Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solar coronal loops”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

HRTS II EUV observations of a solar ephemeral region

HRTS II has been used to observe the EUV emission of a small bipolar magnetic feature or ephemeral region, where strong EUV line enhancement exhibits contrasts (measured relative to the quiet sun) which range from 10 to 70. The substantiality of the Lyman-alpha and C II-O V emission, and the absence of any measurable emission in coronal forbidden lines, sets a temperature range for the loop's active part of the order of 16,000-300,000 K. The use of the ratios of allowed lines as temperature diagnostics yields temperatures that are very near ionization equilibrium temperatures, and the use of chromospheric lines to form a wavelength standard yields absolute velocities ranging in magnitude from zero to 12 km/sec for C IV, N IV, and O V. This flow is interpreted as a siphon flow.

Roussel-Dupre, R.↗

Evidence in Magnetic Clouds for Systematic Open Flux Transport on the Sun

Most magnetic clouds encountered by spacecraft at 1 AU display a mix of unidirectional suprathermal electrons signaling open field lines and counterstreaming electrons signaling loops connected to the Sun at both ends. Assuming the open fields were originally loops that underwent interchange reconnection with open fields at the Sun, we determine the sense of connectedness of the open fields found in 72 of 97 magnetic clouds identified by the Wind spacecraft in order to obtain information on the location and sense of the reconnection and resulting flux transport at the Sun. The true polarity of the open fields in each magnetic cloud was determined from the direction of the suprathermal electron flow relative to the magnetic field direction. Results indicate that the polarity of all open fields within a given magnetic cloud is the same 89% of the time, implying that interchange reconnection at the Sun most often occurs in only one leg of a flux rope loop, thus transporting open flux in a single direction, from a coronal hole near that leg to the foot point of the opposite leg. This pattern is consistent with the view that interchange reconnection in coronal mass ejections systematically transports an amount of open flux sufficient to reverse the polarity of the heliospheric field through the course of the solar cycle. Using the same electron data, we also find that the fields encountered in magnetic clouds are only a third as likely to be locally inverted as not. While one might expect inversions to be equally as common as not in flux rope coils, consideration of the geometry of spacecraft trajectories relative to the modeled magnetic cloud axes leads us to conclude that the result is reasonable.

Crooker, N. U.↗

Characterizing the Background Corona with SDO/AIA

Characterizing the nature of the solar coronal background would enable scientists to more accurately determine plasma parameters, and may lead to a better understanding of the coronal heating problem. Because scientists study the 3D structure of the Sun in 2D, any line-of-sight includes both foreground and background material, and thus, the issue of background subtraction arises. By investigating the intensity values in and around an active region, using multiple wavelengths collected from the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO) over an eight-hour period, this project aims to characterize the background as smooth or structured. Different methods were employed to measure the true coronal background and create minimum intensity images. These were then investigated for the presence of structure. The background images created were found to contain long-lived structures, including coronal loops, that were still present in all of the wavelengths, 131, 171, 193, 211, and 335 A. The intensity profiles across the active region indicate that the background is much more structured than previously thought.

corona↗

Characterizing the True Background Corona with SDO/AIA

Characterizing the nature of the solar coronal background would enable scientists to more accurately determine plasma parameters, and may lead to a better understanding of the coronal heating problem. Because scientists study the 3D structure of the Sun in 2D, any line of sight includes both foreground and background material, and thus, the issue of background subtraction arises. By investigating the intensity values in and around an active region, using multiple wavelengths collected from the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO) over an eight-hour period, this project aims to characterize the background as smooth or structured. Different methods were employed to measure the true coronal background and create minimum intensity images. These were then investigated for the presence of structure. The background images created were found to contain long-lived structures, including coronal loops, that were still present in all of the wavelengths, 193 Angstroms,171 Angstroms,131 Angstroms, and 211 Angstroms. The intensity profiles across the active region indicate that the background is much more structured than previously thought.

Napier, Kate↗

Opacity effects on the radiative losses of coronal loops

This paper presents calculations of radiative losses, which include the effects of geometry and optical depth, that can be used to improve the energy losses in many flux-tube calculations for loops with constant and variable cross sections. The results include the non-LTE ionization state of hydrogen and helium, thus allowing the determination of the ionization energy in the gas and the relative importance of collisional and radiative processes. These calculations show that optical depth effects are important under solar conditions in the temperature range of 8000-40,000 K.

Kuin, N. P. M.↗

The X-ray signature of solar coronal mass

The coronal response to six solar X-ray flares has been investigated. At a time coincident with the projected onset of the white-light coronal mass ejection associated with each flare, there is a small, discrete soft X-ray enhancement. These enhancements (precursors) precede by typically about 20 m the impulsive phase of the solar flare which is dominant by the time the coronal mass ejection has reached an altitude above 0.5 solar radii. Motions of hot X-ray emitting plasma, during the precursors, which may well be a signature of the mass ejection onsets, are identified. Further investigations have also revealed a second class of X-ray coronal transient, during the main phase of the flare. These appear to be associated with magnetic reconnection above post-flare loop systems.

Harrison, R. A.↗

Simultaneous observations of hard X-ray and microwave burst sources in a limb flare

Observations of a flare which occurred just behind the west solar limb on 1981 August 3 are reported. A hard X-ray source (20-30 keV) and a microwave source at 5 GHz were observed simultaneously using the Very Large Array and the hard X-ray telescope aboard the Hinotori spacecraft. Both sources were located in the corona, apparently near the tops of two independent coronal arcades or loops. The source may be composed of many thin filaments unresolved by the VLA observations.

Takakura, T.↗

Collisional damping of surface waves in the solar corona

The damping of surface waves by viscosity and heat conduction is evaluated. For the solar corona, it is found that surface waves dissipate efficiently only if their periods are shorter than a few tens of seconds and only if the background magnetic field is less than about 10 Gauss. Heating of quiet coronal regions is possible if the coronal waves have short periods, but they cannot heat regions of strong magnetic field, such as coronal active region loops.

Gordon, B. E.↗

The impulsive and gradual phases of a solar limb flare as observed from the solar maximum mission satellite

Simultaneous observations of a solar limb flare in the X-ray and ultraviolet regions of the spectrum are presented. Temporal and spectral X-ray observations were obtained for the 25-300 keV range while temporal, spectral, and spatial X-ray observations were obtained for the 30-0.3 keV range. The ultraviolet observations were images with a 10 arcsec spatial resolution in the line of O V and Fe XXI. The hard X-ray and O V data indicate that the impulsive phase began in the photosphere or chromosphere and continued for several minutes as materials was ejected into the corona. Impulsive excitation was observed up to 30,000 km above the solar surface at specific points in the flare loop. The Fe XXI observations indicate a preheating before the impulsive phase and showed the formation of hot post-flare loops. This later formation was confirmed by soft X-ray observations. These observations provide limitations for current flare models and will provide the data needed for initial conditions in modeling the concurrent coronal transient.

Poland, A. I.↗

Coronal heating by resonant (A.C.) and nonresonant (D.C.) mechanisms

The solar coronal heating studies of Ionson (1984) and Heyvaerts and Priest (1984) invoke categorically different mechanisms involving the generation of ac currents, in the case of resonant mechanisms, and dc currents, in the case of nonresonant ones. Attention is presently given to Heyvaerts and Priest's finding that dc heating mechanisms are represented by the m = 0 harmonic of Ionson's unified theory of coronal heating, which is here extended to include all excitation harmonics, including m = 0. The efficiency of dc mechanisms is severely limited by the constraint that the dissipation time be comparable to the correlation time of the convective driver and smaller than the magnetic flux leakage time, suggesting for the solar case that dc processes dominate heating in young, active region loops, while ac ones dominate heating in both active region and large scale loops.

Ionson, J. A.↗

Post-flare loops embedded in a hot coronal fan-like structure

Limb events were demonstrated on the sun in which rising post-flare loops were embedded in hot structures looking in soft X-rays like fans of rays, formed during the flare and extending high into the corona. One of these structures is analyzed and it is suggested that these fans of rays represent temporary ministreamers, along which mass flows into interplanetary space. This suggestion is supported by maps of solar wind density constructed from scintillation measurements.

Svestka, Z.↗

A unified theory of coronal heating

Solar coronal heating mechanisms are analyzed within the framework of a unified theory of heating processes. The theory is based on the standing wave equation of Ionson (1982) for the global current driven by emfs from the convection Beta less than 1. The equation has the same form as a driven LRC equation in which the equivalent inductance is scaled with the coronal loop length. The theory is used to classify various heating mechanisms inside the coronal loops. It is shown that the total global current can be obtained from an integration of the local currents, the degree of coherency between local currents being the dominant factor governing the global current amplitude. Active region loops appear to be heated by electrodynamic coupling to p-mode oscillations in the convection Beta less than 1.

Ionson, J. A.↗

The origins of planar magnetic structures in the solar wind

It is shown that the solar-wind settings of planar magnetic structures (PMSs) are generally inconsistent with their interpretation by Nakagawa et al. (1989) as magnetic loops or tongues resulting from newly emerging magnetic flux in the photosphere. It is suggested that PMS events have two origins: (1) compression and/or draping of preexisting magnetic structures on the leading edge of high-speed streams, especially ahead of coronal mass ejections; and (2) discontinuities near the heliospheric current sheet.

Neugebauer, M.↗

3-D Mapping of the Magnetic Field in the Active Region by the CLASP2.1 Rocket Experiment

Comprehensive magnetic field measurements of the solar atmosphere are crucial for understanding energy transport from the photosphere to the corona and its dissipation. However, observations of the magnetic field in the chromosphere and the upper atmospheric layers above the chromosphere, where the gas pressure dominance changes from (β>1) to magnetic pressure dominance (β<1), are overwhelmingly lacking. Therefore, we have focused on the polarization of ultraviolet radiation emitted from the upper chromosphere and transition layer and have conducted the Japan-U.S.-EU observation rocket experiment CLASP in order to demonstrate its usefulness. In CLASP2.1 conducted on October 8, 2021, scan observations were made at 16 locations in the active region, and Stokes (intensity $I$, linearly polarized $Q$, $U$, circularly polarized $V$) spectra in the 280~nm wavelength range were obtained. Looking at the observed region with AIA 171~{¥AA} on board the SDO satellite, we see that it consists of a region where a structure corresponding to the foot of a high-temperature loop called moss (moss) is seen, and a region where a low-temperature loop spreading from a sunspot is seen. We focused on the ionized magnesium $h$ & $k$ lines (emitted from the middle and uppermost of the chromosphere) and the manganese lines (emitted from the low part of the chromosphere), which show particularly prominent circular polarization, and derived the line-of-sight magnetic fields in the low, middle and uppermost parts of the chromosphere by applying weak field approximation to them. Furthermore, by combining the results with observations by the Solar Optical Telescope onboard the solar observing satellite HINODE, we obtained three-dimensional information on the magnetic field in the active region from the photosphere to the uppermost part of the chromosphere. In general, the magnetic field in the active region becomes weaker and smoother as one goes up in the sky, as reported by the CLASP2 observation (Ishikawa et al. 2021). However, in some regions, polarity reversal was observed only in the uppermost part of the chromosphere, and comparison with high spatial resolution transition layer and coronal images recorded by SDO/AIA revealed the connection between the magnetic field structure in the chromosphere and coronal loops.

R. Ishikawa↗

Simultaneous Solar Maximum Mission and Very Large Array (VLA) observations of solar active regions

Simultaneous observations of solar active regions with the Solar Maximum Mission (SMM) Satellite and the Very Large Array (VLA) have been obtained and analyzed. Combined results enhance the scientific return for beyond that expeted from using either SMM or VLA alone. A total of two weeks of simultaneous SMM/VLA data were obtained. The multiple wavelength VLA observations were used to determine the temperature and magnetic structure at different heights within coronal loops. These data are compared with simultaneous SMM observations. Several papers on the subject are in progress. They include VLA observations of compact, transient sources in the transition region; simultaneous SMM/VLA observations of the coronal loops in one active region and the evolution of another one; and sampling of the coronal plasma using thermal cyclotron lines (magnetic field - VLA) and soft X ray spectral lines (electron density and electron temperaure-SMM).

Lang, K. R.↗

Very Large Array (VLA) observations of coronal loops

Advances in ground based Very Large Array (VLA) observations of the Sun, and how they complement and extend EUV and X-ray observations from space are reviewed. The VLA provides high resolution, full disk images that include hot, dense coronal loops within individual active regions (at 20 cm), and cooler, higher, more extended structures (at 90 cm) that can connect widely separated active regions, describe high lying noise storms, or act as a transition sheath between cool dark filaments and the hot enveloping corona. VLA images of both cool and hot corona loops can be compared with data from most of the SOHO (Solar and Heliospheric Observatory) instruments, thereby enhancing the scientific return of the SOHO mission beyond that expected from using its instruments alone.

Lang, Kenneth R.↗

A forward-reverse shock pair in the solar wind driven by over-expanison of a coronal mass ejection: Ulysses observations

A previously unidentified type of solar wind forward-reverse shock pair has been observed by Ulysses at 4.64 AU and S32.5 deg. In contrast to most solar wind forward-reverse shock pairs, which are driven by the speed difference between fast solar wind plasma and slower plasma ahead, this particular shock pair was driven purely by the over-expansion of a coronal mass ejection (CME) in transit from the Sun. A simple numerical simulation indicates that the over-expansion was a result of a high initial internal plasma and magnetic field pressure within the CME. The CME observed at 4.64 AU had the internal field structure of a magnetic flux rope. This event was associated with a solar disturbance in which new magnetic loops formed in the corona almost directly beneath Ulysses approximately 11 days earlier. This association suggests that the flux rope was created as a result of reconnection between the 'legs' of neighboring magnetic loops within the rising CME.

Gosling, J. T.↗

On Heating Large Bright Coronal Loops by Magnetic Microexplosions at their Feet

In previous work, by registering Yohkoh SXT coronal X-ray images with MSFC vector magnetograms, we found that: (1) many of the larger bright coronal loops rooted at one or both ends in an active region are rooted around magnetic islands of included polarity, (2) the core field encasing the neutral line encircling the island is strongly sheared, and (3) this sheared core field is the seat of frequent microflares. This suggests that the coronal heating in these extended bright loops is driven by many small explosive releases of stored magnetic energy from the sheared core field at their feet, some of which magnetic microexplosions also produce the microflare heating in the core fields. In this paper, we show that this scenario is feasible in terms of the energy Abstract: required for the observed coronal heating and the magnetic energy available in the observed sheared core fields. In a representative active region, from the X-ray and vector field data, we estimate the coronal heating consumption by a selected typical large bright loop, the coronal heating consumption by a typical microflare at the foot of this loop, the frequency of microflares at the foot, and the available magnetic energy in the microflaring core field. We find that: (1) the rate of magnetic energy release to power the microflares at the foot (approx. 6 x 10(ext 25)erg/s) is enough to also power the coronal heating in the body of the extended loop (approx. 2 x l0(exp 25 erg/s), and (2) there is enough stored magnetic energy in the sheared core field to sustain the microflaring and extended loop heating for about a day, which is a typical time for buildup of neutral-line magnetic shear in an active region. This work was funded by the Solar Physics Branch of NASA's Office of Space Science through the SR&T Program and the SEC Guest Investigator Program.

Moore, Ronald L↗