Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “3D seismic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

New Support for Hypotheses of an Ancient Ocean on Mars

A new analog for the giant polygons in the Chryse-Acidalia area suggests that those features may have formed in a major body of water - likely a Late Hesperian to Early Amazonian ocean. This analog -terrestrial polygons in subsea, passive margin basins derives from 3D seismic data that show similar-scale, polygonal fault systems in the subsurface of more than 50 terrestrial offshore basins. The terrestrial and martian polygons share similar sizes, basin-wide distributions, tectonic settings, and association with expected fine-grained sediments. Late Hesperian deposition from outflow floods may have triggered formation of these polygons, by providing thick, rapidly-deposited, fine-grained sediments necessary for polygonal fracturing. The restriction of densely occurring polygons to elevations below approx. -4000 m to -4100 m supports inferences that a body of water controlled their formation. Those same elevations appear to restrict occurrence of polygons in Utopia Planitia, suggesting that this analog may apply also to Utopia and that similar processes may have occurred across the martian lowlands.

Oehler, Dorothy Z.↗

Differential Muon Tomography to Continuously Monitor Changes in the Composition of Subsurface Fluids

Muon tomography has been used to seek hidden chambers in Egyptian pyramids and image subsurface features in volcanoes. It seemed likely that it could be used to image injected, supercritical carbon dioxide as it is emplaced in porous geological structures being used for carbon sequestration, and also to check on subsequent leakage. It should work equally well in any other application where there are two fluids of different densities, such as water and oil, or carbon dioxide and heavy oil in oil reservoirs. Continuous monitoring of movement of oil and/or flood fluid during enhanced oil recovery activities for managing injection is important for economic reasons. Checking on leakage for geological carbon storage is essential both for safety and for economic purposes. Current technology (for example, repeat 3D seismic surveys) is expensive and episodic. Muons are generated by high- energy cosmic rays resulting from supernova explosions, and interact with gas molecules in the atmosphere. This innovation has produced a theoretical model of muon attenuation in the thickness of rock above and within a typical sandstone reservoir at a depth of between 1.00 and 1.25 km. Because this first simulation was focused on carbon sequestration, the innovators chose depths sufficient for the pressure there to ensure that the carbon dioxide would be supercritical. This innovation demonstrates for the first time the feasibility of using the natural cosmic-ray muon flux to generate continuous tomographic images of carbon dioxide in a storage site. The muon flux is attenuated to an extent dependent on, amongst other things, the density of the materials through which it passes. The density of supercritical carbon dioxide is only three quarters that of the brine in the reservoir that it displaces. The first realistic simulations indicate that changes as small as 0.4% in the storage site bulk density could be detected (equivalent to 7% of the porosity, in this specific case). The initial muon flux is effectively constant at the surface of the Earth. Sensitivity of the method would be decreased with increasing depth. However, sensitivity can be improved by emplacing a greater array of particle detectors at the base of the reservoir.

Coleman, Max↗

Martian Oceans: Old Debate - New Insights

The possibility of an ancient ocean in the northern lowlands of Mars has been discussed for decades [1-14], but the subject remains controversial [15-20]. Among the many unique features of the northern lowlands is the extensive development of "giant polygons" - polygonal landforms that range from 1 to 20 km across. The kilometer-scale size of these features distinguishes them from a variety of smaller polygons (usually < 250 m) on Mars that have been compared to terrestrial analogs such as ice-wedge and desiccation features. However, until recently, geologists were aware of no examples of polygons on Earth comparable in scale to the giant polygons of Mars, so there were no good analogs from which to draw interpretations. That picture has changed with 3D seismic data acquired by the petroleum industry in exploration of offshore basins. The new data reveal kilometer-scale polygonal features in more than 50 offshore basins on Earth]. These features provide a credible analog for the giant polygons of Mars.

Oehler, Dorothy Z.↗

Mars Habitability, Biosignature Preservation, and Mission Support

Our work has elucidated a new analog for the formation of giant polygons on Mars, involving fluid expulsion in a subaqueous environment. That work is based on three-dimensional (3D) seismic data on Earth that illustrate the mud volcanoes and giant polygons that result from sediment compaction in offshore settings. The description of this process has been published in the journal Icarus, where it will be part of a special volume on Martian analogs. These ideas have been carried further to suggest that giant polygons in the Martian lowlands may be the signature of an ancient ocean and, as such, could mark a region of enhanced habitability. A paper describing this hypothesis has been published in the journal Astrobiology.

Oehler, Dorothy Z.↗

Multi-Scale Seismic Measurements for Site Characterization and CO2 Monitoring in an Enhanced Oil Recovery/Carbon Capture, Utilization, and Sequestration Project, Farnsworth Field, Texas

To address the challenges of climate change, significantly more geologic carbon sequestration projects are beginning. The characterization of the subsurface and the migration of the plume of supercritical carbon dioxide are two elements of carbon sequestration that can be addressed through the use of the available seismic methods in the oil and gas industry. In an enhanced oil recovery site in Farnsworth, TX, we employed three separate seismic techniques. The three-dimensional (3D) surface seismic survey required significant planning, design, and processing, but produces both a better understanding of the subsurface structure and a three-dimensional velocity model, which is essential for the second technique, a timelapse vertical seismic profile, and the third technique, cross-well seismic tomography. The timelapse 3D Vertical Seismic Profile (3D VSP) revealed both significant changes in the reservoir between the second and third surveys and geo-bodies that may represent the extent of the underground carbon dioxide. The asymmetry of the primary geo-body may indicate the preferential migration of the carbon dioxide. The third technique, cross-well seismic tomography, suggested a strong correlation between the well logs and the tomographic velocities, but did not observe changes in the injection interval.

Energy & Fuels↗

Analysis of Seismic Wave Amplification in Sedimentary Basins Using 3D Wavefield Simulations: Nenana Basin, Central Alaska

We investigate seismic wave amplification in Nenana basin, central Alaska, using 3D seismic wavefield simulations. We quantify frequency-dependent amplification by comparing synthetic seismograms among four different seismic velocity models: (a) a tomographic model, (b) a tomographic model with the uppermost 6.5 km replaced by a 1D basin profile, (c) a tomographic model with an embedded ellipsoidal basin, and (d) a tomographic model with an embedded realistic basin. For each model we perform wavefield simulations accurate up to 2 Hz for a set of 10 different earthquakes, which provide a range of frequencies and incident angles for waves interacting with the basin. Average amplification ratios are four on the horizontal components and seven on the vertical component. The dominant influence of the amplification is the 3D geometry of the basin, not the slow-velocity profile near the surface. Our synthetic amplification ratios are in general agreement with amplification estimates obtained from 14 stations that recorded the same set of earthquakes. Our approach offers a general strategy for documenting frequency-dependent basin amplification for a region with realistic basin structures and local earthquakes.

Geosciences↗

Seismic Monitoring at the Farnsworth CO2-EOR Field Using Time-Lapse Elastic-Waveform Inversion of 3D-3C VSP Data

During the Development Phase of the U.S. Southwest Regional Partnership on Carbon Sequestration, supercritical CO2 was continuously injected into the deep oil-bearing Morrow B formation of the Farnsworth Unit in Texas for Enhanced Oil Recovery (EOR). The project injected approximately 94 kilotons of CO2 to study geologic carbon storage during CO2-EOR. A three-dimensional (3D) surface seismic dataset was acquired in 2013 to characterize the subsurface structures of the Farnsworth site. Following this data acquisition, the baseline and three time-lapse three-dimensional three-component (3D-3C) vertical seismic profiling (VSP) data were acquired at a narrower surface area surrounding the CO2 injection and oil/gas production wells between 2014 and 2017 for monitoring CO2 injection and migration. With these VSP datasets, we inverted for subsurface velocity models to quantitatively monitor the CO2 plume within the Morrow B formation. We first built 1D initial P-wave (Vp) and S-wave (Vs) velocity models by upscaling the sonic logs. We improved the deep region of the Vp and Vs models by incorporating the deep part of a migration velocity model derived from the 3D surface seismic data. We improved the shallow region of 3D Vp and Vs models using 3D traveltime tomography of first arrivals of VSP downgoing waves. We further improved the 3D baseline velocity models using elastic-waveform inversion (EWI) of the 3D baseline VSP upgoing data. Our advanced EWI method employs alternative tomographic and conventional gradients and total-variation-based regularization to ensure the high-fidelity updates of the 3D baseline Vp and Vs models. We then sequentially applied our 3D EWI method to the three time-lapse datasets to invert for spatiotemporal changes of Vp and Vs in the reservoir. Our inversion results reveal the volumetric changes of the time-lapse Vp and Vs models and show the evolution of the CO2 plume from the CO2 injection well to the oil/gas production wells.

42 ENGINEERING↗

Linear Seismic Source Equivalents in 3D Nonlinear Models: Effects of Embedded Small-Scale, Near-Source Structures

Gaining a proper understanding of how Earth structure and other near-source properties affect estimates of explosion yield is important to the nonproliferation mission. The yields of explosion sources are often based on seismic moment or waveform amplitudes. Quantifying how the seismic waveforms or estimates of the source characteristics derived from those waveforms are influenced by natural or man-made structures within the near-source region, where the wavefield behaves nonlinearly, is required to understand the full range of uncertainty in those yield estimates. We simulate tamped chemical explosions using a nonlinear, shock physics code and couple the ground motions beyond the elastic radius to a linear elastic, full waveform seismic simulation algorithm through 3D media. In order to isolate the effects of simple small-scale 3D structures on the seismic wavefield and linear seismic source estimates, we embed spheres and cylinders close to the fully- tamped source location within an otherwise homogenous half-space. The 3 m diameters spheres, given their small size compared to the predominate wavelengths investigated, not surprisingly are virtually invisible with only negligible perturbations to the far-field waveforms and resultant seismic source time functions. Similarly, the 11 m diameter basalt sphere has a larger, but still relatively minor impact on the wavefield. However, the 11 m diameter air-filled sphere has the largest impact on both waveforms and the estimated seismic moment of any of the investigated cases with a reduction of ~25% compared to the tamped moment. This significant reduction is likely due in large part to the cavity collapsing from the shock instead of being solely due to diffraction effects . Although the cylinders have the same diameters as the 3 m spheres, their length of interaction with the wavefield produces noticeable changes to the seismic waveforms and estimated source terms with reductions in the peak seismic moment on the order of 10%. Both the cylinders and 11 m diameter spheres generate strong shear waves that appear to emanate from body force sources.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

3D Deep Learning Joint Inversion of Active Seismic Full Waveform and Passive Seismic Traveltime Data for Reservoir Imaging and Uncertainty Quantification

Here, we present deep learning (DL) networks for three-dimensional (3D) joint inversion of active seismic full waveform and passive seismic traveltime data to image reservoirs and their properties and quantify imaging uncertainties. Active seismic full-waveform data can provide high-resolution monitoring images but are collected only intermittently because of their high acquisition cost. In contrast, passive seismic data can be gathered at relatively low cost between regular active surveys, although their imaging quality can be compromised by factors such as low signal-to-noise ratios and limited ray coverage of the target. Although these datasets are routinely acquired together at CO 2 storage sites, their combined inversion within a 3D DL framework has not been previously demonstrated. To our knowledge, this is the first study to address this gap, combining the strength of both data types. For efficient data storage and DL training with large 3D seismic datasets, we use a 3D data matrix in which a random number of passive seismic traveltime data are stored as parabolic envelopes using one-hot encoding and a 3D full-waveform data matrix in which multiple shot gathers are summed. Two network architectures are evaluated: a single-encoder U-Net for single-data type inversion and a dual-encoder U-Net for joint inversion of active and passive seismic data. We also evaluate the single-encoder U-Net for joint inversion by concatenating full-waveform data and traveltime data. We propose a systematic approach for selecting an optimal dropout rate that balances regularization during training and Monte Carlo dropout-based uncertainty quantification during prediction by examining the correlation coefficient between standard deviation and prediction error, along with the training misfit, across a range of dropout rates. 3D DL inversion experiments include five different network configurations, with evaluations under ideal, noisy and dropout-enabled conditions. Both model and data uncertainties are assessed, as well as their combined effects. Across all conditions, the networks consistently predict accurate CO 2 saturation models with low prediction errors, such as a structural similarity index of 0.993 and CO 2 difference of 1.1%. Uncertainty estimates show strong spatial correlation with prediction errors, confirming the effectiveness of the proposed dropout selection approach. The results demonstrate that our DL approach, utilizing compact data representations and appropriate uncertainty quantification, yields accurate subsurface images under various inversion conditions and provides valuable insights into the reliability of predictions.

Um, Evan Schankee [Lawrence Berkeley National Labo↗

Full Waveform Inversion Tomography for Improved Seismic Waveform Simulations and Lithospheric Structure of Northwest China and Surrounding Regions

We report a new model of three-dimensional (3D) anisotropic seismic wavespeed structure of the lithospheric of northwestern China, western Mongolia and east }|ern Kazakhstan from full waveform inversion tomography using openly available broadband data. To investigate the efficacy of a conservative multiscale inversion methodology, we used a simple isotropic starting model.

58 GEOSCIENCES↗

Utah FORGE: Seismic DAS and Geophone Borehole Data Processing and 3D Imaging of Vp/Vs Ratio in the 2024 Stimulated Reservoir

This dataset includes a final report and a 3D velocity model derived from seismic DAS and geophone borehole data collected during the April 2024 stimulation of the reservoir at Utah FORGE. The report details the processing of over 50,000 P- and S-wave travel times used in a tomographic inversion to estimate the Vp/Vs ratio, revealing anomalies adjacent to wells 16A and 16B that may be associated with injected fracturing fluids. Additionally, Wadati analysis of more than 27,000 pairs of differential P- and S-wave travel times supports this interpretation with a high Vp/Vs estimate of 1.86, averaged over the dimensions of the earthquake cluster. The accompanying data file provides a 3D model of P- and S-wave velocities and Vp/Vs ratios, structured with spatial coordinates and velocity values.

15 GEOTHERMAL ENERGY↗

Hydrate-bearing sands in the Terrebonne Basin record the transition from ponded deposition to bypass in the deep-water Gulf of Mexico

Here, we integrated well and seismic data to interpret the stratigraphic architecture and the paleogeographic evolution of two hydrate-bearing sand reservoirs in the Terrebonne Basin in the deep-water Gulf of Mexico. These sands were deposited during the final stage of ponded fill within the Terrebonne Basin. The Green sand filled the final accommodation in the basin as a perched apron; it was formed coincidentally with downstream erosion and sediment bypass which cut through a canyon formed on the southeastern edge of the basin. Subsequently, a low energy turbidite channel continued to bypass sediment through the basin and aggrade. The Orange sand was then deposited as a second perched apron and it was once again incised by the low energy turbidite channel. The Green and Orange sands are regional sheet sands that extend and thicken deep into the Terrebonne Basin. They provide a connected regional aquifer that captured and focused gas migration to the crest of the structure where hydrate was formed. These sands were formed by large, unconfined, turbidity flows. We envision that they will be composed of coarser grained deposits relative to previously explored hydrate reservoirs within levee deposits. As such, they have the potential to be relatively coarse grained and hence have higher permeability: a condition favorable to production of hydrate deposits.

3D seismic interpretation↗

Machine learning-based inversion for acoustic impedance with large synthetic training data: Workflow and data characterization

Where wells are sparse or training data are difficult to label with high-quality wireline-derived impedance logs, machine learning (ML)-based inversion of acoustic impedance typically depends on small training data sets, leading to biased prediction. We have advanced a novel workflow that applies large synthetic seismic training data to reduce facies-related bias. Using a geologically realistic model as the truth model, we randomly select sparse seed wells to perform sequential Gaussian simulation (SGS) for impedance models of the same geometry and simulate facies variability. We implement random forest regression on 30 features extracted from the synthetic volume. We observe that more seed wells tend to reduce facies-induced bias by sampling more types of facies, resulting in a better prediction. We then focus on the responses of SGS models to facies changes, the number of seed wells necessary for a useful synthetic model, and how much a synthetic model can help ML-based inversion. Here, we observe that the SGS synthetic training model outperforms well-direct training in general. For modeled clastic shore-zone systems in Miocene Gulf of Mexico, two or more seed wells are necessary for a significant reduction of root-mean-square error and outliners, and improvement of facies imaging. In a field-data test, we apply a similar workflow to quantitatively predict acoustic impedance, which is then converted to a sand-volume map at a high-frequency sequence (10–100 m), revealing detailed facies and sandstone patterns. Such results are valuable in many geologic and engineering applications, such as hydrocarbon and CO 2 reservoir prospecting, reserve estimation, simulation, etc.

3D seismic↗

Improved Earthquake Source Parameters with 3D Wavespeed Models in California and Nevada

Seismic tomography harnesses earthquake data to explore the inaccessible structure of the Earth. Adjoint waveform tomography (AWT), a method of seismic tomography, updates the tomographic model by optimizing the fit between observed earthquake data and synthetic waveforms. The synthetic data are calculated by solving the wave equation through a given 3D model. An important requirement to calculating synthetics is the source information (location, centroid time, depth, and moment tensor). Errors in source information affect the quality of the synthetics produced, which in turn can limit how structure can be inferred in the AWT workflow. Here, to test the effect of updating source information, we used MTTime (Chiang, 2020), a time-domain full-waveform moment tensor inversion code, to calculate the moment tensors and depths of 118 earthquakes that occurred in California and Nevada over a 20-yr period. We calculated 3D Green’s functions using a 3D seismic wavespeed model of California and Nevada (Doody et al., 2023b). We show that the inverted solutions provide better waveform fits than the Global Centroid Moment Tensor catalog and increase usable, well-correlated data by up to 7%. Therefore, we argue that recalculating source parameters should be considered in AWT workflows, particularly for smaller magnitude events (⁠M w > 5.0).

58 GEOSCIENCES↗

Quantifying the effect of 3D models on moment tensor results using synthetic data

Moment tensors provide vital information on seismic source properties for seismic events. Moment tensors require seismic wavespeed models to compute Green’s functions, which measure the impulse response between a given source and receiver. Traditionally, researchers have used one-dimensional velocity models to calculate Green’s functions since 1D Green’s functions are computationally cheap to compute. Local 1D velocity models can also accurately model waveforms at short distances (< 500 km). However, 1D velocity models do not account for lateral heterogeneity, which can cause significant misfit in tectonically complex regions such as the Middle East (Covellone and Savage, 2012). Green’s functions calculated using 3D seismic wavespeed models have been shown to perform better in tectonically complex regions (Covellone and Savage, 2012; Kintner and Modrak, 2022), so we are interested in quantifying the effect of considering 3D structure on moment tensor inversion results. The Middle East is an ideal study area for a synthetic moment tensor test for two reasons. Firstly, the Middle East is a tectonically complex region that has been heavily studied. Secondly, the Middle East has significant seismic activity throughout the region, but imperfect station coverage due to limited open data through large swaths of the domain. The tectonic complexity and uneven station coverage will test real-world performance even in a synthetic experiment.

58 GEOSCIENCES↗

Deep Learning for Full Waveform Inversion of Elastic Active-Source Seismic Data to Estimate P-Wave Velocity Models

Seismic imaging methods are critical for Global Security and Energy & Homeland Security missions and activities that rely on subsurface characterization, but traditional methods remain computationally expensive and require significant labor hours and expertise to execute. Within the past few years, machine learning (ML), namely deep learning (DL), has been used to develop data-driven end-to-end full waveform inversion (FWI) methods to estimate 2D P-wave velocity (Vp) models in a fraction of the time as conventional FWI. These methods, however, are trained on simplistic acoustic wave seismic data and Vp models that are not realistic nor representative of real-world observations, leaving a large gap between the state-of-the-art and deployable, feasible, and practical DL FWI methods. Here, we generate a synthetic active-source, 3D, elastic wave seismic data set and a variety of Vp models with realistic geologic structure for training DL FWI methods. We evaluate six different methods that have performed well for acoustic DL FWI or medical imaging tasks using our more realistic dataset. We find that these six trained models do not match the performance of published acoustic end-to-end DL FWI methods, indicating more training data may be needed, physics may need to be incorporated to achieve good accuracy at the sacrifice of the end-to-end advantage, and/or novel methods need to be developed to enable end-to-end DL FWI methods to perform well for real-world seismic data.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Seismic H2: Version 1.0

Seismic-H2 is an integrated software package for geological hydrogen reservoir simulation, optimization, and leakage monitoring. The package includes multiple components: (1) code used for modeling seismic wave propagation in 3D heterogeneous elastic media based on finite-difference method to support detection of geological hydrogen storage reservoir leakage; (2) 3D reservoir simulations of leaks from an underground reservoir and 3D simulations of saline aquifers and depleted gas reservoirs; (3) seismic monitoring costs of passive and active seismic monitoring required for UHS; (4) rock physics calculations and interpolations for converting the reservoir simulations from part (2) into the elastic media models in part (1); (5) pre-processing seismic data; and lastly (6), a GUI interface that combines these different components.

Creasy, Neala↗