Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “tracer data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Diagnosis of Magnetic Structures and Intermittency in Space Plasma Turbulence using the Method of Surrogate Data

Several observations in space plasmas have reported the presence of coherent structures at different plasma scales. Structure formation is believed to be a direct consequence of nonlinear interactions between the plasma modes, which depend strongly on phase synchronization of those modes. Despite this important role of the phases in turbulence, very limited work has been however devoted to study the phases as a potential tracers of nonlinearities in comparison with the wealth of literature on power spectra of turbulence where phases are totally missed. We present a method based on surrogate data to systematically detect coherent structures in turbulent signals. The new method has been applied successfully to magnetosheath turbulence (Sahraoui, Phys. Rev. E, 2008, in press), where the relationship between the identified phase coherence and intermittency (classically identified as non Gaussian tails of the PDFs) as well as the energy cascade has been studied. Here we review the main results obtained in that study and show further applications to small scale solar wind turbulence. Implications of the results on theoretical modelling of space turbulence (applicability of weak/wave turbulence, its validity limits and its connection to intermittency) will be discussed.

Sahraoui, Fouad↗

Particle size distributions from TRACER-MAP

Particle size distributions measured using a custom scanning mobility analyzer (SMPS) and a TSI, Inc. aerodynamic particle sizer (APS). The size distributions measured with the two instruments were merged during data inversion to produce a single distribution spanning a diameter range from approximately 19 nanometers to 15 micrometers. Size-dependent cloud condensation nuclei (CCN) activity measured with a CCN counter operated in parallel to the condensation particle counter in the SMPS are reported separately. The measurements were made from the Baylor University/University of Houston Mobile Air Quality Laboratory (MAQL) between July 5 and August 30, 2022 during the TRACER-MAP project. The trailer moved between five sites in the Houston regions as follows: Aldine: 7/5-7/8, 7/21-7/26, 8/15-8/24 University of Houston: 7/8-7/16, 8/8-8/15 San Jacinto monument: 7/16-7/21 Jones State Forest: 7/26-8/1; 8/24-8/30 AMF site in La Porte: 8/1-8/8

54 ENVIRONMENTAL SCIENCES↗

Particle size distributions from TRACER-MAP

Particle size distributions measured using a custom scanning mobility analyzer (SMPS) and a TSI, Inc. aerodynamic particle sizer (APS). The size distributions measured with the two instruments were merged during data inversion to produce a single distribution spanning a diameter range from approximately 19 nanometers to 15 micrometers. Size-dependent cloud condensation nuclei (CCN) activity measured with a CCN counter operated in parallel to the condensation particle counter in the SMPS are reported separately. The measurements were made from the Baylor University/University of Houston Mobile Air Quality Laboratory (MAQL) between July 5 and August 30, 2022 during the TRACER-MAP project. The trailer moved between five sites in the Houston regions as follows: Aldine: 7/5-7/8, 7/21-7/26, 8/15-8/24 University of Houston: 7/8-7/16, 8/8-8/15 San Jacinto monument: 7/16-7/21 Jones State Forest: 7/26-8/1; 8/24-8/30 AMF site in La Porte: 8/1-8/8

54 ENVIRONMENTAL SCIENCES↗

Redshift inference from the combination of galaxy colours and clustering in a hierarchical Bayesian model – Application to realistic N -body simulations

ABSTRACT Photometric galaxy surveys constitute a powerful cosmological probe but rely on the accurate characterization of their redshift distributions using only broad-band imaging, and can be very sensitive to incomplete or biased priors used for redshift calibration. A hierarchical Bayesian model has recently been developed to estimate those from the robust combination of prior information, photometry of single galaxies, and the information contained in the galaxy clustering against a well-characterized tracer population. In this work, we extend the method so that it can be applied to real data, developing some necessary new extensions to it, especially in the treatment of galaxy clustering information, and we test it on realistic simulations. After marginalizing over the mapping between the clustering estimator and the actual density distribution of the sample galaxies, and using prior information from a small patch of the survey, we find the incorporation of clustering information with photo-z’s tightens the redshift posteriors and overcomes biases in the prior that mimic those happening in spectroscopic samples. The method presented here uses all the information at hand to reduce prior biases and incompleteness. Even in cases where we artificially bias the spectroscopic sample to induce a shift in mean redshift of $\Delta \bar{z} \approx 0.05,$ the final biases in the posterior are $\Delta \bar{z} \lesssim 0.003.$ This robustness to flaws in the redshift prior or training samples would constitute a milestone for the control of redshift systematic uncertainties in future weak lensing analyses.

79 ASTRONOMY AND ASTROPHYSICS↗

A21I-1875: Leveraging TEMPO Formaldehyde Observations to Assess Surface Air Quality

Surface ozone (O3) pollution is detrimental to human health, crop yields, and ecosystem productivity. Ground-based ozone observations are sparse and surface ozone retrievals from space are challenging. The process of producing ozone from the oxidation of volatile organic compounds (VOCs) in the presence of nitrogen oxides (NOx) results in formaldehyde (HCHO), which can be observed from satellite and by surface-based remote sensing. From limited field campaign observations, column formaldehyde has been shown to exhibit a strong relationship with surface ozone and, therefore, could be an useful proxy for detecting unmonitored regions of elevated ozone pollution. The spatiotemporal characteristics of this relationship are explored using ground-based Pandora spectrometers and airborne remote sensing data with surface ozone monitors across the United States during recent field campaigns over major cities (TRACER-AQ and STAQS). We extend our analysis to take advantage of HCHO column observations from recently launched Tropospheric Emissions: Monitoring of Pollution (TEMPO), a geostationary satellite over North America. TEMPO observations show preliminary promise in mapping regions of elevated surface ozone from space using column HCHO. We demonstrate the use of column HCHO in assessing the strength of the surface monitoring network, and in detecting the extent of regional ozone exceedances.

Prajjwal Rawat↗

Effects of Pinatubo aerosol on stratospheric ozone at mid-latitudes

Mid-latitude ozone data from ER-2 aircraft measurements in 1989, 1991, and 1992 were examined to determine how sulfate aerosols from the eruption of Mt. Pinatubo had affected ozone at about 18 km. N2O was used as a tracer to help distinguish between chemical and dynamical aerosol effects. At 20-45 deg N in February 1992, ozone was about 10-20% lower than February 1989 and 1991, with respect to N2O. Data from Aug. 1991 - Mar. 1992 showed changes in ozone with respect to N2O, but the magnitude of those changes was not correlated with the magnitude of the changes in aerosol surface area density.

Weaver, A.↗

Effects of Pinatubo Aerosol on Stratospheric Zone at Mid-Lattiudes

Mid-latitude ozone data from ER-2 aircraft measurements in 1989, 1991 and 1992 were examined to determine how sulfate aerosols from the eruption of Mt. Pinatubo had affected ozone at about 18 km. N2O was used as a tracer to help distinguish between chemical and dynamical aerosol effects. At 20-45 deg N in February 1992, ozone was about 10-20% lower than February 1989 and 1991, with respect to N2O. Data from Aug.1991 - Mar. 1992 showed changes in ozone with respect to N2O, but the magnitude of those changes was not correlated with the magnitude of the changes in aerosol surface area density.

Weaver, A.↗

Summertime distribution of PAN and other reactive nitrogen species in the northern high-latitude atmosphere of eastern Canada

Aircraft measurements of key reactive nitrogen species (NO, NO2, HNO3, PAN, PPN, NO3(-), NO(y)), C1 to C6 hydrocarbons, acetone, O3, chemical tracers (C2Cl4, CO), and important meteorological parameters were performed over eastern Canada during July to August 1990 at altitudes between 0 and 6 km as part of an Arctic Boundary Layer Expedition (ABLE3B). In the free troposphere, PAN was found to be the single most abundant reactive nitrogen species constituting a major fraction of NO(y) and was significantly more abundant than NO(x) and HNO3. PAN and O3 were well correlated both in their fine and gross structures. Compared to data previously collected in the Arctic/subarctic atmosphere over Alaska (ABLE3A), the lower troposphere (0-4 km) over eastern Canada was found to contain larger reactive nitrogen and anthropogenic tracer concentrations. At higher altitudes (4-6 km) the atmospheric composition was in many ways similar to what was seen over Alaska and supports the view that a large-scale reservoir of PAN (and NO(y)) is present in the upper troposphere over the entire Arctic/subarctic region. The reactive nitrogen budget based on missions conducted from the North Bay site (missions 2-10) showed a small shortfall, whereas the budget for data collected from the Goose Bay operation (missions 11-19) showed essential balance. It is calculated that 15-20 ppt of the observed NO(x) may find its source from the available PAN reservoir. Meteorological considerations as well as relationships between reactive nitrogen and tracer species suggest that the atmosphere over eastern Canada during summer is greatly influenced by forest fires and transported industrial pollution.

Singh, H. B.↗

TRACER Overview 200220 [Slides]

The Atmospheric Radiation Measurement (ARM) User Facility is a U.S. Department of Energy Office of Science asset to be used by scientists to further our scientific knowledge about the atmosphere. The DOE ARM program has maintained facilities for use by the scientific community for 25 years. Data is freely available at www.arm.gov. The ARM science objective is to provide a detailed and accurate description of the Earth’s atmosphere to resolve uncertainties in earth system models. This report provides information on TRACER: TRacking Aerosol Convection Interations Experiment.

54 ENVIRONMENTAL SCIENCES↗

TRACER-MAP AMS Measurement

Aerosol composition was measured by using the high resolution time-of-flight aerosol mass spectrometer (HR ToF-AMS). The data were collected at five different sites (AMF1, Aldine, University of Houston (UH), Jones Forest (JF), San Jacinto Battleground (BG)) from July to August, 2022. Dataset includes time series of five species of aerosol composition: Organic, sulfate (SO4), nitrate (NO3), ammonium (NH4), chlorine (Chl)

54 ENVIRONMENTAL SCIENCES↗

Determination of the Far-Infrared Cosmic Background Using COBE/DIRBE and WHAM Data

Determination of the cosmic infrared background (CIB) at far infrared wavelengths using COBE/DIRBE data is limited by the accuracy to which foreground interplanetary and Galactic dust emission can be modeled and subtracted. Previous determinations of the far infrared CIB (e.g., Hauser et al. 1998) were based on the detection of residual isotropic emission in skymaps from which the emission from interplanetary dust and the neutral interstellar medium were removed. In this paper we use the Wisconsin H(alpha) Mapper (WHAM) Northern Sky Survey as a tracer of the ionized medium to examine the effect of this foreground component on determination of the CIB. We decompose the DIRBE far infrared data for five high Galactic latitude regions into HI- and H(alpha)- correlated components and a residual component. Eased on FUSE H2 absorption line observations, the contribution of a11 H2-correlated component is expected to he negligible. We find the H(alpha)-correlated component to be consistent with zero for each region, and we find that addition of an H(alpha)-correlated component in modeling the foreground emission has negligible effect on derived CIB results. Our CIB detections and 2(sigma) upper limits are essentially the same as those derived by Hauser et al. and are given by (nu)I(sub nu)(nW/sq m/sr) < 75, < 32, 25+/-8, and 13+/-3 at gamma = 60, 100, 140, and 240 microns, respectively. Our residuals have not been subjected to a detailed anisotropy test, so our CIB results do not supersede those of Hauser et al. Mie derive upper limits on the 100 micron emissivity of the ionized medium that are typically about 40% of the 100 micron emissivity of the neutral atomic medium. This low value may be caused in part by a lower dust-to-gas mass ratio in the ionized medium than in the neutral medium, and in part by a shortcoming of using H(alpha) intensity as a tracer of far infrared emission. If H(alpha) is not a reliable tracer, our analysis would underestimate the emissivity of the ionized medium, and both our analysis and the Hauser et al. analysis may slightly overestimate the CIB. We estimate the possible effect for the CIB to be only about 5%, which is much smaller than the quoted uncertainties. From a comparison of the Hauser et al. CIB results with the integrated galaxy brightness from Spitzer source counts, we obtain 2(sigma) upper limits on a possible diffuse CIB component that are 26 nW/sq m/sr at 140 microns and 8.5 nW/sq m/sr at 240 microns.

Odegard, N.↗

Multiwavelength Characterization of an ACT-Selected, Lensed Dusty Star-Forming Galaxy at zeta 2.64

We present C I(21) and multi-transition C-12 O observations of a dusty star-forming galaxy, ACT J2029+0120,which we spectroscopically confirm to lie at zeta = 2.64. We detect CO(3-2), CO(5-4), CO(7-6), CO(8-7), and C I(2-1) at high significance, tentatively detect HCO+(4-3), and place strong upper limits on the integrated strength of dense gas tracers (HCN(4-3) and CS(7-6)). Multi-transition CO observations and dense gas tracers can provide valuable constraints on the molecular gas content and excitation conditions in high-redshift galaxies. We therefore use this unique data set to construct a CO spectral line energy distribution (SLED) of the source, which is most consistent with that of a ULIRG Seyfert or QSO host object in the taxonomy of the Herschel Comprehensive ULIRG Emission Survey. We employ RADEX models to fit the peak of the CO SLED, inferring a temperature of T approximately 117 K and n(sub H2) approximately 10(exp5) cm(exp -3), most consistent with a ULIRGQSO object and the presence of high-density tracers. We also find that the velocity width of the C I line is potentially larger than seen in all CO transitions forth is object, and that the L'(sub Ci(2-1))/L'(sub CO(3-2))ratio is also larger than seen in other lensed and unlensed submillimeter galaxies and QSO hosts; if confirmed, this anomaly could be an effect of differential lensing of a shocked molecular outflow.

Roberts-Borsani, G. W.↗

Preliminary clustering properties of the DESI BGS bright targets using DR9 Legacy Imaging Surveys

ABSTRACT We characterize the selection cuts and clustering properties of a magnitude-limited sample of bright galaxies that is part of the Bright Galaxy Survey (BGS) of the Dark Energy Spectroscopic Instrument (DESI) using the ninth data release of the Legacy Imaging Surveys (DR9). We describe changes in the DR9 selection compared to the DR8 one and we also compare the DR9 selection in three distinct regions: BASS/MzLS in the north Galactic Cap (NGC), DECaLS in the NGC, and DECaLS in the south Galactic Cap (SGC). We investigate the systematics associated with the selection and assess its completeness by matching the BGS targets with the Galaxy and Mass Assembly (GAMA) survey. We measure the angular clustering for the overall bright sample (rmag ≤ 19.5) and as function of apparent magnitude and colour. This enables to determine the clustering strength r0 and slope γ by fitting a power-law model that can be used to generate accurate mock catalogues for this tracer. We use a counts-in-cells technique to explore higher order statistics and cross-correlations with external spectroscopic data sets in order to check the evolution of the clustering with redshift and the redshift distribution of the BGS targets using clustering redshifts. While this work validates the properties of the BGS bright targets, the final target selection pipeline and clustering properties of the entire DESI BGS will be fully characterized and validated with the spectroscopic data of Survey Validation.

79 ASTRONOMY AND ASTROPHYSICS↗

Qualification of ANSI/HPS N13.1-2011 Mixing Criteria by Computational Fluid Dynamics Modeling for the 3430 Building Fan Addition and Increased Ventilation Capacity

Additional ventilation capacity has been designed for the 3430 Building filtered exhaust stack system. The updated system will increase the number of fans from two to three and include new ductwork with a larger diameter to integrate the new fan into the existing stack. Stack operations will involve running various fan combinations at any given time. The air monitoring system of the existing two-fan stack previously was found to comply with the American National Standards Institute/Health Physics Society (ANSI/HPS) N13.1-1999 standard. Full-scale, three-dimensional computational fluid dynamics (CFD) modeling was used to evaluate the modified three-fan system for compliance with the ANSI/HPS N13.1-2011 standard, which essentially is equivalent to the ANSI/HPS N13.1-1999 standard. The four mixing criteria evaluated are 1) flow angle, 2) velocity, 3) gas tracer, and 4) particle tracer. Benchmarking of the CFD modeling methodology showed good agreement with previous testing used to qualify the stack, and modeling of the existing two-fan system showed good agreement with test data collected from the 3430 Building stack. Modeling was performed to develop a suitable three-fan design. Initial modeling of the three-fan design and basic ductwork showed that flow angles and velocity uniformity were acceptable; however, the gas tracer and particle tracer mixing results were not acceptable. To meet ANSI/HPS N13.1-2011 criteria, an air blender was added to the stack design.

42 ENGINEERING↗

Qualification of ANSI/HPS N13.1-2011 Mixing Criteria by Computational Fluid Dynamics Modeling for the 3430 Building Fan Addition and Increased Ventilation Capacity

Additional ventilation capacity has been designed for the 3430 Building filtered exhaust stack system. The updated system will increase the number of fans from two to three and include new ductwork with a larger diameter to integrate the new fan into the existing stack. Stack operations will involve running various fan combinations at any given time. The air monitoring system of the existing two-fan stack previously was found to comply with the American National Standards Institute/Health Physics Society (ANSI/HPS) N13.1-1999 standard. Full-scale, three-dimensional computational fluid dynamics (CFD) modeling was used to evaluate the modified three-fan system for compliance with the ANSI/HPS N13.1-2011 standard, which essentially is equivalent to the ANSI/HPS N13.1-1999 standard. The four mixing criteria evaluated are 1) flow angle, 2) velocity, 3) gas tracer, and 4) particle tracer. Benchmarking of the CFD modeling methodology showed good agreement with previous testing used to qualify the stack, and modeling of the existing two-fan system showed good agreement with test data collected from the 3430 Building stack. Modeling was performed to develop a suitable three-fan design. Initial modeling of the three-fan design and basic ductwork showed that flow angles and velocity uniformity were acceptable; however, the gas tracer and particle tracer mixing results were not acceptable. To meet ANSI/HPS N13.1-2011 criteria, an air blender was added to the stack design. This revision models the individual maximum fan reduced flow capacity from 38,000 cfm to 31,200 cfm; no changes to the duct design are made.

42 ENGINEERING↗

Non-universal stellar initial mass functions: large uncertainties in star formation rates at z ≈ 2–4 and other astrophysical probes

ABSTRACT We explore the assumption, widely used in many astrophysical calculations, that the stellar initial mass function (IMF) is universal across all galaxies. By considering both a canonical broken-power-law IMF and a non-universal IMF, we are able to compare the effect of different IMFs on multiple observables and derived quantities in astrophysics. Specifically, we consider a non-universal IMF that varies as a function of the local star formation rate, and explore the effects on the star formation rate density (SFRD), the extragalactic background light, the supernova (both core-collapse and thermonuclear) rates, and the diffuse supernova neutrino background. Our most interesting result is that our adopted varying IMF leads to much greater uncertainty on the SFRD at $z \approx 2-4$ than is usually assumed. Indeed, we find an SFRD (inferred using observed galaxy luminosity distributions) that is a factor of $\gtrsim 3$ lower than canonical results obtained using a universal IMF. Secondly, the non-universal IMF we explore implies a reduction in the supernova core-collapse rate of a factor of $\sim 2$, compared against a universal IMF. The other potential tracers are only slightly affected by changes to the properties of the IMF. We find that currently available data do not provide a clear preference for universal or non-universal IMF. However, improvements to measurements of the star formation rate and core-collapse supernova rate at redshifts $z \gtrsim 2$ may offer the best prospects for discernment.

79 ASTRONOMY AND ASTROPHYSICS↗

Mixing in Low Reynolds Number Reacting Impinging Jets in Crossflow

Previous efforts to model uranyl fluoride formation in an impinging jet gas reactor underpredicted spatial mixing and overpredicted chemical conversion into particulates. The previous fluid dynamics model was based on the solution of the Reynolds Averaged Navier Stokes equations. After simulating fluid dynamics, aerosol dynamics were superimposed onto CFD-simulated gas reactant species concentrations. The current work explores the influence of complex unsteady flow features on the overall flow physics and chemistry for a low Reynolds number, opposed flow, impinging jet gas reactor where there is a low Reynolds number cross flow. The objective of this study was to assess the impact of model formulation on scalar mixing and transport. Here, transient flow simulations were performed using Scale Resolving Simulations. Large-Eddy Simulations with the dynamic Smagorinsky turbulence model were performed along with simulations which directly resolved the flow. Average and root-mean-square (RMS) velocities and species concentrations were computed along with modeled and resolved turbulence kinetic energy (TKE), modeled turbulence dissipation, and modeled turbulent viscosity. Lagrangian flow tracers were also used to quantify species concentrations along path lines emanating from the jet tips. Transient simulation data were compared to results from RANS simulations using the k-ω shear stress transport (SST) model and Reynolds Stress Model (RSM). Transient simulations showed spatial mixing patterns which were more consistent with experimental data and helped elucidate the process of particle formation observed in experiments.

42 ENGINEERING↗

Interannual Variability in the Equatorial Stratosphere: Comparison of 2D Model Simulations with Satellite Constituent Data

Satellite observations from UARS and TOMS have provided unique data sets for studying seasonal and interannual stratospheric constituent variability during the 1990's. The corresponding meteorological variability is also well represented by the partly satellite-based UKMO assimilation winds and temperatures. In this study, we use the UKMO meteorological fields to derive zonal mean transport components (residual circulation, horizontal eddy diffusion) for each year, 1992-1998. These fields are then used in our GSFC two-dimensional chemistry and transport model to simulate the year to year changes in ozone and long lived tracers in the equatorial stratosphere due to interannual dynamical variability. The resulting model simulation of ozone and CH4 compares reasonably well with UARS data in reproducing a dominant QBO signal in the lower stratosphere, and a dominant semiannual signature in the upper stratosphere which appears to be modulated by the lower stratospheric QBO. The model also compares well with TOMS data in simulating the phase of the QBO in total ozone, although the model QBO amplitude is somewhat underestimated relative to TOMS. These comparisons illustrate that the general zonal mean transport characteristics in the equatorial stratosphere can be reasonably well simulated using an empirically-based residual circulation.

Fleming, Eric L.↗