Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “two dimensional materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Understanding the Lithium Storage Mechanism of Ti 3 C 2 T x MXene

MXenes, as an emerging family of conductive two-dimensional materials, hold promise for late-model electrode materials in Li-ion batteries. A primary challenge hindering the development of MXenes as electrode materials is that a complete understanding of the intrinsic storage mechanism underlying the charge/discharge behavior remains elusive. This article presents two key discoveries: first, the characteristics of the Ti 3 C 2 T x structure can be modified systematically by calcination in various atmospheres, and second, these structural changes greatly affect Li-ion storage behavior, which reveals the mechanism for lithium storage in Ti 3 C 2 T x MXene. Specifically, via ammonization, the interlayer spacing gets dilated and uniform, giving rise to only one redox couple. In stark contrast, there are two well-recognized redox couples corresponding to two interlayer spacings in pristine Ti 3 C 2 T x MXene, in which Li-ion (de)intercalation occurs between interlayers in a sequential manner as evidenced by ex situ X-ray diffraction (XRD). Notably, the XRD diffraction peaks shift hardly in the whole range of charge/discharge voltage, indicating a zero-strain feature upon Li-ion (de)intercalation. Moreover, the diffusion-controlled contribution percentage to capacity inversely depends on the scan rate. The understanding suggests a new design principle of the MXene anode: reduced lateral size to shorten the diffusion path and dilated interlayer spacing.

25 ENERGY STORAGE↗

Transition metal decorated graphene-like zinc oxide monolayer: A first-principles investigation

Transition metal (TM) atoms have been extensively employed to decorate the two-dimensional materials, endowing them with promising physical properties. Here, we have studied the adsorption of TM atoms (V, Cr, Mn, Fe, and Co) on graphene-like zinc oxide monolayer (g-ZnO) and the substitution of Zn by TM using first-principles calculations to search for the most likely configurations when TM atoms are deposited on g-ZnO. We found that when a V atom is initially placed on the top of Zn atom, V will squeeze out Zn from the two-dimensional plane then substitute it, which is a no barrier substitution process. For heavier elements (Cr to Co), although the substitution configurations are more stable than the adsorption ones, there is an energy barrier for the adsorption-substitution transition with the height of tens to hundreds meV. Therefore, Cr to Co prefers to be adsorbed on the hollow site or the top of oxygen, which is further verified by the molecular dynamics simulations. The decoration of TM is revealed to be a promising approach in terms of tuning the work function of g-ZnO in a large energy range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interplay of screening and superconductivity in low-dimensional materials

A quantitative description of Coulomb interactions is developed for two-dimensional superconducting materials, enabling us to compare intrinsic with external screening effects, such as those due to substrates. Therefore, using the example of a doped monolayer of MoS 2 embedded in a tunable dielectric environment, we demonstrate that the influence of external screening is limited to a length scale, bounded from below by the effective thickness of the quasi-two-dimensional material and from above by its intrinsic screening length. As a consequence, it is found that unconventional Coulomb-driven superconductivity cannot be induced in MoS 2 by tuning the substrate properties alone. Our calculations of the retarded Morel-Anderson Coulomb potential μ* reveal that the Coulomb interactions, renormalized by the reduced layer thickness and the substrate properties, can shift the onset of the electron-phonon driven superconducting phase in monolayer MoS 2 but do not significantly affect the critical temperature at optimal doping.

2-dimensional systems↗

Silicon-Phosphorene Nanocavity-Enhanced Optical Emission at Telecommunications Wavelengths

Generating and amplifying light in silicon (Si) continues to attract significant attention due to the possibility of integrating optical and electronic components in a single material platform. Unfortunately, silicon is an indirect band gap material and therefore an inefficient emitter of light. With the rise of integrated photonics, the search for silicon-based light sources has evolved from a scientific quest to a major technological bottleneck for scalable, CMOS-compatible, light sources. Recently, emerging two-dimensional materials have opened the prospect of tailoring material properties based on atomic layers. Few-layer phosphorene, which is isolated through exfoliation from black phosphorus (BP), is a great candidate to partner with silicon due to its layer-tunable direct band gap in the near-infrared where silicon is transparent. Here we demonstrate a hybrid silicon optical emitter composed of few-layer phosphorene nanomaterial flakes coupled to silicon photonic crystal resonators. We show single-mode emission in the telecommunications band of 1.55 μm ($E_g$ = 0.8 eV) under continuous wave optical excitation at room temperature. The solution-processed few-layer BP flakes enable tunable emission across a broad range of wavelengths and the simultaneous creation of multiple devices. Our work highlights the versatility of the Si-BP material platform for creating optically active devices in integrated silicon chips.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Direct band gap group IV semiconductors and methods of preparing the same

A semiconductor film includes a two-dimensional (2D) material layer having a hexagonal in-plane lattice structure, and a substantially planar Group IV semiconductor layer having a direct band gap on the 2D material layer. A method of fabricating a semiconductor material includes growing a Group IV semiconductor material on a two-dimensional material having a hexagonal in-plane lattice structure. This growth process results in the Group IV semiconductor material having a direct band gap. The semiconductor films may be used in any optoelectronic device, including flexible devices.

36 MATERIALS SCIENCE↗

The 2022 magneto-optics roadmap

Abstract Magneto-optical (MO) effects, viz. magnetically induced changes in light intensity or polarization upon reflection from or transmission through a magnetic sample, were discovered over a century and a half ago. Initially they played a crucially relevant role in unveiling the fundamentals of electromagnetism and quantum mechanics. A more broad-based relevance and wide-spread use of MO methods, however, remained quite limited until the 1960s due to a lack of suitable, reliable and easy-to-operate light sources. The advent of Laser technology and the availability of other novel light sources led to an enormous expansion of MO measurement techniques and applications that continues to this day (see section 1). The here-assembled roadmap article is intended to provide a meaningful survey over many of the most relevant recent developments, advances, and emerging research directions in a rather condensed form, so that readers can easily access a significant overview about this very dynamic research field. While light source technology and other experimental developments were crucial in the establishment of today’s magneto-optics, progress also relies on an ever-increasing theoretical understanding of MO effects from a quantum mechanical perspective (see section 2), as well as using electromagnetic theory and modelling approaches (see section 3) to enable quantitatively reliable predictions for ever more complex materials, metamaterials, and device geometries. The latest advances in established MO methodologies and especially the utilization of the MO Kerr effect (MOKE) are presented in sections 4 (MOKE spectroscopy), 5 (higher order MOKE effects), 6 (MOKE microscopy), 8 (high sensitivity MOKE), 9 (generalized MO ellipsometry), and 20 (Cotton–Mouton effect in two-dimensional materials). In addition, MO effects are now being investigated and utilized in spectral ranges, to which they originally seemed completely foreign, as those of synchrotron radiation x-rays (see section 14 on three-dimensional magnetic characterization and section 16 on light beams carrying orbital angular momentum) and, very recently, the terahertz (THz) regime (see section 18 on THz MOKE and section 19 on THz ellipsometry for electron paramagnetic resonance detection). Magneto-optics also demonstrates its strength in a unique way when combined with femtosecond laser pulses (see section 10 on ultrafast MOKE and section 15 on magneto-optics using x-ray free electron lasers), facilitating the very active field of time-resolved MO spectroscopy that enables investigations of phenomena like spin relaxation of non-equilibrium photoexcited carriers, transient modifications of ferromagnetic order, and photo-induced dynamic phase transitions, to name a few. Recent progress in nanoscience and nanotechnology, which is intimately linked to the achieved impressive ability to reliably fabricate materials and functional structures at the nanoscale, now enables the exploitation of strongly enhanced MO effects induced by light–matter interaction at the nanoscale (see section 12 on magnetoplasmonics and section 13 on MO metasurfaces). MO effects are also at the very heart of powerful magnetic characterization techniques like Brillouin light scattering and time-resolved pump-probe measurements for the study of spin waves (see section 7), their interactions with acoustic waves (see section 11), and ultra-sensitive magnetic field sensing applications based on nitrogen-vacancy centres in diamond (see section 17). Despite our best attempt to represent the field of magneto-optics accurately and do justice to all its novel developments and its diversity, the research area is so extensive and active that there remains great latitude in deciding what to include in an article of this sort, which in turn means that some areas might not be adequately represented here. However, we feel that the 20 sections that form this 2022 magneto-optics roadmap article, each written by experts in the field and addressing a specific subject on only two pages, provide an accurate snapshot of where this research field stands today. Correspondingly, it should act as a valuable reference point and guideline for emerging research directions in modern magneto-optics, as well as illustrate the directions this research field might take in the foreseeable future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanoelectronics with proximitized materials

While materials design for many device applications usually relies on adding impurities, recent advances in scaling-down heterostructures with improved interfacial properties offer a different way to transform a large class of materials. A given material can be drastically changed by inheriting properties leaking from its neighboring regions, such as magnetism, superconductivity, or spin-orbit coupling. While these proximity effects often have a short range and are considered negligible, the situation is qualitatively different in atomically thin and two-dimensional materials where the extent of proximity effects can exceed their thickness. Consequently, proximitized materials have a potential to display novel properties and device opportunities, absent in any of the constituent region of the considered heterostructures. Such proximitized materials could provide platforms for a wide range of emerging applications: from seamless integration of memory and logic, to fault-tolerant topologically protected quantum computing.

36 MATERIALS SCIENCE↗

Observation of interlayer plasmon polaron in graphene/WS 2 heterostructures

Harnessing electronic excitations involving coherent coupling to bosonic modes is essential for the design and control of emergent phenomena in quantum materials. In situations where charge carriers induce a lattice distortion due to the electron-phonon interaction, the conducting states get “dressed", which leads to the formation of polaronic quasiparticles. The exploration of polaronic effects on low-energy excitations is in its infancy in two-dimensional materials. Here, we present the discovery of an interlayer plasmon polaron in heterostructures composed of graphene on top of single-layer WS 2 . By using micro-focused angle-resolved photoemission spectroscopy during in situ doping of the top graphene layer, we observe a strong quasiparticle peak accompanied by several carrier density-dependent shake-off replicas around the single-layer WS 2 conduction band minimum. Our results are explained by an effective many-body model in terms of a coupling between single-layer WS 2 conduction electrons and an interlayer plasmon mode. It is important to take into account the presence of such interlayer collective modes, as they have profound consequences for the electronic and optical properties of heterostructures that are routinely explored in many device architectures involving 2D transition metal dichalcogenides.

36 MATERIALS SCIENCE↗

Supertwisted spirals of layered materials enabled by growth on non-Euclidean surfaces

Using curves to make twists The growth of layered materials on flat substrates usually occurs in stacked layers, although defects or a lattice mismatch can induce strains that distort the shape of subsequent layers. However, these effects are usually small and can be uncontrolled. Zhao et al. now demonstrate the possibility of synthesizing multilayers of two-dimensional materials with certain twists between the layers induced by the presence of screw dislocations in combination with curved substrate surfaces. Different twist angles are achieved by varying the amount of nonplanarity and the character (conical or hyperbolic) of the surface. Science , this issue p. 442

Science & Technology - Other Topics↗

Two-step electronic response to magnetic ordering in a van der Waals ferromagnet

The two-dimensional material Cr 2 ⁢Ge 2 ⁢Te 6 is a member of the class of insulating van der Waals (vdW) magnets. Here, using high resolution angle-resolved photoemission spectroscopy in a detailed temperature dependence study, we identify a clear response of the electronic structure to a dimensional crossover in the form of two distinct temperature scales marking onsets of modifications in the electronic structure. Specifically, we observe Te 𝑝-orbital-dominated bands to undergo changes at the Curie transition temperature 𝑇 𝐶 while the Cr 𝑑-orbital-dominated bands begin evolving at a higher temperature scale. Combined with neutron scattering, density functional theory calculations, and Monte Carlo simulations, we find that the electronic system can be consistently understood to respond sequentially to the distinct temperatures at which in-plane and out-of-plane spin correlations exceed a characteristic length scale. Finally, our findings reveal the sensitivity of the orbital-selective electronic structure for probing the dynamical evolution of local moment correlations in vdW insulating magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Towards intrinsic MoS{sub 2} devices for high performance arsenite sensing

Molybdenum disulphide (MoS{sub 2}) is one of the most attractive two dimensional materials other than graphene, and the exceptional properties make it a promising candidate for bio/chemical sensing. Nevertheless, intrinsic properties and sensing performances of MoS{sub 2} are easily masked by the presence of the Schottky barrier (SB) at source/drain electrodes, and its impact on MoS{sub 2} sensors remains unclear. Here, we systematically investigated the influence of the SB on MoS{sub 2} sensors, revealing the sensing mechanism of intrinsic MoS{sub 2}. By utilizing a small work function metal, Ti, to reduce the SB, excellent electrical properties of this 2D material were yielded with 2–3 times enhanced sensitivity. We experimentally demonstrated that the sensitivity of MoS{sub 2} is superior to that of graphene. Intrinsic MoS{sub 2} was able to realize rapid detection of arsenite down to 0.1 ppb without the influence of large SB, which is two-fold lower than the World Health Organization (WHO) tolerance level and better than the detection limit of recently reported arsenite sensors. Additionally, accurately discriminating target molecules is a great challenge for sensors based on 2D materials. This work demonstrates MoS{sub 2} sensors encapsulated with ionophore film which only allows certain types of molecules to selectively permeate through it. As a result, multiplex ion detection with superb selectivity was realized. Our results show prominent advantages of intrinsic MoS{sub 2} as a sensing material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Few-layer SnSe{sub 2} transistors with high on/off ratios

We report few-layer SnSe{sub 2} field effect transistors (FETs) with high current on/off ratios. By trying different gate configurations, 300 nm SiO{sub 2} and 70 nm HfO{sub 2} as back gate only and 70 nm HfO{sub 2} as back gate combined with a top capping layer of polymer electrolyte, few-layer SnSe{sub 2} FET with a current on/off ratio of 10{sup 4} can be obtained. This provides a reliable solution for electrically modulating quasi-two-dimensional materials with high electron density (over 10{sup 13} cm{sup −2}) for field-effect transistor applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic-resolution visualization and doping effects of complex structures in intercalated bilayer graphene

Molecules intercalating two-dimensional materials form complex structures that have been characterized primarily by spatially averaged techniques. In this work, we use aberration-corrected scanning transmission electron microscopy and density-functional-theory (DFT) calculations to study the atomic structure of bilayer graphene (BLG) and few-layer graphene (FLG) intercalated with FeC l 3 . In BLG, we discover two distinct intercalated structures that we identify as monolayer FeC l 3 and monolayer FeC l 2 . The two structures are separated by atomically sharp boundaries and induce large free-carrier densities on the order of 10 13 c m - 2 in the graphene layers. In FLG, we observe multiple FeC l 3 layers stacked in a variety of possible configurations with respect to one another. Lastly, we find that the microscope's electron beam can convert the FeC l 3 monolayer into FeOCl monolayers in a rectangular lattice. These results reveal the need for a combination of atomically resolved microscopy, spectroscopy, and DFT calculations to identify intercalated structures and study their properties.

36 MATERIALS SCIENCE↗

One-Pot Coating of Ceramic Powders by Exfoliated Boron Nitride Layers with a Dense CO 2 Medium and Ultrasound-Aided Mixing

The coating or doping of substrates by two-dimensional materials to impart superior functional properties (such as improved thermal conductivity, bacterial resistance, reduced friction) is receiving increased attention. Environmentally benign, rapid and scalable coating techniques are desirable for this purpose. Here, we report a novel process for coating alumina, silicon carbide and boron carbide substrates with hexagonal boron nitride (h-BN) layers. The process consists of two sequential steps. First, h-BN layers are exfoliated from bulk h-BN in supercritical carbon dioxide (scCO 2 ) using ultrasound-aided mixing. This step is followed by self-assembly (i.e., coating) of the exfoliated h-BN on the substrates in liquid CO 2 also aided by ultrasound. The liquid CO 2 state is achieved by simply lowering the pressure and temperature of the first step below the critical point of CO 2 (P c = 72.8 atm; T c = 31.1 °C). Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) micrographs clearly reveal the exfoliation of h-BN under scCO 2 conditions as well as the h-BN assembly on various substrates under liquid CO 2 conditions. X-ray diffraction patterns confirm the structural integrity of the coated h-BN layers. It was also confirmed that without a transition to the liquid CO 2 phase following exfoliation in scCO 2 , there was negligible coating of h-BN on the substrates. Researchers in the field could consider this benign process to rapidly coat or dope materials with h-BN and other 2D materials to impart improved functional properties in myriad applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Imaging Strain-Localized Single-Photon Emitters in Layered GaSe below the Diffraction Limit

Nanoscale strain control of exciton funneling is an increasingly critical tool for the scalable production of single photon emitters (SPEs) in two-dimensional materials. However, conventional far-field optical microscopies remain constrained in spatial resolution by the diffraction limit and thus can provide only a limited description of nanoscale strain localization of SPEs. Here, we quantify the effects of nanoscale heterogeneous strain on the energy and brightness of GaSe SPEs on nanopillars with correlative cathodoluminescence, photoluminescence, and atomic force microscopy, supported by density functional theory simulations. We report the strain-localized SPEs have a broad range of emission wavelengths from 620 to 900 nm. We reveal substantial strain-controlled SPE wavelength tunability over a ~100 nm spectral range and 2 orders of magnitude enhancement in the SPE brightness at the pillar center due to Type-I exciton funneling. In addition, we show that radiative biexciton cascade processes contribute to observed CL photon superbunching. Also, the GaSe SPEs show excellent stability, where their properties remain unchanged after electron beam exposure. Importantly, we anticipate that this comprehensive study on the nanoscale strain control of two-dimensional SPEs will provide key insights to guide the development of truly deterministic quantum photonics.

2D materials↗

Prediction of room-temperature multiferroicity in strained MoCr 2 S 6 monolayer

The contrasting d-orbital occupation required for ferroelectricity vs ferromagnetism makes it difficult for their coexistence in two-dimensional materials, especially at high temperature. To resolve this intrinsic contradiction, we propose a layered MoCr 2 S 6 multiferroics by alloying magnetic Cr element into the ferroelectric 1T phase of the MoS 2 matrix. First-principles calculations disclose that a spontaneous symmetry breaking, depending on the Mo atom displacement, leads to a robust ferroelectricity, which coexists with a ferromagnetic order originated from two neighboring Cr atoms. The effect can be further enhanced by tensile strain to bring about a room-temperature multiferroicity. Our results shed new light on the fundamental understanding of multiferroics and display promising applications in spintronics and multistate data storage.

2D materials↗

Solving the Bethe-Salpeter equation on a subspace: Approximations and consequences for low-dimensional materials

It is well known that the ambient environment can dramatically renormalize the quasiparticle gap and exciton binding energies in low-dimensional materials, but the effect of the environment on the energy splitting of the spin-singlet and spin-triplet exciton states is less understood. A prominent effect is the renormalization of the exciton binding energy and optical strength (and hence the optical spectrum) through additional screening of the direct Coulomb term describing the attractive electron-hole interaction in the kernel of the Bethe-Salpeter equation. The repulsive exchange interaction responsible for the singlet-triplet splitting, on the other hand, is unscreened within formal many-body perturbation theory. However, Benedict argued that in practical calculations restricted to a subspace of the full Hilbert space, the exchange interaction should be appropriately screened by states outside of the subspace, the so-called S approximation [L. X. Benedict, Phys. Rev. B 66, 193105 (2002)PRBMDO0163-182910.1103/PhysRevB.66.193105]. Here, we systematically explore the accuracy of the S approximation for different confined systems, including a molecule and heterostructures of semiconducting and metallic layered materials. We show that the S approximation is actually exact in the limit of small exciton binding energies (i.e., small direct term) and can be used to significantly accelerate convergence of the exciton energies with respect to the number of empty states, provided that a particular effective screening consistent with the conventional Tamm-Dancoff approximation is employed. We further find that the singlet-triplet splitting in the energy of the excitons is largely unaffected by the external dielectric environment for most quasi-two-dimensional materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation mechanism of twin domain boundary in 2D materials: The case for WTe2

Our scanning tunneling microscopy (STM) study observes, for the first time, twin domain boundary (TDB) formations on the surface of WTe2 single crystal, which is glued by solidifying indium to Si substrate. In these TDB regions, a large inhomogeneous strain field, especially a critical shear strain of about 7%, is observed by geometric phase analysis. This observation does not obey the old believe that a small mechanical stress is sufficient to drive thermally-induced TDB formations in two-dimensional materials. To resolve the contradiction, we perform density functional theory calculations combined with elasticity theory analysis, which show that TDBs on WTe2 are entirely displacement-induced, for which a critical strain is necessary to overcome the onset barrier.

Wang, Guan-Yong↗