of 2D nitride materials beyond boron nitride. Here we demonstrate one possible pathway to realizing ultra-thin nitride layers through a two-step process involving the synthesis of naturally layered, group-III chalcogenides (GIIIC) and subsequent annealing in ammonia (ammonolysis) that leads to an atomic-exchange of the chalcogen and nitrogen species in the 2D-GIIICs. The effect of nitridation differs for gallium and indium selenide, where gallium selenide undergoes structural changes and eventual formation of ultra-thin GaN, while indium selenide layers are primarily etched rather than transformed by nitridation. Further investigation of the resulting GaN films indicates that ultra-thin GaN layers grown on silicon dioxide act as effective 'seed layers' for the growth of 3D GaN on amorphous substrates.

2D materials↗
DOE OSTI2017

Synthesis and electrochemical characterization of Ti{sub x}Ta{sub y}Al{sub z}N{sub 1-δ}O{sub γ} for fuel cell catalyst supports

Quinary Ti{sub x}Ta{sub y}Al{sub z}N{sub 1-δ}O{sub γ} of various compositions have been prepared by a co-precipitation method followed by ammonolysis. The nitride samples were examined as potential catalyst supports in polymer electrolyte membrane fuel cells. The nitride products crystallized in the rock salt (NaCl) structure over a wide range of compositions. The addition of Ta and Al was highly beneficial towards improving the chemical and electrochemical stability of TiN, without a significant loss of electrical conductivity. Platinum particles were successfully deposited on the (oxy)nitride samples, and the composite samples at some compositions were found to be comparable to Pt/carbon in their stability and catalytic activity even without optimizing the Pt deposition and dispersion processes. - Graphical abstract: The effect of additions of Ta and Al into TiN structure. Shifts the lattice constant, and increases its chemical stability in acidic environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Ammonia pretreatment of corn stover enables facile lignin extraction

Thermochemical pretreatment of lignocellulose is often employed to render polysaccharides more digestible by carbohydrate-active enzymes to maximize sugar yields. The fate of lignin during pretreatment, however, is highly dependent on the chemistry employed and must be considered in cases where lignin valorization is targeted alongside sugar conversion—an important feature of future biorefinery development. Here, a two-step process is demonstrated in which anhydrous ammonia (AA) pretreatment is followed by mild NaOH extraction on corn stover to solubilize and fractionate lignin. As known, AA pretreatment simultaneously alters the structure of cellulose with enhanced digestibility while redistributing lignin. The AA-pretreated residue is then extracted with dilute NaOH at mild conditions to maximize lignin separation, resulting in a digestible carbohydrate-rich solid fraction and a solubilized lignin stream. Lignin removal of more than 65% with over 84% carbohydrate retention is achieved after mild NaOH extraction of AA-pretreated corn stover with 0.1 M NaOH at 25 °C. Two-dimensional nuclear magnetic resonance (2D-NMR) spectroscopy of the AA-pretreated residue shows that ammonolysis of ester bonds occurs to partially liberate hydroxycinnamic acids, and the AA-pretreated/NaOH-extracted residue exhibits a global reduction of all lignin moieties caused by reduced lignin content. A significant reduction (~70%) in the weight-average molecular weight ( M w ) of extracted lignin is also achieved. Imaging of AA-pretreated/NaOH extracted residues show extensive delamination and disappearance of coalesced lignin globules from within the secondary cell walls. Glycome profiling analyses demonstrates ultrastructural level cell wall modifications induced by AA pretreatment and NaOH extraction, resulting in enhanced extractability of hemicellulosic glycans, indicating enhanced polysaccharide accessibility. The glucose and xylose yields from enzymatic hydrolysis of AA-pretreated/NaOH-extracted corn stover were higher by ~80% and ~60%, respectively, compared to untreated corn stover at 1% solids loadings. For digestions at 20% solids, a benefit of NaOH extraction is realized in achieving ~150 g/L of total monomeric sugars (glucose, xylose, and arabinose) in the enzymatic hydrolysates from AA-pretreated/NaOH-extracted corn stover. Altogether, this process enables facile lignin extraction in tandem with a leading thermochemical pretreatment approach, demonstrating excellent retention of highly digestible polysaccharides in the solid phase and a highly depolymerized, soluble lignin-rich stream.

09 BIOMASS FUELS↗
DOE OSTI2026

Aliovalent gallium dopants remove Ti 3+ defects and improve photocatalytic and photoelectrochemical water oxidation properties of LaTiO 2 N

LaTiO 2 N is a promising semiconductor for the water splitting reaction due to its 2.1 eV band gap and stability against corrosion. However, its solar energy conversion is limited by Ti 3+ recombination defects introduced during ammonolysis. Here we show for the first time that Ti 3+ defects in LaTiO 2 N can be suppressed with incorporation of 2, 5, and 10% aliovalent gallium (Ga 3+ ) dopants during synthesis via the layered La 2 Ti 2 O 7 intermediate. Electron paramagnetic resonance (EPR) spectroscopy on the solid powders confirms a reduction in the Ti 3+ donor density from 2.97 × 10 17 cm −3 for the non-doped material to ∼6.24 × 10 16 cm −3 for 5% Ga-doped LaTiO 2 N. The remaining Ti 3+ defects are concentrated near the LaTiO 2 N surface, according to X-ray photoelectron spectroscopy. The defect reduction shifts the optical absorption edge from 2.02 to 2.09 eV and eliminates a broad absorption band at 1050 nm from the optical absorption spectra. It also removes a 1.0–1.7 eV sub-band gap photovoltage signal from surface photovoltage spectra. This suggests that empty Ti 3+ d-orbitals are located 1.0–1.7 eV above the LaTiO 2 N valence band edge. Removing these recombination states with increasing Ga 3+ content enhances the photoconversion efficiency of LaTiO 2 N during water oxidation. The optimized 2 wt% CoO x -loaded 5% Ga-doped LaTi O2 N material has a 16% AQE (400 nm) for O 2 production from aqueous silver nitrate solution and a ∼2.1 mA cm −2 water oxidation photocurrent at 1.23 V under 100 mW cm −2 Xe arc lamp illumination. The water oxidation photocurrent is stable during a 50 min test, and the Faraday efficiency for O 2 generation is 97%, confirming short-term corrosion stability of LaTiO 2 N. Altogether, these results provide a better understanding of the distribution, concentration, and impact of Ti 3+ defects on the optical, photovoltage, and photoelectrochemical properties of LaTiO 2 N. In combination with other defect control strategies, aliovalent Ga 3+ doping can help bring the solar energy conversion efficiency of LaTiO 2 N closer to the theoretical limit.

Wang, Li [University of California, Davis, CA (Uni↗
DOE OSTI2021

Defect-engineered room-temperature ferromagnetism in quasi-two-dimensional nitrided CoTa 2 O 6

Thermal ammonolysis of quasi-two-dimensional (quasi-2D) CoTa 2 O 6 yields the O 2– /N 3– and anionic vacancy-ordered Co 2+ $Ta^{5+}_{2}$O 6–x N 2x/3 $\square$ x/3 (x $\leqslant$ 0.15), which exhibits a transition from antiferromagnetism to defect-engineered above-room-temperature ferromagnetism. First-principles calculations reveal that the origin of ferromagnetism is a particular CoO 5 N configuration with N located at Wyckoff position 8j, which breaks mirror symmetry about the ab plane. A pressure-induced electronic phase transition is also predicted at ~24.5 GPa, accompanied by insulator-to-metal transition and magnetic moment vanishing.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Structure-mechanical properties correlation in bulk LiPON glass produced by nitridation of metaphosphate melts

The glassy solid electrolyte Lithium phosphorous oxynitride (LiPON) has been widely researched in thin film solid state battery format due to its outstanding stability when cycled against lithium. In addition, recent reports show thin film LiPON having interesting mechanical behaviors, especially its ability to resist micro-scale cracking via densification and shear flow. Here, in the present study, we have produced bulk LiPON glasses with varying nitrogen contents by ammonolysis of LiPO 3 melts. The resulting compositions were determined to be LiPO 3-3z/2 N z , where 0 ≤ z ≤ 0.75, and the z value of 0.75 is among the highest ever reported for this series of LiPON glasses. The short-range order structures of the different resulting compositions were characterized by infrared, Raman, 31 P magic angle spinning nuclear magnetic resonance, and X-ray photoelectron spectroscopies. Instrumented nano-indentation was used to measure mechanical properties. It was observed that similar to previous studies, both trigonally coordinated (N t ) and doubly bonded (N d ) N co-exist in the glasses in about the same amounts for z ≤ 0.36, the limit of N content in most previous studies. For glasses with z > 0.36, it was found that the fraction of the N t increased significantly while the fraction of N d correspondingly decreased. The incorporation of nitrogen increased both the elastic modulus and hardness of the glass by approximately a factor of 1.5 when N/P ratio reaches 0.75. At the same time, an apparent embrittlement of the glass was observed due to nitridation, which was revealed by nanoindentation with an extra sharp nanoindenter tip.

25 ENERGY STORAGE↗
DOE OSTI2015

Designer synthetic media for studying microbial-catalyzed biofuel production

Background: The fermentation inhibition of yeast or bacteria by lignocellulose-derived degradation products, during hexose/pentose co-fermentation, is a major bottleneck for cost-effective lignocellulosic biorefineries. To engineer microbial strains for improved performance, it is critical to understand the mechanisms of inhibition that affect fermentative organisms in the presence of major components of a lignocellulosic hydrolysate. The development of a synthetic lignocellulosic hydrolysate (SH) media with a composition similar to the actual biomass hydrolysate will be an important advancement to facilitate these studies. In this work, we characterized the nutrients and plant-derived decomposition products present in AFEX™ pretreated corn stover hydrolysate (ACH). The SH was formulated based on the ACH composition and was further used to evaluate the inhibitory effects of various families of decomposition products during Saccharomyces cerevisiae 424A (LNH-ST) fermentation. Results: The ACH contained high levels of nitrogenous compounds, notably amides, pyrazines, and imidazoles. In contrast, a relatively low content of furans and aromatic and aliphatic acids were found in the ACH. Though most of the families of decomposition products were inhibitory to xylose fermentation, due to their abundance, the nitrogenous compounds showed the most inhibition. From these compounds, amides (products of the ammonolysis reaction) contributed the most to the reduction of the fermentation performance. However, this result is associated to a concentration effect, as the corresponding carboxylic acids (products of hydrolysis) promoted greater inhibition when present at the same molar concentration as the amides. Due to its complexity, the formulated SH did not perfectly match the fermentation profile of the actual hydrolysate, especially the growth curve. However, the SH formulation was effective for studying the inhibitory effect of various compounds on yeast fermentation. Conclusions: The formulation of SHs is an important advancement for future multi-omics studies and for better understanding the mechanisms of fermentation inhibition in lignocellulosic hydrolysates. The SH formulated in this work was instrumental for defining the most important inhibitors in the ACH. Major AFEX decomposition products are less inhibitory to yeast fermentation than the products of dilute acid or steam explosion pretreatments; thus, ACH is readily fermentable by yeast without any detoxification.

09 BIOMASS FUELS↗