Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spectroscopic methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Surface reservoirs dominate dynamic gas-surface partitioning of many indoor air constituents

Human health is affected by indoor air quality. One distinctive aspect of the indoor environment is its very large surface area that acts as a poorly characterized sink and source of gas-phase chemicals. In this work, air-surface interactions of 19 common indoor air contaminants with diverse properties and sources were monitored in a house using fast-response, on-line mass spectrometric and spectroscopic methods. Enhanced-ventilation experiments demonstrate that most of the contaminants reside in the surface reservoirs and not, as expected, in the gas phase. They participate in rapid air-surface partitioning that is much faster than air exchange. Phase distribution calculations are consistent with the observations when assuming simultaneous equilibria between air and large weakly polar and polar absorptive surface reservoirs, with acid-base dissociation in the polar reservoir. Chemical exposure assessments must account for the finding that contaminants that are fully volatile under outdoor air conditions instead behave as semivolatile compounds indoors.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Determination of the Mode of Occurrence of V, Fe, and Mn in Slags and Charge of Vanadium Production by X-Ray Spectroscopy

Samples of technogenic raw materials are studied by spectroscopic methods. The chemical composition of a roast slag and a charge of vanadium production is analyzed by the X-ray fluorescence method (XRF). The possibilities of X-ray photoelectron spectroscopy are studied for determination of the oxidation state of elements in technogenic raw materials. It is found that ~30% of V occurs in the slag as V(III), whereas, in the charge, the content of V(V) and V(IV) is ~80 and 20%, respectively; no V compounds with the lowest oxidation states are found. Iron in the slag and charge samples is present as Fe{sub 3}O{sub 4}, and Mn mostly occurs as Mn(III). The oxidation state of V in the slag and charge can be determined by the intensity ratio of the K and L lines of the XRF spectra; however, this method is not recommended because of its low accuracy.

36 MATERIALS SCIENCE↗

Optical Spectroscopy and the Structure of Polyfunctional Hydrocarbon Compounds and Oil Products

The optical and physicochemical properties associated with the change (oxidation, thermolysis and photolysis), during the operation, of the spatial and electronic structures of the polyfunctional hydrocarbon compounds, oils, oil products, and N-, O-, and S-containing heteroaromatic compounds and additives, which comprise a variety of fuel and lubricant compositions involved in the structural and phase rearrangements, as well as in the formation of colloidal and micelle aggregates altering the structure with respect to their hydrocarbon, chemical, and fractional compositions, are investigated. The spectroscopic-luminescent properties of the compounds and their ion-radical forms were studied using optical and spectroscopic methods and quantum-chemical calculations when the excitation energy in the full spectra of singlet and triplet (for the ion, quartet and doublet) electronic excited states was deactivated. Intramolecular mechanisms of the hyperfine electron–nucleus interaction between the active groups of quasi-oscillators in the structure of polyfunctional compounds in the paramagnetic states of hydrocarbons, which form the electronic structure of the triplet–triplet transitions induced by pumping in the optical absorption spectra, are studied. It is shown that the mechanism of multistep ionization, fragmentation, and appearance of radicals and the electronic-vibrational mechanism of an increase in the vibration temperature up to T = 6000–7000 K are developed during the action of the ultraviolet (UV) pumping pulse of a nanosecond duration until the light emission, which gives rise to thermolysis and recombination that create the conditions for the combustion and explosion when the excitation energy is localized on a limited number of groups of quasi-oscillators in the structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure analysis of O,O’-propane-1,3-diyl bis[diphenyl(phosphinothioate)]

A new diphosphine disulphide compound with the formula C{sub 27}H{sub 26}O{sub 2}|P{sub 2}S{sub 2}, was synthesized from the reaction between PPh{sub 2}SCl and 1,3-propanediol and characterized with different spectroscopic methods. Its structure has also been studied by X-ray diffraction. The compound crystallizes in the triclinic space group <##> } P } 1 }&#x00AF;<!-- ?? --> $ P/bar 1 $ P 1-bar </##>. Pentavalent phosphorus atoms in the molecule are in distorted tetrahedral environments.

36 MATERIALS SCIENCE↗

Temperature-dependent segregation of Pr{sup 3+} impurity ions in Y{sub 2}SiO{sub 5}:Pr{sup 3+} and YPO{sub 4}:Pr{sup 3+} nanocrystals

Stationary and time-resolved spectroscopic methods are used to show that the impurity ions in Y{sub 2}SiO{sub 5}:Pr{sup 3+} and YPO{sub 4}:Pr{sup 3+} nanocrystals are distributed nonuniformly. This nonuniform distribution is found to be caused by the temperature-dependent segregation of Pr{sup 3+} ions near the surface of a nanocrystal. The motion of the activator ions from the bulk of a nanocrystal to the near-surface layer is traced when the activator concentration and the heat-treatment parameters are varied over wide ranges, and the main parameters of this effect (impurity redistribution intensity and time, diffusion coefficient) are estimated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental studies of the magnetic structure and plasma dynamics in current sheets (a review)

Based on measurements of magnetic fields in current sheets, spatial distributions of the electric current and electrodynamic forces in successive stages of the sheet evolution are determined. Two new effects manifesting themselves mostly in the late stages of the current sheet evolution have been discovered, namely, expansion of the current flow region at the periphery of the sheet and the appearance of a region with inverse currents, which gradually expands from the periphery toward the center of the sheet. Using spectroscopic methods, generation of superthermal plasma flows accelerated along the sheet width from the center toward the periphery has been revealed and investigated. The measured energies of accelerated plasma ions satisfactorily agree with the Ampère forces determined from magnetic measurements. The excitation of inverse currents additionally confirms the motion of high-speed plasma flows from the center of the current sheet toward its side edges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Al{sub x}Ga{sub 1−x}As/GaAs(100) hetermostructures with anomalously high carrier mobility

Structural and spectroscopic methods are used to study the epitaxial layers of n-type Al{sub x}Ga{sub 1−x}As solid solutions produced by the metal-organic chemical vapor deposition method. It is shown that, when Al{sub x}Ga{sub 1−x}As solid solutions are doped with carbon to a level of (1.2–6.7) × 10{sup 17} cm{sup −3}, the electron mobility is anomalously high for the given impurity concentration and twice exceeds the calculated value. It is assumed that the ordered arrangement of carbon in the metal sublattice of the solid solution leads to a change in the average distance between impurity ions, i.e., to an increase in the mean free path of the carriers and, consequently, in the carrier mobility. The observed effect has immediate practical importance in the search for various technological ways of increasing the operating speed of functional elements of modern optoelectronic devices. The effect of the anomalously high carrier mobility in the epitaxial layer of a heteropair opens up new opportunities for the development of new structures on the basis of Al{sub x}Ga{sub 1−x}As compounds.

36 MATERIALS SCIENCE↗

Experimental studies of the effects of atomic ordering in epitaxial Ga{sub x}In{sub 1–} {sub x}P alloys on their optical properties

The properties of epitaxial Ga{sub x}In{sub 1–} {sub x}P alloys with an ordered arrangement of atoms in the crystal lattice are studied by a number of spectroscopic methods. The alloys are grown by metal-organic chemical vapor deposition onto single-crystal GaAs(100) substrates. It is shown that, under conditions of the coherent growth of an ordered Ga{sub x}In{sub 1–} {sub x}P alloy on a GaAs(100) substrate, atomic ordering results in radical modifications of the optical properties of the semiconductor compared to the properties of disordered alloys. Among these modifications are a decrease in the band gap and an increase in the luminescence intensity. From the data of dispersion analysis of the infrared dispersion spectra and from ultraviolet spectroscopy data obtained in the transmittance–reflection mode of measurements, the basic optical characteristics, specifically, the dispersion of the refractive index and the high-frequency permittivity of Ga{sub x}In{sub 1–} {sub x}P alloys with ordering are determined. All of the experimental data are in good agreement with the developed theoretical concepts.

36 MATERIALS SCIENCE↗

Influence of a por-Si Buffer Layer on the Optical Properties of Epitaxial In{sub x}Ga{sub 1 –x}N/Si(111) Heterostructures with a Nanocolumnar Film Morphology

Integrated heterostructures exhibiting a nanocolumnar morphology of the In{sub x}Ga{sub 1 –x}N film are grown on a single-crystal silicon substrate (c-Si(111)) and a substrate with a nanoporous buffer sublayer (por-Si) by molecular-beam epitaxy with the plasma activation of nitrogen. Using a complex of spectroscopic methods of analysis, it is shown that the growth of In{sub x}Ga{sub 1 –x}N nanocolumns on the por-Si buffer layer offer a number of advantages over growth on the c-Si substrate. Raman and ultraviolet spectroscopy data support the inference about the growth of a nanocolumn structure and agree with the previously obtained X-ray diffraction (XRD) data indicative of the strained, unrelaxed state of the In{sub x}Ga{sub 1 –x}N layer. The growth of In{sub x}Ga{sub 1 –x}N nanocolumns on the por-Si layer positively influences the optical properties of the heterostructures. At the same half-width of the emission line in the photoluminescence spectrum, the emission intensity for the heterostructure sample grown on the por-Si buffer layer is ~25% higher than the emission intensity for the film grown on the c-Si substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anisotropy of Giant Nonlinear Magnetoelectric Effects in Hexaferrites with the Magnetoplumbite Structure

We report on the results of investigation of anisotropy of the nonlinear magnetoelectric current effect in M-type hexaferrites with a collinear magnetic ordering at room temperature. It is found that as a result of the passage of a direct electric current in a plane perpendicular to the hexagonal axis of the strontium hexaferrite sample, the saturation magnetization and the anisotropy constant of the material decrease. The change in the magnetic parameters measured using radio spectroscopic methods is found to be proportional to the supplied electric power density; the determined proportionality factors turn out to be several times larger than in the case when the current passes along the axis. We propose a phenomenological theory that explains the observed effects qualitatively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrafast Imaging of Molecules with Electron Diffraction

Photoexcited molecules convert light into chemical and mechanical energy through changes in electronic and nuclear structure that take place on femtosecond timescales. Gas phase ultrafast electron diffraction (GUED) is an ideal tool to probe the nuclear geometry evolution of the molecules and complements spectroscopic methods that are mostly sensitive to the electronic state. GUED is a passive probing tool that does not alter the molecular properties during the probing process and is sensitive to the spatial distribution of charge in the molecule, including both electrons and nuclei. Improvements in temporal resolution have enabled GUED to capture coherent nuclear motions in molecules in the excited and ground electronic states with femtosecond and subangstrom resolution. Here we present the basic theory of GUED and explain what information is encoded in the diffraction signal, review how GUED has been used to observe coherent structural dynamics in recent experiments, and discuss the advantages and limitations of the method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigating the Doping Mechanism of Pyrene Based Methacrylate Functional Conductive Binder in Silicon Anodes for Lithium-Ion Batteries

The doping mechanism of poly (1-pyrenemethyl methacrylate) (PPy) is investigated through electrochemical analytical and spectroscopic method. The performance of PPy as a Si materials binder is studied and compared with that of a commercial available lithium polyacrylate (PAALi) binder. The pyrene moiety consumes lithium ions according to the cyclic voltammogram (CV) measurement, as a doping to the PPy binder. Based on the lithium consumption, PPy based Si/graphite electrode doping is quantified at 1.1 electron/pyrene moiety. Lastly, the PPy binder based electrodes surface are uniform and crack free during lithiation/delithiation, which is revealed through Scanning electron microscope (SEM) imaging.

25 ENERGY STORAGE↗

Casein from Bovine Milk as a Binder for Silicon Based Electrodes

Silicon is a promising anode material for lithium ion batteries due to the high theoretical capacity (∼3600mAh/g). However, silicon-based electrodes face rapid degradation due to the extensive volume variation (∼300%) during the lithiation/delithiation process. Binders used in the electrode fabrication play a crucial role for silicon electrodes since it can reduce the mechanical fracture during the cycling process. Recent investigations suggest that in addition to the importance of the mechanical properties of the binder, the chemical reactions between the binder and the surface of the silicon particles also contribute to stabilization. Further investigations suggest that functionalized small molecules can also modify the surface of silicon particles and stabilize cycling. An inexpensive, environmentally friendly alternative has been investigated as a binder for silicon electrodes. Casein is a milk protein found in bovine milk rich in amine groups and carboxylic acid groups which can form bonds with the silanol groups in silicon. A comparative study conducted between PVDF and Casein as binders have shown that when casein was used as binder, it shows better performance compared to PVDF. Surface morphology and solid electrolyte interphase (SEI) was analyzed using electron microscopy techniques and spectroscopic methods and the results will be discussed.

36 MATERIALS SCIENCE↗

Hybrid time–frequency domain dual-probe coherent anti-Stokes Raman scattering for simultaneous temperature and pressure measurements in compressible flows via spectral fitting

We demonstrate a hybrid time–frequency spectroscopic method for simultaneous temperature/pressure measurements in nonreacting compressible flows with known gas composition. Hybrid femtosecond–picosecond, pure-rotational coherent anti-Stokes Raman scattering (CARS), with two independent, time-delayed probe pulses, is deployed for single-laser-shot measurements of temperature and pressure profiles along an ∼ <#comment/> 5 -mm line. The theory of dual-probe CARS is presented, along with a discussion of the iterative fitting of experimental spectra. Temperature is obtained from spectra acquired with an early, near-collision-free probe time delay ( τ <#comment/> 1 = 0 p s ) and pressure from spectra obtained at probe delays of τ <#comment/> 2 = 150 − <#comment/> 1000 p s , where collisions significantly impact the spectral profile. Unique solutions for temperature and pressure are obtained by iteratively fitting the two spectra to account for small collisional effects observed for the near zero probe delay spectrum. A dual-probe pure-rotational CARS system, in a 1D line-imaging configuration, is developed to demonstrate effectively the simultaneous temperature and pressure profiles recorded along the axial centerline of a highly underexpanded jet. The underexpanded air jet permits evaluation of this hybrid time–frequency domain approach for temperature and pressure measurements across a wide range of low-temperature–low-pressure conditions of interest in supersonic ground-test facilities. Single-laser-shot measurement precisions in both quantities and pressure measurement accuracy are systematically evaluated in the quiet zone upstream of the Mach disk. Precise thermometry approaching 1%−2% is observed in regions of high CARS signal-to-noise ratios. Pressure measurements are optimized at probe time delays where the ratio of the late probe delay to the Raman lifetime exceeds four ( τ <#comment/> 2 / τ <#comment/> R > <#comment/> 4 ). The impact of low-temperature Raman linewidths on CARS pressure measurements is evaluated, and comparisons of CARS pressures obtained with our recent low-temperature pure-rotational Raman linewidth data and extrapolated high-temperature Q -branch linewidths are presented. Considering all measurements with τ <#comment/> 2 / τ <#comment/> R ≥ <#comment/> 4.0 , measured pressures were on average 7.9% of the computed isentropic values with average shot-to-shot deviations representing a combination of instrument noise and fluid fluctuations of 5.0%.

Retter, Jonathan E.↗

Two-dimensional fluorescence spectroscopy of laser-produced plasmas

We use a two-dimensional laser-induced fluorescence spectroscopy technique to measure the coupled absorption and emission properties of atomic species in plasmas produced via laser ablation of solid aluminum targets at atmospheric pressure. Emission spectra from the Al I 394.4 nm and Al I 396.15 nm transitions are measured while a frequency-doubled, continuous-wave, Ti:Sapphire laser is tuned across the Al I 396.15 nm transition. The resulting two-dimensional spectra show the energy coupling between the two transitions via increased emission intensity for both transitions during resonant absorption of the continuous-wave laser at one transition. Time-delayed and gated detection of the emission spectrum is used to isolate the resonantly-excited fluorescence emission from the thermally-excited emission from the plasma. In addition, the tunable continuous-wave laser measures the absorption spectrum of the Al transition with ultra-high resolution after the plasma has cooled, resulting in narrower spectral linewidths than observed in emission spectra. Our results highlight that fluorescence spectroscopy employing continuous-wave laser re-excitation after pulsed laser ablation combines benefits of both traditional emission and absorption spectroscopic methods.

Harilal, Sivanandan S.↗

Coaxial laser absorption and optical emission spectroscopy of high-pressure aluminum monoxide

This work advances laser absorption spectroscopy with measurements of aluminum monoxide (AlO) temperature and column density in extreme pressure ( P > 60 bar) and temperature ( T > 4000 K) environments. Measurements of the AlO A 2 Π i – X 2 Σ + transition are made using a microelectromechanical system, tunable vertical cavity surface emitting laser (MEMS-VCSEL). Simultaneous emission measurements of the AlO B 2 Σ + – X 2 Σ + transition are made along a line of sight that is coaxial with the laser absorption. Absorption temperature fits agree with emission spectra for a T = 3200 K, P = 9 bar case. In cases with T > 4000 K, P > 60 bar, absorption fits match the ambient temperature while emission fits over-estimate it, owing to high optical depths. These data juxtapose passive and active spectroscopic methods and demonstrate the versatility of AlO laser absorption in high-pressure and high-temperature environments where experimental data remain scarce, and engineering models will benefit from refined measurements.

Daniel, K. A.↗

Spectroscopy of Palladium Nanoparticle Synthesis: Tailoring Nanoparticle Growth Parameters for Hydrogen Storage

Using palladium for hydrogen storage requires palladium (Pd) particles exhibiting specific parameters, including surface area, particle size, and particle shape, with increased interest in palladium nanoparticles (Pd NPs). In order to routinely monitor the synthesis of these particles a spectroscopic method is being developed using infrared (IR), Raman, and UV-Vis spectroscopy. By monitoring the production of Pd NPs, the growth of the NPs can be controlled to ensure quality of the product to match the desired finished particle specifications. For the reaction presented, the conversion of the intermediate tetraamminepalladium(II) chloride (PTC) to diamminepalladium(II) chloride (PDC) can influence the Pd NPs properties. This study is first being developed in lab bench scale quantities to allow ultimate control of the Pd NPs.

08 HYDROGEN↗

Designing protein–material interfaces

This article addresses recent advances in using de novo protein design to create coherent interfaces between proteins and inorganic materials, either through protein self-assembly on crystal lattices or through directed nucleation and growth of crystals by protein scaffolds. Inspired by natural protein-crystal interfaces, we focus on a class of designed helical repeat proteins that present a repeating pattern of charged amino acid residues. We describe the use of in situ imaging and spectroscopic methods to investigate both the assembly of these proteins and their ability to direct crystal nucleation and growth. Furthermore, the findings reveal the importance of surface charge, facet-specific binding, solvent organization, and, more generally, the balance of protein-substrate-solvent interactions in determining how organized protein-materials interfaces emerge. Moreover, the results demonstrate the vast potential of protein design in materials science and elucidate the mechanisms by which interactions between biomolecules and inorganic surfaces lead to unique materials and morphologies.

Biomaterials-Proteins↗