Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AERODYNAMIC CHARACTERISTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Aerodynamic characteristics at high angles of attack

An overview is presented of the aerodynamic inputs required for analysis of flight dynamics in the high-angle-of-attack regime wherein large-disturbance, nonlinear effects predominate. An outline of the presentation is presented. The discussion includes: (1) some important fundamental phenomena which determine to a large extent the aerodynamic characteristics of airplanes at high angles of attack; (2) static and dynamic aerodynamic characteristics near the stall; (3) aerodynamics of the spin; (4) test techniques used in stall/spin studies; (5) applications of aerodynamic data to problems in flight dynamics in the stall/spin area; and (6) the outlook for future research in the area.

Chambers, J. R.↗
NASA NTRS1972

Wind-tunnel investigation of basic aerodynamic characteristics of a supercritical-wing research airplane configuration

Transonic pressure tunnel and transonic tunnel tests were performed to determine the aerodynamic characteristics of a 0.087 scale model of a supercritical wing research airplane configuration at Mach numbers from 0.25 to 1.30. The investigation included tests to determine the basic longitudinal aerodynamic characteristics, the lateral-directional aerodynamic characteristics for sideslip angles of 0 deg and + or - 2.5 deg, and the effects of Reynolds number and aeroelasticity.

Dennis W Bartlett↗
NASA NTRS1984

An experimental and theoretical analysis of the aerodynamic characteristics of a biplane-winglet configuration

Improving the aerodynamic characteristics of an airplane with respect to maximizing lift and minimizing induced and parasite drag are of primary importance in designing lighter, faster, and more efficient aircraft. Previous research has shown that a properly designed biplane wing system can perform superiorly to an equivalent monoplane system with regard to maximizing the lift-to-drag ratio and efficiency factor. Biplanes offer several potential advantages over equivalent monoplanes, such as a 60-percent reduction in weight, greater structural integrity, and increased roll response. The purpose of this research is to examine, both theoretically and experimentally, the possibility of further improving the aerodynamic characteristics of the biplanes configuration by adding winglets. Theoretical predictions were carried out utilizing vortex-lattice theory, which is a numerical method based on potential flow theory. Experimental data were obtained by testing a model in the Pennsylvania State University's subsonic wind tunnel at a Reynolds number of 510,000. The results showed that the addition of winglets improved the performance of the biplane with respect to increasing the lift-curve slope, increasing the maximum lift coefficient, increasing the efficiency factor, and decreasing the induced drag. A listing of the program is included in the Appendix.

Gall, P. D.↗
NASA NTRS1981

Wing-alone aerodynamic characteristics at high angles of attack

An experimental investigation has been conducted to determine wing-alone supersonic aerodynamic characteristics at high angles of attack. The family of wings tested varied in aspect ratio from 0.5 to 4.0 and taper ratio from 0.0 to 1.0. The wings were tested at angles of attack ranging from 0 to 60 deg and Mach numbers from 1.6 to 4.6. The aerodynamic characteristics were obtained by integrating local pressures measured over the wing surface. Comparison of these data with the limited available data from the literature indicate the present data are free of sting interference effects through the test range of angle of attack. Presented and discussed are results showing the effects of model geometry, Mach number and angle of attack on aerodynamic characteristics consisting of normal force, pitching moment, bending moment, longitudinal center-of-pressure locations, and lateral center-of-pressure locations.

Stallings, R. L., Jr.↗
NASA NTRS1983

A review of preflight estimates of real-gas effects on space shuttle aerodynamic characteristics

Preflight estimates of the hypersonic aerodynamic characteristics of the Shuttle orbiter were based on a diverse series of research studies using state of the art techniques developed by basic research in the 60's and 70's. Real-gas viscous calculations on simple shapes that were used to evaluate correlation parameters indicated that real-gas effects reduce aerodynamic forces and moments. Inviscid calculations on winged lifting shapes indicated reduced forces and a slight nose-up pitch resulted because of real-gas effects. Analysis of the extensive wind tunnel data base indicated viscous correlation parameters provided the most appropriate extrapolation technique for estimating flight aerodynamics. Variations because of changes in the ratio of specific heats, which was the only available experimental tool for evaluating real-gas effects, indicated that reduced loads and nose-up pitching moments would occur at high altitudes and Mach numbers but that the values would not exceed the tolerances and variations established about the aerodynamic design data book values derived from viscous correlations. During STS-1, nose-up pitching moments exceeded the established variations.

Woods, W. C.↗
NASA NTRS1995

Hypersonic Aerodynamic Characteristics of a Proposed Single-Stage-To-Orbit Vehicle

The hypersonic aerodynamic characteristics of a winged body concept representing a candidate single- stage-to-orbit vehicle which features wing tip fin controllers and elevon/body flap control surfa'Fs are predicted at points along a nominal trajectory for Mach numbers from 5 to 27 and angles of attack from 19 to 32 degrees. Predictions are derived from surface properties based on flow solvers for inviscid and viscous, laminar flows acting as a perfect gas, as a gas in chemical equilibrium and as a gas in chemical non- equilibrium. At a Mach number of 22, the lateral aerodynamic characteristics of the vehicle are determined based on an inviscid analysis at side slip angles of 2 and 4 degrees and 32 degrees angle of attack; a viscous analysis was carried out to determine the effect of gas chemistry model on surface pressure and to determine the incremental aerodynamics for control surface deflections. The results show that the longitudinal pitch characteristics of the baseline configuration, i.e., zero control surface deflections, are significantly altered by real gas chemistry at angles of attack greater than 30 degrees and Mach numbers greater than 9; and, that aerodynamics derived from inviscid solutions are of sufficient accuracy for preliminary analysis. Also, it is shown that a Mach number of 22, the choice of gas chemistry model has a large impact on surface pressure levels at highly localized regions on the vehicle and that the vehicle can be trimmed at control surface deflections less than 11 degrees.

Weilmuenster, K. James↗
NASA NTRS1966

Aerodynamic characteristics of a V/STOL TRANSPORT model with lift and lift-cruise fan power plants

The aerodynamic characteristics of lift fans mounted ahead of the wing, rotating cruise fans, and tandem mounted lift fans faired into the wing have been studied. The tests results indicated that the complete configurations, that is, the lift-cruise fan and tandem lift fan configurations, had generally acceptable aerodynamic characteristics. The positive induced lift due to fan flow interference with the airplane flow field was a small percentage of the installed thrust but was adequate to provide significant increases in payload with STOL operation.

JET TRANSPORT↗
NASA NTRS1933

The effect of partial-span split flaps on the aerodynamic characteristics of a Clark Y wing

Aerodynamic force tests were made in the N.A.C.A. 7 by 10 foot wind tunnel on a model Clark Y wing with a 20 percent chord split flap deflected 60 degrees downward. The tests were made to determine the effect of partial-span split flaps, located at various positions along the wing span on the aerodynamic characteristics of the wing-and-flap combination. The different lengths and locations of the flaps were obtained by cutting off portions of a full-span flap, first from the tips and then from the center. The results are given in the form of curves of lift, drag, and center of pressure. They show that with partial-span split flaps both the lift and drag are less than with full-span flaps; that the lift for a given length of flap is somewhat greater when the partial span is located at the center of the wing than when it is located at the tip portion, and that the drag for a given length of flap is the same regardless of the location over the flap with respect to the wing span.

Wenzinger, Carl J↗
NASA NTRS1972

Effect of wing design on the longitudinal aerodynamic characteristics of a wing-body model at subsonic speeds

An investigation has been conducted to determine the effects of wing camber and twist on the longitudinal aerodynamic characteristics of a wingbody configuration. Three wings were used each having the same planform (aspect ratio of 2.5 and leading-edge sweep angle of 44 deg.) but differing in amounts of camber and twist (wing design lift coefficient). The wing design lift coefficients were 0, 0.35, and 0.70. The investigation was conducted over a Mach number range from 0.20 to 0.70 at angles of attack up to about 22 deg. The effect of wing strakes on the aerodynamic characteristics of the cambered wings was also studied. A comparison of the experimentally determined aerodynamic characteristics with theoretical estimates is also included.

Henderson, W. P.↗
NASA NTRS1983

Application of a full potential method for predicting supersonic flow fields and aerodynamic characteristics

A nonlinear aerodynamic prediction technique which solves the conservative full potential equation has been applied to the analysis of three waverider configurations. This technique was selected based on its capability to analyze the off-design characteristics of the waveriders. Very good correlations were achieved with surface pressure data for both the Mach 4 elliptic cone waverider and the Mach 6 caret-wing derivative. Off-design Mach number and angle-of-attack pressure correlations were very good for the elliptic cone waverider. The range of correlation with data exceeded that expected based on the theory limitations. A surface pressure integration routine was demonstrated and agreement between predicted aerodynamic forces and experimental force data for the Mach 4 waverider was excellent. Analysis of a nonconical waverider configuration was initiated where a discrete input option is used to achieve the computational gridding. Preliminary analysis of this configuration indicates the correct shock location will be predicted.

Jones, K. M.↗
NASA NTRS1983

Aerodynamic characteristics of a series of bodies with variations in nose camber

The aerodynamic characteristics of a series of cambered forebody models having a systematic variation in nose droop angle were determined from tests in the Langley 8-Foot Transonic Pressure Tunnel at Mach numbers from 0.60 to 1.20 and in the Langley Unitary Plan Wind Tunnel at Mach numbers of 1.47, 1.80, and 2.16. The models were tested through an angle-of-attack range of about 0 deg to 12 deg in the 8-Foot Transonic Pressure Tunnel and -2 deg to 20 deg in the Unitary Plan Wind Tunnel. Static longitudinal aerodynamic characteristics of the models were determined for all Mach numbers, and lateral-directional characteristics were determined for Mach numbers of 1.47 to 2.16. The investigation indicated that the principal effect of varying nose droop was on pitching moment, with some secondary effects on lift and drag. The experimental data were also compared with theoretical estimates.

Shrout, B. L.↗
NASA NTRS1972

Effects of Reynolds number and body corner radius on aerodynamic characteristics of a space shuttle-type vehicle at subsonic Mach numbers

Static aerodynamic forces and moments were measured to study the effects of Reynolds number and body corner radius on the aerodynamic characteristics of a straight wing space shuttle orbiter at subsonic speeds. A 0.02-scale model was tested at Mach numbers from 0.3 to 0.9 and Reynolds numbers from about 600,000 to 3 million, based on body width. The body alone and the body with its wing and horizontal tail attached were tested at angles of attack from 35 to 75 degrees. The effects of rounding the body corners at the junctures connecting the bottom and sides were investigated for corner radii from 0 to 8.5 percent of the body width. At low subsonic Mach numbers (free stream Mach number approximately equal 0.3) the aerodynamic characteristics are affected significantly by changes in Reynolds number and body corner radius. With increase in Mach number to free stream Mach number = 0.9 the effect of Reynolds number seems to vanish, but a significant effect of body corner radius remains.

Jorgensen, L. H.↗