Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACCSYS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Linac Coherent Light Source II (LCLS-II) Conceptual Design Report

The LCLS-II Project is designed to support the DOE Office of Science mission, as described in the 22 April 2010 Mission Need Statement. The scope of the Project was chosen to provide an increase in capabilities and capacity for the facility both at project completion in 2017 and in the subsequent decade. The Project is designed to address all points of the Mission Need Statement (MNS): (1) Expanded spectral reach; (2) Capability to provide x-ray beams with controllable polarization; (3) Capability to provide 'pump' pulses over a vastly extended range of photon energies to a sample, synchronized to LCLS-II x-ray probe pulses with controllable inter-pulse time delay; and (4) Increase of user access through parallel rather than serial x-ray beam use within the constraint of a $300M-$400M Total Project Cost (TPC) range. The LCLS-II Project will construct: (1) A hard x-ray undulator source (2-13 keV); (2) A soft x-ray undulator source (250-2,000 eV); (3) A dedicated, independent electron source for these new undulators, using sectors 10-20 of the SLAC linac; (4) Modifications to existing SLAC facilities for the injector and new shielded enclosures for the undulator sources, beam dumps and x-ray front ends; (5) A new experiment hall capable of accommodating four experiment stations; and (6) Relocation of the two soft x-ray instruments in the existing Near Experiment Hall (NEH) to the new experiment hall (Experiment Hall-II). A key objective of LCLS-II is to maintain near-term international leadership in the study of matter on the fundamental atomic length scale and the associated ultrafast time scales of atomic motion and electronic transformation. Clearly, such studies promise scientific breakthroughs in key areas of societal needs like energy, environment, health and technology, and they are uniquely enabled by forefront X-ray Free Electron Laser (X-FEL) facilities. While the implementation of LCLS-II extends to about 2017, it is important to realize that LCLS-II only constitutes a stepping stone to what we believe is needed over a longer time scale. At present, a practical time horizon for planning is about 15 years into the future, matching that of worldwide planning activities for competitive X-FEL facilities in Europe and Asia. We therefore envision LCLS-II as an important stage in development to what is required by about 2025, tentatively called LCLS-2025, for continued US leadership even as new facilities around the world are being completed. We envision LCLS primarily as a hard x-ray FEL facility with some soft x-ray capabilities. A survey of planned X-FEL facilities around the world suggests that US planning to 2025 needs to include an internationally competitive soft x-ray FEL facility which complements the LCLS plans outlined in this document.

43 PARTICLE ACCELERATORS↗

Super B Progress Report: Detector

This report describes the present status of the detector design for Super B . It is one of four separate progress reports that, taken collectively, describe progress made on the Super B Project since the publication of the Super B Conceptual Design Report in 2007 and the Proceedings of Super B Workshop VI in Valencia in 2008.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Super B Progress Report for Accelerator

This report details the progress made in by the SuperB Project in the area of the Collider since the publication of the SuperB Conceptual Design Report in 2007 and the Proceedings of SuperB Workshop VI in Valencia in 2008.

43 PARTICLE ACCELERATORS↗

Measurement of Hadronic Event Shapes and Jet Substructure in Proton-Proton Collisions at 7.0 TeV Center-of-Mass Energy with the ATLAS Detector at the Large Hadron Collider

This thesis presents the first measurement of 6 hadronic event shapes in proton-proton collisions at a center-of-mass energy of $\sqrt{s}$ = 7 TeV using the ATLAS detector at the Large Hadron Collider. Results are presented at the particle-level, permitting comparisons to multiple Monte Carlo event generator tools. Numerous tools and techniques that enable detailed analysis of the hadronic final state at high luminosity are described. The approaches presented utilize the dual strengths of the ATLAS calorimeter and tracking systems to provide high resolution and robust measurements of the hadronic jets that constitute both a background and a signal throughout ATLAS physics analyses. The study of the hadronic final state is then extended to jet substructure, where the energy flow and topology within individual jets is studied at the detector level and techniques for estimating systematic uncertainties for such measurements are commissioned in the first data. These first substructure measurements in ATLAS include the jet mass and sub-jet multiplicity as well as those concerned with multi-body hadronic decays and color flow within jets. Finally, the first boosted hadronic object observed at the LHC - the decay of the top quark to a single jet - is presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Trajectory studies for SPEAR3 LTB

In this note, trajectory stability in SPEAR3 Linac-to-booster (LTB) transport line is studied. It is observed that an electron gun body temperature variation or a linac RF phase variation may introduce beam energy variation which then translates into a trajectory change after certain dipole magnets. Long time BPM resolution is also investigated, plus a calculation on the initial beam angle variation. Beam trajectory is controlled for a good injection efficiency into the booster, by using the measured response matrix of certain steering correctors. Dispersion is also measured for a future implementation of a beam energy feedback.

ACCPHY, ACCSYS↗

IMIGO: An Optimal Adaptive Nonlinear Program for Accelerator Optics Modeling and Other Applications

Model-based electron accelerator control is the maintenance of optimal parameters of an electron beam such as its orbit, size, and shape, as well as machine parameters such as tunes. It works well when the model reflects reality. SLAC pioneered this technique in SPEAR about thirty decades ago. Similar techniques are now employed in particle accelerator and synchrotron laboratories around the world. There is still an inherently complex problem related to the employment of such techniques to manage the operation and analysis of accelerators and storage rings. The problem arises from the use by those techniques of complex numerical algorithms commonly known as nonlinear solvers that are difficult to control and operate. Lessons learned at SLAC have led to the development of a new, simple-to-use, and iterative nonlinear solver that holds much promise not only in advancing the derivation of errors in accelerators and storage rings at SLAC, but also in its ability to tackle a range of complex engineering problems. A CRADA project was recently completed to build on this experience at SLAC, and to collaborate with an outside company GO AI Services to further develop and validate this nonlinear solver for robust SLAC accelerator. In this report, we present the project report submitted to DOE and SLAC.

Accelerators↗

A Proposed Global Optimum Algebraic Iterative Solver for Modeling of Lattice Element Errors

Model-based electron accelerator control is the maintenance of optimal parameters of an electron beam such as its orbit, size, and shape, as well as machine parameters such as tunes. It works well when the model reflects reality. SLAC pioneered this technique in SPEAR about thirty decades ago. Similar techniques are now employed in particle accelerator and synchrotron laboratories around the world. There is still an inherently complex problem related to the employment of such techniques to manage the operation and analysis of accelerators and storage rings. The problem arises from the use by those techniques of complex numerical algorithms commonly known as nonlinear solvers that are difficult to control and operate. Lessons learned at SLAC have led to the development of a new, simple-to-use, and iterative nonlinear solver that holds much promise not only in advancing the derivation of errors in accelerators and storage rings at SLAC, but also in its ability to tackle a range of complex engineering problems. We intend to further develop and validate this nonlinear solver for robust SLAC accelerator and other applications.

ACCSYS↗

Damping Ring Kickers

The principle of the design of these magnets was discussed in CN-72. Fig. 1 shows what the total system looks like. Such a system was completed last January and since then we have been evaluating its performance.

ACCSYS↗

Kicker Magnet and Pulser

The SLC Project utilizes several fast kicker magnets. Their requirements vary somewhat, however, the cooling rings kickers have the most stringent requirements. In this note we describe the design of the positron ring kickers, and the reasons that led to it.

ACCSYS↗

SLAC Laboratory Directed Research and Development Program: FY2014 Annual Report

The Department of Energy (DOE) and the SLAC National Accelerator Laboratory (SLAC) encourage innovation, creativity, originality and quality to maintain the Laboratory’s research activities and staff at the forefront of science and technology. To further advance the Laboratory’s scientific research capabilities, the Laboratory allocates a portion of its funds for the Laboratory Directed Research and Development (LDRD) program. With DOE guidance, the LDRD program enables SLAC scientists to make rapid and significant contributions to seeding new strategies for solving important national science and technology problems. The LDRD program is conducted using existing research facilities. The project proposals can be characterized as: Small-scale research and development activities or pilot projects; Bench-scale research projects; and Information gathering, computer modeling, conceptual design and feasibility studies. In addition to building new core competencies that support the DOE missions, the LDRD project proposals may also conduct scientific research and development that support the missions of other federal agencies and/or non-federal sponsors. In FY2014, SLAC continued to see some of the previously funded LDRD programs transition to follow on funding with the Office of Science, (including an Early Career Award), EERE and other agencies such as DARPA and NIH. This external validation shows that the projects selected were important to continuing forefront science and use-inspired applications with mission relevance and demonstrates they were delivering significant results. Annual reports for the FY14 project activities are included in this report.

25 ENERGY STORAGE↗

Overview of High Power Vacuum Dry RF Load Designs

A specific feature of RF linacs based on the pulsed traveling wave (TW) mode of operation is that only a portion of the RF energy is used for the beam acceleration. The residual RF energy has to be terminated into an RF load. Higher accelerating gradients require higher RF sources and RF loads, which can stably terminate the residual RF power. RF feeders (from the RF source though the accelerating section to the load) are vacuumed to transmit multi-megawatt high power RF. This overview will outline vacuumed RF loads only. A common method to terminate multi-MW RF power is to use circulated water (or other liquid) as an absorbing medium. A solid dielectric interface (a high quality ceramic) is required to separate vacuum and liquid RF absorber mediums. Using such RF load approaches in TW linacs is troubling because there is a fragile ceramic window barrier and a failure could become catastrophic for linac vacuum and RF systems. Traditional loads comprising of a ceramic disk have limited peak and average power handling capability and are therefore not suitable for high gradient TW linacs. This overview will focus on ''vacuum dry'' or ''all-metal'' loads that do not employ any dielectric interface between vacuum and absorber. The first prototype is an original design of RF loads for the Stanford Two-Mile Accelerator.

43 PARTICLE ACCELERATORS↗

Conceptual Design for CLIC Gun Pulser

The Compact Linear Collider (CLIC) is a proposed future electron-positron collider, designed to perform collisions at energies from 0.5 to 5 TeV, with a nominal design optimized for 3 TeV (Dannheim, 2012). The Drive Beam Accelerator consists of a thermionic DC gun, bunching section and an accelerating section. The thermionic gun needs deliver a long (~143us) pulse of current into the buncher. A pulser is needed to drive grid of the gun to generate a stable current output. This report explores the requirements of the gun pulser and potential solutions to regulate grid current.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Laboratory Directed Research and Development Program: FY 2015 Annual Report

The Department of Energy (DOE) and the SLAC National Accelerator Laboratory (SLAC) encourage innovation, creativity, originality and quality to maintain the Laboratory’s research activities and staff at the forefront of science and technology. To further advance its scientific research capabilities, the Laboratory allocates a portion of its funds for the Laboratory Directed Research and Development (LDRD) program. With DOE guidance, the LDRD program enables SLAC scientists to make rapid and significant contributions that seed new strategies for solving important national science and technology problems. The LDRD program is conducted using existing research facilities.

99 GENERAL AND MISCELLANEOUS↗

Cancellation of RF Coupler-Induced Emittance Due to Astigmatism

It is well-known that the electron beam quality required for applications such as FEL’s and ultra-fast electron diffraction can be degraded by the asymmetric fields introduced by the RF couplers of superconducting linacs. This effect is especially troublesome in the injector where the low energy beam from the gun is captured into the first high gradient accelerator section. Unfortunately modifying the established cavity design is expensive and time consuming, especially considering that only one or two sections are needed for an injector. Instead, it is important to analyze the coupler fields to understand their characteristics and help find less costly solutions for their cancellation and mitigation. This paper finds the RF coupler-induced emittance for short bunches is mostly due to the transverse spatial sloping or tilt of the field, rather than the field’s time-dependence. It is shown that the distorting effects of the coupler can be canceled with a static (DC) quadrupole lens rotated about the z-axis.

43 PARTICLE ACCELERATORS↗

Sources of Emittance in RF Photocathode Injectors

Advances in electron beam technology have been central to creating the current generation of x-ray free electron lasers and ultra-fast electron microscopes. These once exotic devices have become essential tools for basic research and applied science. One important beam technology for both is the electron source which, for many of these instruments, is the photocathode RF gun. The invention of the photocathode gun and the concepts of emittance compensation and beam matching in the presence of space charge and RF forces have made these high-quality beams possible. Achieving even brighter beams requires a taking a finer resolution view of the electron dynamics near the cathode during photoemission and the initial acceleration of the beam. In addition, the high brightness beam is more sensitive to degradation by the optical aberrations of the gun’s RF and magnetic lenses. This paper discusses these topics including the beam properties due to fundamental photoemission physics, space charge effects close to the cathode, and optical distortions introduced by the RF and solenoid fields. Analytic relations for these phenomena are derived and compared with numerical simulations.

43 PARTICLE ACCELERATORS↗

Conceptual Design for the New RPI 2020 Linac

The Rensselaer Polytechnic Institute (RPI) spectrometer is an installation based on an L-band linear accelerator designed and installed many decades ago. While this installation has served many important experiments over the decades, a new more powerful and more flexible linac to serve a wider range of experiments is envisioned as an upgrade to the existing installation by 2020.

47 OTHER INSTRUMENTATION↗