Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTIVATION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Influence of several metal ions on the gelation activation energy of silicon tetraethoxide

The effects of nine metal cations Li(+), Na(+), Mg(2+), Ca(2+), Sr(2+), Cu(2+), Al(3+), La(3+), and Y(3+) on silica gel formation has been investigated by studying the hydrolysis and polycondensation of silicon tetraethoxide (TEOS) in the presence of metal nitrates. The influence of water:TEOS mole ratio, metal ion concentration, and the reaction temperature has been investigated. The overall activation energy for gel formation has been determined from the temperature dependence of the time of gelation for each system. The activation energy for -Si-O-Si- network formation is found to be 54.5 kJ/mol. The gel formation time as well as the activation energy sharply increase in the presence of Cu(2+), Al(3+), La(3+) and Y(3+). In contrast, the presence of Li(+), Na(+), Mg(2+), Ca(2+), or Sr(2+) lowers the gelation time, but has no appreciable effect on the activation energy. This difference may be attributed to the participation or nonparticipation of the metal ions in the formation of the three-dimensional polymeric network during the polycondensation step. The concentration of metal ion Mg(2+), Ca(2+), Y(3+) or the water:TEOS mole ratio had no appreaciable effect on the gelation activation energy. A simple test has been proposed to determine whether a metal ion would act as a network intermediate or modifier in silica and other glassy networks.

Bansal, Narottam P.↗
DOE OSTI2018

Polymer etching by atmospheric-pressure plasma jet and surface micro-discharge sources: Activation energy analysis and etching directionality

Treatments of polymer films using either a MHz atmospheric pressure plasma jet (APPJ) or an atmospheric pressure surface micro-discharge (SMD) plasma are investigated. While the typical approach to determine relevant reactive species is to correlate surface effects with gas phase species measurement, this does not capture potential synergistic or other complex effects that may be occurring. Activation energy and directionality of the etching process can characterize what is occurring at the surface for these processes in more detail. The APPJ source shows an apparent activation energy of ~0.18 eV at 8 mm distance and up to ~0.34 eV at 16mmdistance for a temperature range of 20–80 °C tested with thin polymer films. The APPJ source shows directional etching at 8 mm distance with less anisotropy the more distance is increased. The SMD source has an apparent activation energy of ~0.8–0.9 eV at a distance of 3 mm. The SMD also only shows isotropic etching behavior. However the SMD surface chemistry changes significantly to less oxidation with increased temperature while the APPJ source induced modifications remain very similar with temperature change. The lower apparent activation energy of the APPJ induced etching reactions as compared with low pressure work (0.5 eV) and observation of line-of-sight contribution to etching suggests the involvement of a directional species at closer distances facilitating the etching which falls off with increasing distance. The high activation energy of the SMD suggests that species with less capability for etching is responsible compared to the APPJ and low pressure plasma. In conclusion, the high surface oxidation from low temperature SMD treatments shows that the surface is being oxidized but not sufficiently to reach the desorption step of the etching process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2015

Thermodynamic Derivation of the Activation Energy for Ice Nucleation

Cirrus clouds play a key role in the radiative and hydrological balance of the upper troposphere. Their correct representation in atmospheric models requires an understanding of the microscopic processes leading to ice nucleation. A key parameter in the theoretical description of ice nucleation is the activation energy, which controls the flux of water molecules from the bulk of the liquid to the solid during the early stages of ice formation. In most studies it is estimated by direct association with the bulk properties of water, typically viscosity and self-diffusivity. As the environment in the ice-liquid interface may differ from that of the bulk, this approach may introduce bias in calculated nucleation rates. In this work a theoretical model is proposed to describe the transfer of water molecules across the ice-liquid interface. Within this framework the activation energy naturally emerges from the combination of the energy required to break hydrogen bonds in the liquid, i.e., the bulk diffusion process, and the work dissipated from the molecular rearrangement of water molecules within the ice-liquid interface. The new expression is introduced into a generalized form of classical nucleation theory. Even though no nucleation rate measurements are used to fit any of the parameters of the theory the predicted nucleation rate is in good agreement with experimental results, even at temperature as low as 190 K, where it tends to be underestimated by most models. It is shown that the activation energy has a strong dependency on temperature and a weak dependency on water activity. Such dependencies are masked by thermodynamic effects at temperatures typical of homogeneous freezing of cloud droplets; however, they may affect the formation of ice in haze aerosol particles. The new model provides an independent estimation of the activation energy and the homogeneous ice nucleation rate, and it may help to improve the interpretation of experimental results and the development of parameterizations for cloud formation.

Cirrus clouds↗
DOE OSTI2018

Activation energy of metastable amorphous Ge 2 Sb 2 Te 5 from room temperature to melt

Resistivity of metastable amorphous Ge 2 Sb 2 Te 5 (GST) measured at device level show an exponential decline with temperature matching with the steady-state thin-film resistivity measured at 858 K (melting temperature). This suggests that the free carrier activation mechanisms form a continuum in a large temperature scale (300 K – 858 K) and the metastable amorphous phase can be treated as a super-cooled liquid. The effective activation energy calculated using the resistivity versus temperature data follow a parabolic behavior, with a room temperature value of 333 meV, peaking to ~377 meV at ~465 K and reaching zero at ~930 K, using a reference activation energy of 111 meV (3kBT/2) at melt. Amorphous GST is expected to behave as a p-type semiconductor at T melt ~ 858 K and transitions from the semiconducting-liquid phase to the metallic-liquid phase at ~930 K at equilibrium. The simultaneous Seebeck (S) and resistivity versus temperature measurements of amorphous-fcc mixed-phase GST thin-films show linear S-T trends that meet S = 0 at 0 K, consistent with degenerate semiconductors, and the dS/dT and room temperature activation energy show a linear correlation. The single-crystal fcc is calculated to have dS/dT = 0.153 μ V/K 2 for an activation energy of zero and a Fermi level 0.16 eV below the valance band edge.

36 MATERIALS SCIENCE↗
DOE OSTI2018

The Effect of Using Different Y{sub 2}O{sub 3} Layers on the Activation Energy and Irreversibility Line of MPMG YBCO Bulk at 1050 °C Growth Temperature

In this study, three kinds of YBCO samples which are named Y1, Y2 and Y3 were fabricated by a melt–powder–melt–growth (MPMG) method. The Y1 sample was placed into a platinum (Pt) crucible without Y{sub 2}O{sub 3}, the Y2 sample was located on a Al{sub 2}O{sub 3} crucible with a freely poured Y{sub 2}O{sub 3} powder and the Y3 sample was located on a Al{sub 2}O{sub 3} crucible with a 1-mm-thick buffer layer of Y{sub 2}O{sub 3}. YBCO samples were investigated by magnetoresistivity (ρ–T) measurements in dc magnetic fields (parallel to the c-axis) up to 5 T. The effect of the Y{sub 2}O{sub 3} layer on the activation energy and irreversible flux of the samples was studied. The activation energies (U) were determined using the Arrhenius activation energy law from ρ–T. The power law relationship for U with H{sup −α} was investigated. α was calculated to find out which defects were dominant in the samples. Irreversibility fields (H{sub irr}) and upper critical fields (H{sub c2}) were obtained using 10 and 90% criteria of the normal-state resistivity value from ρ–T curves. Irreversibility lines (ILs) were estimated from the equation H{sub irr} ∼ (1 − T{sub irr}(H)/T{sub irr}(0)){sup n}. The fitting results to giant flux creep and vortex glass models were discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1981

Calculation of activation energies for hydrogen-atom abstractions by radicals containing carbon triple bonds

Activation energies are calculated by the bond-energy-bond-order (BEBO) and the bond-strength-bond-length (BSBL) methods for the reactions of C2H radicals with H2, CH4, and C2H6 and for the reactions of CN radicals with H2 and CH4. The BSBL technique accurately predicts the activation energies for these reactions while the BEBO method yields energies averaging 9 kcal higher than those observed. A possible reason for the disagreement is considered.

Brown, R. L.↗
DOE OSTI2020

Phase Change-Driven Negative Activation Energies in Pd/Carbon-Based/Organic Getter Hydrogenation Reactions

In this study, the hydrogenation of 1,4-diphenylbutadiyne (DPB) blended with carbon-supported Pd (DPB–Pd/C) in the form of pellets was investigated by isothermal–isobaric experiments at 1333 Pa of H 2 and in the temperature range of 291–315 K. The extracted kinetics were then used in conjunction with a complementary constant rate of H 2 input experimentation to model the performance of a DPB-catalysis/support system as a function of temperature and H 2 partial pressure. First-principles density functional theory (DFT) calculations were also performed to shed light on the molecular level energetics of DPB and its intermediate states. A seemingly puzzling formation of alternate positive activation energy barrier (higher reaction rate with higher temperature) and negative activation energy barrier (higher reaction rate with lower temperature) zones during the hydrogenation process was discovered. However, this observed phenomenon can be logically explained in terms of the associated phase changes and H 2 transport in the material. This work provides a good illustration of a rarely encountered chemical process with a negative activation energy barrier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Composition-dependent apparent activation-energy and sluggish grain-growth in high entropy alloys

Experimental results reveal that the apparent activation-energy for grain-growth in an fcc-based Al x CoCrFeNi high entropy alloy (HEA) system increases from 179 to 486 kJ/mol when the Al content increases from x = 0.1 to 0.3. These unexpectedly high apparent activation-energy values can be potentially attributed to solute clustering within the fcc solid-solution phase that develops with increasing Al content in this HEA. Detailed microstructural analysis using atom-probe tomography and density functional theory (DFT) calculations strongly indicate the presence of such nanoscale clusters. This phenomenon can change grain-growth from a classical solute-drag regime to a much more sluggish cluster-drag based mechanism in these HEAs.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Suppression of activation energy and superconductivity by the addition of Al{sub 2}O{sub 3} nanoparticles in CuTl-1223 matrix

Low anisotropic (Cu{sub 0.5}Tl{sub 0.5})Ba{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10−δ} (CuTl-1223) high T{sub c} superconducting matrix was synthesized by solid-state reaction and Al{sub 2}O{sub 3} nanoparticles were prepared separately by co-precipitation method. Al{sub 2}O{sub 3} nanoparticles were added with different concentrations during the final sintering cycle of CuTl-1223 superconducting matrix to get the required (Al{sub 2}O{sub 3}){sub y}/CuTl-1223, y = 0.0, 0.5, 0.7, 1.0, and 1.5 wt. %, composites. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy, energy dispersive X-ray, and dc-resistivity (ρ) measurements. The activation energy and superconductivity were suppressed with increasing concentration of Al{sub 2}O{sub 3} nanoparticles in (CuTl-1223) matrix. The XRD analysis showed that the addition of Al{sub 2}O{sub 3} nanoparticles did not affect the crystal structure of the parent CuTl-1223 superconducting phase. The suppression of activation energy and superconducting properties is most probably due to weak flux pinning in the samples. The possible reason of weak flux pinning is reduction of weak links and enhanced inter-grain coupling due to the presence of Al{sub 2}O{sub 3} nanoparticles at the grain boundaries. The presence of Al{sub 2}O{sub 3} nanoparticles at the grain boundaries possibly reduced the number of flux pinning centers, which were present in the form of weak links in the pure CuTl-1223 superconducting matrix. The increase in the values of inter-grain coupling (α) deduced from the fluctuation induced conductivity analysis with the increased concentration of Al{sub 2}O{sub 3} nanoparticles is a theoretical evidence of improved inter-grain coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

A high-conduction Ge substituted Li3AsS4 solid electrolyte with exceptional low activation energy

In lithium-ion conducting solid electrolytes the potential to enable high-energy-density secondary batteries and offer distinctive safety features as an advantage over traditional liquid electrolytes is shown. Achieving the combination of high ionic conductivity, low activation energy, and outstanding electrochemical stability in crystalline solid electrolytes is a challenge for the synthesis of novel solid electrolytes. We report an exceptionally low activation energy (Ea) and high room temperature superionic conductivity via facile aliovalent substitution of Li 3 AsS 4 by Ge, which increased the conductivity by two orders of magnitude as compared to the parent compound. The composition Li 3.334 Ge 0.334 As 0.666 S 4 has a high ionic conductivity of 1.12 mScm -1 at 27°C. Local Li + hopping in this material is accompanied by distinctive low activation energy Ea of 0.17 eV being the lowest of Li + solid conductors. Finally, our study demonstrates the efficacy of surface passivation of solid electrolyte to achieve compatibility with metallic lithium electrodes.

25 ENERGY STORAGE↗
DOE OSTI2020

Activation Energy for End-of-Life Solder Bond Degradation: Thermal Cycling of Field-Aged PV Modules

The longevity of solar photovoltaic modules depends on the durability and reliability of their components, one of which is the solder bonds in interconnect ribbons. The solder joints experience stresses from thermal cycling and constant elevated temperatures (40 °C-70 °C) in regular field operation leading to thermo-mechanical fatigue and intermetallic compound formation. To study the end-of-life wear-out mechanisms and to obtain activation energy of solder bond degradation, here two field-aged modules from Arizona-a 21-year-old Solarex MSX60 module (with Sn62Pb36Ag2 at the solder joints) and an 18-year-old Siemens M55 module (with Sn60Pb40 at the solder joints)-underwent 800 and 400 modified thermal cycles, respectively. Using three heating blankets, each module had three temperature zones maintained at 85, 95, and 105 °C during the 15-min hot dwell time of the thermal cycle. Cell-level series resistance data obtained from three temperature zones enabled the calculation of activation energy for solder bond degradation for the MSX60 and the M55 modules to be 0.12 eV and 0.35 eV, respectively. From each temperature zone in both modules, busbar-solder samples were obtained, imaged through SEM, and analyzed with energy-dispersive X-ray spectroscopy. In the MSX60 module with traces of Ag in the solder material, phase segregation and growth were primarily observed at high temperatures. For M55 modules without Ag in the solder material, major phase segregation was observed in all temperature zones. The IMC thickness for both modules increased with increasing module temperature. The beneficial effect of Ag in solder material on mitigating solder bond degradation is presented.

14 SOLAR ENERGY↗
DOE OSTI2021

Heavily Tungsten–Doped Sodium Thioantimonate Solid–State Electrolytes with Exceptionally Low Activation Energy for Ionic Diffusion

A strategy for modifying the structure of solid-state electrolytes (SSEs) to reduce the cation diffusion activation energy is presented. Two heavily W-doped sodium thioantimonate SSEs, Na 2.895 W 0.3 Sb 0.7 S 4 and Na 2.7 W 0.3 Sb 0.7 S 4 are designed, both exhibiting exceptionally low activation energy and enhanced room temperature (RT) ionic conductivity; 0.09 eV, 24.2 mS/cm and 0.12 eV, 14.5 mS/cm. At –15 °C the Na 2.895 W 0.3 Sb 0.7 S 4 displays a total ionic conductivity of 5.5 mS/cm. Here, the 30 % W content goes far beyond the 10–12 % reported in the prior studies, and results in novel pseudo-cubic or orthorhombic structures. Calculations reveal that these properties result from a combination of multiple diffusion mechanisms, including vacancy defects, strongly correlated modes and excessive Na-ions. An all-solid-state battery (ASSB) using Na 2.895 W 0.3 Sb 0.7 S 4 as the primary SSE and a sodium sulfide (Na 2 S) cathode achieves a reversible capacity of 400 mAh g –1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Heavily Tungsten-Doped Sodium Thioantimonate Solid-State Electrolytes with Exceptionally Low Activation Energy for Ionic Diffusion

A strategy for modifying the structure of solid-state electrolytes (SSEs) to reduce the cation diffusion activation energy is presented. Two heavily W-doped sodium thioantimonate SSEs, Na 2.895 W 0.3 Sb 0.7 S 4 and Na 2.7 W 0.3 Sb 0.7 S 4 are designed, both exhibiting exceptionally low activation energy and enhanced room temperature (RT) ionic conductivity; 0.09 eV, 24.2 mS/cm and 0.12 eV, 14.5 mS/cm. At –15 °C the Na 2.895 W 0.3 Sb 0.7 S 4 displays a total ionic conductivity of 5.5 mS/cm. The 30 % W content goes far beyond the 10–12 % reported in the prior studies, and results in novel pseudo-cubic or orthorhombic structures. Here, calculations reveal that these properties result from a combination of multiple diffusion mechanisms, including vacancy defects, strongly correlated modes and excessive Na-ions. An all-solid-state battery (ASSB) using Na 2.895 W 0.3 Sb 0.7 S 4 as the primary SSE and a sodium sulfide (Na 2 S) cathode achieves a reversible capacity of 400 mAh g –1 .

sodium metal battery (SMB)↗
DOE OSTI2017

Apparent activation energy for hydrogen permeation and its relation to the composition of homogeneous PdAu alloy thin-film membranes

PdAu alloy composite membranes are often fabricated by sequential electroless plating of Pd and Au, but this forms a layered structure that must be annealed to form a homogenous alloy. Using ex situ analysis techniques such as X-ray diffraction (XRD) or energy dispersive X-ray spectroscopy (EDS) to judge the extent of homogenization can be time-consuming as the composite membranes must be cooled to ambient temperatures prior to analysis. However, an in situ alternative is to use the apparent activation energy for H 2 permeation (E act ). Here in this work, 27 – 41 wt% Au films were fabricated to expand upon a range of 0 – 21 wt% that has been previously reported. Homogenization (confirmed by XRD and EDS) was achieved by heat treatment in 3 MPa H 2 at 550 °C for up to 120 h. The apparent E act was found to initially decrease with increasing Au composition from 12.2 kJ mol -1 (pure Pd) to 7.5 kJ mol -1 (21 wt% Au) after which it slowly increased to 9.0 kJ mol -1 (41 wt% Au). The two distinct regimes can be explained using the relation E act = ΔH H + E D , wherein E act is the sum of the partial enthalpy of solution of H into the PdAu alloy (ΔH H ) and the activation energy for diffusion of H in the alloy (E D ). Essentially, the two components of E act have opposite signs that counteract each other and cause a non-linear trend with increasing Au compositions.

42 ENGINEERING↗
NASA NTRS1978

On the possibility of negative activation energies in bimolecular reactions

The temperature dependence of the rate constants for model reacting systems was studied to understand some recent experimental measurements which imply the existence of negative activation energies. A collision theory model and classical trajectory calculations are used to demonstrate that the reaction probability can vary inversely with collision energy for bimolecular reactions occurring on attractive potential energy surfaces. However, this is not a sufficient condition to ensure that the rate constant has a negative temperature dependence. On the basis of these calculations, it seems unlikely that a true bimolecular reaction between neutral molecules will have a negative activation energy.

Jaffe, R. L.↗
DOE OSTI2015

Effect of the Electric Double Layer on the Activation Energy of Ion Transport in Conical Nanopores

Measured apparent activation energies, $E_A$, of ion transport (K + and Cl – ) in conical glass nanopores are reported as a function of applied voltage (-0.5 to 0.5 V), pore size (20–2000 nm), and electrolyte concentration (0.1–50 mM). $E_A$ values for transport within an electrically charged conical glass nanopore differ from the bulk values due to the voltage and temperature-dependent distribution of the ions within the double layer. Remarkably, nanopores that display ion current rectification also display a large decrease in $E_A$ under accumulation mode conditions (at applied negative voltages versus an external ground) and a large increase in $E_A$ under depletion mode conditions (at positive voltages). Finite element simulations based on the Poisson–Nernst–Planck model semiquantitatively predict the measured temperature-dependent conductivity and dependence of $E_A$ on applied voltage. The results highlight the relationships between the distribution of ions with the nanopore, ionic current, and $E_A$ and their dependencies on pore size, temperature, ion concentration, and applied voltage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗