Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solar constant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Forecasting Solar-Thermal Systems Performance under Transient Operation Using a Data-Driven Machine Learning Approach Based on the Deep Operator Network Architecture

Modeling and prediction of the dynamic behavior of thermal systems operating under intermittent energy input and variable load requirements represent one of the greatest challenges in the development of efficient and reliable renewable-based power generation technologies. In this work, a data-driven machine learning modeling framework was developed based on a modified version of the Deep Operator Network architecture where the time coordinate in the trunk net is replaced with historical data of the predicting quantity. The modeling framework can be used to accurately predict the performance of renewable-based energy conversion technologies including wind- and solar-based power plants. This novel framework was applied on a solar-thermal system that consists of a solar collection loop using a flat plate collector, a power generation loop comprising an Organic Rankine Cycle, and a thermal energy storage tank connecting both loops. Variable solar irradiance, air temperature, and power load profiles were used by the Deep Operator Network to predict the State-of-Charge and the efficiency of the thermal system for several days. The results were compared with the State-of-Charge and efficiency functions calculated using a physics-based model. For a simple operation scenario, characterized by a clear sky solar irradiance profile and constant load, the standard deviation in the State-of-Charge prediction by Deep Operator Network is below 0.9% during a seven-day prediction time horizon. For the most realistic operation scenario that considers real solar irradiance and a rough load profile, the maximum standard deviation in the predictions for the State-of-Charge and efficiency are below 6.8% and 2.5%, respectively. A comparison between Deep Operator Network and Long Short Term Memory network was also performed. In general, both networks predict very well the State-of-Charge for different data density conditions; however, a higher accuracy, with a standard deviation below 2.0%, is obtained by the Deep Operator Network during three and half days using sparser training data of 20-minute points. The same accuracy for the State-of-Charge prediction with the Long Short Term Memory network is achieved only for 14 h. Average standard deviations for the State-of-Charge prediction of 1.1% with the Deep Operator Network and 1.5% with the Long Short Term Memory network are obtained for a four-day prediction time using a denser training data of 5-minute points.

DeepONet↗

The Redox flow system for solar photovoltaic energy storage

A new method of storage was applied to a solar photovoltaic system. The storage method is a redox flow system which utilizes the oxidation-reduction capability of two soluble electrochemical redox couples for its storage capacity. The particular variant described separates the charging and discharging function of the system such that the electrochemical couples are simultaneously charged and discharged in separate parts of the system. The solar array had 12 solar cells; wired in order to give a range of voltages and currents. The system stored the solar energy so that a load could be run continually day and night. The main advantages of the redox system are that it can accept a charge in the low voltage range and produce a relatively constant output regardless of solar activity.

Odonnell, P.↗

The Redox Flow System for solar photovoltaic energy storage

The interfacing of a Solar Photovoltaic System and a Redox Flow System for storage was workable. The Redox Flow System, which utilizes the oxidation-reduction capability of two redox couples, in this case iron and titanium, for its storage capacity, gave a relatively constant output regardless of solar activity so that a load could be run continually day and night utilizing the sun's energy. One portion of the system was connected to a bank of solar cells to electrochemically charge the solutions, while a separate part of the system was used to electrochemically discharge the stored energy.

Odonnell, P.↗

Optimum solar electric interplanetary mission opportunities from 1975 to 1990

A collection of optimum trajectory and spacecraft data is presented for unmanned interplanetary missions from 1975 to 1990 using solar electric propulsion. Data are presented for one-way flyby and orbiter missions from Earth to Venus, Mars, Jupiter, Saturn, Uranus, Neptune, and Pluto. The solar system model assumes planetary ephemerides which very closely approximate the true motion of the planets. Direct and indirect flight profiles are investigated. Data are presented for two representative flight times for each mission. The launch vehicle is the Titan 3 B (core)/Centaur, and a constant jet exhaust speed solar electric propulsion system having a specific mass of 30 kg/kw is completely optimized in terms of power level and jet exhaust speed to yield maximum net spacecraft mass. The hyperbolic excess speeds at departure and arrival and the launch date are optimized for each mission. For orbiter missions, a chemical retro stage is used to brake the spacecraft into a highly eccentric capture orbit about the target planet.

Mann, F. I.↗

Simple analytical solutions for spherically symmetric production and modulation of energetic solar particles

Exact analytical solutions are presented for the standard time-independent spherically symmetric convection-diffusion-adiabatic deceleration equation governing the transport of cosmic rays in the interplanetary medium for the case in which particles are produced with spherical symmetry at the sun. It is assumed that the solar-wind speed is constant and radial, and that the spatial diffusion coefficient has a power-law dependence on momentum. The Green's function describing the modulation of a monoenergetic production of particles is presented. The solutions provide a useful basis for the study of time-integrated properties of energetic solar-flare particle spectra.

Gross, M. W.↗

Evidence for a constant speed of shock propagation between 0.8 AU and 2.2 AU

The results of preliminary analysis of the in situ observations of solar wind plasma and interplanetary magnetic field data are presented. It is indicated that two planetary shocks associated with the August 1972 solar events propagated at approximately constant speed between 0.8 AU and 2.2 AU. This result is contrary to some theoretical expectations and earlier reports for these events of a strong deceleration of these shocks with increasing heliocentric distance. One example given is the difference between observed shock speeds of 700 km/sec and the estimated speeds of 2200 km/sec for Pioneer 9 and 1000 km/sec for Pioneer 10. These higher average speeds associated with the propagation of the shocks from the sun to the spacecraft, therefore, imply an extremely strong deceleration closer to the sun (within 0.8 AU).

Intriligator, D. S.↗

Indoor tests of the concentric-tube solar collector

Report describes performance tests on 12-tube, liquid-filled collector. Thermal efficiency, change in efficiency with sun position, and time constant for temperature drop after solar flux is cut are described.

Source record↗

An SDO/AIA-Observed Filament Eruption Triggered by a Lid-Removal Onset Mechanism

An eruption of a solar filament often presages the onset of a more general solar eruption, often leading to a solar flare and coronal mass ejection (CME). Among the mechanisms suggested for triggering eruptions are flux cancellation, flux emergence, tether‐cutting reconnection, and breakout reconnection. Here we present an example of a filament eruption due to a different trigger mechanism, which we call ``lid removal,'' whereby a magnetic structure overlying the filament is removed by a preceding adjacent eruption, rendering MHD unstable the magnetic system containing the filament and resulting in the subsequent eruption of the filament. This filament eruption occurred on 23 Jan 2013, and was well‐seen in SDO/AIA 193 Ang images. Prior to its eruption the filament was at an approximately constant height above the solar surface for approx. 4 hours, before smoothly lifting off. Evidence for the overlying "lid'' field was difficult to discern in 193 Ang images, but was apparent in hotter coronal images, such as SDO/AIA 335. Removal of the lid field was due to an eruption of that field visible in the hotter‐corona images. In this way, the lid‐removal filament‐eruption mechanism is similar to recent observations of connected or cascading eruptions originating from magnetically‐linked locations.

Sterling, Alphonse C.↗

An SDO/AIA-Observed Filament Eruption Triggered by a Lid-Removal Onset Mechanism

An eruption of a solar filament often presages the onset of a more general solar eruption, often leading to a solar flare and coronal mass ejection (CME). Among the mechanisms suggested for triggering eruptions are flux cancellation, flux emergence, tether-cutting reconnection, and breakout reconnection. Here we present an example of a filament eruption due to a different trigger mechanism, which we call "lid removal,'' whereby a magnetic structure overlying the filament is removed by a preceding adjacent eruption, rendering MHD unstable the magnetic system containing the filament and resulting in the subsequent eruption of the filament. This filament eruption occurred on 23 Jan 2013, and was well-seen in SDO/AIA 193 Ang images. Prior to its eruption the filament was at an approximately constant height above the solar surface for approx 4 hours, before smoothly lifting off. Evidence for the overlying "lid'' field was difficult to discern in 193 Ang images, but was apparent in hotter coronal images, such as SDO/AIA 335. Removal of the lid field was due to an eruption of that field visible in the hotter‐corona images. In this way, the lid‐removal filament‐eruption mechanism is similar to recent observations of connected or cascading eruptions originating from magnetically‐linked locations.

Sterling, Alphonse C.↗

Noncompressive density enhancements in the solar wind

When the bulk flow speed is nearly constant or falling, high densities are sometimes observed in the solar wind. These densities do not appear to be generated in interplanetary space. It is noted that the magnetic field is not enhanced within these events, and that the proton and/or electron temperatures are low, varying in opposition to the density. About 1/3 of these density events contains interplanetary magnetic field reversals, some of which are noisy and do not qualify as sector boundaries. It is estimated that the average event contains approximately 10 to the 16th g of material and 2.6 x 10 to the 31st ergs, so that aggregated events, when they are common, make a negligible contribution to the total mass and energy budget of the solar wind at 1 AU. It is suggested that there may be an association between density enhancements and solar coronal mass ejection events.

Gosling, J. T.↗

The equivalence of three techniques for estimating ground reflectance from LANDSAT digital count data

The equivalence of three separate investigations that related LANDSAT digital count (DC) to ground measured reflectance (R) was demonstrated. One investigator related DC data to the cosZ, where Z is the solar zenith angle, for surfaces of constant R. The second investigator corrected the DC data to the solar zenith angle of 39 degrees before relating to surface R. Both of these investigators used LANDSAT 1 and 2 data from overpass dates 1972 through 1977. A third investigator calculated the relation between DC and R based on atmospheric radiative transfer theory. The equation coefficients obtained from these three investigators for all four LANDSAT MSS bands were shown to be equivalent although differences in ground reflectance measurement procedures have created coefficient variations among the three investigations. These relations should be useful for testing atmospheric radiative transfer theory.

Richardson, A. J.↗

Self-organization of the earth's biosphere-geochemical or geophysiological?

We explore the implications of indicating the biosphere's self-organization by the trend over time of the net entropic flow from the Earth's surface, the actual physical boundary of virtually all biotic mass. This flow, derived from the radiative surface entropy budget, is approximately inversely related to the surface temperature when the solar incident flux remains constant. In the geophysiological ('gaian') interpretation, biospheric self-organization has increased with the progressive colonization of the continents and evolutionary developments in the land biota, as a result of surface cooling arising from biotic enhancement of weathering. The key site for this self-organization is at the interface between land and atmosphere, the soil, where carbon is sequestered by its reaction (as carbonic and organic acids) with calcium magnesium silicates. Along with disequilibrium (steady-state) levels of carbon dioxide in the atmosphere, the occurrence of differentiated soil is the critical material evidence for biospheric self-organization, whether it be geophysiological or geochemical (ie., purely result of inorganic reactions). The computed equilibrium levels of carbon dioxide and corresponding equilibrium temperatures in the past are dramatically different from the steady-state levels. With future solar luminosity increase, the biospheric capacity for climatic regulation will decrease, leading to the ending of self-organization some two billion years from now. The Earth's surface will then approach chemical equilibrium with respect to the carbonate-silicate cycle.

Schwartzman, David W.↗

Evacuated-tube solar collector--performance evaluation

Report gives thermal performance test procedures and results for commercially produced, water-filled, 8-tube collectors. Tests include efficiency, time constant for temperature drop after solar flux is cut, change in efficiency as function of sun angle, and test to see if tubes break when filled with hot water.

Source record↗

Solar Thermal Upper Stage Cryogen System Engineering Checkout Test

The Solar Thermal Upper Stage technology (STUSTD) program is a solar thermal propulsion technology program cooperatively sponsored by a Boeing led team and by NASA MSFC. A key element of its technology program is development of a liquid hydrogen (LH2) storage and supply system which employs multi-layer insulation, liquid acquisition devices, active and passive thermodynamic vent systems, and variable 40W tank heaters to reliably provide near constant pressure H2 to a solar thermal engine in the low-gravity of space operation. The LH2 storage and supply system is designed to operate as a passive, pressure fed supply system at a constant pressure of about 45 psia. During operation of the solar thermal engine over a small portion of the orbit the LH2 storage and supply system propulsively vents through the enjoy at a controlled flowrate. During the long coast portion of the orbit, the LH2 tank is locked up (unvented). Thus, all of the vented H2 flow is used in the engine for thrust and none is wastefully vented overboard. The key to managing the tank pressure and therefore the H2 flow to the engine is to manage and balance the energy flow into the LH2 tank with the MLI and tank heaters with the energy flow out of the LH2 tank through the vented H2 flow. A moderate scale (71 cu ft) LH2 storage and supply system was installed and insulated at the NASA MSFC Test Area 300. The operation of the system is described in this paper. The test program for the LH2 system consisted of two parts: 1) a series of engineering tests to characterize the performance of the various components in the system: and 2) a 30-day simulation of a complete LEO and GEO transfer mission. This paper describes the results of the engineering tests, and correlates these results with analytical models used to design future advanced Solar Orbit Transfer Vehicles.

Olsen, A. D↗

Converter provides constant electrical power at various output voltages

Power converter, using an inverted flyback technique, transfers electrical energy at a constant rate from a solar cell source to a number of individual batteries, which are to be charged one at a time. The converter inverts the polarity of the solar cell source and provides the correct charging voltage.

Paulkovich, J.↗

The Quantasyn, an improved quantum detector

Quantasyn provides absolute measurement of radiation flux in the range 1000 A to 4500 A and into the vacuum ultraviolet. This radiation detector cimbines the high quantum efficiency and inherent linearity of the silicon solar cell with the constant quantum response of the fluorescent organic compound liumogen.

Gorstein, M.↗

Quiet-time electron increases, a measure of conditions in the outer solar system

One possible explanation for quiet-time electron increases, increases in the intensity of 3-12 MeV interplanetary electrons that have been reported by McDonald, Cline and Simnett, is discussed. It is argued that the electrons in quiet-time increases are galactic in origin, but that the observed increases are not the result of any variation in the modulation of these particles in the inner solar system. It is suggested instead that quiet-time increases may occur when more electrons than normal penetrate a modulating region that lies far beyond the orbit of earth. The number of electrons penetrating this region may increase when field lines that have experienced an unusually large random walk in the photosphere are carried by the solar wind out to the region. As evidence for this increased random walk, it is shown that five solar rotations before most of the quiet-time increases there is an extended period when the amplitude of the diurnal anisotropy, as is measured by the Deep River neutron monitor, is relatively low. Five rotations delay time implies that the proposed modulating region lies at approximately 30 AU from the Sun, assuming that the average solar wind speed is constant over this distance at approximately 400 km/sec.

Fisk, L. A.↗

A study of the variations in the thermosphere related to solar activity.

Densities derived from the drag of five artificial satellites and covering the time interval from 1958 to 1971 have been used to study the variations in the thermosphere arising from changes in solar activity. Exospheric temperatures derived from the densities by means of atmospheric models have been related to the 10.7-cm solar flux, in which the active-area component had been separated from the slow-varying clear-disk component by means of a relation between the flux and sunspot areas. When the day-to-day (27-day) variation is suppressed, the remaining slow temperature variation appears to be linearly related to the clear-disk flux component. If we also relate linearly the day-to-day temperature variations with the day-to-day variations of the flux, we find that the regression coefficient changes from 1 K at sunspot maximum to 2 K at low solar activity; a nearly constant coefficient is obtained by relating the temperature variations to the ratio of the active-area component to the clear-disk component of the flux.

Jacchia, L. G.↗