Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “simulated emission”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

The Proton and Electron Aurora as Seen by Image-FUV and FAST

The Far Ultraviolet (FUV) instrument on IMAGE images the aurora in three different wavelength regions. The Wideband Imaging Camera (WIC) observes the molecular Lyman-Birge-Hopfield (LBH) and atomic Nitrogen emissions at 140-190 nm. The two channels of the Spectrographic Imager (SI) observe the Doppler shifted Lyman Alpha emission of precipitating protons at 121.8 nm (SI 12) and the mostly electron produced emission from oxygen OI at 135.6 nm (SI13). The major advantage of FUV compared to previously flown UV imagers is the simultaneous operation of all three imaging systems without the need for filter changes and the uncertainty of temporal changes of the aurora between exposures. The FAST satellite passes every two hours through FUV images during apogee operations. This enables a comparison between the remotely imaged particle precipitation and the in-situ measurements along the FAST track. The detailed analysis of images from all three systems together with a full simulation of auroral emissions based on in-situ measurements by FAST confirms the laboratory calibrations of FUV. The spatial resolution and image quality of WIC permits the observation of a good correspondence between in-situ and remote measurements of precipitation boundaries. The clear separation between the lower latitude proton precipitation and the more structured higher latitude electron precipitation is obtained with both SI-channels.

Gerard, J.-C.↗
NASA NTRS2014

Analyzing Source Apportioned Methane in Northern California During DISCOVER-AQ-CA Using Airborne Measurements and Model Simulations

This study analyzes source apportioned methane (CH4) emissions and atmospheric concentrations in northern California during the Discover-AQ-CA field campaign using airborne measurement data and model simulations. Source apportioned CH4 emissions from the Emissions Database for Global Atmospheric Research (EDGAR) version 4.2 were applied in the 3-D chemical transport model GEOS-Chem and analyzed using airborne measurements taken as part of the Alpha Jet Atmospheric eXperiment over the San Francisco Bay Area (SFBA) and northern San Joaquin Valley (SJV). During the time period of the Discover-AQ-CA field campaign EDGAR inventory CH4 emissions were 5.30 Gg/day (Gg 1.0 109 grams) (equating to 1.9 103 Gg/yr) for all of California. According to EDGAR, the SFBA and northern SJV region contributes 30 of total emissions from California. Source apportionment analysis during this study shows that CH4 concentrations over this area of northern California are largely influenced by global emissions from wetlands and local/global emissions from gas and oil production and distribution, waste treatment processes, and livestock management. Model simulations, using EDGAR emissions, suggest that the model under-estimates CH4 concentrations in northern California (average normalized mean bias (NMB) -5 and linear regression slope 0.25). The largest negative biases in the model were calculated on days when hot spots of local emission sources were measured and atmospheric CH4 concentrations reached values 3.0 parts per million (model NMB -10). Sensitivity emission studies conducted during this research suggest that local emissions of CH4 from livestock management processes are likely the primary source of the negative model bias. These results indicate that a variety, and larger quantity, of measurement data needs to be obtained and additional research is necessary to better quantify source apportioned CH4 emissions in California and further the understanding of the physical processes controlling them.

Methane↗
DOE OSTI2021

Line confusion in spectroscopic surveys and its possible effects: shifts in Baryon Acoustic Oscillations position

ABSTRACT Roman Space Telescope will survey about 17 million emission-line galaxies over a range of redshifts. Its main targets are Hα emission-line galaxies at low redshifts (z < 2) and [O iii] emission-line galaxies at high redshifts (z > 2). The Roman Space Telescope will estimate the redshift of these galaxies with single-line identification. This suggests that other emission-line galaxies may be misidentified as the main targets. In particular, it is hard to distinguish between the H β and [O iii] lines as the two lines are close in wavelength and hence the photometric information may not be sufficient to separate them reliably. Misidentifying H β emitter as [O iii] emitter will cause a shift in the inferred radial position of the galaxy by approximately 90 Mpc h−1. This length-scale is similar to the Baryon Acoustic Oscillation (BAO) scale and could shift and broaden the BAO peak, possibly introduce errors in determining the BAO peak position. We qualitatively describe the effect of this new systematic and further quantify it with a light-cone simulation with emission-line galaxies. Our results show a systematic shift in the recovered isotropic BAO positions that depends on the percentage of interlopers (percentage of ${\rm H}\,\beta$) in the sample. The systematic shift can be as large as $0.1{-}0.3\,\mathrm{ per}\,\mathrm{ cent} \, {\rm x}\, {{\%}}{\rm H}\,\beta$ for analysis performed at redshifts z = 1.3−1.9.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

The Very High n Rydberg Series of Ar^16+ in Alcator C-Mod Tokamak Plasmas

X-ray transitions of the very high-n Rydberg series in Ar^16+ have been observed from Alcator C-Mod tokamak plasmas. Individual emission lines up to 1s16p - 1s^2 have been resolved and the central chord line brightnesses with principal quantum number n between 7 and 16 are generally found to decay as 1/n^alpha, with alpha slightly larger than 3. In the plasma periphery, emission from 1s9p - 1s^2 and 1s10p - 1s^2 are found to be significantly enhanced relative to this decrease, indicative of selected population of these levels through charge exchange between background neutral deuterium in the ground state and Ar^17+. An unresolved feature between the wavelengths of 1s27p - 1s^2 and 1s30p - 1s^2 is also present, which arises through charge exchange with neutral deuterium in the n^* = 3 excited state. The brightnesses of transitions populated by charge exchange are spatially up/down asymmetric, with an excess on the side of the magnetic surface X-point. The relative brightness of the unresolved very high-n feature compared to 1s7p - 1s^2 is found to increase with electron temperature and decrease with electron density. Simulations of line emission just on the long wavelength side of the Ar^16$ ionization limit indicate that the principal quantum number decay exponent is closer to alpha = 4 at very high n. The brightness dependence on n below 16 is in excellent agreement with calculations from the Flexible Atomic Code package.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

The very high n Rydberg series of Ar 16+ in Alcator C-Mod tokamak plasmas

We report x-ray transitions of the very high-n Rydberg series in Ar 16+ have been observed from Alcator C-Mod tokamak plasmas. Individual emission lines up to 1s16p-1s 2 have been resolved and the central chord line brightnesses with principal quantum number n between 7 and 16 are generally found to decay as 1/n α , with α slightly larger than 3. In the plasma periphery, emission from 1s9p-1s 2 and 1s10p-1s 2 are found to be significantly enhanced relative to this decrease, indicative of selected population of these levels through charge exchange between background neutral deuterium in the ground state and Ar 17+ . An unresolved feature between the wavelengths of 1s27p-1s 2 and 1s30p-1s 2 is also present, which arises through charge exchange with neutral deuterium in the n* = 3 excited state. The brightnesses of transitions populated by charge exchange are spatially up/down asymmetric, with an excess on the side of the magnetic surface X-point. The relative brightness of the unresolved very high-n feature compared to 1s7p-1s 2 is found to increase with electron temperature and decrease with electron density. Simulations of line emission just on the long wavelength side of the Ar 16+ ionization limit indicate that the principal quantum number decay exponent is closer to α = 4 at very high n. The brightness dependence on n below 16 is in excellent agreement with calculations from the flexible atomic code package.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRSDate not supplied

Modeling and Observations of OH UV-emissions in the Lunar Exosphere

The discovery of water on the Moon has led to several questions about lunar water’s origin, evolution, and total amount. One of the technique used to better understand the origin of the water, notably by the NASA LADEE/UVS instrument, is the observation of OH fluorescence. However, to better interpret the data, it is important to understand the processes leading to that emission. We present an application of the Aeroplanets model to the simulation of the OH emissions from the solar fluorescence and the dissociation of H2O from photon and electron impact in function of the solar activity. We applied the model to several cases of Lunar exosphere affected or not by meteor impacts that are known to release water in the exosphere.We show how we can retrieve the amount of OH and H2O on the line of sight of the different instruments and how the solar activity can affect that retrieval.

Guillaume Gronoff↗
DOE OSTI2023

Morphological analysis of the polarized synchrotron emission with WMAP and Planck

The bright polarized synchrotron emission, away from the Galactic plane, originates mostly from filamentary structures. We implement a filament finder algorithm which allows the detection of bright elongated structures in polarized intensity maps. We analyse the sky at 23 and 30 GHz as observed respectively by WMAP and Planck. We identify 19 filaments, 13 of which have been previously observed. For each filament, we study the polarization fraction, finding values typically larger than for the areas outside the filaments, excluding the Galactic plane, and a fraction of about 30% is reached in two filaments. We study the polarization spectral indices of the filaments, and find a spectral index consistent with the values found in previous analysis (about -3.1) for more diffuse regions. Decomposing the polarization signals into the E and B families, we find that most of the filaments are detected in P E , but not in P B . We then focus on understanding the statistical properties of the diffuse regions of the synchrotron emission at 23 GHz. Using Minkowski functionals and tensors, we analyse the non-Gaussianity and statistical isotropy of the polarized intensity maps. For a sky coverage corresponding to 80% of the fainter emission, and on scales smaller than 6 degrees (ℓ > 30), the deviations from Gaussianity and isotropy are significantly higher than 3σ. The level of deviation decreases for smaller scales, however, it remains significantly high for the lowest analised scale (~ 1.5°). When 60% sky coverage is analysed, we find that the deviations never exceed 3σ. Finally, we present a simple data-driven model to generate non-Gaussian and anisotropic simulations of the synchrotron polarized emission. The simulations are fitted in order to match the spectral and statistical properties of the faintest 80% sky coverage of the data maps.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2001

Fe(+) Emission from Eta Carinae B and D Blobs: Theory and HST Observations

We present comparisons between numerical simulations of Fe II emission spectra and HST high-resolution and signal-to-noise spectra of the Eta Carinae Weigelt B & D blobs. The spectra show a wealth of FeII and [FeII] lines. We investigate the dependence of the spectrum on electron density and on pumping by blackbody radiation. Using the photoionization code Cloudy we were able successfully reproduce the fluxes of few hundred FeII & [Fe II] lines in the range from 4000A to 6000A. Fe II emission analysis in Eta Car ejecta is very important because it provides information about excitation conditions, the electron temperature and density solved in a selfconsistent way. Moreover, for the first time we were able to use Fe II emission analysis itself to put limits on CNO abundances in emitting regions.

Verner, E.↗
DOE OSTI2026

Bremsstrahlung constraints on proton-boron 11 inertial fusion

Proton-boron 11 (pB11) fusion is relatively safe and clean, but difficult to use for net power production, since bremsstrahlung radiation tends to radiate away power more quickly than it can be generated by fusion power, particularly once poisoning by alpha particles is taken into account. While in magnetic confinement fusion, this problem can be addressed by deconfining the alphas, in inertial confinement fusion (ICF), the alphas that heat the plasma linger for the duration of the reaction. Thus, it becomes essential to trap the bremsstrahlung radiation in the hotspot. Through burn simulations incorporating bremsstrahlung emission and reabsorption, we infer the necessary conditions to capture enough radiation to produce scientific breakeven in a pB11 ICF plasma. We find that breakeven requires a stagnation areal density roughly two orders of magnitude higher than the current state-of-the-art, at pressures three orders of magnitude higher.

Alpha particles↗
DOE OSTI2023

Computer simulation of carbonization and graphitization of coal

Abstract This study describes computer simulations of carbonization and graphite formation, including the effects of hydrogen, nitrogen, oxygen, and sulfur. We introduce a novel technique to simulate carbonization, ‘Simulation of Thermal Emission of Atoms and Molecules (STEAM)’, designed to elucidate volatile outgassing and density variations in the intermediate material during carbonization. The investigation analyzes the functional groups that endure through high-temperature carbonization and examines the graphitization processes in carbon-rich materials containing non-carbon impurity elements. The physical, vibrational, and electronic attributes of impure amorphous graphite are analyzed, and the impact of nitrogen on electronic conduction is investigated.

Ugwumadu, C. (ORCID:0000000199207594)↗
DOE OSTI2023

Decomposition of multi-particle azimuthal correlations in Q-cumulant analysis*

Abstract The method of Q -cumulants is a powerful tool for studying the fine details of azimuthal anisotropies in high energy nuclear collisions. This paper presents a new method, based on mathematical induction, to evaluate the analytical form of high-order Q -cumulants. The capability of this method is demonstrated via a toy model that uses the elliptic power distribution to simulate the anisotropic emission of particles, quantified in terms of Fourier flow harmonics . The method can help in studying the large amount of event statistics that can be collected in the future and allow measurements of the very high central moments of the distribution. This can, in turn, facilitate progress in understanding the initial geometry, the input to the hydrodynamic calculations of medium expansion in high energy nuclear collisions, and the constraints on it.

Physics↗
DOE OSTI2025

Sensitivity of nEXO to 136 Xe charged-current interactions: Background-free searches for solar neutrinos and fermionic dark matter

We study the sensitivity of nEXO to solar neutrino charged-current interactions, 𝜈 𝑒 + 136 Xe → 136 Cs*+𝑒 − , as well as analogous interactions predicted by models of fermionic dark matter. Due to the recently observed low-lying isomeric states of 136 Cs, these interactions will create a time-delayed coincident signal observable in the scintillation channel. Here we develop a detailed Monte Carlo simulation of scintillation emission, propagation, and detection in the nEXO detector to model these signals under different assumptions about the timing resolution of the photosensor readout. We show this correlated signal can be used to achieve background discrimination on the order of 10 −9 , enabling nEXO to make background-free measurements of solar neutrinos above the reaction threshold of 0.668 MeV. We project that nEXO could measure the flux of neutrinos from the carbon-nitrogen-oxygen cycle with a statistical uncertainty of 25%, thus contributing a novel and competitive measurement toward addressing the solar metallicity problem. Additionally, nEXO could measure the mean energy of the 7 Be neutrinos with a precision of 𝜎 ≤ 1.5 keV and could determine the survival probability of 7 Be and pep solar 𝜈𝑒 with precision comparable to the state of the art. These quantities are sensitive to the Sun’s core temperature and to nonstandard neutrino interactions, respectively. Here, the strong background suppression would allow nEXO to search for charged-current interactions of fermionic dark matter in the mass range 𝑚 𝜒 = 0.668–7 MeV with a sensitivity up to three orders of magnitude better than current limits.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Electromagnetic Shielding Design for 200 kW Stationary Wireless Charging of Light-Duty EV

Wireless power transfer (WPT) is a developing technology with the advantage of convenience and flexible charging. SAE recommended practice J2954 defines typical size and geometry with aluminum or ferrite plate shielding to limit leakage electromagnetic (EM) fields for WPT with power levels lower than 22 kVA from the input side. However, as the WPT power goes up to 100- or 200-kW level, EM safety surrounding the WPT becomes a critical concern. To address this oncoming safety challenge, a novel ferrite shielding design is proposed in this paper. Different misalignment scenarios in accordance with definitions in SAE J2954 are also taken into consideration to ensure EM safety under various operation scenarios. Simulation results, which are preliminarily verified by magnetic field measurements at 1.1 m from the center of the vehicle side coil under 100 kW operation, indicate that the magnetic field leakage can be maintained below the limits defined in SAE J2954 for 200 kW operation. A 3.3 kW scale-down test was also carried out and compared to parallel scale-down simulations. 26.8% field emission reduction is observed from the scale-down test, which supports the effectiveness of the proposed shielding design.

Zhang, Bo↗
DOE OSTI2024

RadSim: Particle Transport Wrapper

RadSim is being developed to provide the capability to simulate radiation source emissions, interpolate results from radiation transport tools into a common format to prepare incident flux, and model radiation detector response. This software package includes wrapper API code which is utilized in the development of the second (transport) task of the RadSim project. This software package only contains tools to interface RadSim with radiation transport tools (GEANT4 and MCNP) and does not include any part of the transport source code itself. The users will need prior access to the transport tools (GEANT4 and MCNP), and can use this software package to interface with the transport tool of their choice. This software package takes the geometry file for a radiation transport problem and converts it into an input deck for the transport tools (GEANT4 and MCNP). Additionally, it also contains filters that convert the output of the transport tools to a common flux format.

Cheung, Hoi Sing↗
NASA NTRS1983

Alfven wave propagation in the Io plasma torus

Voyager 1 plasma measurements are combined with a model of Jupiter's magnetic field to calculate the time required for an Alfven wave to travel between Io and Jupiter's ionosphere, and the period of subsequent bounces between the northern and southern hemispheres of Io. The result is a wave pattern which extends around Jupiter as the multiply reflected Alfven waves are carried away from Io by the corotating magnetospheric plasma, exhibiting a general longitudinal structure which is independent of Io's position due to magnetic field geometry and Io torus plasma distribution. If the Alfven waves simulate decametric radio emission, the wave pattern predicts specific decametric emission properties for comparison with radio observation.

Bagenal, F.↗
NASA NTRS1991

Microanalysis of extended-test xenon hollow cathodes

Four hollow cathode electron sources were analyzed via boroscopy, scanning electron microscopy, energy dispersive x ray analysis, and x ray diffraction analysis. These techniques were used to develop a preliminary understanding of the chemistry of the devices that arise from contamination due to inadequate feed-system integrity and improper insert activation. Two hollow cathodes were operated in an ion thruster simulator at an emission current of 23.0 A for approximately 500 hrs. The two tests differed in propellant-feed systems, discharge power supplies, and activation procedures. Tungsten deposition and barium tungstate formation on the internal cathode surfaces occurred during the first test, which were believed to result from oxygen contamination of the propellant feed-system. Consequently, the test facility was upgraded to reduce contamination, and the test was repeated. The second hollow cathode was found to have experienced significantly less tungsten deposition. A second pair of cathodes examined were the discharge and the neutralizer hollow cathodes used in a life-test of a 30-cm ring-cusp ion thruster at a 5.5 kW power level. The cathodes' test history was documented and the post-test microanalyses are described. The most significant change resulting from the life-test was substantial tungsten deposition on the internal cathode surfaces, as well as removal of material from the insert surface. In addition, barium tungstate and molybdate were found on insert surfaces. As a result of the cathode examinations, procedures and approaches were proposed for improved discharge ignition and cathode longevity.

Verhey, Timothy R.↗
NASA NTRS1993

NASCAP programmer's reference manual

The NASA Charging Analyzer Program (NASCAP) is a computer program designed to model the electrostatic charging of complicated three-dimensional objects, both in a test tank and at geosynchronous altitudes. This document is a programmer's reference manual and user's guide. It is designed as a reference to experienced users of the code, as well as an introduction to its use for beginners. All of the many capabilities of NASCAP are covered in detail, together with examples of their use. These include the definition of objects, plasma environments, potential calculations, particle emission and detection simulations, and charging analysis.

Mandell, M. J.↗