Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Long-Lived In-Situ Solar System Explorer (LLISSE): Potential Contributions to the Next Decade of Solar System Exploration

Venus, while having similar size, mass, and location in the solar system to Earth, varies from Earth in many ways and holds many scientific mysteries despite many missions that have focused on it in the past. Primary differences include Venus' climate, atmosphere, and perhaps most notably the extreme surface conditions. The layers of sulfuric acid clouds and high pressure CO2 laden atmosphere make remote sensing at Venus much less effective than at other solar system bodies. In addition, surface conditions present formidable engineering challenges due to the high temperature, pressure, and reactive chemistry. To date, landed missions have not been able to last more than about 2 hours on the surface [1]. This has resulted in significant knowledge gaps about the surface conditions of this important body in the solar system. The science community has effectively no in-situ temporal data at the Venus surface. These data are critical for the development of a thorough understanding of Venus' weather and the processes by which chemical species interact with each other and are transported throughout the atmospheric column. The LLISSE platform, and its variants, are a foundation for future mission concepts based on a core set of long-lived technologies providing significant new science as well as demonstrating new technical capabilities. After completion, LLISSE has the potential to be a complimentary element to missions going to Venus and would provide unique and important science to missions whether they be orbiters or short duration landers.

Kremic, Tibor↗
NASA NTRS2019

Long-Lived In-Situ Solar System Explorer (LLISSE)

Venus, while having similar size, mass, and location in the solar system to Earth, varies from Earth in many ways and holds many scientific mysteries despite many missions that have focused on it in the past. Primary differences include Venus' climate, atmosphere, and perhaps most notably the extreme surface conditions. The layers of sulfuric acid clouds and high pressure CO2 laden atmosphere make remote sensing at Venus much less effective than at other solar system bodies. In addition, surface conditions present formidable engineering challenges due to the high temperature, pressure, and reactive chemistry. To date, landed missions have not been able to last more than about 2 hours on the surface [1]. This has resulted in significant knowledge gaps about the surface conditions of this important body in the solar system. The science community has effectively no in-situ temporal data at the Venus surface. These data are critical for the development of a thorough understanding of Venus' weather and the processes by which chemical species interact with each other and are transported throughout the atmospheric column. The LLISSE platform, and its variants, are a foundation for future mission concepts based on a core set of long-lived technologies providing significant new science as well as demonstrating new technical capabilities. After completion, LLISSE has the potential to be a complimentary element to missions going to Venus and would provide unique and important science to missions whether they be orbiters or short duration landers.

Kremic, Tibor↗
NASA NTRS2018

Thermal Analysis of Propulsion Components for the Europa Clipper Mission

This presentation describes the thermal analysis and model development that occurred for selected components on the propulsion module subsystem of the Europa Clipper mission, which will fly to Jupiter's icy moon Europa and collect science data from orbit. An overview of a bipropellant system is given, as well as a description of a typical thermal propulsion design. A comparison is also provided, describing the unique Europa Clipper thermal design, which is atypical in many respects. The engine thermal model development is also discussed, including hot-firing tests with nozzle convection correlation, as well as thermal vacuum tests to measure and correlate the emissivity of critical nozzle surfaces. A description of engine firing, as well as valve soak back, is also provided, including temperature maps and results of engine cases. A summary is also provided, of lessons learned regarding thermal propulsion considerations.

propulsion module subsystem↗
NASA NTRS1975

Applications of Computer Graphics in Engineering

Various applications of interactive computer graphics to the following areas of science and engineering were described: design and analysis of structures, configuration geometry, animation, flutter analysis, design and manufacturing, aircraft design and integration, wind tunnel data analysis, architecture and construction, flight simulation, hydrodynamics, curve and surface fitting, gas turbine engine design, analysis, and manufacturing, packaging of printed circuit boards, spacecraft design.

Source record↗
NASA NTRS2012

Jet-Surface Interaction Test: Far-Field Noise Results

Many configurations proposed for the next generation of aircraft rely on the wing or other aircraft surfaces to shield the engine noise from the observers on the ground. However, the ability to predict the shielding effect and any new noise sources that arise from the high-speed jet flow interacting with a hard surface is currently limited. Furthermore, quality experimental data from jets with surfaces nearby suitable for developing and validating noise prediction methods are usually tied to a particular vehicle concept and, therefore, very complicated. The Jet/Surface Interaction Test was intended to supply a high quality set of data covering a wide range of surface geometries and positions and jet flows to researchers developing aircraft noise prediction tools. During phase one, the goal was to measure the noise of a jet near a simple planar surface while varying the surface length and location in order to: (1) validate noise prediction schemes when the surface is acting only as a jet noise shield and when the jet/surface interaction is creating additional noise, and (2) determine regions of interest for more detailed tests in phase two. To meet these phase one objectives, a flat plate was mounted on a two-axis traverse in two distinct configurations: (1) as a shield between the jet and the observer (microphone array) and (2) as a reflecting surface on the opposite side of the jet from the observer.

Brown, Clifford A.↗
NASA NTRS2020

Space Launch Vehicle Transient Particle Redistribution Modeling and Implications for Optically Sensitive Payloads

The performance of contamination sensitive components—such as optical components—can be degraded by particulate matter depositing on the surfaces. Particles can accumulate during manufacturing, handling and operation. For a space-based system, particles can shed from the fairing and redistribute onto sensitive surfaces during launch. An engineering modeling approach has been developed for modeling particle migration during launch. The approach involves particle detachment from the fairing, particle transport through the venting atmosphere inside the fairing, and attachment to the receiving surface. Particle size and amounts on the fairing surface can be modeled using distributions from standards, such as IEST-STD-CC1246E, as well as from empirical data obtained from tape lifts. Surface interactions are modeled using theoretical as well as empirical data. Commercial computational fluid dynamics codes are used to calculate the gas flow in the fairing during depressurization during launch. This approach not only provides insight into particle redistribution during launch but also can be used to establish fairing cleanliness requirements.

Brieda, Lubos↗
NASA NTRS1976

Investigation of upper-surface-blowing nacelle integration at cruise speeds utilizing powered engine simulators

Various overwing nacelle designs were investigated on a representative four engine short haul aircraft configuration during a combined analytical and experimental program. Design conditions were M sub o = 0.7 and C sub L = 0.4. All nacelles had D shaped nozzle exits and included a streamline contoured design, a low boattail angle reference configuration, and a high boattail angle powered lift design. Testing was done with the design four engine airplane configuration as well as with only inboard nacelles installed. Turbopowered engine simulators were used to provide realistic representation of nacelle flows. Performance trends are compared for the various nacelle designs. In addition, comparisons are presented between analytical and experimental pressure distributions and between flow through and powered simulator results.

Meleason, E. T.↗
NASA NTRS1976

Investigation of upper-surface-blowing nacelle integration at cruise speeds utilizing powered engine simulators

Various overwing nacelle designs were investigated on a representative four-engine short-haul aircraft configuration during a combined analytical and experimental program. Design conditions were a Mach number of 0.7 and a lift coefficient of 0.4. All nacelles had D-shaped nozzle exits and included a streamline-contoured design, a low boattail angle reference configuration, and a high boattail angle powered lift design. Testing was done with the design four-engine airplane configuration as well as with only inboard nacelles installed. Turbopowered engine simulators were used to provide realistic representation of nacelle flows. Performance trends are compared for the various nacelle designs. In addition, comparisons are presented between analytical and experimental pressure distributions and between flow-through and powered simulator results.

Meleason, E. T.↗
NASA NTRS1983

Preliminary scramjet design for hypersonic airbreathing missile application

A conceptual design study of a scramjet engine was conducted for a hypersonic surface to air missile (HYSAM). The definition of the engine was based upon the requirements of accelerating the HYSAM from Mach 4 at 20,000 feet to Mach 6 at 100,000 feet and the cruise conditions at Mach 6. The resulting external and internal environmental conditions were used by various engineering disciplines performing design, stress and heat transfer analysis. A detailed structural analysis was conducted along with an indepth thermal analysis. Structurally all the components within the system exhibit positive margins of safety. A feasible concept was defined which uses state-of-the-art materials and existing TMC technology. The engine basically consists of a three dimensional carbon/carbon combustor/nozzle secured to an FS-85 columbium inlet. The carbon/carbon liner is sheathed with carbon felt insulation to thermally protect the FS-85 structure and skin. The thermal analysis of the engine indicates that a thermally viable configuration exists.

Carlson, C. H.↗
NASA NTRS1983

Stagnation-point ablation of carbonaceous flat disks. I Theory

The process of ablation is calculated for the stagnation region of a flat disk in a radiation-dominated, massive-blowing environment produced in a ballistic range filled with argon. Flow environments are determined by solving the boundary-layer equations while radiative transfer is calculated through a line-by-line spectral computation. The resulting wall heat-transfer rates are coupled with an existing material's response code to determine surface recession and char thickness. The calculation is performed for six 5-cm-diam models made of carbon-phenolic and carbon-carbon composite launched in the Track-G facility at the Arnold Engineering Development Center. Significant surface recessions are predicted to occur for these models due mostly to radiative heating.

Park, C.↗
NASA NTRS1994

Electromagnetic-Repulsion Systems For Deicing Aircraft

Improved eddy-current electromagnetic-repulsion deicing systems developed for use on variety of exterior aircraft surfaces like leading edges of wings, engine inlets, propellers, and helicopter rotors. Fit to exterior surfaces, as retrofits or original equipment. Systems light in weight, consume little average power, and capable of protecting against severe icing conditions.

Smith, Samuel O.↗
NASA NTRS2008

Descent Assisted Split Habitat Lunar Lander Concept

The Descent Assisted Split Habitat (DASH) lunar lander concept utilizes a disposable braking stage for descent and a minimally sized pressurized volume for crew transport to and from the lunar surface. The lander can also be configured to perform autonomous cargo missions. Although a braking-stage approach represents a significantly different operational concept compared with a traditional two-stage lander, the DASH lander offers many important benefits. These benefits include improved crew egress/ingress and large-cargo unloading; excellent surface visibility during landing; elimination of the need for deep-throttling descent engines; potentially reduced plume-surface interactions and lower vertical touchdown velocity; and reduced lander gross mass through efficient mass staging and volume segmentation. This paper documents the conceptual study on various aspects of the design, including development of sortie and outpost lander configurations and a mission concept of operations; the initial descent trajectory design; the initial spacecraft sizing estimates and subsystem design; and the identification of technology needs

Mazanek, Daniel D.↗
NASA NTRS1983

Empennage/afterbody integration for single and twin-engine fighter aircraft

An extensive experimental program to determine the effects of empennage surfaces on single and twin-engine afterbody/nozzle drag has been conducted by the Propulsion Aerodynamics Branch at the NASA Langley Research Center. Empennage interference drag was obtained by using experimental values of afterbody/nozzle drag and computed values of empennage drag. The effects of tail location, span, number (single versus twin), toe angle, cant angle, camber and root chord length are discussed. The magnitude of empennage interference drag on single and twin engine configurations is examined.

Berrier, B. L.↗
NASA NTRS1977

Iceproofing Helicopters

NASA aircraft-icing research has been applied to expand the utility of the big flying-crane helicopter built by the Sikorsky Aircraft Division of United Technologies in Stratford, Conn. Sikorsky wanted to adapt the Skycrane, used in both military and commercial service, to lift heavy external loads in areas where icing conditions occur; ice build-up around the engine air inlets caused the major problem. NASA-Lewis has a special wind tunnel for injecting super cooled water droplets into the wind thereby simulating a natural icing cloud and observing how ice builds up on various shaped surfaces. From Lewis, Sikorsky engineers obtained information which optimized the design of the inlet anti-ice system. The resulting design proved to be an effective anti-icing modification for the flying crane. Sikorsky is also using additional Lewis Icing Research Tunnel data in its development of a new VTOL (Vertical Take-Off and Landing) aircraft.

Source record↗
NASA NTRS1991

Dynamics and control of hypersonic vehicles - The integration challenge for the 1990's

The dynamic characteristics of hypersonic vehicles are reviewed, with special attention to the interactions between the airframe, engine, and structural dynamics. Based on a preliminary investigation of the dynamics of a generic vehicle configuration similar to the X-30 with Scramjet propulsion, an assessment of these interactions is presented. The control effectors include aerodynamic pitch-control surfaces, as well as engine fuel flow and diffuser area ratio. The study configuration is statically instable in pitch, and exhibits strong airframe/engine/elastic coupling in the attitude dynamics and engine responses. This strong coupling will require a highly integrated airframe-engine control system, and the performance of the attitude control system will be contingent upon the ability to adequately deal with the structural aeroelastic response and engine dynamics.

Schmidt, David K.↗