Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Ab Initio Simulations of Tritium Diffusion in Al 2 O and Intermetallic Al 12 (TM) 2.34 Aluminide Coating Phases

Density functional theory simulations have been carried out to investigate the diffusion of interstitial tritium in Al 12 (TM) 2.34 and Al 2 O bulk phases. In Al 12 (TM) 2.34 the transition metal (TM) sites are occupied on average by 58.93 at.% Fe, 18.52 at.% Cr, and 22.54 at.% Ni. While the insertion of interstitial tritium in Al 2 O lead to a strong disordering of the structure, we only investigated interstitial tritium in Al 12 (TM) 2.34 and its iron end-member (i.e., Al 12 Fe 2.34 ). Nine diffusion pathways have been investigated along the a-, b-, and c -axis of Al 12 (TM) 2.34 . The direction of fastest diffusion for interstitial tritium is found to be along the b-axis, with a calculated diffusion coefficient of ≈10 -10 m 2 .s -1 at 600 K, which is at least one order of magnitude faster than those previously calculated for interstitial tritium in other Al-rich phases such as Fe2Alx, Fe4Al13, and FeNiAl5 for which D T =10 -11 m 2 .s -1 , ≈10 -12 m 2 .s -1 , and D T ≈10 -13 m 2 .s -1 respectively. The comparison of the energy landscape between Al 12 (TM) 2.34 and Al 12 Fe 2.34 for the fastest diffusion pathways in each axis direction, found that some pathways are not sensitive to transition metal mixing, while other are more affected, leading to higher energy barrier in Al 12 Fe 2.34 in part due to a more energetically favorable formation of Fe—T bond compared to Ni—T. However, we found that both materials have similar diffusion coefficients as the fastest diffusion pathways occurs along pathways that are not very sensitive to transition metal mixing.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Utilizing integrated neutron diffraction and elastoplastic self-consistent crystal plasticity model to quantitatively assess the strengthening mechanism in Al–12.5Ce and Al–12.5Ce–0.4Mg alloys

An integrated in-situ neutron diffraction and elastic plastic self-consistent crystal plasticity (EPSC-CP) modeling scheme is performed on a binary Al–12Ce alloy and a ternary Al–12Ce–0.4Mg alloys. Using this scheme, the constitutive parameters, i.e. elastic constants and slip system parameters of individual phases can be calibrated which can be used in microstructure-based CP models to predict materials performance. From this study, it is shown that the elastic constants of Al 11 Ce 3 intermetallics calculated from density function theory calculation in the literature are rather accurate. When applied to the EPSC-CP model, the lattice strains of both the binary and ternary alloys are correctly predicted as compared with experiments, and large lattice strain differences between Al (100) plane and Al 11 Ce 3 (010) plane are demonstrated. The slip system parameters calibrated by the scheme shows that the addition of 0.4 wt% Mg in the alloy has little influence on the critical resolved shear stress of initial dislocation glide in the Al matrix which caused plastic yield in the material. This can be explained by the very dilute Mg solute content in the Al solid solution, causing large spacing of Al–Mg lattice misfit sites and little impact on resistance of dislocation glide at initial yield. The 0.4 wt% Mg addition, on the other hand, has a large influence on the hardening term in the slip system parameters, indicating those Al–Mg misfit sites do help dislocation accumulation during the deformation. The impact of dilute Mg addition on the Al slip system parameters is also reflected in the flow behavior of the ternary alloy: little impact on the yield stress, but a large impact on working hardening and tensile strength of the materials which is consistent with the literature.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Phase formation in the CaO–Al 2 O 3 –ZnO system as an analogue to CaO–Al 2 O 3 –MgO in spinel containing refractories

Recently, gahnite (ZnAl 2 O 4 ) is gaining attraction as a potential refractory ceramic because of the similarity of its structure and properties with those of magnesium aluminate (MgAl 2 O 4 ) spinel refractories. Formation of MgO and hibonite solid solution (CaMg x Al 12−x O 19−0.5x ; 0 ≤ x ≤ 0.18), CAM-I (Ca 2 Mg 2−3x Al 28+2x O 46 (0 ≤ x ≤ 0.3), and CAM-II (CaMg 2−3x Al 16+2x O 27 , 0 ≤ x ≤ 0.2) phases with platelet and interlocking microstructure in the CaO–Al 2 O 3 –MgO ternary system significantly enhances the high temperature mechanical properties of refractory castables. The CaO–Al 2 O 3 –ZnO ternary system has been studied, for the first time to our knowledge, in a selected compositional range with reference to the CaO–Al 2 O 3 –MgO system from 1650°C to 1700°C. The formation of ZnO and hibonite solid solution (CaZn x Al 12−x O 19−0.5x ; 0 < x < 0.18), CAZ-I (Ca 2 Zn 2−3x Al 28+2x O 46 ; 0 ≤ x ≤ 0.3), and CAZ-II (CaZn 2−3x Al 16+2x O 27 ; 0 ≤ x ≤ 0.2) phases with platelet and interlocking morphology have been found. The crystal structures and lattice parameters of ZnO and hibonite solid solution, CAZ-I, and CAZ-II are comparable, respectively, with MgO and hibonite solid solution, CAM-I, and CAM-II. Furthermore, CAZ-I and CAZ-II phases also form due to reaction between hibonite (CaO·6Al 2 O 3 ) and ZnAl 2 O 4 .

calcium aluminate cement↗
DOE OSTI2022

Novel processing route for design and manufacturing of metal toughened nanoceramics: Al–Al 2 O 3 nanocermets

Monolithic alumina is a highly brittle ceramic with a very low fracture toughness, making it an unreliable material for mechanical and structural applications. Ceramic-metal composites (cermets) are the subject of intensive interest to obtain materials which can address the intrinsic brittleness of ceramics without compromising their high strength and light weight. In the present investigation, aluminium-alumina (Al–Al 2 O 3 ) nanocermets were developed. The nanocermets possessed the toughness of Al phase and the strength of reinforced nano Al 2 O 3 particles. Here, the nanocermets green bodies were prepared such that upon sintering each adjacent Al 2 O 3 grain was conformally coated with a continuous Al film. Mechanical milling via a combination of cryo-milling and ball-milling was used to prepare Al–Al 2 O 3 nano-powder mixture. Spark plasma sintering was used to consolidate the green nanocermets. Results show that specimens prepared from 35 h milled powders exhibited superior mechanical properties as compared to other nanocermets, with an improvement in microhardness, elastic modulus, compressive strength, and flexural strength by 88%, 78%, 69% and 40% with respect to sintered pure Al. The indentation toughness of 35 h milled nanocermet showed an increment of 12.5% with respect to sintered pure Al 2 O 3 . Characterization techniques such as XRD, SEM, HR-TEM, X-ray tomography were employed to investigate the phase evolution and structural morphology, while FEM simulations were performed for understanding the crack propagation mechanisms in nanocermets.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Formation of Al 3 Sc in Al 0.8 Sc 0.2 thin films

We report the formation of Al 3 Sc, in 100 nm Al 0.8 Sc 0.2 films, is found to be driven by exposure to high temperature through higher deposition temperature or annealing. High film resistivity was observed in films with lower deposition temperature that exhibited a lack of crystallinity, which is anticipated to cause more electron scattering. An increase in deposition temperature allows for the nucleation and growth of crystalline Al 3 Sc regions that were verified by electron diffraction. The increase in crystallinity reduces electron scattering, which results in lower film resistivity. Annealing Al 0.8 Sc 0.2 films at 600 °C in an Ar vacuum environment also allows for the formation and recrystallization of Al 3 Sc and Al and yields saturated resistivity values between 9.58 and 10.5 μΩ-cm regardless of sputter conditions. Al 3 Sc was found to nucleate and grow in a random orientation when deposited on SiO 2 , and highly {111} textured when deposited on 100 nm Ti and AlN films that were used as template layers. The rocking curve of the Al 3 Sc 111 reflection for the as-deposited films on Ti and AlN at 450 °C was 1.79° and 1.68°, respectively. Annealing the film deposited on the AlN template reduced the rocking curve substantially to 1.01° due to recrystallization of Al 3 Sc and Al within the film.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Microstructure of Neutron-Irradiated Al 3 Hf-Al Thermal Neutron Absorber Materials

A thermal neutron-absorbing metal matrix composite (MMC) comprised of Al 3 Hf particles in an aluminum matrix was developed to filter out thermal neutrons and create a fast flux environment for material testing in a mixed-spectrum nuclear reactor. Intermetallic Al 3 Hf particles capture thermal neutrons and are embedded in a highly conductive aluminum matrix that provides conductive cooling of the heat generated due to thermal neutron capture by the hafnium. These Al 3 Hf-Al MMCs were fabricated using powder metallurgy via hot pressing. The specimens were neutron-irradiated to between 1.12 and 5.38 dpa and temperatures ranging from 286 °C to 400 °C. The post-irradiation examination included microstructure characterization using transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy. This study reports the microstructural observations of four irradiated samples and one unirradiated control sample. All the samples showed the presence of oxide at the particle–matrix interface. The irradiated specimens revealed needle-like structures that extended from the surface of the Al 3 Hf particles into the Al matrix. An automated segmentation tool was implemented based on a YOLO11 computer vision-based approach to identify dislocation lines and loops in TEM images of the irradiated Al-Al 3 Hf MMCs. This work provides insight into the microstructural stability of Al 3 Hf-Al MMCs under irradiation, supporting their consideration as a novel neutron absorber that enables advanced spectral tailoring.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Cooperative Activation of CO 2 and Epoxide by a Heterobinuclear Al–Fe Complex via Radical Pair Mechanisms

Activation of inert molecules like CO 2 is often mediated by cooperative chemistry between two reactive sites within a catalytic assembly, the most common form of which is Lewis acid/base bifunctionality observed in both natural metalloenzymes and synthetic systems. Here, we disclose a heterobinuclear complex with an Al–Fe bond that instead activates CO 2 and other substrates through cooperative behavior of two radical intermediates. The complex L dipp (Me)AlFp (2, L dipp = HC{(CMe)(2,6- i Pr 2 C 6 H 3 N)} 2 , Fp = FeCp(CO) 2 , Cp = η 5 -C 5 H 5 ) was found to insert CO 2 and cyclohexene oxide, producing L dipp Al(Me)(μ:κ 2 -O 2 C)Fp (3) and L dipp Al(Me)(μ-OC 6 H 10 )Fp (4), respectively. Detailed mechanistic studies indicate unusual pathways in which (i) the Al–Fe bond dissociates homolytically to generate formally Al II and Fe I metalloradicals, then (ii) the metalloradicals add to substrate in a pairwise fashion initiated by O-coordination to Al. The accessibility of this unusual mechanism is aided, in part, by the redox noninnocent nature of L dipp that stabilizes the formally Al II intermediates, instead giving them predominantly Al III -like physical character. The redox noninnocent nature of the radical intermediates was elucidated through direct observation of L dipp Al(Me)(OCPh 2 ) (22), a metalloradical species generated by addition of benzophenone to 2. Complex 22 was characterized by X-band EPR, Q-band EPR, and ENDOR spectroscopies as well as computational modeling. As a result, the “radical pair” pathway represents an unprecedented mechanism for CO 2 activation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Slow ferromagnetic fluctuations in the kagome metal Sc 3 ⁢ Mn 3 ⁢Al 7 ⁢ Si 5 revealed by 27 Al NMR

Static and dynamical magnetic and electronic properties of the kagome metal Sc 3 ⁢Mn 3 ⁢ Al 7⁢ Si 5 have been investigated by 27 Al nuclear magnetic resonance (NMR) measurements. Two distinct 27 Al -NMR signals with two different values of quadrupolar frequencies of 𝜈 Q = 1.55(2) and 1.07(2) MHz are observed, which are assigned to Al(1) and Al(2), respectively. From the detailed NMR spectrum measurements under three different magnetic field directions and the density functional theory calculations, the principal axes of the electric field gradient for each Al site have been determined. The temperature dependence of Knight shift (𝐾) shows a similar temperature dependence of the DC magnetic susceptibility 𝜒 except for the low-temperature region below ∼50 K where 𝐾 is almost constant while 𝜒 keeps increasing, which suggests that the increase in 𝜒 at low temperatures is not intrinsic. 27 Al spin-lattice relaxation rate divided by temperature (1/𝑇 1 ⁢𝑇) is found to be constant, confirming the metallic state of Sc 3 ⁢Mn 3 ⁢ Al 7⁢ Si 5 from a microscopic point of view. Based on a Korringa ratio analysis using the 𝑇 1 and 𝐾 data, ferromagnetic fluctuations are found to dominate in Sc 3 ⁢Mn 3 ⁢ Al 7⁢ Si 5 . In conclusion, these fluctuations are suggested to be very slow with frequencies on the order of kilohertz or lower.

Ding, Qing-Ping [Ames Laboratory (AMES), Ames, IA ↗
DOE OSTI2022

A New Recycled Al–Si–Mg Alloy for Sustainable Structural Die Casting Applications

The use of secondary aluminum for structural components in the automotive industry is limited by the high Fe contents in recycled alloys which often result in the formation of brittle β-Al 5 FeSi phase which reduces the ductility of aluminum castings. In this study, a new secondary Al-Si-Mg alloy with high Fe content (about 0.44 wt.%) was developed for die casting applications. Based on thermodynamic modeling, manganese was added to obtain a designed Fe-to-Mn ratio of 2 which successfully suppressed the formation of β-Al 5 FeSi phase, by forming α-Al 15 (Fe,Mn) 3 Si 2 phase with rounded or hexagonal morphology. Additionally, a fine needle-like π-Al 8 FeMg 3 Si 2 phase was also formed within the eutectic regions. The new recycled alloy showed comparable mechanical properties in as-cast and heat treated (T5 and T6) conditions to three major primary die cast alloys (≤ 0.2 wt.% Fe) with similar composition. Ductility up to 7.4% from tensile elongation was achieved in as-cast recycled alloy due to the modification and refinement of α-Al 15 (Fe,Mn) 3 Si 2 by Mn and Sr additions. Tensile elongation was further improved to 9.1% after T6 treatment as a result of dissolution of π-Al 8 FeMg 3 Si 2 phase, defragmentation of α-Al 15 (Fe,Mn) 3 Si 2 and the spheroidization of Si phase. This new alloy provides a promising path for increasing usage of recycled aluminum with high Fe content in structural die castings for automotive and other applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The many faces of θ' -Al 2 Cu precipitates: Energetics of pristine and solute segregated Al/ θ' semi-coherent interfaces

θ'-Al 2 Cu precipitates in Al-Cu alloys have various distorted octagon shapes, which can be explained by the competition between {100} and {110} type semi-coherent interfaces with the Al matrix. While most prior studies on the semi-coherent Al/θ' interfaces have focused on the {100} orientation, little is known about the {110} interface. We have investigated the energetics of pristine and solute-segregated {110} semi-coherent Al/θ' interfaces with advanced characterization and first-principles studies. We report interfacial, strain, and solute segregation energetics of the {110} Al/θ' semi-coherent interface for 39 elements and compared them with previously reported values of the {100} interface. We discuss the atomic features and atomic local structures to identify similarities and differences between the two types of Al/θ' semi-coherent interfaces. Here, the isotropy in pristine Al/θ' semi-coherent interfacial energy and the anisotropy resulting from solute segregation provide insight into the formation of different types of θ' precipitate “faces” reported in the literature.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Eu 5 Al 3 Sb 6 : Al 4 Tetrahedra Embedded in a Rock-Salt-Like Structure

The new Eu 5 Al 3 Sb 6 phase has been successfully synthesized as a pure phase through Sn flux methods yielding large, high-quality crystals. This structure type features disordered Al clusters that appear in the form of dual tetrahedra. It crystallizes in the monoclinic C2/m space group exhibiting a rock-salt-like Eu–Sb framework with [Al 4 ] tetrahedra replacing some of the cationic Eu atoms (space group: C2/m, a = 8.151(1) Å, b = 14.181(2) Å, c = 8.145(1) Å, β = 109.577(2)°). The structure models the [Al 4 ] as dual tetrahedra with the Al atom sites 37.5% occupied along with Eu present on the central site at 8% occupancy and the remainder of the site being vacant. The presence of the [Al 4 ] cluster is further supported by HRTEM. Electronic structure calculations show that this material is a semimetal with observed band crossings close to the Fermi level. Strong Al–Sb antibonding interactions were found from COHP calculations close to the Fermi level and provide the rationale for the deficiency of the Al cluster. Mössbauer spectroscopy on Eu-151 and Sb-121 provides oxidation states of 2+ and 3– along with the local environment. Magnetic susceptibility measurements can be described well with a Curie–Weiss law where an effective moment of 7.80 μB/mol Eu is obtained, consistent with Eu 2+ , and show canted antiferromagnetic behavior below 10 K. Temperature dependent resistivity shows a Kondo-like low-temperature upturn caused by enhanced scattering of the itinerant electrons with the 4f orbitals of Eu.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Elucidating the local structure of Li 1+ x Al x Ti 2– x (PO 4 ) 3 and Li 3 Al x Ti 2– x (PO 4 ) 3 ( x = 0, 0.3) via total scattering

Li 1+x Al x Ti 2–x (PO 4 ) 3 (LATP) and Li 3 Al x Ti 2–x (PO 4 ) 3 (x = 0, 0.3) are promising candidates in all-solid-state batteries due to their high room temperature conductivity of 10 –3 S cm –1 and air- and moisture-stability. They also exhibit unusual thermal expansion properties, with Li 1+x Al x Ti 2–x (PO 4 ) 3 showing near-zero thermal expansion along the a axis while Li 3 Al x Ti 2–x (PO 4 ) 3 exhibits polynomial positive thermal expansion along the a axis and polynomial negative thermal expansion along the c axis. A crucial component to understanding these properties is understanding the local structure. Total scattering is a powerful analytical technique as it provides information on the long-range, average structure as well as the local structure. Here, we report the first X-ray and neutron total scattering experiments performed on Li 1+x Al x Ti 2–x (PO 4 ) 3 and Li 3 Al x Ti 2–x (PO 4 ) 3 (x = 0, 0.3). We show that the PO 4 and TiO 6 polyhedra experience very little expansion of the P/Ti–O bonds up to 800 °C, nor is there much expansion when the Li content increases significantly. The minor thermal expansion of the nearest-neighbor bonds of the polyhedra is revealed to be the reason behind the unusual thermal expansion properties, causing the near-zero thermal expansion along a in Li 1+x Al x Ti 2–x (PO 4 ) 3 and moving as whole units in Li 3 Al x Ti 2–x (PO 4 ) 3 . The structural robustness of the framework is also the reason for the increased conductivity as Li content increases, as the framework remains undistorted as Li content increases, permitting Li-ion mobility as the number of charge carriers increases. Finally, this suggests that phosphate-based framework materials beyond LATP would also be a good material space to explore for new Li-ion (and other ion-) conducting materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Highly deformable Mg–Al–Ca alloy with Al 2 Ca precipitates

Magnesium (Mg) is the lightest structural metal. However, the poor formability of Mg alloys to great extent limits their applications in making structural parts. Formability is strongly correlated to both high tensile elongation and large work hardening capacity. In this work, we report a new Mg-Al-Ca alloy in which a majority of deformable Al 2 Ca precipitates form while the formation of Laves phases of Mg 17 Al 12 and Mg 2 Ca seems suppressed. Al 2 Ca precipitates imped dislocation motion, leading to large work hardening. Then, Al 2 Ca precipitates deform with dislocations and stacking faults under the enhanced flow stress, which relieve local stress concentration and improve tensile elongation. In addition, solutes Al and Ca suppress twin nucleation while promoting non-basal dislocations in Mg. Our Mg-Al-Ca alloy demonstrates one of the highest combinations of tensile elongation and work hardening capacity among existing Mg alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Li + Diffusion in Amorphous and Crystalline Al 2 O 3 for Battery Electrode Coatings

Al 2 O 3 is often applied protectively to lithium-ion battery anode and cathode materials to inhibit surface degradation, suppress dendrite formation, and relieve mechanical stresses. Given the very high intrinsic band gap and diffusion barrier of the material, the mechanism that allows Li diffusion through these coatings is not well understood, and widely varying laboratory results indicate that there may be dependencies on morphology and stoichiometry. Using nudged elastic band calculations and ab initio molecular dynamics, we perform a systematic investigation across Al 2 O 3 structures, both crystalline and amorphous, and at various concentrations of Li + to uncover the optimal parameters for maximally diffusive coatings. We find a correlation between the low proximity of Li + to Al 3+ and the low Li + migration barrier. Although barriers are the lowest in the highly diffusive one-dimensional channels of crystalline θ-Al 2 O 3 , the system is structurally delicate and subject to detrimental distortion as the Li + content is increased. The α-Al 2 O 3 lattice is, conversely, highly stable against distortion at all Li + concentrations but disadvantageous for Li + migration. In amorphous systems, unscreened Li + –Li + Coulomb repulsion and pre-emptive occupation of “trapping sites” combine to lower the energy barriers as a function of increasing concentration. One of our most important findings is that Al-deficient materials can sharply increase Li + movement, and we predict that an amorphous material with a combination of high Li + concentration and Al deficiency would enable highly Li + -conductive protective coatings for electrodes.

25 ENERGY STORAGE↗
DOE OSTI2026

Er Al :Al 2 ⁢O 3 for telecom-band photonics: Electronic structure and optical properties

Er-doped Al 2 ⁢O 3 is a promising host for telecom-band integrated photonics. Here, in this study, we combine ab initio calculations with a symmetry-resolved analysis to elucidate substitutional Er on the Al site (Er Al ) in 𝛼−Al 2 ⁢O 3 . First-principles relaxations confirm the structural stability of Er Al . We then use the local trigonal crystal-field symmetry to classify the Er-derived impurity levels by irreducible representations and to derive polarization-resolved electric-dipole selection rules, explicitly identifying the symmetry-allowed 𝑓−𝑑 hybridization channels. Kubo-Greenwood absorption spectra computed from Kohn-Sham states quantitatively corroborate these symmetry predictions. Furthermore, we connect the calculated intra-4⁢𝑓 line strengths to Judd-Ofelt theory, clarifying the role of 4⁢𝑓−5⁢𝑑 admixture in enabling optical activity. Notably, we predict a characteristic absorption near 1.47 µ⁢m (telecom band), relevant for on-chip amplification and emission. To our knowledge, a symmetry-resolved first-principles treatment of Er:Al 2 ⁢O 3 with an explicit Judd-Ofelt interpretation has not been reported, providing a transferable framework for tailoring rare-earth dopants in wide-band-gap oxides for integrated photonics. Our results for the optical spectra are in good agreement with experimental data. The resulting symmetry-based selection rules translate directly to polarization-dependent coupling in Al 2 ⁢O 3 integrated photonic waveguides and resonators, enabling device-level design of TE/TM-mode interaction with Er emitters in the 1.5-µ⁢m telecom band.

Er-doped Al2O3↗
DOE OSTI2023

Thermomechanical Properties of Neutron Irradiated Al 3 Hf-Al Thermal Neutron Absorber Materials

A thermal neutron absorber material composed of Al 3 Hf particles in an aluminum matrix is under development for the Advanced Test Reactor. This metal matrix composite was fabricated via hot pressing of high-purity aluminum and micrometer-size Al 3 Hf powders at volume fractions of 20.0, 28.4, and 36.5%. Room temperature tensile and hardness testing of unirradiated specimens revealed a linear relationship between volume fraction and strength, while the tensile data showed a strong decrease in elongation between the 20 and 36.5% volume fraction materials. Tensile tests conducted at 200 °C on unirradiated material revealed similar trends. Evaluations were then conducted on specimens irradiated at 66 to 75 °C to four dose levels ranging from approximately 1 to 4 dpa. Tensile properties exhibited the typical increase in strength and decrease in ductility with dose that are common for metallic materials irradiated at ≤0.4T m . Hardness also increased with neutron dose. The difference in strength between the three different volume fraction materials was roughly constant as the dose increased. Nanoindentation measurements of Al 3 Hf particles in the 28.4 vol% material showed the expected trend of increased hardness with irradiation dose. Transmission electron microscopy revealed oxygen at the interface between the Al 3 Hf particles and aluminum matrix in the irradiated material. Scanning electron microscopy of the exterior surface of tensile tested specimens revealed that deformation of the material occurs via plastic deformation of the Al matrix, cracking of the Al 3 Hf particles, and to a lesser extent, tearing of the matrix away from the particles. The fracture surface of an irradiated 28.4 vol% specimen showed failure by brittle fracture in the particles and ductile tearing of the aluminum matrix with no loss of cohesion between the particles and matrix. The coefficient of thermal expansion decreased upon irradiation, with a maximum change of –6.3% for the annealed irradiated 36.5 vol% specimen.

36 MATERIALS SCIENCE↗