Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shock waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Cross-Measurement Comparisons for a CFD Validation Dataset on Mach 2.5 Axisymmetric Turbulent Shock-Wave/Boundary-Layer Interactions

Experimental data for a shock-wave/boundary-layer interaction has been collected using multiple measurement techniques. Unfortunately, diversity of methods for acquisition begets an aggregation of data which does not directly quantify the same properties of the flowfield. The objective in this paper was to (a) present the collection of flowfield measurements in one venue in a format more usable for those validating CFD models against the data, (b) evaluate the degree to which the experimental data support each other, and (c) highlight the differences and relative advantages/shortcomings of each measurement techniques. To present the various measured quantities into common format, CFD results from a companion paper also submitted for presentation at this meeting are utilized. For the case where the boundary layer remains attached, there is agreement between the various measurements as well as with Reynolds-averaged Navier-Stokes simulation solutions. As the impinging shock strength is increased beyond the point of separating the boundary layer, the congruity of the data wanes. Generally, agreement among the measurements exceeds the degree to which the CFD solutions agree with experiments. This suggests that unmodeled physical phenomena, such as transient motion of the reflected shock and separation bubble, give rise to the discrepancies observed in the computational results.

Shock-wave Boundary-layer interaction↗

Propagation pattern of interplanetary shock waves associated with solar proton flares

The two dimensional pattern of interplanetary shock waves is deduced by taking into account the solar longitude dependence of the time intervals between SSC geomagnetic storms and responsible flares. This pattern near the earth's orbit is not symmetric with respect to the meridian plane which crosses the position of the flare, and the highest speed of this wave propagation is observed in the direction about 30 degrees east of this meridian plane. The magnitude of the Forbush decreases of galactic cosmic rays also varies with the longitude positions of those flares. This is used to estimate the distribution of magnetic fields behind the shock waves.

Sakurai, K.↗

Shock-wave properties and high-pressure equations of state of geophysically important materials

Shock wave (Hugoniot), shock temperature, and release data are presented for several geophysically important, refractory materials. A sensitive multichannel optical pyrometer was developed to measure shock temperatures (2500 to 5600 K at pressures from 48 to 117 GPa) in anorthite (CaAl2Si2O8) glass. Shock temperatures of 3750 to 6000 K at pressures from 140 to 182 GPa were measured in calcium oxide (CaO). Temperature data were used to constrain the energetics of the B1-B2 phase transition at 70 GPa in CaO, and to construct a finite strain equation of state for CaO consistent with previous Hugoniot data. The CaO equation of state was used with equation of state parameters of other oxides to construct a theoretical mixed oxide Hugoniot of anorthite, which is in agreement with new Hugoniot data above about 50 GPa, determined using experimental techniques developed. The mixed oxide model, however, overestimates the shock temperatures, and does not accurately predict measured release paths.

Boslough, M. B.↗

Fluid-Thermal-Structural Interactions in Ramp-Induced Shock-Wave Boundary-Layer Interactions at Mach6

Shock-wave boundary-layer interactions (SWBLI) pose unique challenges for the slender airframes and sharp control surfaces characteristic of high-speed airbreathing aircraft. Spikes in pressure and thermal loading have been shown to occur in SWBLI regions; thus, predicting their location and behavior proves critical for assuring aircraft structural integrity and fatigue resilience. SWBLIs frequently lead to severe turbulent boundary-layer separation and corresponding unsteady motions characterized by a wide range of frequencies. Low-frequency motion has been shown to couple with the structure of a compliant panel, and turbulent boundary layers thus present a particular danger for thin control surfaces. Previous studies have shown that the thermal loading on a compliant panel in a ramp-induced SWBLI may have a signi cant impact on the panel vibrations. A multitude of studies has investigated the heating on rigid structures, but a charactrization of the heating effects on compliant structures is necessary to fully understand the fluid-thermal-structural interactions (FTSI) occurring in ramp-induced SWBLIs. This studuses infrared thermography and high-frequency Kulite pressure transducers to examine the heating loads on rigid and compliant ramps at various angles and flow conditions at Mach 6.

Hypersonic↗

Ion Acceleration in Fermi-LAT Behind-the-Limb Solar Flares: The Role of Coronal Shock Waves

Here, we investigate the relationship between the gamma-ray emission measured with Fermi-LAT and radio signatures of coronal shock waves in four behind-the-limb (BTL) solar flares. All events were associated with metric type II radio burst. Both start and end times of the radio bursts were synchronized with the gamma-ray emission. The type II bursts associated with the BTL gamma-ray flares had higher speeds and lower formation heights than those of an average sample. These findings support the notion that the highly relativistic ions that produce the gamma-rays in BTL flares are accelerated at CME-driven propagating coronal shock waves rather than in large-scale coronal loops.

Corona↗

Flow separation in oblique shock wave turbulent boundary layer interactions

Available experimental data on flow separation in shock wave turbulent boundary layer interactions are reviewed at hypersonic and supersonic speeds in two dimensional and axisymmetric interactions. The conditions leading to flow separation and the subsequent changes in the flow are discussed. The effects of the Mach number, Reynolds number, surface cooling and the methods of detecting separation are discussed. Pertinent experimental data for the separated flow characteristics in turbulent boundary layer oblique shock wave interactions are also presented and discussed. Empirical correlations for separated flows are also reviewed.

Hamed, A.↗

Observations of a Coronal Shock Wave and the Production of Solar Energetic Particles

We present a study that clarifies the acceleration source/mechanism of the solar energetic particle (SEP) event on 2011 August 9. Based on the assumption of scatter-free propagation of charged particles along the interplanetary magnetic field, the solar particle release times of the electrons and protons are derived and both found to be in the decay phase of the flare emission. Furthermore, we compare the peak-flux spectra of the in situ particles and the remote-sensing hard X-ray photons and find a weak correlation between them. In particular, we note that an extreme ultraviolet shock wave, presumed to be a signature of coronal mass ejection (CME) shock front on the solar surface, and an associated type II radio burst were observed alongside this event. Under the framework of diffusive shock acceleration, the derived shock compression ratio can accelerate particles with a theoretical spectral index γ=2.14{sub −0.02}{sup +0.01}, which is comparable to the observational index of ∼2.0. Our results appear to support the notion that the coronal shock wave was most likely responsible for the SEP event. Specifically, we find that the electrons were released in a low coronal site at ∼0.58 solar radii, and protons were released when the CME-driven shock propagated to ∼1.38 solar radii. The multi-spacecraft observations, in addition, reveal the connection between the acceleration of shock waves and the release of SEPs.

79 ASTRONOMY AND ASTROPHYSICS↗

Gas-grain energy transfer in solar nebula shock waves: Implications for the origin of chondrules

Meteoritic chondrules provide evidence for the occurrence of rapid transient heating events in the protoplanetary nebula. Astronomical evidence suggests that gas dynamic shock waves are likely to be excited in protostellar accretion disks by processes such as protosolar mass ejections, nonaxisymmetric structures in an evolving disk, and impact on the nebula surface of infalling 'clumps' of circumstellar gas. Previous detailed calculations of gas-grain energy and momentum transfer have supported the possibility that such shock waves could have melted pre-existing chondrule-sized grains. The main requirement for grains to reach melting temperatures in shock waves with plausibly low Mach numbers is that grains existed in dust-rich zones (optical depth greater than 1) where radiative cooling of a given grain can be nearly balanced by radiation from surrounding grains. Localized dust-rich zones also provide a means of explaining the apparent small spatial scale of heating events. For example, the scale size of at least some optically thick dust-rich zones must have been relatively small (less than 10 kilometers) to be consistent with petrologic evidence for accretion of hot material onto cold chondrules. The implied number density of mm-sized grains for these zones would be greater than 30 m(exp -3). In this paper, we make several improvements of our earlier calculations to include radiation self-consistently in the shock jump conditions, and we include heating of grains due to radiation from the shocked gas. In addition, we estimate the importance of momentum feedback of dust concentrations onto the shocked gas which would tend to reduce the efficiency of gas dynamic heating of grains in the center of the dust cloud.

Hood, L. L.↗

Diffusive cosmic ray acceleration at relativistic shock waves with magnetostatic turbulence. II. Influence of a finite downstream medium

The diffusive acceleration of relativistic cosmic rays at parallel shock waves with magnetostatic turbulence and a finite size of the downstream medium is investigated. For ultrarelativistic shock speeds with Lorentz factor Γ{sub 1}≫1, both the differential momentum spectrum at the shock and the volume-integrated momentum spectrum are power-law distribution functions with different spectral indices as compared to the case of an infinitely extended downstream medium. However, the spectral differences are only modest as compared to the case of nonrelativistic shocks. The behavior of the momentum spectrum of shock-accelerated particles depends sensitively on the relativistic shock wave Peclet number G(p)=τ{sub D}(p)/τ{sub C}, i.e., the ratio between the diffusion and convection timescales of cosmic rays to propagate from the shock position to the downstream boundary z {sub 0}. For large values of G(p)≫1 the free-escape boundary has no influence on the effectiveness of particle acceleration, still providing a flat momentum power-law spectrum of the accelerated particles. In the opposite case of small Peclet numbers G(p)≪1 at all momenta, the momentum spectrum at the shock steepens to the greater spectral index ξ{sub 0}=3−s+(3.18/Γ{sub 1}), whereas the volume-integrated momentum spectrum flattens by the same factor 2−s for its power-law spectral index, where s denotes the spectral index of the downstream power spectrum of magnetostatic turbulence. This effectiveness of relativistic shocks in generating flat power-law momentum spectra irrespective of the Peclet number G(p) differs completely from the behavior of nonrelativistic shocks.

79 ASTRONOMY AND ASTROPHYSICS↗

Shock wave formation from head-on collision of two subsonic vortex rings

Vortex ring collisions have attracted intense interest in both water and air studies (Baird in Proc R Soc Lond Ser Math Phys Sci 409:59–65, 1987, Poudel et al. in Phys Fluids 33:096105, 2021, Lim and Nickels in Nature 357:225, 1992, New et al. in Exp Fluids 57:109, 2016, Suzuki et al. in Geophys Res Lett 34, 2007, Yan et al. in J Fluids Eng 140:054502, 2018, New et al. in J Fluid Mech 899, 2020, Cheng et al. in Phys Fluids 31:067107, 2019, Hernández and Reyes in 29:103604, 2017, Mishra et al. in Phys Rev Fluids, 2021, Zednikova et al. in Chem Eng Technol 42:843–850, 2019, Kwon et al. in Nature 600:64–69, 2021). These toroidal structures spin around a central axis and travel in the original direction of impulse while spinning around the core until inertial forces become predominant causing the vortex flow to spontaneously decay to turbulence (Vortex Rings, https://projects.iq.harvard.edu/smrlab/vortex-rings). Previous studies have shown the collision of subsonic vortex rings resulting in reconnected vortex rings, but the production of a shock wave from the collision has not been demonstrated visibly (Lim and Nickels in Nature 357:225, 1992, Cheng et al. in Phys Fluids 31:067107, 2019). Here we present the formation of a shock wave due to the collision of explosively formed subsonic vortex rings. As the vortex rings travel at Mach 0.66 toward the collision point, they begin to trap high pressure air between them. Upon collision, high pressure air was imploded and released radially away from the axis of the collision, generating a visible shock wave traveling through and away from the colliding vortices at Mach 1.22. Our results demonstrate a pressure gradient with high pressure release creating a shock wave. We anticipate our study to be a starting point for more explosively formed vortex collisions. For example, explosives with different velocities of detonation could be tested to produce vortex rings of varying velocities.

42 ENGINEERING↗

Reflection of a shock wave from a thermally accommodating wall - Molecular simulation.

Reflection of a plane shock wave from a wall has been simulated on a microscopic scale using a direct simulation Monte Carlo technique of the type developed by Bird. A monatomic gas model representing argon was used to describe the fluid medium and a simple one-parameter accommodation coefficient model was used to describe the gas-surface interaction. The influence of surface accommodation was studied parametrically by varying the accommodation coefficient from zero to one. Results are presented showing the temporal variations of flow field density, and mass, momentum, and energy fluxes to the wall during the shock wave reflection process. The energy flux was used to determine the wall temperature history. Comparisons with experiment are found to be satisfactory where data are available.

Deiwert, G. S.↗

Numerical Simulation of Inlet Bleed with Circular Holes on Plate Under Shock-Wave/Boundary-Layer Interactions

A numerical study was performed to investigate the shock-wave/boundary-layer interactions on a flat plate with bleed through one or more circular holes that vent into a plenum. The bleed-hole patterns considered for the study include in-line multiple holes and staggered multiple-row holes that are configured to simulate the patterns used in inlet bleed systems of high performance aircraft. The focus of the study was to examine how the bleed through multiple holes affect bleed rate and the pressure and Mach number distributions. Since the bleed performance was found sensitive to the change in bleed conditions, a computational procedure was developed to give a good turnaround computational time for parametric studies involving changes in bleed hole geometry and the structure of shock-wave/boundary-layer flowfield. The procedure includes the grid-generation methodology and the flow simulation with solutions from the Navier-Stokes equations. The computational techniques permit analysis of complex bleed systems and make possible the investigation of a broader range of design variables associated with inlet bleed operation.

Chyu, Wei J.↗

CARBON, HELIUM, AND PROTON KINETIC TEMPERATURES IN A CYGNUS LOOP SHOCK WAVE

Observations of SN 1006 have shown that ions and electrons in the plasma behind fast supernova remnant shock waves are far from equilibrium, with the electron temperature much lower than the proton temperature and ion temperatures approximately proportional to ion mass. In the ∼360 km s{sup −1}shock waves of the Cygnus Loop, on the other hand, electron and ion temperatures are roughly equal, and there is evidence that the oxygen kinetic temperature is not far from the proton temperature. In this paper, we report observations of the He ii λ1640 line and the C iv λ1550 doublet in a 360 km s{sup −1}shock in the Cygnus Loop. While the best-fit kinetic temperatures are somewhat higher than the proton temperature, the temperatures of He and C are consistent with the proton temperature and the upper limits are 0.5 and 0.3 times the mass-proportional temperatures, implying efficient thermal equilibration in this collisionless shock. The equilibration of helium and hydrogen affects the conversion between proton temperatures determined from Hα line profiles and shock speeds, and the efficient equilibration found here reduces the shock speed estimates and the distance estimate to the Cygnus Loop of Medina et al. to about 800 pc.

79 ASTRONOMY AND ASTROPHYSICS↗

Shock waves and double layers in electron degenerate dense plasma with viscous ion fluids

The properties of ion-acoustic shock waves and double layers propagating in a viscous degenerate dense plasma (containing inertial viscous ion fluid, non-relativistic and ultra-relativistic degenerate electron fluid, and negatively charged stationary heavy element) is investigated. A new nonlinear equation (viz. Gardner equation with additional dissipative term) is derived by the reductive perturbation method. The properties of the ion-acoustic shock waves and double layers are examined by the analysis of the shock and double layer solutions of this new equation (we would like to call it “M-Z equation”). It is found that the properties of these shock and double layer structures obtained from this analysis are significantly different from those obtained from the analysis of standard Gardner or Burgers’ equation. The implications of our results to dense plasmas in astrophysical objects (e.g., non-rotating white dwarf stars) are briefly discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interaction of a weak shock wave with a discontinuous heavy-gas cylinder

The interaction between a cylindrical inhomogeneity and a weak planar shock wave is investigated experimentally and numerically, and special attention is given to the wave patterns and vortex dynamics in this scenario. A soap-film technique is realized to generate a well-controlled discontinuous cylinder (SF{sub 6} surrounded by air) with no supports or wires in the shock-tube experiment. The symmetric evolving interfaces and few disturbance waves are observed in a high-speed schlieren photography. Numerical simulations are also carried out for a detailed analysis. The refracted shock wave inside the cylinder is perturbed by the diffracted shock waves and divided into three branches. When these shock branches collide, the shock focusing occurs. A nonlinear model is then proposed to elucidate effects of the wave patterns on the evolution of the cylinder. A distinct vortex pair is gradually developing during the shock-cylinder interaction. The numerical results show that a low pressure region appears at the vortex core. Subsequently, the ambient fluid is entrained into the vortices which are expanding at the same time. Based on the relation between the vortex motion and the circulation, several theoretical models of circulation in the literature are then checked by the experimental and numerical results. Most of these theoretical circulation models provide a reasonably good prediction of the vortex motion in the present configuration.

42 ENGINEERING↗