Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

An ab initio based full-dimensional potential energy surface for OH + O 2 ⮂ HO 3 and low-lying vibrational levels of HO 3

To offer an in-depth understanding of the HO 3 radical and its dissociation to OH + O 2 , a six-dimensional potential energy surface (PES) has been constructed by fitting 2087 energy points for the electronic ground state of HO 3 (X 2 A") using the permutation invariant polynomial-neural network (PIP-NN) approach. The energy points were calculated using an explicitly-correlated and Davidson-corrected multi-reference configuration interaction approach with the correlation-consistent polarized valence double zeta basis (MRCI( Q )-F12/VDZ-F12). On the PES, the trans -HO 3 isomer is found to be the global minimum, 33.0 cm -1 below the cis -HO 3 conformer, which is consistent with previous high-level theoretical investigations. The dissociation to the OH + O 2 asymptote from both conformers is shown to be barrierless. As a benchmark from a recently developed high-accuracy thermochemistry protocol, D 0 for trans -HO 3 is calculated to be 2.29 ± 0.36 kcal mol -1 , only slightly deeper than the value of 2.08 kcal mol -1 obtained using the PES, and in reasonable agreement with the experimentally estimated value of 2.93 ± 0.07 kcal mol -1 . Using this PES, low-lying vibrational energy levels of HO 3 are determined using an exact quantum Hamiltonian and compared with available experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A New Global Potential Energy Surface for the Hydroperoxyl Radical, HO2: Reaction Coefficients for H + O2 and Vibrational Splittings for H Atom Transfer

A new analytic global potential energy surface describing the hydroperoxyl radical system H((sup 2)S) + O2(X (sup 3)Sigma((sup -)(sub g))) (reversible reaction) HO2 ((X-tilde) (sup 2)A'') (reversible reaction) O((sup 3)P) + O H (X (sup 2)Pi) has been fitted using the ab initio complete active space SCF (self-consistent-field)/externally contracted configuration interaction (CASSCF/CCI) energy calculations of Walch and Duchovic. Results of quasiclassical trajectory studies to determine the rate coefficients of the forward and reverse reactions at combustion temperatures will be presented. In addition, vibrational energy levels were calculated using the quantum DVR-DGB (discrete variable representation-distributed Gaussian basis) method and the splitting due to H atom migration is investigated. The material of the proposed presentation was reviewed and the technical content will not reveal any information not already in the public domain and will not give any foreign industry or government a competitive advantage.

Dateo, Christopher E.↗

Potential Energy Surface of Methanol Decomposition on Cu(110)

Combining the dimer saddle point searching method and periodic density functional theory calculations, the potential energy surface of methanol decomposition on Cu(110) has been mapped out. Each elementary step in the methanol decomposition reaction into CO and hydrogen occurs via one of three possible mechanisms: O-H, C-H or C-O bond scission. Multiple reaction pathways for each bond scission have been identified in the present work. Reaction pathway calculations were started from an initial (reactant) state with methanol adsorbed in the most stable geometry on Cu(110). The saddle point and corresponding final state of each reaction or diffusion mechanism were determined without assuming the reaction mechanism. In this way, the reaction paths are determined without chemical intuition. The harmonic pre-exponential factor of each identified reaction is calculated from a normal mode analysis of the stationary points. Then, using harmonic transition state theory, the reaction rate of each identified reaction pathway in the entire reaction network is obtained. The most favorable decomposition route for methanol on Cu(110) is found as follows: . The rate-limiting step in this route is the dehydrogenation of methoxy to formaldehyde. Our calculation results are in agreement with previous experimental observations and results. This work was supported by a Laboratory Directed Research and Development (LDRD) project of the Pacific Northwest National Laboratory (PNNL). The computations were performed using the Molecular Science Computing Facility in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL), which is a U.S. Department of Energy national scientific user facility located at PNNL in Richland, Washington.

08 HYDROGEN↗

Arctic Summer Airmass Transformation, Surface Inversions, and the Surface Energy Budget

During the Arctic Clouds in Summer Experiment (ACSE) in summer 2014 a weeklong period of warm-air advection over melting sea ice, with the formation of a strong surface temperature inversion and dense fog, was observed. Based on an analysis of the surface energy budget, we formulated the hypothesis that, because of the airmass transformation, additional surface heating occurs during warm-air intrusions in a zone near the ice edge. To test this hypothesis, we explore all cases with surface inversions occurring during ACSE and then characterize the inversions in detail. We find that they always occur with advection from the south and are associated with subsidence. Analyzing only inversion cases over sea ice, we find two categories: one with increasing moisture in the inversion and one with constant or decreasing moisture with height. During surface inversions with increasing moisture with height, an extra 10–25 W m −2 of surface heating was observed, compared to cases without surface inversions; the surface turbulent heat flux was the largest single term. Cases with less moisture in the inversion were often cloud free and the extra solar radiation plus the turbulent surface heat flux caused by the inversion was roughly balanced by the loss of net longwave radiation.

54 ENVIRONMENTAL SCIENCES↗

Sea ice-atmospheric interaction: Application of multispectral satellite data in polar surface energy flux estimates

This is the third annual report on: Sea Ice-Atmosphere Interaction - Application of Multispectral Satellite Data in Polar Surface Energy Flux Estimates. The main emphasis during the past year was on: radiative flux estimates from satellite data; intercomparison of satellite and ground-based cloud amounts; radiative cloud forcing; calibration of the Advanced Very High Resolution Radiometer (AVHRR) visible channels and comparison of two satellite derived albedo data sets; and on flux modeling for leads. Major topics covered are arctic clouds and radiation; snow and ice albedo, and leads and modeling.

Steffen, Konrad↗

Theoretical characterization of the potential energy surface for H + O2 yields HO2(asterisk) yields HO + O. II - The potential for H atom exchange in HO2

The results of CASSCF multireference contracted CI calculations with large ANO basis sets are presented for the exchange region of the HO2 potential-energy surface. The saddle point for H atom exchange is about 13 kcal/mol below the energy of H + O2; therefore, this region of the surface should be accessible during H + O2 recombination and methathesis reactions.

Walch, Stephen P.↗

A new diabatic representation of the coupled potential energy surfaces for Na(3p P-2) + H2 yields Na(3s S-2) + H2 or NaH + H

A diabatic representation is presented of the coupled potential-energy surfaces for Na(3p P-2) + H2 yields Na (3s S-2) + H2 or NaH + H. The representation is designed to yield, upon diagonalization, realistic values for the two lowest energy adiabatic states at both asymptotes of the chemical reaction as well as near the conical intersection in the three-body interaction region. It is economical to evaluate and portable. It is suitable for dynamics calculations on both the quenching process and the electronically nonadiabatic chemical reaction.

Halvick, Philippe↗

Effects of Surface Energy on Adhesive Strength of Sylgard [Slides]

Previous tests showed large variation in measured separation load. Large variation may be attributed to the surface preparation. Surface preparation will be characterized by measuring the free surface energy of the adherents prior to sample assembly.

36 MATERIALS SCIENCE↗

Calculations of H2O microwave line broadening in collisions with He atoms - Sensitivity to potential energy surfaces

Theoretical computations of broadening parameters are reported for three microwave lines of H2O in a bath of He atoms. The potential-energy surfaces employed are corrected for basis-set superposition error, and their reliability is checked by repeating the calculations with a different basis set for orbital expansion. The results are presented in extensive tables and discussed in detail. The corrections applied are shown to have a significant impact on the accuracy of the room-temperature broadenings determined: 8.9 sq A for the 22.2-GHz line, 11.8 sq A for the 183,3-GHz line, and 10.0 sq A for the 380.2-GHz line, in good agreement with published experimental data. The importance of collisional broadening for the atmospheric transmission of radiation and for remote-sensing applications is indicated.

Green, Sheldon↗

Quantal Study of the Exchange Reaction for N + N2 using an ab initio Potential Energy Surface

The N + N2 exchange rate is calculated using a time-dependent quantum dynamics method on a newly determined ab initio potential energy surface (PES) for the ground A" state. This ab initio PES shows a double barrier feature in the interaction region with the barrier height at 47.2 kcal/mol, and a shallow well between these two barriers, with the minimum at 43.7 kcal/mol. A quantum dynamics wave packet calculation has been carried out using the fitted PES to compute the cumulative reaction probability for the exchange reaction of N + N2(J=O). The J - K shift method is then employed to obtain the rate constant for this reaction. The calculated rate constant is compared with experimental data and a recent quasi-classical calculation using a LEPS PES. Significant differences are found between the present and quasiclassical results. The present rate calculation is the first accurate 3D quantal dynamics study for N + N2 reaction system and the ab initio PES reported here is the first such surface for N3.

Wang, Dunyou↗

Use of scaled external correlation, a double many-body expansion, and variational transition state theory to calibrate a potential energy surface for FH2

New ab initio results and a double many-body expansion formalism have been used to parameterize a new FH2 potential energy surface with improved properties near the saddle point and in the region of long-range attraction. The functional form of the new surface includes dispersion forces by a double many-body expansion. Stationary point properties for the new surface are calculated along with the product-valley barrier maxima of vibrationally adiabatic potential curves for F + H2 - HF(nu-prime = 3) + H, F + HD - HF(nu-prime = 3) + D, and F + D2 - DF(nu-prime = 4) + D. The new surface should prove useful for studying the effect on dynamics of a low, early barrier with a wide, flat bend potential.

Lynch, Gillian C.↗

State-to-state quantum wave packet dynamics of the LiH + H reaction on two AB initio potential energy surfaces

The dynamics and kinetics of the LiH + H reaction have been studied by using an accurate quantum reactive time-dependent wave packet method on the ab initio ground electronic state potential energy surfaces (PES) developed earlier. Reaction probabilities for the two possible reaction channels, the LiH + H→ H{sub 2} + Li depletion process and the LiH + H→H + LiH hydrogen exchange reaction, have been calculated from 1 meV up to 1.0 eV collision energies for total angular momenta J from 0 to 80. State-to-state and total integral cross sections for the LiH-depletion and H-exchange channels of the reaction have been calculated over this collision energy range. It is found that the LiH-depletion channel is dominant in the whole range of collision energies for both PESs. Accurate total rate coefficients have been calculated on both surfaces from 100 K to 2000 K and are significantly larger than previous empirical estimates and previous J-shifting results. In addition, the present accurate calculations present noticeable differences with previous calculations using the centrifugal sudden approximation.

74 ATOMIC AND MOLECULAR PHYSICS↗

Quantum dynamics study on the CHIPR potential energy surface for the hydroperoxyl radical: The reactions O + OH⇋O{sub 2} + H

Quantum scattering calculations of the O({sup 3}P)+OH({sup 2}Π)⇌O{sub 2}({sup 3}Σ{sub g}{sup −})+H({sup 2}S) reactions are presented using the combined-hyperbolic-inverse-power-representation potential energy surface [A. J. C. Varandas, J. Chem. Phys. 138, 134117 (2013)], which employs a realistic, ab initio-based, description of both the valence and long-range interactions. The calculations have been performed with the ABC time-independent quantum reactive scattering computer program based on hyperspherical coordinates. The reactivity of both arrangements has been investigated, with particular attention paid to the effects of vibrational excitation. By using the J-shifting approximation, rate constants are also reported for both the title reactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum Chemical Calculations of the Cl- + CH3I → CH3Cl + I- Potential Energy Surface

Electronic structure theory calculations, using MP2 theory and the DFT functionals OPBE, OLYP, HCTH407, BhandH, and B97-1, were performed to characterize the structures, vibrational frequencies, and energies for stationary points on the Cl- + CH3I → ClCH3 + I- potential energy surface. The aug-cc-pVDZ and aug-cc-pVTZ basis sets, with an effective core potential (ECP) for iodine, were employed. Single-point CCSD(T) calculations were performed to obtain the complete basis set (CBS) limit for the reaction energies. DFT was found to give significantly longer halide ion/carbon atom bond lengths for the ion-dipole complexes and central barrier transition state, than MP2. BhandH, with either the aug-cc-pVDZ and aug-cc-pVTZ basis sets, gives good agreement with the experimental structures for both CH3I and CH3Cl. The frequencies of CH3I and CH3Cl, obtained with the different level of theory and basis sets, are in excellent agreement with experiment. The major difference between the MP2 and DFT frequencies is for the imaginary frequency of the central barrier. Using the aug-cc-pVTZ basis the MP2 value for this frequency ranges from 1.26 - 1.59 times larger than those for the DFT functional. Thus, the MP2 and DFT theories have different PES shapes in the vicinity of the [Cl--CH3--I]- central barrier. The CCSD(T)/CBS energies are in good agreement with experiments for the complexation energies and reaction exothermicity, with a small 1 kcal/mol difference for the latter. The CCSD(T)/CBS central barrier height is lower than values deduced by using statistical theoretical models to fit the Cl- + CH3I → ClCH3 + I- experimental rate constant, which is consistent with the expected non-statistical dynamics for the reaction. The BhandH energies are in overall best agreement with the CCSD(T) values, with a largest difference of only 0.7 kcal/mol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Benchmark Electronic Structure Calculations for H 3 O + (H 2 O) n , n = 0–5, Clusters and Tests of an Existing 1,2,3-Body Potential Energy Surface with a New 4-Body Correction

We report a revision of a previously developed many-body (up to 3-body inter- actions) CCSD(T)-based potential energy surface (PES) for the hydrated proton and its extension that incorporates a simple 4-body term for the hydronium-water-water-water interactions. The new PES is parametrized from and tested against new extensive benchmark CCSD(T) Complete Basis Set (CBS) estimates of the binding energies of H3O+(H2O)n clusters, n=0-5, which include all known to date low-lying energy isomers. We report the energetics, structures and harmonic frequencies of the hydronium-water clusters using the PES and compare them against the new benchmarks as well as other best available ab initio results. This critical comparison demonstrates the high accuracy of the new many-body hydronium-water PES.

Heindel, Joseph P.↗

A finite-element visualization of quantum reactive scattering. II. Nonadiabaticity on coupled potential energy surfaces

This is the second in a series of papers detailing a MATLAB based implementation of the finite element method applied to collinear triatomic reactions. Here, we extend our previous work to reactions on coupled potential energy surfaces. The divergence of the probability current density field associated with the two electronically adiabatic states allows us to visualize in a novel way where and how nonadiabaticity occurs. A two-dimensional investigation gives additional insight into nonadiabaticity beyond standard one-dimensional models. We study the F({sup 2}P) + HCl and F({sup 2}P) + H{sub 2} reactions as model applications. Our publicly available code (http://www2.chem.umd.edu/groups/alexander/FEM) is general and easy to use.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗