SEARCH · Engineering Papers

Results for “simplified analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Analysis for predicting adiabatic wall temperatures with single hole coolant injection into a low speed crossflow

Assuming the local adiabatic wall temperature equals the local total temperature in a low speed coolant mixing layer, integral conservation equations with and without the boundary layer effects are formulated for the mixing layer downstream of a single coolant injection hole oriented at a 30 degree angle to the crossflow. These equations are solved numerically to determine the center line local adiabatic wall temperature and the effective coolant coverage area. Comparison of the numerical results with an existing film cooling experiment indicates that the present analysis permits a simplified but reasonably accurate prediction of the centerline effectiveness and coolant coverage area downstream of a single hole crossflow streamwise injection at 30 degree inclination angle.

Wang, C. R.↗

NASA NTRS1981

Analysis for predicting adiabatic wall temperatures with single hole coolant injection into a low speed crossflow

Assuming the local adiabatic wall temperature equals the local total temperature in a low speed coolant mixing layer, integral conservation equations with and without the boundary layer effects are formulated for the mixing layer downstream of a single coolant injection hole oriented at a 30 degree angle to the crossflow. These equations are solved numerically to determine the center-line local adiabatic wall temperature and the effective coolant coverage area. Comparison of the numerical results with an existing film cooling experiment indicates that the present analysis permits a simplified but reasonably accurate prediction of the centerline effectiveness and coolant coverage area downstream of a single hole crossflow streamwise injection at 30-deg inclination angle.

Wang, C. R.↗

NASA NTRS1981

On the utility of finite element theory for computational fluid dynamics

An implicit finite element numerical solution algorithm is derived for the compressible Navier-Stokes equations expressed in generalized coordinates. The theoretical basis utilizes a Galerkin-Weighted Residuals formulation, and extremization of approximation error within the context of a multipole expansion. A von Neumann analysis for a simplified form indicates the algorithm fourth- to sixth-order phase accurate, with third-order dissipation for the elementary linear element construction. Performance is improved for the algorithm constructed using quadratic interpolation. Numerical experiments for shocked duct flows are employed to optimize the several algorithm parameters. Additional numerical solutions validate algorithm accuracy and utility for aerodynamics applications.

Baker, A. J.↗

NASA NTRS1981

An analytical approach for predicting pilot induced oscillations

The optimal control model (OCM) of the human pilot is applied to the study of aircraft handling qualities. Attention is focused primarily on longitudinal tasks. The modeling technique differs from previous applications of the OCM in that considerable effort is expended in simplifying the pilot/vehicle analysis. After briefly reviewing the OCM, a technique for modeling the pilot controlling higher order systems is introduced. Following this, a simple criterion or determining the susceptability of an aircraft to pilot induced oscillations (PIO) is formulated. Finally, a model-based metric for pilot rating prediction is discussed. The resulting modeling procedure provides a relatively simple, yet unified approach to the study of a variety of handling qualities problems.

Hess, R. A.↗

NASA NTRS1982

Prediction of aircraft handling qualities using analytical models of the human pilot

The optimal control model (OCM) of the human pilot is applied to the study of aircraft handling qualities. Attention is focused primarily on longitudinal tasks. The modeling technique differs from previous applications of the OCM in that considerable effort is expended in simplifying the pilot/vehicle analysis. After briefly reviewing the OCM, a technique for modeling the pilot controlling higher order systems is introduced. Following this, a simple criterion for determining the susceptibility of an aircraft to pilot induced oscillations is formulated. Finally, a model based metric for pilot rating prediction is discussed. The resulting modeling procedure provides a relatively simple, yet unified approach to the study of a variety of handling qualities problems.

Hess, R. A.↗

NASA NTRS1982

Use of fiber like materials to augment the cycle life of thick thermoprotective seal coatings

Some experimental and analytical studies of plasma sprayed ZrO2-Y2O3 thick seal thermoprotective materials over NiCrAlY bond coats with testing to 1040 deg C in a Mach 0.3 burner flame are reviewed. These results indicate the need for material to have both compliance and sufficient strength to function successfully as a thick thermoprotective seal material. Fibrous materials may satisfy many of these requirements. A preliminary analysis simulating the simplified behavior of a 25 mm cylindrical SiO2-fiber material indicated significant radial temperature gradients, a relatively cool interface and generally acceptable stresses over the initial portion of the thermal cycle. Subsequent testing of these fiberlike materials in a Mach 0.3 Jet A/air burner flame confirmed these results.

Hendricks, R. C.↗

NASA NTRS1982

Prediction of aircraft handling qualities using analytical models of the human pilot

The optimal control model (OCM) of the human pilot is applied to the study of aircraft handling qualities. Attention is focused primarily on longitudinal tasks. The modeling technique differs from previous applications of the OCM in that considerable effort is expended in simplifying the pilot/vehicle analysis. After briefly reviewing the OCM, a technique for modeling the pilot controlling higher order systems is introduced. Following this, a simple criterion for determining the susceptibility of an aircraft to pilot-induced oscillations (PIO) is formulated. Finally, a model-based metric for pilot rating prediction is discussed. The resulting modeling procedure provides a relatively simple, yet unified approach to the study of a variety of handling qualities problems.

Hess, R. A.↗

NASA NTRS1982

Benchmark notch test for life prediction

The laser Interferometric Strain Displacement Gage (ISDG) was used to measure local strains in notched Inconel 718 test bars subjected to six different load histories at 649 C (1200 F) and including effects of tensile and compressive hold periods. The measurements were compared to simplified Neuber notch analysis predictions of notch root stress and strain. The actual strains incurred at the root of a discontinuity in cyclically loaded test samples subjected to inelastic deformation at high temperature where creep deformations readily occur were determined. The steady state cyclic, stress-strain response at the root of the discontinuity was analyzed. Flat, double notched uniaxially loaded fatigue specimens manufactured from the nickel base, superalloy Inconel 718 were used. The ISDG was used to obtain cycle by cycle recordings of notch root strain during continuous and hold time cycling at 649 C. Comparisons to Neuber and finite element model analyses were made. The results obtained provide a benchmark data set in high technology design where notch fatigue life is the predominant component service life limitation.

Domas, P. A.↗

NASA NTRS1984

Determination of the succinonitrile-benzene and succinonitrile-cyclohexanol phase diagrams by thermal and UV spectroscopic analysis

Equilibrium temperature-composition diagrams were determined for the two organic systems, succinonitrile-benzene and succinonitrile-cyclohexanol. Measurements were made using the common thermal analysis methods and UV spectrophotometry. Succinonitrile-benzene monotectic was chosen for its low affinity for water and because UV analysis would be simplified. Succinonitrile-cyclohexanol was chosen because both components are transparent models for metallic solidification, as opposed to the other known succinonitrile-based monotectics.

Kaukler, W. F.↗

NASA NTRS1984

Patterns of magnetic field merging sites on the magnetopause

Models of the magnetospheric and magnetosheath magnetic fields are used to determine the relative orientations of the two near the dayside magnetopause for the purpose of locating potential merging sites. Areas of the magnetopause with various degrees of antiparallelness for different Interplanetary fields as contour diagrams are studied. For southward and GSE-Y interplanetary field, the patterns obtained are consistent with those envisioned by Crooker in an earlier analysis which used simplified representations for the magnetic field geometry. Here the application of realistic models shows the locations of areas where any antiparallel component occurs. Merging sites for radial interplanetary fields are also illustrated. The results suggest that the geometrical configuration of the fields is suitable for merging over a large fraction of the magnetopause for interplanetary fields that are either primarily southward, GSE-Y, or radial (GSE-X) in direction.

Luhmann, J. G.↗

NASA NTRS1984

Radiation-conduction interaction in large space structures

The effects of a penumbra due to the long wave radiation emitted by the earth or to solar energy reflected from the earth on temperature distributions, deflections and stresses in plates are studied to determine their importance in the design of space structures. An examination of the state of stress in a thin plate exposed to the sun suggests that deflections are only slightly modified by the penumbra, but that stresses in the vicinity of the shadow line are more affected. Even with the smoothing due to the penumbra, these stresses should be considered in the design of space structures. A simple relationship is given by which albedo viewfactors can be easily derived from the direct viewfactor, thus simplifying the radiation analysis.

Emery, A. F.↗

NASA NTRS1986

Dynamic delamination crack propagation in a graphite/epoxy laminate

The dynamic delamination crack propagation behavior during ballistic tests of (90/0)5s T-300/934 graphite/epoxy laminates with embedded interfacial cracks was investigated using high speed photography. The impact on the beam-like specimen was produced with a silicon rubber ball, and the crack propagation speeds and the threshold impact velocities required to initiate dynamic crack propagation were determined for several crack positions. The results suggest that the mode of crack propagation depends on the specimen geometry as well as the loading condition. A simplified finite element analysis of the experimental data obtained from one of the midplane-cracked specimens was used to estimate the critical strain energy release rate, which may determine the onset of unstable crack propagation.

Sun, C. T.↗

NASA NTRS1987

Study of free-piston Stirling engine driven linear alternators

The analysis, design and operation of single phase, single slot tubular permanent magnet linear alternator is presented. Included is the no-load and on-load magnetic field investigation, permanent magnet's leakage field analysis, parameter identification, design guidelines and an optimal design of a permanent magnet linear alternator. For analysis of the magnetic field, a simplified magnetic circuit is utilized. The analysis accounts for saturation, leakage and armature reaction.

Nasar, S. A.↗

NASA NTRS1988

Optimum design of geodesically stiffened composite plates

With the goal of tailorability in mind, the in-plane stiffness characteristics of a particular grid stiffened plate configuration under axial and shear loads have been studied. The contribution of the skin to the stiffener network and the resultant skin/rib interaction is analyzed. For the given plate geometry and loads, it is shown that an optimum configuration does exist. To achieve optimally designed practical plate configurations, buckling constraints need to be included in the design. Due to the complex geometry and loading of the plates, a simplified local buckling analysis of isolated stiffeners and triangular skin elements between the stiffeners is considered. Development of a stiffener buckling analysis represent stiffeners as shear deformable plate elements is presented.

Guerdal, Zafer↗

NASA NTRS1988

Methodology for determination and use of the no-escape envelope of an air-to-air-missile

A large gap exists between optimal control and differential-game theory and their applications. The purpose of this paper is to show how this gap may be bridged. Missile-avoidance of realistically simulated infrared heat-seeking, fire-and-forget missile is studied. In detailed simulations, sweeping out the discretized initial condition space, avoidance methods based on pilot experience are combined with those based on simplified optimal control analysis to derive an approximation to the no-escape missile envelopes. The detailed missile equations and no-escape envelopes were then incorporated into an existing piloted simulation of air-to-air combat to generate missile firing decisions as well as missile avoidance commands. The use of these envelopes was found to be effective in both functions.

Neuman, Frank↗

NASA NTRS1990

Rotorcraft blade/vortex interaction noise - Its generation, radiation, and control

Recent results are presented from several research efforts aimed at the understanding of rotorcraft blade-vortex interaction noise generation, directivity, and control. The results are based on work performed by researches at the NASA Langley Research Center, both alone and in collaboration with other research organizations. Based on analysis of a simplified physical model, the critical parameters controlling the noise generation are identified. Detailed mapping of the acoustic radiation field reveals the extreme sensitivity of directivity to rotor advance ratio and disk attitude. A means of controlling blade-vortex interaction noise by higher harmonic pitch control is discussed.

Preisser, J. S.↗

NASA NTRS1992

Nested Neural Networks

Report presents analysis of nested neural networks, consisting of interconnected subnetworks. Analysis based on simplified mathematical models more appropriate for artificial electronic neural networks, partly applicable to biological neural networks. Nested structure allows for retrieval of individual subpatterns. Requires fewer wires and connection devices than fully connected networks, and allows for local reconstruction of damaged subnetworks without rewiring entire network.

Baram, Yoram↗

NASA NTRS1993

Heat transfer in rocket engine combustion chambers and nozzles

Complexities of liquid rocket engine heat transfer which involve the injector faceplate and regeneratively and film cooled walls are being investigated by computational analysis. A conjugate heat transfer analysis will be used to describe localized heating phenomena associated with particular injector configurations and coolant channels and film coolant dumps. These components are being analyzed, and the analyses verified with appropriate test data. Finally, the component analyses will be synthesized into an overall flowfield/heat transfer model. The FDNS code is being used to make the component analyses. Particular attention is being given to the representation of the thermodynamic properties of the fluid streams and to the method of combining the detailed models to represent overall heating. Unit flow models of specific coaxial injector elements have been developed and will be described. Since test data from the NLS development program are not available, new validation heat transfer data have been sought. Suitable data were obtained from a Rocketdyne test program on a model hydrocarbon/oxygen engine. Simulations of these test data will be presented. Recent interest in the hybrid motor have established the need for analyses of ablating solid fuels in the combustion chamber. Analysis of a simplified hybrid motor will also be presented.

Anderson, P. G.↗