Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wetting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Dissolving Nonionic Surfactants in CO 2 to Improve Oil Recovery in Unconventional Reservoirs via Wettability Alteration

CO 2 injection is a promising method for enhanced oil recovery (EOR) in unconventional shale reservoirs. Here, in this work, we postulate that CO 2 EOR may be improved by the dissolution of surfactants into CO 2 . Although CO 2 is a relatively good solvent for oil, we show that CO 2 and Eagle Ford oil are immiscible at compositions above 70 wt % CO 2 , even at pressures as high as 62 MPa. The presence of a CO 2 –oil interface at reservoir conditions indicates that the addition of a surfactant has the potential to improve oil recovery–via wettability alteration from oil-wet to CO 2 -wet, CO 2 –oil interfacial tension (IFT) reduction, or both. Three nonionic surfactants (branched tridecyl ethoxylate Indorama SURFONIC TDA-9, branched nonylphenol ethoxylate Indorama SURFONIC N-100, and linear dodecyl ethoxylate Indorama SURFONIC L12-6) were evaluated for CO 2 -solubility, shale wettability alteration, effect on CO 2 –oil IFT, ability to generate CO 2 –oil foams, and ability to increase oil extraction from Eagle Ford, Mancos, and Bakken shale cores. Each surfactant dissolved in CO 2 up to 1 wt % at pressures and temperatures commensurate with CO 2 EOR. CO 2 -dissolved surfactants did not significantly affect CO 2 –oil IFT or generate CO2–oil foams, but they did induce a dramatic change in the contact angle of an oil droplet on an oil-aged shale chip in CO 2 from strongly oil-wet (11°) toward intermediate CO 2 –oil wettability (82°) (at 80 °C, 27.6 MPa). The branched tridecyl ethoxylated surfactant, SURFONIC TDA-9, afforded the highest oil recovery in core soaking experiments–75%, compared to 71% by pure CO 2 . Analysis of oil extracts by gas chromatography revealed that heavier oil components were produced when the surfactant was added to CO 2 . These results indicate that CO 2 -dissolved surfactants may increase oil recovery from shale by wettability alteration from oil-wet toward CO 2 -wet.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2021

The Mechanism of Increasing Summer Water Vapor Over the Tibetan Plateau

Rapid warming over the Tibetan Plateau (TP) has been associated with a wetting trend in atmospheric water vapor content, which is critical for recharging the Asian water tower. However, the mechanism associated with the wetting phenomenon remains unclear. Long-term changes in moisture balance and precipitation recycling processes are investigated using the ERA5 reanalysis from 1979 to 2019. The wetting trend over TP is mainly due to the summer water vapor trend with signi?cantly increases over the western TP. Based on the moisture balance analysis, it is found that precipitation, evaporation, and the convergence of moisture are all increasing over the western TP but decreasing over the eastern TP. Based on the dynamical precipitation recycling model, the results suggest that both internal and external cycles contributes to the wetting over TP, with 63.87% and 36.13% contributions respectively. Further analysis found that the atmospheric heating source is also increasing over the western TP, which could shift the moisture transportation from east to west at the southern boundary of TP. The increasing moisture convergence could enhance precipitation, and the enhanced latent heating in the mid-atmosphere can further induced moisture convergence, which forms a positive feedback. However, an opposite situation occurred over the eastern TP. The internal and external cycle of the recycling process can stimulate (suppress) each other through precipitation over the western (eastern) TP. This mechanism linked the changes in the precipitation recycling and atmospheric circulation, and induced the wetting trend over TP in summer.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A Distinct Atmospheric Mode for California Precipitation

The hydrologic cycle in California is strongly influenced by wet-season (November–April) precipitation. Here, we demonstrate the existence of an influential mode of North Pacific atmospheric pressure variability that regulates wet-season precipitation variability over both northern and southern California. This mode, named as the “California precipitation mode” (CPM), is statistically distinct from other well-known modes of pressure variability such as the Pacific-North American pattern. In addition to controlling wet-season mean precipitation, positive days of the CPM coincide with up to 90% of the extreme (>99th percentile) precipitation days and 76% of detected atmospheric rivers (ARs) days, while the negative days correspond with 60% of the dry days. CMIP6 models capture the CPM remarkably well, including its statistical separation from the other well-known modes of pressure variability. The models also reproduce the CPM's strong association with California wet-season precipitation, giving confidence in the models’ dynamics relating to regional hydrologic extremes. However, the models also exhibit biases in regional hydrologic extremes. The CPM is a useful way to understand the origins of those biases and select the more credible models for further analysis: Models with unrealistically strong gradients in the CPM pressure pattern generally oversimulate larger wet extremes and produce excessively long dry intervals in the historical period. Thus the hydrologic biases can be traced to the particular aspects of North Pacific atmospheric dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Two-Phase Fluid Flow Properties of Rough Fractures With Heterogeneous Wettability: Analysis With Lattice Boltzmann Simulations

Fractures are conduits for fluid flow in low-permeability geological formations. Multiphase flow properties of fractures are important in natural processes and in engineering applications such as the evaluation of the sealing capacity of caprocks and productivity of hydrocarbon-bearing tight rocks. Investigations of flow and transport through fractures typically focus on the effects of fracture geometric and mechanical factors such as aperture, roughness, and compressibility. The wettability of the fracture surfaces and its influence on microscale interfacial phenomena and macroscale effective transport properties are seldom studied. In this study, we investigated the effect of heterogeneous wetting properties on the displacement of water by supercritical CO2 through a series of lattice Boltzmann method simulations. The results show the evolution of the CO2 plume within a fracture is controlled by both the roughness of the aperture field and the wetting distribution. We combined these factors into a capillary pressure map that can be related to the macroscopic flow behavior of the fracture. We observed that heterogeneous wetting distributions promote the residual trapping of water where lower capillary pressures allowed for isolated water pockets in higher capillary pressure zones. Analysis of fracture unsteady relative permeability shows the effect of wetting on permeability evolution and provides support for the viscous-coupling relative permeability model. Finally, analysis of the steady-state relative permeability and saturation demonstrates a strong correlation between permeability and the standard deviation of the capillary pressure field. Thus, characterizing the distribution of wetting properties of fractures is crucial to understanding multiphase fracture flow and transport properties.

58 GEOSCIENCES↗
DOE OSTI2022

A Dynamic Pore Network Model for Imbibition Simulation Considering Corner Film Flow

Wetting films can develop in the corners of angular pores under strong wetting conditions. Modeling the dynamics of corner film remains elusive using direct numerical simulations because of the significant scale difference between main meniscus and corner film flow. In this paper, the modified interacting capillary bundle model (ICB), developed in our previous work to describe accurately corner film dynamics in a single square tube, is incorporated into a single-pressure dynamic pore network model (DPNM) to simulate imbibition in strongly wetting porous media with corner film flow. The traditional pore network is decomposed into several layers of interacting subpore networks where the 0th layer of subpore network simulates the main meniscus flow and higher layers the corner film flow. The fluid flow between different layers is captured by interlayer throats. In addition, the snap-off mechanism caused by the thickening of wetting corner film is considered. The accuracy of the developed model is validated for four cases: spontaneous imbibition in a single square tube, wetting fluid redistribution through corner films under a capillary pressure difference, snap off in a narrow throat connecting two large pores, and imbibition dynamics in a real microfluidic porous geometry. The validated model is then used to simulate both spontaneous and controlled imbibition in a pore network with random pore size distribution. Finally, the interaction between corner film and main meniscus flow in porous media is analyzed from a pore-scale perspective.

58 GEOSCIENCES↗
DOE OSTI2023

Antecedent Hydrometeorological Conditions of Wildfire Occurrence in the Western U.S. in a Changing Climate

Abstract Wildfires have significant hydrological and ecological impacts in the western U.S. Using a high‐resolution regional climate simulation and wildfire observations for 1984–2018, this study investigates the antecedent hydrometeorological conditions (AHCs) of wildfires in the western U.S. During the warm season (April‐September), the wildfire AHCs feature diverse surface pressure (PS), soil moisture, and longwave/shortwave radiation (LW/SW) conditions. K‐means clustering classifies wildfires into four types with distinct AHCs: low‐PS‐type and high‐PS‐type with lower and higher PS anomalies, respectively, LW‐type featuring intense LW but weak SW anomalies, and wet‐soil‐type with wet soil anomalies. Each fire cluster represents 22%–27% of all the wildfires, featuring different combinations of climate and vegetation conditions and their diverse relations to regional hydrometeorological conditions, with wet‐soil‐type fires often exhibiting opposite correlations with AHCs compared to those of the other three types. In five major Köppen climate zones over the western U.S., clustering‐based predictions improve the seasonal wildfire prediction accuracy ( R 2 ) by 10% compared to prediction without classification. Such improvement comes from separating the opposite relationships between wet‐soil‐type fires and their seasonal AHCs from the other three types, along with separating LW‐type fires, which include most of the lightning‐ignited fires that occur more randomly. Increases in wildfire occurrence during 1984–2018 are dominated by the increases in the LW‐type fires, while the wet‐soil‐type fires have decreased, consistent with the long‐term drying in the western U.S.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Taxon-specific microbial growth and mortality patterns reveal distinct temporal population responses to rewetting in a California grassland soil

Abstract Microbial activity increases after rewetting dry soil, resulting in a pulse of carbon mineralization and nutrient availability. The biogeochemical responses to wet-up are reasonably well understood and known to be microbially mediated. Yet, the population level dynamics, and the resulting changes in microbial community patterns, are not well understood as ecological phenomena. Here, we used sequencing of 16S rRNA genes coupled with heavy water (H218O) DNA quantitative stable isotope probing to estimate population-specific rates of growth and mortality in response to a simulated wet-up event in a California annual grassland soil. Bacterial growth and mortality responded rapidly to wet-up, within 3 h, and continued throughout the 168 h incubation, with patterns of sequential growth observed at the phylum level. Of the 37 phyla detected in the prewet community, growth was found in 18 phyla while mortality was measured in 26 phyla. Rapid growth and mortality rates were measurable within 3 h of wet-up but had contrasting characteristics; growth at 3 h was dominated by select taxa within the Proteobacteria and Firmicutes, whereas mortality was taxonomically widespread. Furthermore, across the community, mortality exhibited density-independence, consistent with the indiscriminate shock resulting from dry-down and wet-up, whereas growth was density-dependent, consistent with control by competition or predation. Total aggregated growth across the community was highly correlated with total soil CO2 production. Together, these results illustrate how previously “invisible” population responses can translate quantitatively to emergent observations of ecosystem-scale biogeochemistry.

58 GEOSCIENCES↗
DOE OSTI2023

Response patterns of simulated corn yield and soil nitrous oxide emission to precipitation change

Abstract Background Precipitation plays an important role in crop production and soil greenhouse gas emissions. However, how crop yield and soil nitrous oxide (N 2 O) emission respond to precipitation change, particularly with different background precipitations (dry, normal, and wet years), has not been well investigated. In this study, we examined the impacts of precipitation changes on corn yield and soil N 2 O emission using a long-term (1981–2020, 40 years) climate dataset as well as seven manipulated precipitation treatments with different background precipitations using the DeNitrification-DeComposition (DNDC) model. Results Results showed large variations of corn yield and precipitation but small variation of soil N 2 O emission among 40 years. Both corn yield and soil N 2 O emission showed near linear relationships with precipitation based on the long-term precipitation data, but with different response patters of corn yield and soil N 2 O emission to precipitation manipulations. Corn yield showed a positive linear response to precipitation manipulations in the dry year, but no response to increases in precipitation in the normal year, and a trend of decrease in the wet year. The extreme drought treatments reduced corn yield sharply in both normal and wet years. In contrast, soil N 2 O emission mostly responded linearly to precipitation manipulations. Decreases in precipitation in the dry year reduced more soil N 2 O emission than those in the normal and wet years, while increases in precipitation increased more soil N 2 O emission in the normal and wet years than in the dry year. Conclusions This study revealed different response patterns of corn yield and soil N 2 O emission to precipitation and highlights that mitigation strategy for soil N 2 O emission reduction should consider different background climate conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Fluid – Fluid Interfacial Area and Its Impact on Relative Permeability - A Pore Network Modeling Study

Abstract Relative permeability (kr) is commonly modeled as an empirical function of phase saturation. Although current empirical models can provide a good match of one or two measured relative permeabilities using saturation alone, they are unable to predict relative permeabilities well when there is hysteresis or when physical properties such as wettability change. Further, current models often result in relative permeability discontinuities that can cause convergence and accuracy problems in simulation. To overcome these problems, recent research has modeled relative permeability as a state function of both saturation (S) and phase connectivity (X). Pore network modeling (PNM) data, however, shows small differences in relative permeability for the same S-X value when approached from a different flow direction. This paper examines the impact of one additional Minkowski parameter (Mecke and Arns, 2005), the fluid-fluid interfacial area, on relative permeability to identify if that satisfactorily explains this discrepancy. We calculate the total fluid-fluid interfacial areas (IA) during two-phase (oil/water) flow in porous media using pore network modeling. The area is calculated from PNM simulations using the areas associated with corners and throats in pore elements of different shapes. The pore network is modeled after a Bentheimer sandstone, using square, triangular, and circular pore shapes. Simulations were conducted for numerous primary drainage and imbibition cycles at a constant contact angle of 0° for the wetting phase. Simultaneous measurements of capillary pressure, relative permeability, saturation, and phase connectivity are made for each displacement. Fluid-fluid interfacial area is calculated from the PNM capillary pressure, the fluid location in the pore elements, and the pore element dimensional data. The results show that differences in the relative permeability at the same (S,X) point is explained well by differences in the fluid-fluid interfacial area (IA). That is, for a larger change in IA at these intersection points, the permeability difference is greater. That difference in relative permeability approaches zero as the difference in IA approaches zero. This confirms that relative permeability can be modeled better as a unique function of S, X, and IA. The results also show that an increase in IA restricts flow decreasing the nonwetting (oil) phase permeability. This decrease is caused by an increase in the throat area fraction compared to the corner area as the total area IA increases. The wetting phase relative permeability, however, shows the inverse trend, in that its relative permeability is greater when IA becomes larger owing to a greater fraction of the total area associated with the corners. The area IA, however, impacts the nonwetting phase relative permeability more than the wetting phase relative permeability. Corner flow improves the wetting phase relative permeability because the wetting phase is continuous there. Finally, a sensitivity analysis shows that relative permeability a is more sensitive to change in S than they are for IA for the case studied implying that if only two parameters are used to model relative permeability it is better to choose S and X.

Engineering↗
DOE OSTI2023

Understanding Biases in Sample Preparation Techniques for Coupled Scanning Electron Microscopy and MAMA PuO 2 Morphological Analysis

In this project, the scanning electron microscopy (SEM) sampling method used during the statistical design study (SDS) was investigated to determine if any sampling biases were present in the analyzed data. Using standard particle size distribution powders from the National Institute of Standards and Technology (NIST 1984 standard reference material) with the origin wet dispersion method, it was determined that a bias to smaller particles was present. This was supported by theoretical calculations using Stokes’ law to determine the settling rate of spherical particles of roughly the same size and mass as those found in the SDS. Based on the theoretical calculations, it was determined that the settling rate for each of the 76 powder sets in the SDS could be unique based on specific particle shape and mass distributions, making a universal correction factor/formula not applicable. Therefore, priority shifted to developing an improved wet dispersion method that significantly reduced the particle settling rate for all particle size and shapes. This was achieved by replacing the original solvent (isopropyl alcohol) with a heavy liquid (lithium heteropolytungstates), which dramatically slowed the settling rate and allowed for the capture of a suitable homogeneous aliquot. SEM imaging and Morphological Analysis for Material Attribution (MAMA) software analysis were conducted on the NIST standard, and the SEM/MAMA data were compared to data captured by a dynamic image analysis particle size analyzer. The resulting data confirmed that the new wet dispersion method does indeed deliver an improved representative aliquot to the SEM stub. For instance, in the NIST certificate, the average particle size is ~17.1 µm ± 2.2 µm with a normal distribution. The initial wet dispersion method resulted in a drastically reduced average particle size of 6.1 µm in addition to a non-representative heavy bi-modal distribution whereas the improved LST wet dispersion method resulting in an average particle size that was much closer to the NIST certificate (12.7 µm) with a similar normal distribution. Although the improved method was still short of the NIST certificate average, atomic force microscopy analysis determined that the resulting ~20-25% reduction in size was due to particles sinking into the carbon sticky tape used for SEM imaging. It is believed that that this bias can be calibrated in a much more predicable manner than the original settling rate bias. In addition, the matching normal distribution curves between the NIST certificate and the heavy liquid method indicate a much-improved representative aliquot has been sampled and imaged. A surrogate CeO 2 powder was used to reflect PuO 2 more accurately and to aid in implementing radiological controls and shielding. The resulting data sets from the SEM/MAMA method and the particle size analyzer give almost identical average particle sizes and particle distribution statistics. Future work will re-analyze several select runs from the SDS to determine if morphological signatures can be found with the improved sampling method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Surface-Tailoring and Morphology Control as Strategies for Sustainable Development in Transport Sector

Surface wetting plays an important role in the corrosion protection processes of aerospace applications. Here, we demonstrate the use of ultrafast femtosecond (fs) laser processing techniques to tailor the wetting properties of aluminum (Al) substrates by creating diverse surface morphologies. Specifically, two distinct laser scanning methods—dot-hatching and cross-hatching—were employed to fabricate microstructures on the substrates. By varying the incident laser parameters, we confirmed that the resulting surface morphologies exhibit different wetting behaviors, spanning from hydrophilicity to hydrophobicity. Furthermore, time-resolved spreading tests validate that dynamic wetting behaviors can also be modified. This fs laser processing approach provides a straightforward, one-step fabrication method for effectively modifying the wetting properties of Al alloys.

de Almeida Prado, Luis Antonio Sanchez↗
DOE OSTI2023

Seasonal controls on isolated convective storm drafts, precipitation intensity, and life cycle as observed during GoAmazon2014/5

Abstract. Isolated deep convective cloud life cycle and seasonal changes in storm properties are observed for daytime events during the US Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Green Ocean Amazon Experiment (GoAmazon2014/5) campaign to understand controls on storm behavior. Storm life cycles are documented using surveillance radar from initiation through maturity and dissipation. Vertical air velocity estimates are obtained from radar wind profiler overpasses, with the storm environment informed by radiosondes. Dry-season storm conditions favored reduced morning shallow cloud coverage and larger low-level convective available potential energy (CAPE) than wet-season counterparts. The typical dry-season storm reached its peak intensity and size earlier in its life cycle compared with wet-season cells. These cells exhibited updrafts in core precipitation regions (Z>35 dBZ) to above the melting level as well as persistent downdrafts aloft within precipitation adjacent to their cores. Moreover, dry-season cells recorded more intense updrafts to earlier life cycle stages as well as a higher incidence of strong updrafts (i.e., >5 m s−1) at low levels. In contrast, wet-season storms were longer-lived and featured a higher incidence of moderate (i.e., 2–5 m s−1) updrafts aloft. These storms also favored a shift in their most intense properties to later life cycle stages. Strong downdrafts were less frequent within wet-season cells aloft, indicating a potential systematic difference in draft behaviors, as linked to graupel loading and other factors between the seasons. Results from a stochastic parcel model suggest that dry-season cells may expect stronger updrafts at low levels because of larger low-level CAPE in the dry season. Wet-season cells anticipate strong updrafts aloft because of larger free-tropospheric relative humidity and reduced entrainment-driven dilution. Enhanced dry-season downdrafts are partially attributed to increased evaporation, dry-air entrainment mixing, and negative buoyancy in regions adjacent to sampled dry-season cores.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A thermal-driven graupel generation process to explain dry-season convective vigor over the Amazon

Large-eddy simulations (LESs) are conducted for each day of the intensive observation periods (IOPs) of the Green Ocean Amazon (GoAmazon) field campaign to characterize the updrafts and microphysics within deep convective cores while contrasting those properties between Amazon wet and dry seasons. Mean Doppler velocity (V dop ) values simulated using LESs are compared with 2-year measurements from a radar wind profiler (RWP) as viewed by statistical composites separated according to wet- and dry-season conditions. In the observed RWP and simulated LES V dop composites, we find more intense low-level updraft velocity, vigorous graupel generation, and intense surface rain during the dry periods compared with the wet periods. To investigate coupled updraft–microphysical processes further, single-day golden cases are selected from the wet and dry periods to conduct detailed cumulus thermal tracking analysis. Tracking analysis reveals that simulated dry-season environments generate more droplet-loaded low-level thermals than wet-season environments. This tendency correlates with seasonal contrasts in buoyancy and vertical moisture advection profiles in large-scale forcing. Employing a normalized time series of mean thermal microphysics, the simulated cumulus thermals appear to be the primary generator of cloud droplets. When subsequent thermals penetrate the ice crystal layer, droplets within the thermals interact with entrained ice crystals, which enhances riming in the thermals. This appears to be a production pathway of graupel/hail particles within simulated deep convective cores. In addition, less-diluted dry-case thermals tend to be elevated higher, and graupel grows further during sedimentation after spilling out from thermals. Therefore, greater concentrations of low-level moist thermals likely result in more graupel/hail production and associated dry-season convective vigor.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Modeling land surface processes over a mountainous rainforest in Costa Rica using CLM4.5 and CLM5

This study compares the performance of the Community Land Models (CLM4.5 and CLM5) against tower and ground measurements from a tropical montane rainforest in Costa Rica. The study site receives over 4000 mm of mean annual precipitation and has high daily levels of relative humidity. The measurement tower is equipped with eddy-covariance and vertical profile systems able to measure various micrometeorological variables, particularly in wet and complex terrain. In this work, results from point-scale simulations for both CLM4.5 and its updated version (CLM5) are compared to observed canopy flux and micrometeorological data. Both models failed to capture the effects of frequent rainfall events and mountainous topography on the variables of interest (temperatures, leaf wetness, and fluxes). Overall, CLM5 alleviates some errors in CLM4.5, but CLM5 still cannot precisely simulate a number of canopy processes for this forest. Soil, air, and canopy temperatures, as well as leaf wetness, remain too sensitive to incoming solar radiation rates despite updates to the model. As a result, daytime vapor flux and carbon flux are overestimated, and modeled temperature differences between day and night are higher than those observed. Slope effects appear in the measured average diurnal variations of surface albedo and carbon flux, but CLM5 cannot simulate these features. This study suggests that both CLMs still require further improvements concerning energy partitioning processes, such as leaf wetness process, photosynthesis model, and aerodynamic resistance model for wet and mountainous regions.

58 GEOSCIENCES↗
DOE OSTI2020

Solvent–Solvent Correlations across Graphene: The Effect of Image Charges

Wetting experiments show pure graphene to be weakly hydrophilic, but its contact angle (CA) also reflects the character of the supporting material. Measurements and Molecular Dynamics simulations on suspended and supported graphene often reveal a CA reduction due to the presence of the supporting substrate. A similar reduction is consistently observed when graphene is wetted from both sides. The effect has been attributed to transparency to molecular interactions across the graphene sheet, however, the possibility of substrate-induced graphene polarization has also been considered. Computer simulations of CA on graphene have so far been determined by ignoring the material’s conducting properties. We improve the graphene model by incorporating its conductivity according to the Constant Applied Potential Molecular Dynamics. Using this method, we compare the wettabilities of suspended graphene and graphene supported by water by measuring the CA of cylindrical water drops on the sheets. The inclusion of graphene conductivity and concomitant polarization effects lead to a lower CA on suspended graphene but the CA reduction is significantly bigger when the sheets are also wetted from the opposite side. The stronger adhesion is accompanied by a profound change in the correlations among water molecules across the sheet. While partial charges on water molecules interacting across an insulator sheet attract charges of the opposite sign, apparent attraction among like charges is manifested across the conducting graphene. The change is associated with graphene polarization, as the image charges inside the conductor attract equally signed partial charges of water molecules on both sides of the sheet. Additionally, by using a non-polar liquid (diiodomethane), we affirm a detectable wetting translucency when liquid-liquid forces are dominated by dispersive interactions. Furthermore, our findings are important for predictive modeling toward a variety of applications including sensors, fuel cell membranes, water filtration, and graphene-based electrode materials in high-performance supercapacitors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Cut–and–chip harvester material capacity and fuel performance on commercial-scale willow fields for varying ground and crop conditions

Shrub willow (Salix spp.) is capable of producing commercially attractive amounts of biomass in short rotations, but harvesting costs and logistics remain a concern. There is a particular need for information about harvesting operations on larger, commercial short–rotation woody crop systems. Another recent issue on commercial fields in northern New York is commercial growers conducting harvests during the growing season rather than the recommended dormant season when fields may be too wet to harvest. This study evaluated and modeled the in–field performance of a cut–and–chip harvester for almost 700 wagonloads of chips operating in commercial willow fields in a wider array of crop and field conditions than have been previously reported. Analysis indicated that the time of harvest (leaf–on or leaf–off) and whether site conditions were wet or dry affected the harvester's material capacity. Mean material capacity was greatest for leaf–off, dry conditions (71.8 Mg/hr) and lowest for leaf–on harvests, which were similar for wet (30.4 Mg/hr) and dry conditions (29.7 Mg/hr). Mean crop specific fuel consumption ranged between 1.3 and 3.3 L/Mg, but can get considerably higher for standing biomasses below 40 Mg/ha. Wet ground conditions and leaf–on harvests tend to decrease material capacity and increase fuel consumption as the harvester has to divert power to forward movement and material processing. Relationships for material capacity and fuel consumption based on standing biomass, time of harvest and ground conditions will be essential for evaluating and modeling the economic and environmental impacts of commercial–scale willow operations.

09 BIOMASS FUELS↗
DOE OSTI2020

Hawai‘i National Marine Renewable Energy Center (HINMREC)

The Hawaii National Marine Renewable Energy Center (HINMREC) was established to facilitate the commercialization of wave energy converter (WEC) devices, and to accelerate development and testing of Ocean Thermal Energy Conversion (OTEC) technologies. Housed at the Hawaii Natural Energy Institute (HNEI) of the University of Hawaii (UH), this program started with execution of the contract between the US Department of Energy (DOE) and UH in March 2009, and activities ran through the end of the project in September 2019. The DOE tasked HINMREC with facilitating and accelerating the build-out of the Navy’s Wave Energy Test Site (WETS), the nation’s first grid-connected open water wave energy conversion test facility, located off Marine Corps Base Hawaii (MCBH) in Kaneohe, on the island of Oahu. WETS was expanded from an existing test berth at 30m water depth to include test berths at 60m and 80m water depths. In recognition of the high costs associated with at-sea testing and evaluation of WEC devices, it was deemed imperative that HINMREC seek ways to reduce costs to developers by providing key research support to these early-stage technologies. WETS and HINMREC’s support allowed development of wave energy technology by providing a testing infrastructure that allows technology developers to test, demonstrate and evaluate their WEC devices, and generate data in order to advance WEC designs toward commercial readiness. HINMREC’s roles have included support in the establishment of the full site, including of wave resource characterization and site survey, followed by the essential roles of independent WEC device power performance assessment and environmental monitoring in support of deployed pre-commercial WECs. This DOE-funded work transitioned effectively to continue Navy-funded tasks for OTEC development, and activities at WETS, now under Naval Facilities Engineering Command (NAVFAC) funding. A secondary objective in the establishment of HINMREC was to assist the private sector in moving OTEC systems beyond proof-of-concept to pre-commercialization, primarily focused on system and component engineering, and local and global investigations into the potential environmental impacts of OTEC systems. HINMREC was tasked with maintaining high-resolution models of ocean thermal resources and the potential sustainable power output of OTEC systems. Ongoing tests begun previously under Navy funding at the OTEC Heat Exchangers (HXs) Test Facility at the Natural Energy Laboratory of Hawaii Authority (NELHA), in Kona on Hawaii Island, have been continued to identify cost-effective aluminum alloys for use in OTEC systems operating in the corrosive marine environment.

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

Probing Heterogeneous Degradation of Catalyst in PEM Fuel Cells under Realistic Automotive Conditions with Multi-Modal Techniques

The heterogeneity of polymer electrolyte fuel cell catalyst degradation is studied under varied relative humidity and types of feed gas. Accelerated stress tests (ASTs) are performed on four membrane electrode assemblies (MEAs) under wet and dry conditions in an air or nitrogen environment for 30 000 square voltage cycles. The largest electrochemically active area loss is observed for MEA under wet conditions in a nitrogen gas environment AST due to constant upper potential limit of 0.95 V and significant water content. The mean Pt particle size is larger for the ASTs under wet conditions compared to dry conditions, and the Pt particle size under land is generally larger than under the channel. Observations from ASTs in both conditions and gas environments indicate that water content promotes Pt particle size growth. ASTs under wet conditions and an air environment show the largest difference in Pt particle size growth for inlet versus outlet and channel versus land, which can be attributed to larger water content at outlet and under land compared to inlet and under channel. From X-ray fluorescence experiments Pt particle size increase is a local phenomenon as Pt loading remains relatively uniform across the MEA.

25 ENERGY STORAGE↗