Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Ag Alloying in Cu 2– y Ag y Ba(Ge,Sn)Se 4 Films and Photovoltaic Devices

Trigonal Cu 2 BaGe 1–x Sn x Se 4 (CBGTSe) has recently gained interest as a potential photovoltaic absorber to target mitigation of antisite defect formation in Cu 2 ZnSn(S,Se) 4 . This study examines partial substitution of Cu by Ag as a potential approach to tune the properties of Ag-incorporated CBGTSe in the following aspects: 1) phase stability and crystal structure as a function of Ag content; 2) film morphology and grain structure; 3) charge carrier properties; 4) band positions; and 5) charge carrier kinetics and recombination. Up to 20% of Cu can be substituted by Ag in CBGTSe, while above 20% a phase mixture appears. Increasing Ag content induces larger average grain size and reduced hole carrier densities. In contrast, photoelectron spectroscopy and photoluminescence measurements reveal negligible impact of Ag substitution on ionization potential (≈5.4 eV) and electron affinity (≈3.7 eV). Also, Ag content offers negligible impact on carrier lifetimes (few ns). Consistent with these fundamental properties, solar cells based on two different Ag/(Ag + Cu) ratios (≈0% and ≈20%) show comparable power conversion efficiencies (≈2.7–2.8%). Finally, these results indicate that CBGTSe films and solar cells may be less sensitive to Ag substitution compared to Cu 2 ZnSn(S,Se) 4 , at least at the current level of absorber and device optimization.

14 SOLAR ENERGY↗
DOE OSTI2018

Unveiling the Structural Evolution of Ag 1.2 Mn 8 O 16 under Coulombically Controlled (De)Lithiation

MnO 2 materials are considered promising cathode materials for rechargeable lithium, sodium, and magnesium batteries due to their earth abundance and environmental friendliness. One polymorph of MnO 2 , α-MnO 2 , has 2 × 2 tunnels (4.6 Å × 4.6 Å) in its structural framework, which provide facile diffusion pathways for guest ions. In this work, a silver-ion-containing α-MnO 2 (Ag 1.2 Mn 8 O 16 ) is examined as a candidate cathode material for Li based batteries. Electrochemical stability of Ag 1.2 Mn 8 O 16 is investigated through Coulombically controlled reduction under 2 or 4 molar electron equivalents (e.e.). Terminal discharge voltage remains almost constant under 2 e.e. of cycling, whereas it continuously decreases under repetitive reduction by 4 e.e. Thus, detailed structural analyses were utilized to investigate the structural evolution upon lithiation. Significant increases in lattice a (17.7%) and atomic distances (~4.8%) are observed when x in Li x Ag 1.2 Mn 8 O 16 is >4. Ag metal forms at this level of lithiation concomitant with a large structural distortion to the Mn–O framework. In contrast, lattice a only expands by 2.2% and Mn–O/Mn-Mn distances show minor changes (~1.4%) at x < 2. The structural deformation (tunnel breakage) at x > 4 inhibits the recovery of the original structure, leading to poor cycle stability at high lithiation levels. This report establishes the correlation among local structure changes, amorphization processes, formation of Ag 0 , and long-term cycle stability for this silver-containing α-MnO 2 type material at both low and high lithiation levels.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Phase diagrams of the Tb-Ag-In and Dy-Ag-In systems at 870 K

The phase equilibria of Tb-Ag-In and Dy-Ag-In ternary systems have been studied at 870 K in the whole concentration range by means of X-ray powder, single crystal X-ray diffraction and EDX analyses. Isothermal sections of Tb-Ag-In and Dy-Ag-In phase diagrams at this temperature have been constructed. Both systems are characterized by formation of three ternary compounds: REAg{sub 3}In{sub 3} (YbAg{sub 2}In{sub 4}-type, space group Im-3), REAg{sub 2}In (MnCu{sub 2}Al-type, space group Fm-3m) and RE{sub 2}AgIn{sub 3} (CaIn{sub 2}-type, space group P6{sub 3}/mmc) RE=Tb, Dy. Homogeneity ranges of the ternary phases with CaIn{sub 2} structure type lies from 35 to 60 at% of In for Tb-containing phase and from 39 to 50 at% of In for Dy-containing phase. The existence of solid solutions based on REAg (CsCl-type, space group Pm-3m) binary compounds up to 30 at% of In and REIn{sub 3} (AuCu{sub 3}-type, space group Pm-3 m) binary compounds up to 5 at% of Ag has been found. - Graphical Abstract: Phase relations in the ternary systems Tb-Ag-In and Dy-Ag-In have been established for the isothermal section at T=870 K based on X-ray powder and single crystal diffraction analyses. The existence of three ternary compounds in each system were observed. Highlights: Black-Right-Pointing-Pointer Isothermal section of Tb-Ag-In system at T=870 K was constructed. Black-Right-Pointing-Pointer Isothermal section of Dy-Ag-In system at T=870 K was constructed. Black-Right-Pointing-Pointer Three ternary compounds and two solid solutions in each system were detected.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Effect of Ag nanoparticles deposition on photocatalytic activity of Ag{sub 2}SO{sub 3}

Highlights: • Ag{sub 2}SO{sub 3} was developed as novel photocatalyst. • The effect of Ag nanoparticles deposition on photocatalytic activity was investigated. • The activation and deactivation mechanism was proposed. - Abstract: A novel photocatalyst Ag{sub 2}SO{sub 3} was prepared and the effect of Ag nanoparticles, photo-deposited on the surface of Ag{sub 2}SO{sub 3}, on its photocatalytic activity was investigated. The as-prepared photocatalyst was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV–vis diffuse reflection spectroscopy (DRS). The photocatalytic activity was evaluated by photo-degradation of rhodamine B dye under UV light irradiation. It was found that the photocatalytic activity of Ag{sub 2}SO{sub 3} was initially enhanced with deposition of Ag nanoparticles, but subsequently declined with Ag nanoparticles overloaded. The possible mechanism was proposed based on experimental results. These findings may contribute to developing novel photocatalysts and understanding of fundamentals of Ag-based photocatalytic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Iodine Capture by Ag-Loaded Solid Sorbents Followed by Ag Recycling and Iodine Immobilization: An End-to-End Process

Here, this article demonstrates the complete process of I 2(g) capture using Ag-exchanged faujasite (AgX) and Ag-exchanged mordenite (AgZ) zeolite sorbents, the recovery of Ag for recyclability of iodine capture, and the immobilization of iodide (from the elution process) into an iodosodalite waste form, which is chemically and environmentally stable. The gaseous iodine, I 2(g) , was captured in the AgX via chemisorption by Ag and converted to AgI within the aluminosilicate zeolite frameworks. The elution reaction in Na 2 S resulted in the precipitation of Ag 2 S and dissolution of I – and Na + into the aqueous solution, where powdered sorbent showed higher conversion efficiency than the granular form, which is attributed to Na 2 S-solution diffusion limitations in the granules. The Ag 2 S-containing aluminosilicate precipitates were filtered out of the solution, and the filtrate (aqueous solution) was used to synthesize iodosodalite to immobilize iodide. The iodine capture using the recovered Ag 2 S-containing sorbents shows equivalent iodine loadings to the AgX starting material of Q e = 0.355 g/g for powdered material and 0.255 g/g for granular material, demonstrating the potential recycling of Ag for iodine capture as Ag 2 S-based sorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Battery Relevant Electrochemistry of Ag 7 Fe 3 (P 2 O 7 ) 4 : Contrasting Contributions from the Redox Chemistries of Ag + and Fe 3+

Ag 7 Fe 3 (P 2 O 7 ) 4 is an example of an electrochemical displacement material which contains two different electrochemically active metal cations, where one cation (Ag + ) forms metallic silver nanoparticles external to the crystals of Ag 7 Fe 3 (P 2 O 7 ) 4 via an electrochemical reduction displacement reaction, while the other cation (Fe +3 ) is electrochemically reduced with the retention of iron cations within the anion structural framework concomitant with lithium insertion. These contrasting redox chemistries within one pure cathode material enable high rate capability and reversibility when Ag 7 Fe 3 (P 2 O 7 ) 4 is employed as cathode material in a lithium ion battery (LIB). Further, pyrophosphate materials are thermally and electrically stable, desirable attributes for cathode materials in LIBs. In this article, a bimetallic pyrophosphate material Ag 7 Fe 3 (P 2 O 7 ) 4 is synthesized and confirmed to be a single phase by Rietveld refinement. Electrochemistry of Ag 7 Fe 3 (P 2 O 7 ) 4 is reported for the first time in the context of lithium based batteries using cyclic voltammetry and galvanostatic discharge–charge cycling. The reduction displacement reaction and the lithium (de)insertion processes are investigated using ex situ X-ray absorption spectroscopy and X-ray diffraction of electrochemically reduced and oxidized Ag 7 Fe 3 (P 2 O 7 ) 4 . Ag 7 Fe 3 (P 2 O 7 ) 4 exhibits good reversibility at the iron centers indicated by ~80% capacity retention over 100 cycles following the initial formation cycle and excellent rate capability exhibited by ~70% capacity retention upon a 4-fold increase in current.

25 ENERGY STORAGE↗
DOE OSTI2023

Sr(Ag 1− x Li x ) 2 Se 2 and [Sr 3 Se 2 ][(Ag 1− x Li x ) 2 Se 2 ] Tunable Direct Band Gap Semiconductors

Abstract Synthesizing solids in molten fluxes enables the rapid diffusion of soluble species at temperatures lower than in solid‐state reactions, leading to crystal formation of kinetically stable compounds. In this study, we demonstrate the effectiveness of mixed hydroxide and halide fluxes in synthesizing complex Sr/Ag/Se in mixed LiOH/LiCl. We have accessed a series of two‐dimensional Sr(Ag 1− x Li x ) 2 Se 2 layered phases. With increased LiOH/LiCl ratio or reaction temperature, Li partially substituted Ag to form solid solutions of Sr(Ag 1− x Li x ) 2 Se 2 with x up to 0.45. In addition, a new type of intergrowth compound [Sr 3 Se 2 ][(Ag 1− x Li x ) 2 Se 2 ] was synthesized upon further reaction of Sr(Ag 1− x Li x ) 2 Se 2 with SrSe. Both Sr(Ag 1− x Li x ) 2 Se 2 and [Sr 3 Se 2 ][(Ag 1− x Li x ) 2 Se 2 ] exhibit a direct band gap, which increases with increasing Li substitution ( x ). Therefore, the band gap of Sr(Ag 1− x Li x ) 2 Se 2 can be precisely tuned via fine‐tuning x that is controlled by only the flux ratio and temperature.

Zhou, Xiuquan↗
DOE OSTI2017

Bimetallic Ag-Pt Sub-nanometer Supported Clusters as Highly Efficient and Robust Oxidation Catalysts

A combined experimental and theoretical investigation of Ag-Pt sub-nanometer clusters as heterogeneous catalysts in the CO -> CO2 reaction (COox) is presented. Ag9Pt2 and Ag9Pt3 clusters are size-selected in the gas phase, deposited on an ultrathin amorphous alumina support, and tested as catalysts experimentally under realistic conditions and by first-principles simulations at realistic coverage. Insitu GISAXS/TPRx demonstrates that the clusters do not sinter or deactivate even after prolonged exposure to reactants at high temperature, and present comparable, extremely high COox catalytic efficiency. Such high activity and stability are ascribed to a synergic role of Ag and Pt in ultranano-aggregates, in which Pt anchors the clusters to the support and binds and activates two CO molecules, while Ag binds and activates O-2, and Ag/Pt surface proximity disfavors poisoning by CO or oxidized species.

Ab initio calculations↗
DOE OSTI2023

Sr(Ag 1-x Li x ) 2 Se 2 and [Sr 3 Se 2 ][(Ag 1-x Li x ) 2 Se 2 ] Tunable Direct Band Gap Semiconductors

Synthesizing solids in molten fluxes enables the rapid diffusion of soluble species at temperatures lower than in solid-state reactions, leading to crystal formation of kinetically stable compounds. Here, in this study, we demonstrate the effectiveness of mixed hydroxide and halide fluxes in synthesizing complex Sr/Ag/Se in mixed LiOH/LiCl. We have accessed a series of two-dimensional Sr(Ag 1-x Li x ) 2 Se 2 layered phases. With increased LiOH/LiCl ratio or reaction temperature, Li partially substituted Ag to form solid solutions of Sr(Ag 1-x Li x ) 2 Se 2 with x up to 0.45. In addition, a new type of intergrowth compound [Sr 3 Se 2 ][(Ag 1-x Li x ) 2 Se 2 ] was synthesized upon further reaction of Sr(Ag 1-x Li x ) 2 Se 2 with SrSe. Both Sr(Ag 1-x Li x ) 2 Se 2 and [Sr 3 Se 2 ][(Ag 1-x Li x ) 2 Se 2 ] exhibit a direct band gap, which increases with increasing Li substitution (x). Therefore, the band gap of Sr(Ag 1-x Li x ) 2 Se 2 can be precisely tuned via fine-tuning x that is controlled by only the flux ratio and temperature.

2D materials↗
DOE OSTI2021

Modification of Catalytic Properties of Hollandite Manganese Oxide by Ag Intercalation for Oxidative Acetalization of Ethanol to Diethoxyethane

The effect of addition of Ag to the catalytic properties of hollandite manganese oxide (HMO) was investigated for the oxidative acetalization of ethanol to diethoxyethane. Based on analysis with HRTEM, XRD, and EXAFS, Ag introduced onto HMO by deposition/precipitation was found to be present in different forms in the final catalyst depending on the calcination temperature. It could exist as nanoparticles on the outside surface of HMO nanorods for samples calcined at 60 °C, and as Ag atoms intercalated into the tunnels of the HMO structure for samples calcined at 500 °C. NH 3 desorption results showed that intercalation of Ag resulted in stronger Lewis acidic sites on HMO, which DFT computational results suggested to be due to Ag-induced electron redistribution in the HMO framework. Here, the intercalation of Ag atoms also made the HMO more easily reducible by lowering the H 2 reduction temperature from 500 to 200 °C. Consequently, the sample with intercalated Ag was more active for ethanol oxidation to acetaldehyde, achieving nearly 100% conversion of ethanol and acetaldehyde by 360 °C, and acetalization of acetaldehyde with ethanol to produce diethoxyethane selectively, resulting in 93.5% diethoxyethane yield, which was 10% higher than with samples containing Ag nanoparticles on HMO. This study demonstrated a little-studied phenomenon in which a metal alters the catalytic properties of an oxide electronically but not structurally and without direct participation in the reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Effects of Ag addition on FePt L1{sub 0} ordering transition: A direct observation of ordering transition and Ag segregation in FePtAg alloy films

FePt and (FePt){sub 91.2}Ag{sub 8.8} alloy films were deposited by magnetron sputtering. The average coercivity of (FePt){sub 91.2}Ag{sub 8.8} films reaches 8.51 × 10{sup 5} A/m, which is 0.63 × 10{sup 5} A/m higher than that of the corresponding FePt films. Ag addition effectively promotes the FePt L1{sub 0} ordering transition at a relatively low annealing temperature of 400 °C. The promotion mechanism was investigated by using in situ high-resolution transmission electron microscopy (HRTEM) and ex situ X-ray absorption fine structure (XAFS). The concurrence of ordering transition and Ag segregation in FePtAg alloy films was first observed by using in situ heating HRTEM. The time-resolved evolution reveals more details on the role of Ag addition in FePt low-temperature ordering. Ex situ XAFS results further confirm that Ag replaces Fe sites in the as-deposited films and segregates from FePt-Ag solid solution phase through annealing at elevated temperatures. The segregation of Ag atoms leaves vacancies in the grain. The vacancy formation is believed to accelerate the diffusion of Fe and Pt atoms, which is critical for the L1{sub 0} ordering transition.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Pressure induced Ag{sub 2}Te polymorphs in conjunction with topological non trivial to metal transition

Silver telluride (Ag{sub 2}Te) is well known as superionic conductor and topological insulator with polymorphs. Pressure induced three phase transitions in Ag{sub 2}Te have been reported in previous. Here, we experimentally identified high pressure phase above 13 GPa of Ag{sub 2}Te by using high pressure synchrotron x ray diffraction method in combination with evolutionary crystal structure prediction, showing it crystallizes into a monoclinic structure of space group C2/m with lattice parameters a = 6.081Å, b = 5.744Å, c = 6.797 Å, β = 105.53°. The electronic properties measurements of Ag{sub 2}Te reveal that the topologically non-trivial semiconducting phase I and semimetallic phase II previously predicated by theory transformed into bulk metals for high pressure phases in consistent with the first principles calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Influence of Ag metal dispersion on the thermal conversion of ethanol to butadiene over Ag-ZrO 2 /SiO 2 catalysts

Atomistic scale models were developed and coupled with experimental investigation to deliver a functional understanding of catalytic activity and selectivity in the conversion of ethanol to 1,3-butadiene over Ag/ZrO 2 /SiO 2 . A detailed evaluation of the structural and electronic properties of the resultant catalyst models led to the identification of critical active sites of the catalyst. More importantly, the extent of Ag dispersion on the SiO 2 support and relative proximity to ZrO 2 were found to vary with the oxidation state of Ag and local coordination environment (Ag-O SiO2 ) allowing for critical control of ethanol conversion towards butadiene or ethylene. Simulations revealed that less dispersed or clustered Ag contain predominantly Ag 0 charge state and promote conversion of ethanol to ethylene. The well-dispersed Ag/ZrO 2 /SiO 2 catalyst instead contain a larger fraction of cationic Ag δ+ , and predominantly promote ethanol dehydrogenation and subsequent production of butadiene. The theoretical insights drawn were validated and confirmed experimentally using TEM, XRD and reactivity measurements demonstrating the effect of Ag dispersion on the selectivity of ethanol conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A spectroscopic, structural, and computational study of Ag–oxo interactions in Ag + /UO 2 2+ complexes

For this work, twelve novel Ag + /UO 2 2+ heterometallic complexes have been prepared and characterized via structural, spectroscopic, and computational methods to probe the effects of Ag–oxo interactions on bonding and photophysical properties of the uranyl cation. Structural characterization reveals Ag–oxo interaction distances ranging from 2.475(3) Å to 4.287(4) Å. These interactions were probed using luminescence and Raman spectroscopy which displayed little effect on the luminescence intensity and the energy of the Raman active U&#x2550;O symmetric stretch peak as compared to previously reported Pb–oxo interactions. Computational efforts via density functional theory-based natural bond orbital analysis revealed that the highest stabilization energy associated with the Ag–oxo interaction had a value of only 11.03 kcal mol –1 and that all other energy values fell at 7.05 kcal mol –1 or below indicating weaker interactions relative to those previously reported for Pb 2+ /UO 2 2+ heterometallic compounds. In contrast, quantum theory of atoms in molecules analysis of bond critical point electron density values indicated higher electron density in Ag–oxo interactions as compared to Pb–oxo interactions which suggests more covalent character with the Ag + . Overall, this data indicates that Ag + has a less significant effect on UO 2 2+ bonding and photophysical properties as compared to other Pb 2+ , likely due to the high polarizability of the cation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗