Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thrust”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Morphing Downwind-Aligned Rotor Concept Based on a 13-MW Wind Turbine

To alleviate the mass-scaling issues associated with conventional upwind rotors of extreme-scale wind turbines (>/=10 MW), a morphing downwind-aligned rotor (MoDaR) concept is proposed herein. The concept employs a downwind rotor with blades whose elements are stiff (no intentional flexibility) but with hub-joints that can be unlocked to allow for moment-free downwind alignment. Aligning the combination of gravitational, centrifugal and thrust forces along the blade path reduces downwind cantilever loads, resulting in primarily tensile loading. For control simplicity, the blade curvature can be fixed with a single morphing degree of freedom using a near-hub joint for coning angle: 22 degrees at rated conditions. The conventional baseline was set as the 13.2-MW Sandia 100-m all glass blade in a three-bladed upwind configuration. To quantify potential mass savings, a downwind load-aligning, two-bladed rotor was designed. Because of the reduced number of blades, the MoDaR concept had a favorable 33% mass reduction. The blade reduction and coning led to a reduction in rated power, but morphing increased energy capture at lower speeds such that both the MoDaR and conventional rotors have the same average power: 5.4 MW. A finite element analysis showed that quasi-steady structural stresses could be reduced, over a range of operating wind speeds and azimuthal angles, despite the increases in loading per blade. However, the concept feasibility requires additional investigation of the mass, cost and complexity of the morphing hinge, the impact of unsteady aeroelastic influence because of turbulence and off-design conditions, along with system-level Levelized Cost of Energy analysis.

17 WIND ENERGY↗

Analytic analysis of load alignment for coning extreme‐scale rotors

Abstract Extreme‐scale wind turbines (rated powers greater than 10 MW) with large rotor diameters and conventional upwind designs must resist extreme downwind and gravity loads. This can lead to significant structural design challenges and high blade masses that can impede the reduction of levelized cost of wind energy. Herein, the theoretical basis for downwind load alignment is developed. This alignment can be addressed with active downwind coning to reduce/eliminate flapwise bending loads by balancing the transverse components of thrust, centrifugal, and gravitational force. Equations are developed herein that estimates the optimal coning angle that reduces flapwise loads by a specified amount. This analysis is then applied to a 13.2‐MW scale with 100‐m‐level wind turbine blades, where it is found that a load alignment coning schedule can substantially reduce the root flapwise bending moments. This moment reduction in this example can allow the rotor mass to be decreased significantly when compared with a conventional upwind three‐bladed rotor while maintaining structural performance and annual energy output.

Noyes, Carlos↗

Influence of tower shadow on downwind flexible rotors: Field tests and simulations

Abstract As wind turbine rotors become larger, the blades become more flexible, requiring extra stiffness and cost to avoid the risk of tower strike. Wind turbines in a downwind configuration have a reduced risk of tower strike because the rotor thrust acts away from the tower. However, downwind blades pass through the wake of the tower, and the resulting load variation may contribute to blade fatigue. To date, there have been no field tests to quantify this tower shadow effect on unsteady blade moments. The present study reports on the first field testing of a flexible, downwind, coned rotor and compares the experimental data against simulations run in OpenFAST. The tower shadow effect is simulated using the conventional Powles model and a new Eames model (developed herein), which includes the influence of upstream turbulence. Both models reasonably predict the blade root out‐of‐plane bending moment data and the tower shadow dip magnitude when compared to field test data in Region 3. Tower shadow was found to increase the short‐term Damage Equivalent Loads (DELs) by less than 10% compared to other effects (gravity, shear, and turbulence), and the predictions were consistent with experiments. These results indicate that the tower shadow effect can be reasonably modeled with the simpler Powles model and that the tower shadow effect can be small compared to the effect of turbulence. However, long‐term fatigue due to tower shadow should be included in detailed structural analysis and design of the rotor and the tower.

Simpson, Juliet G.↗

Implementation and Validation of a Generalized Actuator Disk Parameterization for Wind Turbine Simulations Within the FastEddy Model

ABSTRACT Fast and accurate large‐eddy simulation (LES) of the atmospheric boundary layer plays a crucial role in advancing wind energy research. Long‐duration wind farm studies at turbine‐resolving scales have become increasingly important to understand the intricate interactions between large wind farms and the atmospheric boundary layer. However, the prohibitive computational cost of these turbulence‐ and turbine‐resolving simulations has precluded such modeling to be exercised on a regular basis. To that end, we implement and validate the generalized actuator disk (GAD) model in the computationally efficient, graphics processing unit (GPU)–resident, LES model FastEddy. We perform single‐turbine simulations under three atmospheric stabilities (neutral, unstable, and stable) and compare them against observations from the Scaled Wind Farm Technology (SWiFT) facility and other LES codes from the recent Wakebench turbine wake model benchmark. Our idealized LES results agree well with observed wake velocity deficit and downstream recovery across stability regimes. Turbine response in terms of rotational speed, generated power, torque, and thrust coefficient are well predicted across stability regimes and are consistent with the LES results from the benchmark. The FastEddy simulations are found to be at least two orders of magnitude more efficient than the traditional CPU‐based LES models, opening the door for realistic LES simulations of full wind plants as a viable standard practice.

17 WIND ENERGY↗

A Green's Function Wind Turbine Induction Model That Incorporates Complex Inflow Conditions

ABSTRACT In this work, we develop a new analytical turbine induction model that can incorporate complex inflow conditions including cases where the wind velocity and temperature profiles can vary as functions of height. This induction model is derived from the linearized Navier–Stokes and leads to a second‐order ODE that can be solved using a Green's function formulation. The corresponding Green's function for several configurations are found including the infinite domain, semi‐infinite domain with ground plane, and a power law velocity inflow profile. The results of this approach are then compared with simulations of the turbine induction field using the AMR‐Wind CFD solver with a uniformly loaded actuator disk model. These comparisons show that the Green's function approach captures the centerline blockage, three‐dimensional blockage flow field, and streamwise velocity slow down, with very good agreement for lower thrust conditions and at larger distances away from rotor disk. The effects of shear on the turbine blockage were also compared using a power law inflow profile, and we show that this approach matches the CFD predictions for the cases considered.

17 WIND ENERGY↗

Safety-Factor Calibration for Wind Turbine Extreme Loads

Proper prediction of long-term extreme values for operating wind turbine loads and deflections is a critical component of wind turbine design. Direct observations or simulations of long-term extremes are not yet available; therefore, these predictions rely on some combination of large numbers of simulations and extrapolation. Extrapolation methods themselves can have significant uncertainty, and they also require that the wind turbine designer have a greater level of statistical expertise--factors that make the methods less attractive for industrial application. As an alternative to extrapolation, safety factors can be calibrated using techniques that allow designers to use smaller data sets. To calculate such factors, a series of simulations was used to extrapolate 50 year extreme values for a 5 MW wind turbine. Two methods are proposed for calculating such safety factors: one based on the mean and standard deviation of extreme values, and one based on the median of extreme values. Through a process of random sampling without replacement, the safety factor based on the median of extreme values was found to be less variable and also more independent of the number of simulations. The safety factors required were as large as 1.7, or were only 1.25 if rotor thrust loads were considered the dominant design drivers.

17 WIND ENERGY↗

Multipoint Aerostructural Optimization of Wind Turbine Rotors Using a Coupled Blade‐Resolved Aerostructural Solver

Physics‐based design optimization workflows thread the needle between computational cost limitations and simulation complexity, often compromising between modeling detail and the range of operating design conditions. Multipoint aerostructural optimization of wind turbine rotors has so far been confined to low‐fidelity analyses or to high‐fidelity studies with simplified structural models, leaving the most complex design trade‐offs unexplored. We close this gap by performing the first tightly coupled gradient‐based multipoint aerostructural rotor optimization using 3D aerodynamic and structural solvers with discrete coupled adjoints. The optimizer simultaneously varies blade planform, airfoil shapes, and structural thickness through more than 270 design variables, minimizing a weighted combination of rotor mass and power across multiple wind speeds. Applied to a modified DTU 10‐MW benchmark under conservative structural and aerodynamic constraints, our multipoint optimization reduces rotor mass by up to 36% and increases power by 12%–15% across the main operating conditions; biasing the objective toward power yields power gains up to 18% and a 17% mass reduction. For a nominal wind distribution, 3‐point rotor designs accounting for low RPM and high thrust conditions capture dominant trade‐offs and outperform single‐point designs. Adding two off‐design points changes individual‐condition power by less than 3% but leaves the weighted average within 0.5%, and the mass‐power bias has a stronger effect on the final design than the operating‐point weighting itself. Our framework extends naturally to richer load cases and site‐specific wind distributions, providing a basis for high‐fidelity multipoint design earlier in industrial workflows.

17 WIND ENERGY↗

e + e - angularity distributions at NNLL' accuracy

We present predictions for the e + e – event shape angularities at NNLL' resummed and O (α 2 s ) matched accuracy and compare them to LEP data at center-of-mass energies Q = 91.2 GeV and Q = 197 GeV. We perform the resummation within the framework of Soft-Collinear Effective Theory, and make use of recent results for the two-loop angularity soft function. We determine the remaining NNLL' and O (α 2 s ) ingredients from a fit to the EVENT2 generator, and implement a shape function with a renormalon-free gap parameter to model non-perturbative effects. Using values of the strong coupling α s (m Z ) and the universal non-perturbative shift parameter Ω 1 that are consistent with those obtained in previous fits to the thrust and C -parameter distributions, we find excellent agreement between our predictions and the LEP data for all angularities with a ϵ [–1, 0.5]. This provides a robust test of the predictions of QCD, factorization, and the universal scaling of the non-perturbative shift across different angularities. Promisingly, our results indicate that current degeneracies in the {α s (m Z ), Ω 1 } parameter space could be alleviated upon fitting these parameters to experimental data for the angularity distributions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An analytic result for the 0 → ggHHH amplitude

We present a fully analytic calculation of the leading-order one-loop amplitude for triple Higgs production via gluon fusion, gg → HHH, retaining full dependence on the mass of the heavy quark circulating in the loop. This amplitude provides a direct probe of the triple and quartic Higgs self-couplings, the measurement of which is a central goal of current and future colliders. The amplitude can be presented in compact form thanks to the use of analytic reconstruction techniques, based on finite-field and p-adic evaluations, multivariate partial fraction decompositions, and primary decompositions to identify common numerator factors. Although full analytic results are given in the text and in the supplementary material, the main thrust of this paper is to further test and illustrate these analytic reconstruction techniques in a concrete physical example. Our results provide a compact and efficient representation of the matrix element for this process, enabling evaluations that are more than an order of magnitude faster than existing numerical alternatives. Full analytic control of the leading-order, loop-induced amplitude is an important step towards handling more complex 2-loop or real-radiation corrections to this and related processes.

Campbell, John M. [Fermilab] (ORCID:00000002136193↗

Soft evolution of multi-jet final states

We present a new framework for computing resummed and matched distributions in processes with many hard QCD jets. The intricate color structure of soft gluon emission at large angles renders resummed calculations highly non-trivial in this case. We automate all ingredients necessary for the color evolution of the soft function at next-to-leading-logarithmic accuracy, namely the selection of the color bases and the projections of color operators and Born amplitudes onto those bases. Explicit results for all QCD processes with up to 2 → 5 partons are given. We also devise a new tree-level matching scheme for resummed calculations which exploits a quasi-local subtraction based on the Catani-Seymour dipole formalism. We implement both resummation and matching in the Sherpa event generator. As a proof of concept, we compute the resummed and matched transverse-thrust distribution for hadronic collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Two-particle angular correlations in e + e - collisions to hadronic final states in two reference coordinates at Belle

We present the analysis of two-particle angular correlations using coordinate systems defined with the conventional beam axis and the event thrust axis. We propose the latter as a good representation for the correlation structure interpretation in the e + e - collision system. The e + e - collisions to hadronic final states at center-of-mass energies of $\sqrt{s}$ = 10.52 GeV and 10.58 GeV are recorded by the Belle detector at KEKB. In this paper, results on the first dataset are supplementary to the previous Belle publication [1]. At the same time, the latter is the first two-particle correlation measurement at collision energy on the Υ(4S) resonance and is sensitive to its decay products. Measurements are reported as a function of the charged-particle multiplicity. Finally, a qualitative understanding of the correlation structure is discussed using a combination of Monte Carlo simulations and experimental data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The efficacy of event isotropy as an event shape observable

Event isotropy $\mathcal{I}$ sph , an event shape observable that measures the distance of a final state from a spherically symmetric state, is designed for new physics signals that are far from QCD-like. Using a new technique for producing a wide variety of signals that can range from near-spherical to jetty, we compare event isotropy to other observables. We show that thrust T and the C parameter (and λ max , the largest eigenvalue of the sphericity matrix) are strongly correlated and thus redundant, to a good approximation. By contrast, event isotropy adds considerable information, often serving to break degeneracies between signals that would have almost identical T and C distributions. Signals with broad distributions in T (or λ max ) and in $\mathcal{I}$ sph separately often have much narrower distributions, and are more easily distinguished, in the ($\mathcal{I}$ sph , λ max ) plane. An intuitive, semi-analytic estimation technique clarifies why this is the case and assists with the interpretation of the distributions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First subleading power resummation for event shapes

We derive and analytically solve renormalization group (RG) equations of gauge invariant non-local Wilson line operators which resum logarithms for event shape observables τ at subleading power in the τ « 1 expansion. These equations involve a class of universal jet and soft functions arising through operator mixing, which we call θ-jet and θ-soft functions. An illustrative example involving these operators is introduced which captures the generic features of subleading power resummation, allowing us to derive the structure of the RG to all orders in αs, and provide field theory definitions of all ingredients. As a simple application, we use this to obtain an analytic leading logarithmic result for the subleading power resummed thrust spectrum for H → gg in pure glue QCD. This resummation determines the nature of the double logarithmic series at subleading power, which we find is still governed by the cusp anomalous dimension. We check our result by performing an analytic calculation up to O(α$3\atop{s}$). Consistency of the subleading power RG relates subleading power anomalous dimensions, constrains the form of the θ-soft and θ-jet functions, and implies an exponentiation of higher order loop corrections in the subleading power collinear limit. Our results provide a path for carrying out systematic resummation at subleading power for collider observables.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A robust measure of event isotropy at colliders

We introduce a new event shape observable — event isotropy — that quantifies how close the radiation pattern of a collider event is to a uniform distribution. This observable is based on a normalized version of the energy mover’s distance, which is the minimum “work” needed to rearrange one radiation pattern into another of equal energy. We investigate the utility of event isotropy both at electron-positron colliders, where events are compared to a perfectly spherical radiation pattern, as well as at proton-proton colliders, where the natural comparison is to either cylindrical or ring-like patterns. Compared to traditional event shape observables like sphericity and thrust, event isotropy exhibits a larger dynamic range for high-multiplicity events. This enables event isotropy to not only distinguish between dijet and multijet processes but also separate uniform N-body phase space configurations for different values of N. As a key application of this new observable, we study its performance to characterize strongly-coupled new physics scenarios with isotropic collider signatures.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Toward multi-differential cross sections: measuring two angularities on a single jet

The analytic study of differential cross sections in QCD has typically focused on individual observables, such as mass or thrust, to great success. Here, we present a first study of double differential jet cross sections considering two recoil-free angularities measured on a single jet. By analyzing the phase space defined by the two angularities and using methods from soft-collinear effective theory, we prove that the double differential cross section factorizes at the boundaries of the phase space. We also show that the cross section in the bulk of the phase space cannot be factorized using only soft and collinear modes, excluding the possibility of a global factorization theorem in soft-collinear effective theory. Nevertheless, we are able to define a simple interpolation procedure that smoothly connects the factorization theorem at one boundary to the other. We present an explicit example of this at next-to-leading logarithmic accuracy and show that the interpolation is unique up to α s 4 order in the exponent of the cross section, under reasonable assumptions. This is evidence that the interpolation is sufficiently robust to account for all logarithms in the bulk of phase space to the accuracy of the boundary factorization theorem. We compare our analytic calculation of the double differential cross section to Monte Carlo simulation and find qualitative agreement. Because our arguments rely on general structures of the phase space, we expect that much of our analysis would be relevant for the study of phenomenologically well-motivated observables, such as N -subjettiness, energy correlation functions, and planar flow.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Precision e + e − hemisphere masses in the dijet region with power corrections

We derive high-precision results for the e + e − heavy jet mass (HJM) dσ/dρ and dihemisphere mass (DHM) d 2 σ/(ds 1 ds 2 ) distributions, for s 1 ~ s 2 , in the dijet region. New results include: i) the N 3 LL resummation for HJM of large logarithms ln n (ρ) at small ρ including the exact two-loop non-global hemisphere soft function, the 4-loop cusp anomalous dimension and the 3-loop hard and jet functions, ii) N 3 LL results for DHM with resummation of logarithms ln(s 1,2 /Q 2 ) when there is no large separation between s 1 and s 2 , iii) profile functions for HJM to give results simultaneously valid in the peak and tail regions, iv) a complete two-dimensional basis of non-perturbative functions which can be used for double differential observables, that are needed for both HJM and DHM in the peak region, and v) an implementation of renormalon subtractions for large-angle soft radiation to $\mathcal{O}$ (α$^{3}_{s}$) together with a resummation of the additional large ln(Qρ/Λ QCD ) logarithms. Here Q is the e + e − center-of-mass energy. Our resummation results are combined with known fixed-order $\mathcal{O}$ (α$^{3}_{s}$) results and we discuss the convergence and remaining perturbative uncertainty in the cross section. We also prove that, at order 1/Q, the first moment of the HJM distribution involves an additional non-perturbative parameter compared to the power correction that shifts the tail of the spectrum (where 1 ≫ ρ ≫ Λ QCD /Q). This differs from thrust where a single non-perturbative parameter at order 1/Q describes both the first moment and the tail, and it disfavors models of power corrections employing a single non-perturbative parameter, such as the low-scale effective coupling model. In this paper we focus only on the dijet region, not the far-tail distribution for ρ ≳ 0.2 beyond which the trijet factorization and resummation become important.

Factorization↗

Renormalons in the energy-energy correlator

The energy-energy correlator (EEC) is an observable of wide interest for collider physics and Standard Model measurements, due to both its simple theoretical description in terms of the energy-momentum tensor and its novel features for experimental studies. Significant progress has been made in both applications and higher-order perturbative predictions for the EEC. Here, we analyze the nature of the asymptotic perturbative series for the EEC by determining its analytic form in Borel space under the bubble-sum approximation. This result provides information on the leading and subleading nonperturbative power corrections through renormalon poles. We improve the perturbative convergence of the $\overline{MS}$ series for the EEC by removing its leading renormalon using an MSR scheme, which is independent of the bubble-sum approximation. Using the leading MSR scheme power correction determined by fits to thrust, we find good agreement with EEC OPAL data already at O(α$^{2}_{s}$).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Transverse Λ polarization in e + e – processes within a TMD factorization approach and the polarizing fragmentation function

We perform a re-analysis of Belle data for the transverse Λ and Λ¯ polarization in e + e – annihilation processes within a transverse momentum dependent (TMD) factorization approach. We consider two data sets, one referring to the associated production of Λ’s with a light unpolarized hadron in an almost back-to-back configuration, and one for the inclusive Λ production, with the reconstruction of the thrust axis. We adopt the Collins-Soper-Sterman framework and employ the recent formulation on the factorization of single-inclusive hadron production. This extends a previous phenomenological study carried out in a more simplified TMD approach, leading to a new extraction of the polarizing fragmentation function (FF). While confirming several features of the previous analysis, here we include the proper QCD scale dependence of this TMD FF and carefully exploit the role of its nonperturbative component. Here, the compatibility, within a unique TMD factorization scheme, of double and single-inclusive hadron production is discussed in detail. Moreover, we consider another data set for inclusive Λ production, at much larger energies, from the OPAL Collaboration, in order to test the consistency of the entire approach. Finally, we elaborate on some fundamental issues like the role of SU(2) isospin symmetry and the heavy quark contributions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗